American Standard Heritage 7190.132 User's Manual
Contents
1. Installation HERITAGE Instructions TS i Amanlis 7190 132 HERITAGE SERIES SINGLE HOLE BAR PANTRY FAUCET WITH SWING SPOUT with EverClean Finish Congratulations on purchasing your American Standard faucet with EverClean finish found only on American Certified to comply with ANSI A112 18 1M Standard faucets U S Patent No 5 819 789 EverClean Finish e One wipe effortlessly removes spots e Eliminates the need for cleaners and scrubbing e Permanent surface protectant remains beautiful M51320 Rev 1 1 for the life of the faucet e EverClean available on Polished Chrome Satin Nickel Stainless Steel Polished Brass or any combination of these finishes To ensure that your installation proceeds smoothly please read these instructions carefully before you begin 7190 132 012088 YYYOA SWING SPOUT KIT 0661 evra 028611 0070A AERATOR HANDLE SCREW 012087 0070A SPOUT SEAL KIT s l 051202 0070A g INDEX BUTTON H a 0 0070A A911758 0070A CARTRIDGE RUBBER RING M961714 0070A Replace the YYY with MOUNTING KIT appropriate finish code CHROME POL BRASS SATIN NICKEL HOT LINE FOR HELP T SATIN BRASS For toll free information and answers to your questions call 4 CHROME POL BRASS 999 1 800 442 1902 Weekdays 8 00 a m to 8 00 p m EST IN CANADA 1 800 387 0369 TORONTO 1 306 1093 Weekdays 8 00 a m to 7 00 p m E IN MEXICO 01 800 839 12 00 Product names listed here2. in are trademarks of American Standard Inc American Standard Inc 199 1 SWING SPOUT ASSEMBLY T ff hot and cold wat CAUTION supplies before beginning r m Apply the grease provided liberally to the SPOUT O RING 1 and SNAP RING 2 areas E Assemble the SPOUT 3 and tighten the SPOUT NUT 4 until snug on VALVE BODY 2 FITTING INSTALLATION Remove LOCKNUT 4 BRASS WASHER 2 and GASKET 3 from fitting Place RUBBER RING 4 in recess of fitting Insert inlet hoses and THREADED SHANK through hole of sink making certain RUBBER RING 4 is properly seated in the recess of the fitting base Assemble GASKET 3 BRASS WASHER 2 and LOCKNUT 1 onto the THREADED SHANK from underside of sink deck E Tighten the LOCKNUT 1 securely E Connect the hot water supply to the left inlet hose and the cold water supply to the right inlet hose using appropriate connectors FLEXIBLE INLET HOSES 3 TEST INSTALLED FAUCET Operate both handles to flush water lines thoroughly Checkspout mounting and hose connections for leaks E Remove AERATOR m With handle in OFF position turn on water supplies Turn handles into OFF position and replace AERATOR and check all connections for leaks AERATOR may accumulate dirt causing distorted and reduced water flow Remove AERATOR and rinse clean If spout drips operate handles several times from OFF to ON position Do not force handles turn only 90 E To change direction
3. of handle rotation proceed as follows Plastic SCREEN 3 in CARTRIDGE 4 may accumulate a Turn valve to OFF position aN dirt causing reduced water flow To clean first turn Remove INSERT and HANDLE SCREW S off hot and cold water supplies then Slip HANDLE with ADAPTER off Remove INSERT and HANDLE SCREW Remove SPRING CLIP 1 Slip HANDLE with ADAPTER off Lift STOP WASHER 2 turn 90 and replace Unscrew CARTRIDGE 4 with wrench Replace SPRING CLIP 1 ete E SCREEN 3 at Replace ADAPTER HANDLE SCREW and INSERT Replace CARTRIDGE 4 until flange is tight against valve body Turn valves OFF Replace ADAPTER HANDLE SCREW and INSERT EverClean Finish Care Instructions American Standard s EverClean finish will wipe clean with a soft dry cloth A soft cloth with clean water may also be used if desired No additional cleaning products are required DO NOT USE Soaps acid polish abrasives harsh cleaners or a cloth with a coarse surface M51320 Rev 1 1
Download Pdf Manuals
Related Search