American DJ LTS-50T User's Manual
Contents
1. American Die User Instructions LT S 5 O pa Portable Trussing System LTS 50T Parts List e 2x T bars e 6 x Slide mount T collars e 1 x Center l Beam Support bar e 2 x Beam connectors e 4 x Knobs for beam connectors e 2 X 5 Truss l Beam Sections e 2 X 9 Tri pod stands Instructions for assembling your LTS 50T 1 After removing the contents from the box locate the l beam connectors and the end of one of one of the 5 l beams with the perpendicular or vertical support rod Slide the l beam connector into the l beam tube Slide the other connector into the other tube See Fig 1 2 Insert the connector knob through the l beam and the connector and fasten with wing nut Do the same for other connector knob See Fig 2 3 Now take two of the slide mount T collar and attach to either end of the center support bar See Fig 3 4 Slide the center support bar assembly onto the l beam with attached connectors See Fig 4 5 Take the other 5 l beam the side with the vertical support rod and slide it over the beam con nector inside the center support bar assembly s T collars See Fig 5 6 With the both l beams in place insert the remaining two knobs into the other 5 l beam and fasten with wing nut See Fig 6 7 On the T collars above and below the center support bar tighten the small knobs so the full truss is secure See Fig 7 8 Set up the two Tri pod stands Adjust the telescopic adjustment asse2. mblies by loosening the knobs to preferred height Slide two T collars each onto the Tri pod center posts Move the truss assembly into the T collars Then place another T collar on the very top of each Tri pod s center post See Fig 8 9 Tighten the small knobs on the T collars on the Tri pod center posts at each end of the truss Slide a T bar into each of the top T collars on the Tri pod posts See Fig 9 10 Fasten bolts and wing nuts into T bar Finish by tightening the small knobs on the T collar See Fig 10 11 Reposition if needed recheck all connectors and tighten all fastners before mounting any fixtures to your completed LTS 50T trussing system Specifications Model LTS 50T Weight 42 lbs System Capacity 200 Ibs Affordable Quality Lighting Products from mexican DJ Los Angeles CA 90058 5 FT I BEAM Z LTS 1 C PERPENDICULAR fig 1 SUPPORT ROD Z LTS I KNOB M a LIS 1 Z LTS 1 KNOB Z LTS SB fig 3 a L LIS T 5 FT I BEAM kk Z LTS2 SK L LIS T Z LTS T 5 FT I BEAM Z LTS2 SK Z LTS2 TEL ADJ Z 1 0 M6B Z 1 0 M6 fig 8 Z LTS2 SK Z LTS2 TEL ADJ Z 1 0 M6B Z 1 0 M6 TRI POD CENTER POST Z LTS LL ADAPTOR Z LTS2 LK TRI POD STAND Z LTS50 TB Z LTS2 SK
Download Pdf Manuals
Related Search