Apple eMac 073-0704 User's Manual
Contents
1. Stand Installation 6 14 Carefully turn the computer over Stand Installation 7 eMac ATI Graphics and eMac USB 2 0 Installation Procedure To install the eMac ATI Graphics or eMac USB 2 0 stand 1 2 Save open documents and quit all open applications Turn the computer off by choosing Shut Down from the Special menu if using Mac OS 9 or choose Shut Down from the Apple menu if using OS X Unplug all cables Place a soft towel or cloth on the desk or surface Turn the computer over to access the screw holes on the bottom Stand Installation 8 6 The stand attaches to the locations circled below Stand Installation 9 8 Position the stand in place over the screw holes a A 9 Note The stand slides back and forth To attach the first screw slide the stand toward the back of the computer A ait Stand Installation 10 10 Push the stand forward Tighten the second screw Stand Installation 11 12 Carefully turn the computer over Stand Installation 12 Apple Computer Inc 2004 Apple Computer Inc All rights reserved This document is protected under U S Copyright Law and International Treaties and no part of this document may be reproduced in any form without written permission from Apple Apple is not responsible for typographical printing or inadvertent errors Apple Computer Inc 1 Infinite Loop Cupe2. eMac Computers Stand Installation Installing the Optional Stand Follow the instructions for the type of eMac that you have The procedure for installing the stand on the eMac ATI Graphics and eMac USB 2 0 is slightly different from the original eMac model Note Written and video instructions covering customer installable parts are available at http www info apple com installparts Tools Required No tools are required The tool is supplied with the stand 073 0704 Rev C eMac Installation Procedure To install the eMac stand 1 2 Save open documents and quit all open applications Turn the computer off by choosing Shut Down from the Special menu if using Mac OS 9 or choose Shut Down from the Apple menu if using OS X Unplug all cables Place a soft towel or cloth on the desk or surface Turn the computer over onto the cloth Stand Installation 2 6 The stand attaches to the locations circled below 7 Remove the screw located between the computer s feet Stand Installation 3 Position the stand on top of the screw holes Note The stand slides back and forth To attach the first screw slide the stand toward the back of the computer Stand Installation 4 10 Tighten the first screw 11 Slide the stand forward to access the two rear screws Stand Installation 5 12 Tighten the screw on the left 13 Tighten the screw on the right
3. rtino CA 95014 2084 USA 1 408 996 1010 http Awww apple com Apple the Apple logo Mac Macintosh and the Mac logo are trademarks of Apple Computer Inc registered in the U S and other countries Power Mac is a trademark of Apple Computer Inc Stand Installation 13
Download Pdf Manuals
Related Search