ATD Tools ATD-5188 User's Manual
Contents
1. ATD 5188 18 GALLON WASTE OIL DRAIN W CASTER INSTRUCTION MANUAL SAVE THIS MANUAL You will need this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures parts list and assembly diagram Keep your invoice with this manual Keep this manual in a safe and dry place for future reference SPECIFICATIONS Item Description Maximum Holding Capacity 18 gallon Funnel Dimensions 17 diameter x10 deep 1 1 2 diameter drain Tank Dimensions 18 diameter x26 1 4 height Barrel Pump Port 2 1 4 DIA 13 TPI standard barrel pump mount opening Adjustable Height 36 minimum height 70 maximum height Waste Drain Dimensions 2 1 2 O D 3 4 standard thread Net Weight 22 8 Pounds GENERAL SAFETY WARNINGS AND PRECAUTIONS 1 Keep work area clean and dry Cluttered damp or wet work areas invite injuries 2 Keep children away from work area Do not allow children to handle this product 3 Store idle equipment When not in use tools and equipment should be stored in a dry location to inhibit rust Always lock up tools and equipment and keep them out of reach of children 4 Do not use this product if under the influence of alcohol or drugs Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs If there is any doubt do not attempt to use this product 5 Use eye protection W2. RIBUTOR MAKES ANY REF PRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO 7 CASTER 8 VAVE PRT5180 09 o LONGBOLT REV 12 08 NOTE Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts
3. ear ANSI approved safety impact eye goggles when using this product 6 Dress safely Do not wear loose clothing or jewelry as they can become caught in moving parts Wear a protective hair covering to prevent long hair from becoming caught in moving parts 7 Do not overreach Keep proper footing and balance at all times to prevent tripping falling and related injuries 8 Industrial applications must follow OSHA requirements 9 Stay alert Watch what you are doing at all times Use common sense Do not use this product when you are tired or distracted from the job at hand 10 Check for damaged parts Before using this product carefully check that it will operate properly and perform its intended function Check for damaged parts and any other conditions that may affect the operation of this product Replace or repair damaged or worn parts immediately 11 Replacement parts and accessories When servicing use only identical replacement parts Only use accessories intended for use with this product Approved accessories are available from your local ATD jobber or distributor 12 Maintain this product with care Keep this product clean and dry during storage for better and safer performance For your safety service and maintenance should be performed regularly by a qualified technician 13 Use the right equipment for the job Do not attempt to force small equipment to do the work of a larger industrial tool There are certain applicatio
4. ised vehicle making sure the funnel 2 is positioned directly below the oil drain plug of the engine 8 Raise the upper tube 3 and funnel 2 until the funnel 2 sits approximately 4 directly below the oil drain plug of the engine Then tighten the adjustable clamp 5 to hold the upper tube lower tube and the funnel in place 9 Remove the oil drain plug of the engine and allow the old oil to completely drain from the engine into the funnel 2 of the 18 gallon oil drain 10 Once the old engine oil is completely drained replace the oil drain plug of the engine 11 When emptying the old oil from the tank 6 of the oil drain make sure to follow guidelines for engine oil disposal If necessary contact your local solid liquid waste authority for information on recycling and or disposal INSPECTION MAINTENANCE AND CLEANING 1 Before each use inspect the general condition of the oil drain Check for broken or bent parts loose or missing parts and any condition that may affect the proper operation of the product If a problem occurs have the problem corrected before further use Do not use damaged equipment 2 When cleaning use a clean cloth with a detergent or mild solvent Then store the oil drain in a safe and dry location PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEIGHER THE MANUFACTURER OR DIST
5. ns for which this equipment was designed It will do the job better and more safely at the rate for which it was intended Do not modify this equipment and do not use this equipment for a purpose for which it was not intended 14 WARNING The warnings precautions and instructions discussed in this manual cannot cover all possible conditions and situations that may occur The operator must understand that common sense and caution are factors which cannot be built into this product but must be supplied by the operator SPECIFIC PRODUCT WARNING AND PRECAUTIONS 1 Make sure the oil drain is used only on a dry oil grease free flat level ground surface capable of supporting the weight of the unit and contents 2 Do not work under the vehicle without proper support devices 3 Prior to using the oil drain dolly make sure to read and understand all warnings safety precautions and instructions as outlined in the vehicle manufacturers and the support device s instruction manuals 4 Do not use the oil drain with the vehicle s engine running A vehicle s engine that is running produces odorless invisible carbon monoxide vapors which if inhaled may cause serious injury or death 5 Do not allow anyone in the vehicle while using the oil drain Keep all bystanders a safe distance away from the vehicle 6 Avoid burns Allow the engine oil to completely cool before draining the oil into the Oil Drain Dolly 7 Do not leave the oil drain
6. unattended when operating or evacuating oil Never use the oil drain near open flames or heat sources 9 Make sure to remove the oil drain and all other tools and equipment before lowering the vehicle to the floor surface 10 Follow guidelines for engine oil disposal Used engine oil should be removed form the vehicle and properly disposed of or recycled Many states require recycling Contact your local solid liquid waste authority for information on recycling and or disposal 11 Oil contains hazardous chemicals which may be harmful to the environment and hazardous to your health OG ASSEMBLY AND OPERATING INSTRUCTIONS NOTE Please refer to the assembly diagram for the following installation and operating instructions 1 Insert funnel 2 into upper tube 3 and secure it tightly by two screws 1 2 Connect the upper tube 3 into the lower tube 4 and secure it tightly by bolt 9 washer 10 and nut 11 3 Put the lower tube 4 into the tank 6 and secure it by tightening the adjusting clamp 5 This completes the assembly WARNING Make sure the vehicle is properly and securely raised on the lift before raising the Oil Drain into place Follow all safety precautions outlined in this manual and the vehicle s manual 6 To operate the oil drain slightly unscrew the adjustable clamp 5 and allow the two tubes and the funnel 2 to slide downward to the lowest position 7 Move the 18 gallon oil drain under the ra
Download Pdf Manuals
Related Search