Amana ABB2221FE User's Manual
Contents
1. kPa LOCATION REQUIREMENTS Yo 1 3 cm 212 6 3 cm PRODUCT DIMENSIONS TA handle incl S overall Cc top of cabinet X Depth Cab Width Cab Height Overall Height Model A B Cc D ABB2221FE 33 32 5 8 68 5 8 69 7 8 83 8 cm 82 9 cm 174 3 cm 177 5 cm AFD2535FE 34 35 5 8 68 5 8 69 7 8 AFF2534FE 86 3 cm 90 5 cm 174 3 cm 177 5 cm To ensure proper ventilation for your refrigerator allow for a 1 2 1 3 cm space at the top and behind the refrigerator If your refrigerator has an ice maker allow extra space at the back for the water line connections When installing your refrigerator next to a fixed wall leave 2 1 2 6 3 cm minimum on the hinge side some models require more to allow for the door to swing open NOTE It is recommended that you do not install the refrigerator near an oven radiator or other heat source Do not install the refrigerator in a location where the temperature will fall below 55 F 13 C Because Whirlpool Corporation policy includes a continuous commitment to improve our products we reserve the right to change materials and specifications without notice Dimensions are for planning purposes only For complete details see Installation Instructions packed with product Specifications s2. Amana Bottom Mount Refrigerator PRODUCT MODEL NUMBERS ABB2221FE AFD2535FE AFF2534FE Electrical A 115 volt 60 Hz AC only 15 or 20 amp fused grounded electrical supply is required It is recommended that a separate circuit serving only your refrigerator be provided Use an outlet that cannot be turned off by a switch Do not use an extension cord NOTE Before performing any type of installation Cleaning or removing a light bulb turn the refrigerator to OFF Depending on your model turn the freezer control to the word OFF or press the Freezer down arrow touch pad until a dash appears in both the Freezer and Refrigerator displays as shown Disconnect the refrigerator from the electrical source When you are finished reconnect the refrigerator to the electrical source and reset the temperature controls to the desired setting Water A cold water supply with water pressure of between 35 and 120 psi 241 and 827 kPa is required to operate the water dispenser and ice maker If you have questions about your water pressure Call a licensed qualified plumber IMPORTANT The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120 psi 241 and 827 kPa If a reverse osmosis water filtration system is connected to your cold water supply the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi 276 to 414
3. ubject to change without notice Ref W10175445 08 27 08
Download Pdf Manuals
Related Search