Anton/Bauer UL-2 User's Manual
Contents
1. stop 50 while softening the edges of the beam pattern and increasing beam diameter approximately 50 UL DC Ultralight Dichroic Filter Converts output of bulbs to match 5600 K daylight The UL DC filter must be used when using the Ultralight for daylight fill or cool white fluorescent fill When properly fitted the slot in the tab will align with a screw in the center of the hood The tab insertion requires a slight force If the filter assembly is too loose and does not stay in place bend each side of the tab in opposite directions as shown to provide sufficient holding friction The friction on the filter pivot may be increased by tightening the pivot screw which extends the length of the filter assembly MOUNTING A FILTER Adapters may be attached to the top of the Head Module or to either side and folded back against the Head Module when not in use Two adapters may be simultaneously attached to the lighthead one on either side A UL DC can be used in combination with either a UL WA or a UL DF simultaneously When trying to accommodate two filters at the same time it may be necessary to obtain a new hinge for the filter which will allow two to be used simultaneously The part number for this hinge is 5140 1051 Please contact the Anton Bauer Customer Service Department for more details at 800 541 1667 203 929 1100 or support antonbauer com PERMANENTLY MOUNTING A FILTER First removethe screw and washer bet2. SIZE Light Head Module 214 W x 2 4 H x 2 DP Base Unit w Head Module 2 4 W x 4 H x 3 DP SERVICE If you have any question about this or any Anton Bauer product please contact our Customer Service Department at 1 800 541 1667 USA Only or 203 929 1100 WARRANTY REGISTRATION CARD MUST WITHIN 10 DAYS OF PURCHASE TO QUALIFY FOR THIS WARRANTY Proper registration will also enable us to send you important update information We must have the warranty registration card on file at our CUSTOMER SERVICE DEPARTMENT to establish warranty Proper registration will also enable us to provide you with update information on your lighting system All new Anton Bauer products have been thoroughly tested and inspected prior to shipment This product is warranted against defects in materials and workmanship for a period of one 1 year from date of purchase If this product fails to perform to its specifications during this period it will be repaired or replaced at Anton Bauer s option This warranty does not cover damage resulting from accident misuse or abuse neglect or improper service or maintenance Use of unauthorized service replacement parts or attachments will void this warranty Misuse includes any use of this product in other than its intended applications No responsibility is assumed for any special incidental or consequential damages No other Warranty written oral o
3. One or more of the following patents may apply 4 218 107 4 810 204 4 822 296 4 965 738 5 057 383 Other patents U S and International pending Anton Bauer Inc Anton Bauer Europe B V World Headquarters Eurode Business Center Eurode Park 1 14 Progress Drive Shelton CT U S A 6461KB Kerkrade The Netherlands Tel 203 929 1100 or 800 541 1667 Tel 31 45 563 9220 Fax 203 929 9935 Fax 31 45 563 9222 support antonbauer com eurosupport antonbauer com www antonbauer com 7595 0085 Rev G
4. dge UL2 WEDGE SHOE MOUNT APPLICATION 1 Slide the base of the UL2 wedge into the camera Shoe Mount Insert at the front of camera towards the lens 2 Fasten the UL2 wedge to the camera shoe using the supplied 5 16 24 slotted screw Do Not Overtighten as this will cause damage to the camera mount 3 Attach the Ultralight 2 to the UL2 wedge by threading UL2 s 4 20 stud directly into the mating hole on the ramp of the UL2 wedge XL WEDGE Same as the UL2 Wedge except that it is 3 inches longer Should be used to clear Shotgun Mics and Wide Angle Lens Will also allow the UL2 to clear the shoulder strap without interference FILTERS Adapter accessories are detachable pivoting filter lenses allowing the user to flip the adapter in and out ofthe beam pattern Adapters Diffuser Wide Angle Dichroic are mounted in a holder pivoted from a slotted tab The adapter assembly is attached to the Head Module by sliding the slotted tab into the space between the light head safety glass holder and the hood UL WA Ultralight Wide Angle Adapter Converts both spot bulbs and medium flood bulbs into full flood 36 patterns A very efficient optical device that provides an exceptionally smooth and even pattern and will cover the widest angle zoom lenses The UL WA filter can also be used with flood bulbs to smooth out uneven bulb patterns UL DF Ultralight 1 Diffuser For use with spot bulbs Lowers light output by approximately one
5. e Bulb The ESX EYR and EYF bulbs provide three beam output options 1 Spot 15 plain bulb 2 Medium Spot approximates 21 with Diffuser UL DF 3 Flood 36 with Wide Angle adapter UL WA which covers most zoom lenses in the extreme wide position Dual Purpose Low Voltage Bulb The EXZ bulb provides two beam output and is a good all around bulb 1 Medium Food 24 plain bulb 2 Full Flood 36 with Wide Angle Adapter UL WA Single Purpose Low Voltage Flood Only bulbs The BAB EYP and EYC bulbs provide full flood 36 plain bulb Purpose Type Bulb Code Watts Spot Med Flood Amps RunTime w 4 AH Battery Triple Purpose 200 85 Spot Med Spot 400 170 Flood 700 300 Dual Purpose EXZ 175 4 1 2 45 min Med Flood Flood Single Purpose 1 1 3 120 min Flood Only EYP 3 3 4 60 125 6 1 4 35 NOTE data measured at 14 volts with a Diffuser UL DF with a Wide Angle Adapter UL WA SPECIAL NOTE Extensive field testing indicates that the ESX bulb despite its minimal 25 watts when used with the UL WA Wide Angle Adapter or the plain BAB bulb provides the most pleasing lighting condition for most indoor interviews in the typical 3 ft to 6 ft range SPECIFICATION Type MR 16 12 14 Volts 25 85 Watts Higher wattage bulbs are not recommended due to excessive heat generated by these ulbs WEIGHT Base unit with bulb 12 oz
6. field Bulbs can then be quickly switched for different lighting conditions or changes in power source Carrying spare bulbs in fragile cardboard packages defeats one of the main features of the Ultralight 2 IMPORTANT HEAD MODULE MUST BE REMOVED FROM THE BASE PRIOR TO CHANGING A BULB NEVER ATTEMPT TO REMOVE A BULB WHILE THE HEAD MODULE IS ATTACHED TO THE BASE 14 20 STUD MOUNT APPLICATION The Ultralight 2 is shipped standard with 14 20 Stud Mount for attaching to the camera handle To remove install a 4 20 Stud Mount follow these instructions 1 With the supplied 5 64 hex wrench loosen the set screw located in the thumbwheel 2 Install a 4 20 Stud Mount into the bottom of the thumbwheel Insert stud as far into light as possible 3 Tighten the set screw in the thumbwheel 5 64 Hex Wrench pr I Thumbwheel td Mount Insert Stud Mount as far into light as possible NOTE In order for the 4 20 Stud Mount to completely tighten down on the camera the Stud Mount must be fully inserted into the thumbwheel Otherwise the UL2 may swing back and forth SHOE MOUNT APPLICATION Certain lighting applications need a Shoe Mount to secure the light to the camera Most JVC and PANASONIC cameras will use this Shoe Mount For installation of Shoe Mount 1 Remove existing Stud Mount from the Ultralight 2 base See previous page 2 Insert Shoe Sleeve into thumbwheel pushing it as far into the th
7. ho A ULTRALIGHT 2 UL 2 OWNER S MANUAL TO REMOVE HEAD MODULE 1 Push Head Module forward 2 Lift Head Module and remove it from the Base TO RE ATTACH HEAD MODULE Push Head Module onto base as shown until the Head Module engages over screw Screw TO REMOVE REPLACE BULB NOTE Only MR 16 type bulbs should be used with the UL2 A Pull out on the Thumb Tabs of the Head Module 2 Swing Hood open 3 4 Remove and replace bulb as necessary Close Head Module insuring that it clicks closed Hood 92978 HEAD MODULE I BASE ASSEMBLY ONIOFF SWITCH Se THUMBWHEEL INTRODUCTION The Ultralight 2 UL2 is an extremely compact super lightweight version of the original Ultralight system designed specifically for on camera lighting applications The Ultralight 2 incorporates many unique features including Included with a AB 60 wide angle bulb diffused glass for smoother beam patterns Quick change head module feature permits instant field light source changes without direct bulb handling adjusting to full or spot lighting situations The head module tilts for indirect lighting applications and can be easily fitted with a swing away wide angle adapter UL WA diffuser UL DF or dichroic filter UL DC Compact size with the quick change head module removed the Ultralight 2 is a mere 2 x 1 x 1 and can be left on the camera a
8. r implied is assumed or authorized by Anton Bauer The liability of Anton Bauer hereunder is expressly limited to a claim for a repair or replacement for the goods sold or as otherwise stated herein This Warranty is to be construed and enforced in accordance with the law of the State of Connecticut including the provisions of the Uniform Commercial Code as adopted and from time to time amended in the State of Connecticut and not the Convention for the International Sale of Goods This choice of Connecticut law is exclusive of any Connecticut law that would require reliance on any law foreign to Connecticut Should any action of law or in equity be brought by any person under this Warranty such action shall be brought only in the United States District Court for the District of Connecticut or in any Superior Court in Fairfield County Connecticut U S A If you have any questions regarding applications or specifications or to obtain warranty service on this or any Anton Bauer product contact the Anton Bauer Customer Service Department below for contact information The worldwide standard The following are registered trademarks of Anton Bauer Inc ACS Anton Bauer Anton Bauer Logo Automatique ComPac Gold Mount HyTRON Impac InterActive InterActive 2000 Logo LifeSaver Logic Series Logic Series Logo PowerStrap SSP Satellight Snap On The worldwide standard Triconn TrimPac Ultralight Ultrakit
9. t all times without interfering with operation fitting easily into a camera case with little or no modification to the case patented universal mounting system for 4 20 stud or shoe type mounting is standard eliminating the need for special studs or adapters Integral PowerTap connector cable comes in lengths to dress neatly on any camera camcorder no secondary cables are required to mate to any Gold Mount camera bracket OPERATING When powering the Ultralight 2 through the on board camera battery pack integral PowerTap connector cable the UL2 should be turned off and the battery pack charged as soon as the camera battery warning light comes on in the viewfinder If the light is left on after this point the UL2 will continue to drain the battery which can cause permanent damage to the cell pack Greater caution is required if an external unmetered battery is used In this case suggested bulb run times should be followed closely and the battery should be changed before the light begins to grow noticeably dimmer During battery operation the light should never be left on when unattended To achieve the full versatility and benefits of the Ultralight 2 system several spare Head Modules should be employed with each light to carry spare bulbs or a variety of bulb voltages wattages and beam angles The Head Module is designed to be a compact and rugged storage container allowing extra bulbs to be easily and safely carried in the
10. umbwheel as possible 3 Using 5 64 Hex Wrench tighten down the Shoe Sleeve 4 Screw Shoe Mount into Shoe Sleeve about half way 5 Slide the Shoe Mount onto the camera handle and then tighten down via the thumbwheel 5 64 Hex Wrench E Set Screw Thumbwheel FER L N Shoe Sleeve Be sure the Shoe Sleeve is completely inside the light Mount otherwise the light may swing back amp forth NOTE In order for the Shoe Mount to completely tighten down on the camera the Shoe Sleeve must be inserted as far into the thumbwheel as possible Otherwise the light may swing back and forth ACCESSORIES UL2 WEDGE The UL2 Wedge is developed specifically for use with the Anton Bauer Ultralight 2 on camera light The UL2 Wedge provides the Ultralight 2 with an additional 20 of down angle lighting for shooting extreme close up camera shots less than 3 feet A Universal mounting design allows quick adaptation to cameras using either 14 20 Stud Mount Shoe typing lighting mounts 1 4 20 Screw 5 16 24 Screw Stud Mount Application Shoe Mount Application UL2 WEDGE STUD MOUNT APPLICATION 1 Position the base of the UL2 wedge directly over the camera s 4 20 Stud Mount 2 Fasten UL2 wedge to the camera mount using the supplied 4 20 Phillips screw Do Not Overtighten 3 Attach the Ultralight 2 to the UL2 wedge by threading UL2 s 4 20 stud directly into the mating hole on the ramp of the UL2 we
11. ween the hood and glass frame from any one ofthe Head Module s three sides Install the filter as described before Reinsert the screw and tighten fully The washer will no longer be necessary The UL Soft mounts easily to any Ultralight Head Module to soften and diffuse light output The UL Soft Box is collapsible allowing easy storage or can fold and swing away while remaining on the Ultralight until needed ULTRADAYLIGHT The UltraDaylight Head Module fits any Ultralight base to instantly deliver 5600 k at less than half the power required of tungsten halogen without the need for dichroic adapters Uniquely designed to share power from camera battery using the PowerTap on every camera Gold Mount Instantly change from daylight to tungsten and back by simply swapping head modules no twisting turning or handling bulbs And since the rugged Ultralight Head Module house and protect the bulbs they can be stored in the head module until the next use The UltraDaylight head module is a unit 25 watt bulb and ballast all in one Pi BULB SELECTION AND OPERATION Bulbs used by the Ultralight 2 are Type 16 tungsten halogen bulbs Spot or flood bulbs of any light distribution angle may be used The Ultralight 2 offers the greatest versatility with the following low voltage bulbs They can be powered from any 12 14 4 volt camera battery with the Ultralight 2 integral PowerTap connector cable Triple Purpose Low Voltag
Download Pdf Manuals
Related Search