Astatic WM-625S User's Manual
Contents
1. and 27 4 1 5 64 deep The weight shall be 103 grams 3 6 oz CE Specifications Element Dynamic Pattern Omnidirectional Frequency Response 150 to 4500 Hz Output Level 62 dB 0dB 1 volt microbar Impedance 500 ohms Switch DPDT Push to Operate Snap action switch Dimensions See outline drawing on other side Weight 103 grams 3 6 oz Finish Brushed Stainless Steel SPECIFICATIONS FOR WM625 WM625S FREQUENCY RESPONSE CURVE RESPONSE IN dB FREQUENCY IN HERTZ TWO YEAR LIMITED WARRANTY Omnitronics LLC ASTATIC hereby warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase In the unlikely event a defect occurs ASTATIC will at its option either repair or replace with a new unit of equal or greater value You should retain proof of purchase to validate the purchase date and return it with any warranty claim Return warranty claims carefully packed insured and prepaid to the Service Department 341 Harbor St e Conneaut OH 44030 This warranty excludes exterior finish or appearance damage from abuse misuse of the product use contrary to ASTATIC s instructions or unauthorized repair All implied warranties or merchantability or fitness for a particular purpose are hereby disclaimed and ASTATIC hereby disclaims liability for incidental special or consequential damages resulting from the use or unavailabilit2. WM625 WM625S Wall Mounted Dynamic Microphone Commercial Audio Products Description The Astatic Models WM 625 and WM 625S are omnidirectional dynamic microphones designed especially for mounting to wall outlet boxes The frequency response is shaped to provide crisp clear highly intelligible voice communications Both models have a self contained rugged low impedance dynamic cartridge assembly The WM 625S has a simple push to operate DPDT snap action switch suitable for almost all switching requirements APPLICATIONS The Models WM 625 and WM 625S are excellent choices for intercom and P A applications in warehouses factories schools restaurants and fast food outlets apartment houses security detection etc 2 LEAD WIRES APPROX 76 2MM 3 LONG ARCHITECTS AND ENGINEERS 70 3mm n SPECIFICATIONS e 8 The microphone shall be an Astatic WM 625 or WM 625S It will be a dynamic moving coil type with a diaphragm made of polyester The frequency response shall be from 150 to 4500 Hz The microphone will have an omnidirectional polar pattern The output level will be 68dB 0 dB 1 volt microbar 4 0 mv PA The microphone shall be fitted on a brushed stainless steel plate designed especially for mounting to wall outlet boxes The WM 625S model will have a DPDT momentary snap action push to operate switch The overall dimensions shall be 114 7mm 4 33 64 long 70 3mm 2 49 64 wide
3. y of this product This warranty gives you specific legal rights and you may also have other rights which vary from state to state Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the above exclusions and limitations may not apply to you Note No other warranty written or oral is authorized by Omnitronics LLC p n 46873 45 00 revl 5 25 04 J M S
Download Pdf Manuals
Related Search