American Standard 4665.003.XXX User's Manual
Contents
1. American Standard will provide free of charge at its sole option replacement part s or product or if no longer available a comparable product to replace those which have proven defective in materials or workmanship Proof of purchase original sales receipt from the original consumer or business purchaser must be made available to American Standard for all warranty claims This warranty is non transferable It does not apply in the event of product damage due to the use of other than genuine American Standard replacement parts installation error abuse misuse or improper care and maintenance whether performed by a plumber contractor service provider or member of the purchasers household The warranty excludes damage due to aggressive air or water conditions or harsh or abrasive cleaners and or materials This warranty does not cover labor charges incurred and or damage sustained in installation repair or replacement nor incidental or consequential damages This warranty is applicable only to American Standard faucets installed in the United States Canada or Mexico THIS WARRANTY IS EXCLUSIVELY IN LIEU OF ALL OTHER WARRANTIES INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE This warranty gives the original consumer or business purchaser of an American Standard faucet specific legal rights which may vary from state to state or from province to province In some states or provinces the exclusion2. thread ring FILTER Caution The filter cap will not snap into place unless the filter cartridge is installed properly y FILTER HOUSING RILTER CAP NOTCH fiN FILTER CLOCKWISE Cc gt Sa RONT NOTCH IN FILTER HOUSING THREAD RING 8 TESTING INSTALLED FAUCET AND FILTER OPERATION X Move handle into OFF position and remove Aerator 22 Turn on water supplies and check connections for leaks Operate handle up and down left and right to flush water lines thoroughly Put the Faucet Handle in filter water position handle in the off far right position There will be a small resistance as the handle is moved into the filter position Flush the system X Continue to allow filtered water to flow Reset the SMARTELECTRONICBiid of Filter Life Indicator 23 Using the edge of a coin ot your thumbnail depress the battery case and reset the indicator see the illustration pg 14 for details The display will read 88 days of life and will calibrate itself showing 90 Days of Filter Life remaining with the next activation Replace the aerator The ClearTap Water Filtering System installation is now complete Please read carefully the operation instructions to ensure optimal performance HANDLE HANDLE OPERATION ClearTap Water Filtering System Operating Faucet Instructions Water Delivery The ClearTap M Water Filtering System provides four opt
3. 4 Hole 24220 0070A Supply Nuts Replace the YYY withappropriate finish code a M961765 0070A Mounting Ring Kit lt S M907765 Y YYUA i Filter Housing Escutcheon 15 iClearTap Water Filtering System Limited Lifetime Warranty Definitions Faucet D That part of the ClearTap Water Filtering System that includes the handle spout valve cartridge cartridge cover waterways filter housing filter cap escutcheons spray head hoses and mounting hardware End of Life Indicator D That part of the ClearTap M Water Filtering System that includes the electronic display housing electronic components battery and battery holder Filter That part of the ClearTap Filtering Faucet System that is to be replaced once 250 gallons of water has run through the system Warranty American Standard warrants to the original consumer purchaser that for as long as the original consumer purchaser occupies the location of original product installation the Warranty Period that the Faucet see definition for Faucet above will be leak free during normal use and all parts and finishes of the Faucet will be free from defects in material and workmanship during the applicable warranty period Original commercial industrial or business installations shall have a five 5 year warranty on the faucet All parts and finishes of the End of Life Indicator carry a one 1 year warranty The Filter carries a thirty 30 day warranty
4. or imitation of incidental or consequential damages ts not allowed so those exclusions may not apply to you In the USA OLI In Canada Mn Mexico American Standard American Standard Ideal Standard S A de C V Worldwide Fittings Group L Customer Satisfaction Team Customer Satisfaction Team Customer Satisfaction Team 2480 Stanfield Rd L Planta Llaves Monterrey 1 Centennial Ave Mississauga Ontario Carretera Mex Loredo KM 1011 Piscataway NJ 08855 LAY152 D Canada Cienega de Flores N L Mexico 1 800 223 0068 1 800 387 0369 1 800 839 1200 In Toronto Area only 1 905 306 1093 16
5. the recess in the faucet body 11 Attach and COUPLING NUT tighten Spray Hose 6 to the faucet Make certain the large O ring 10 is properly seated 3 INSTALL ClearTap FAUCET TO SINK Insert Supply Tubes and faucet shank through hole in sink and center hole of Escutcheon 12 if used Use Single Hole Faucet Mounting Ring 13 for less escutcheon installations optional installation Assemble Rubber Washer 9 Brass Washer 8 and threaded faucet Mounting Ring 7 onto the faucet shank from the underside of the sink Screw faucet mounting ring hand tight against sink and check that the spout rotation from left to right is centered Y Using a 5 16 or 8mm socket wrench nut driver or flat blade screw driver wotk around the faucet Mounting Ring tightening the three long Screws 1 slightly each time until tight Insure that the Screws make even contact pressure AF against the brass washer on the undersutface of the sink Securely tighten the fourth Locking Screw 2 to hold threaded Mounting Ring in position on the faucet shank RECESS IN OPTIONAL OPTIONAL ERES O RING SINGLE HOLE FAUCET FILTER MOUNTING RING ESCUTCHEON PIPE CAP OPTIONAL S8PRAY HOSE CONNECTION 4 FACTORY ASSEMBLED BASE PLATE RUBBER WASHER BRASS WASHER er CEU FAUCET MOUNTING RING L amp B 5 16 HEX T ON MOUNTING L7
6. 1 2 SCREW IS SCREWS 5 LOCKING SCREW 4 CONNECT INLET WATER SUPPLIES Carefully bend the faucet copper inlet supplies to meet the water supply lines Use the palms of the hands to avoid kinking X Connect hot water to the shorter supply tube red tape and cold supply to the longer tube Hold the threaded fitting with a wrench to prevent twisting and collapse of the tube while tightening with the othet wrench COPPER OR FLEXIBLE SUPPLIES BULL NOSE RAISER SUPPLY A SUPPLY f NUTS 21 SUPPLY SUPPLIED VALVES CONNECTION TO FITTING 5 ClearTap Filter HOUSING INSTALLATION Remove the Collet Assembly 14 from the Filter Housing 15 by grasping the Collet Assembly and firmly pull it down the housing Insert the Filter Housing into the faucet Escutcheon filter hole Note For faucet installations not utilizing the Escutcheon 12 use separate Filter Housing Escutcheon 16 Insert filter hoses through Collet Assembly Note make sure the Collet Assembly is correctly oriented check for the up arrows on the Collet Assembly Push the Collet assembly onto Filter Housing Make sure the Collet Assembly is moved above the Bump on the Filter Housing see picture FILTER HOUSING BUMP COLLET 55 ASSEMBLY T RETRACTED STOP AGAINST at 2 STOP E COLLET ASSEMBLY PULL DOWN TO REMOVE ClearTap Filter HOUSING INSTALLATION CONTINUED Ori
7. Atntricam Standard ClearTap Water Filtering Owner s Manual Models 4665 000 XXX and 4665 003 XXX Colors 002 020 021 285 and 295 4665 4665 3 4665X and 4665 3X Colors B W V S Foreign and Domestic Patents pending ClearTap Water Filtering System ClearTap Filters SMARTELECTRONICS The Employees of American Standard would like to thank you for purchasing our product The revolutionary ClearTap Water Filtering System will provide you with great tasting clean water To get the most enjoyment from your American Standard ClearTap Water Filtering System please read all installation and operating instructions carefully With simple cate and maintenance the ClearTap Water Filtering System will provide many years of teliable performance If you should have any questions or comments please call us toll free in the U S at 1 800 223 0068 TABLE OF CONTENTS Water Filtration SO AE de 2 Installation TNStrulCtlONS ccccccceccccceccecccececcccececcceceeccees A Operating TNStrutlONs ccccccccccccccecccccecceccccceccccececcceaceccs 12 Filter Replacement eas A Care and Maintenance eeeeeee HH 14 Repait Faris tigers Lo PG ASAIN cts 16 ClearTap Water Filtering System ClearTap Filters SMARTELECTRONICS 1 WATER FILTRATION SUMMARY Your American Standard ClearTap Water Filtering System is a fast and effective appliance designed to reduce a
8. ent the Filter Housing front is identified and secure by holding the lower portion of the Collet assembly while turning the upper half of the Collet assembly with the other hand Securely hand tighten the Filter Housing Tools are not required TURN UPPER HALF TO SECURE HOLD LOWER HALF OPTIONAL INSTALLATION OF FILTER HOUSING IN KITCHEN CABINET dpi BELOW THE COUNTER NOTE FILTER CAP MUST BE INSTALLED FILTER 7 IN ALL MOUNTING HOUSING APPLICATIONS SECURE MOUNTING BRACKET 17 NOT SUPPLIED WITH ALL MODELS COLLET ASSEMBLY NOT REQUIRED FOR THIS OPTIONAL INSTALLATION METHOD 6 ATTACH FILTER LINES Attach the two Quick Connect Unions 18 to the filter water inlet and outlet copper tubes of the faucet Note The copper tubes are different diameters The BLUE hose connects to the LARGER diameter copper tube and the CLEAR hose connects to the SMALLER diameter copper tube CLEAR TUBE CONNECTS TO SMALLER DIA TUBE CONNECTS TO LARGER DIA TUBE QUICK CONNECT UNIONS ea BLUE OS HOSE F FILTER INSTALLATION X Insert the Clear Tap Filter 19 into the top of the Filter Housing 15 Turn the Filter clockwise to engage the threads and continue to turn until the notch on the filter faces forward and is aligned with notch in the Filter Housing thread ring NOTCH Push the Filter Cap 20 onto the Filter Housing 15 until the Filter Cap snaps onto the Filter Housing
9. ions for water delivery Unfiltered cold mixed or hot water and Filtered cold water Unfiltered water is delivered from the normal faucet Aerator 22 Filtered water is delivered from the Filter Water Nozzle 24 which is positioned in front of Aerator 22 Note Water from the spray hose is not filtered X HOT UNFILTERED MODE Move the handle up and to the left X MIXED UNFILTERED WATER Move the handle up into the center position X COLD UNFILTERED WATER Move the handle up and to the right X COLD FILTERED WATER With the Faucet handle in the closed position move the faucet handle to the right Push the Faucet Handle past the resistance and filtered water will begin to flow from the Filter Water Nozzle 12 SMARTELECTRONICSFilter End of Life Indicator Y The ClearTap Water Filter System comes with an Electronic End of Filter Life Indicator which is located at the end of the spout It indicates the amount of time in days before the filter has to be changed The display is only illuminated when filtered water is being drawn from the faucet In all other times the display is blank Y When the display reads CF this indicates Change Filter it is time to replace the filter See filter replacement section for the How to replace the old filter and install the new filter details Note Always reset the electronic end of filter life indicator when changing filters ClearTap Filter Cartridge Replaceme
10. ltered water to flow Using the edge of a coin or your thumbnail depress the battery case and reset the indicator see the illustration for details pg 14 The display will read 88 days of life and will calibrate itself showing 90 Days of Filter Life remaining with the next activation X Allow cold water to run through the new filter to flush the system for 5 minute 13 Care and Maintenance Battery Replacement A 3V lithium watch battery CR1220 powers the electronic indicator Battery replacement is required when the SMARTELECTRONIGfsplays the letters CB To Replace the Battery Turn the faucet off Gently pull the Battery Holder 25 from the End of Life Indicator 23 Housing located underneath the front of the faucet spout Insert a new Battery 26 into the rubber Battery Holder 25 Note the polarity of the battery and the orientation of the Battery Holder see the detail insert Push battery and Holder back into faucet securely Turn on the filter water flow to check battery operation The display will read 88 days of life and will calibrate itself showing 90 Days of Filter Life remaining with the next activation Care All that is needed to clean the ClearTap Water Filtering System is a soft damp cloth American Standard does not recommend the use of scouring pads abrasive cleaners or chemicals The surface of the faucet and its components could be permanently damaged A non abrasive auto polish ca
11. n be used to help restore and protect the finish _INDICATOR HOUSING BATTERY di C CR1220 pad BATTERY Aa HOLDER INDICATOR HOUSING BATTERY HOLDER PUSH EDGE OF COIN AGAINST THE BATTERY HOLDER TO RESET THE DISPLAY 14 REPAIR PARTS BREAKDOWN M961760 YYYOA Handle Kit MODEL NUMBERS M961766 Y Y YUA 4665 000 XXX 4665 003 XXX i e M961761 0070A Escutcheon Kit 4665 4665W 4665B Button and Screw Kit 4665V 46655 4665 3 Flen ir j M907760 Y Y YOU A Cap and Retainer Filter Cap Filter Clutch A918585 0070A M961767 YYYUA Cartridge Screws iin ibo in Escutcheon Kit W Spray Hole eue M953895 0070A ClearTap Filter F 20 061810 Y YY UA A954410 0070A Spray Holder 3 Hole C d d Seals M961769 0070A ie ea gt Filter Housing M961762 0070A Cartridge Mtg Disk and Screws E M961790 0070A h Hose Kit W Quick Connect Unions A923583 0070A M961768 VVYOA Seal Ring Single Hole Mounting Escutcheon A904664 0070A Manifold End of Life Indicator A954589 0070A 42850 0070A 19 a Diverter gy 1V 4023588 0070A Nozzle 050366 0070A L M061764 0070A Spout Seal Kit Battery with Holder A954477 0070 A 0660070 Y YYUAA Collet Assembly Aerator d p M961763 Y YYOA A912647 0070A Gasket M961770 00 70A Spout 922820 Y Y YUA Mounting Bracket Spray and Hose TT 060341 0070A Pipe Cap 030760Y Y YUA Spray Holder
12. nd or remove contaminats which may be found in drinking water This filter faucet system has been certified by NSF an Independent Standard Setting Organization to comply with the nationally recognized standards for Water Filtration NSF 42 and 53 and the Safe Drinking Water Act Faucet Drinking Water Additives Health Effects NSF 61 The ClearTap Water Filtering System has been designed to the ANSI ASME A112 18 1 and CSA B125 Plumbing Standards Installation must comply with State and Local plumbing codes and regulations ClearTap Water Filtering System includes the Patented American Standard Clear Tap M Filter Cartridge System Tested and Certified by NSF International against ANSI NSF Standard 42 for the reduction of Chlorine Class I Taste and Odor Particulate Class I and against ANSI NSF Standard 53 for the reduction of Turbidity Lead and Cysts Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system System Certified for Cyst Reduction and may be used on disinfected waters that may contain filterable cysts Important Notice Read the Manufacture s Performance Data Sheet ClearTap Filter Cartridges are designed for replacement after dispensing 250 gallons of filtered water or approximately 3 months of normal household usage Water conditions may affect filter life The SmartElectronic indicator will identify when filter replaceme
13. nt The ClearTap Filters F20 19 can be purchased at your local retail or wholesale Ametican Standard distributor or www americanstandard us com The ClearTap Filter Cartridge should be left in protective film until ready for installation The ClearTap Filter Cartridge is a high performance carbon based filter developed specially by American Standard for the ClearTap Water Filtering System The electronic module keeps track of the amount of filter life remaining and will signal you when the filter change is necessary by displaying the letters CF Note Use only ClearTap Filter Cartridges with the ClearTap M Water Filtering Systems How To Replace the OLD Filter with a NEW Filter Y Remove the Filter Cap 20 by lifting straight up Turn the Filter 19 counter clockwise until the filter pops out of the Filter Housing 15 Discard the old filter X Remove the protective wrapping from the replacement filter cartridge Y Insert the filter into the top of the filter housing Turn the filter clockwise to engage the threads and continue to turn until the notch on the filtet faces forward and is aligned with notch in the Filter Housing thread ring Y Push the Filter Cap onto the Filter Housing until the Filter Cap snaps onto the Filter Housing thread ring Caution The filter cap will not snap into place unless the filter cartridge is installed properly Y Turn the faucet handle to the filtered water position and allow fi
14. nt is necessary The SmartElectronic monitors your family s filter water usage and communicates the filter replacement in Days of Life remaining before the filter needs to be changed This patented feature is unique in the market place Use only ClearTap Filter Cartridges with the ClearTap Water Filtering System The ClearTap M Water Filtering System flow rate 1s 0 60 0 75 gpm for supply pressures from 20 psi to 125 psi Maximum water temperature in filtered mode 100 F Minimum operating temperature 35 F Filter Water Temperature Please follow the installation indien to ensure the proper supply water line hookup Once connected properly the ClearTap Water Filtering System has a built in patented design feature that does not allow hot water to citculate through the filter Hot water exposure can decrease filtered water quality Clear Tap Filter Cartridge Flushing Allow water to flow through a new filter to flush the system Unlike some other point of use carbon filter systems the ClearTap Filter cartridge will not shed black particles If the ClearTap Water Filtering System has not been used for an extended period of time allow fresh water to purge the system for 1 minute before utilizing the filtered water Questions If you have any questions please call our toll free help line In the USA 1 800 223 0068 Monday through Friday 8 00 a m to 7 00 p m EST In Canada 1 800 387 0369 Tor
15. onto area only 1 905 306 1093 n Mexico 1 800 839 1200 Clear Tap Water Filtering System Installation Recommended tools Adjustable wrenches 2 5 16 or 8 mm hex socket ratchet or nut driver Flat blade screw driver To install your new faucet in a simple and easy manner read the following instructions before beginning installation CAUTION Turn off hot and cold water supplies before beginning THREADED HOLES Remove old faucet Thoroughly clean e dc E E T n ids and dry the mounting surface NOT LOCK RING Install the three 1 long 1 and one 1 2 long 2 Slotted Hex Head Screws into the Faucet Mounting Ring 7 MOUNTING RING 7 I musa e T i THREE 1 LONG eS i a SCREWS 1 SPRAY HOLDER INSTALLATION f Side Spray is not desired use Pipe Cap 3 to seal the faucet spray outlet Place the Side Spray Holder 4 into the appropriate mounting hole Assemble the Spray Holder Nut 5 onto the shank of the spray holder from below and tighten Caution do not use putty Note Perform the following steps before installing the faucet Push Spray Hose 6 into Spray Holder Push the end of Spray Hose through the Faucet Mounting Ring 7 Brass Washer 8 and Rubber Washer 9 Push the end of the Spray Hose up through the desired sink hole and Escutcheon if used see detail in LS NS LI step 3 for proper orientation l H tr PIPE CAP OPTIONAL SPRAY HOSE in
Download Pdf Manuals
Related Search