AirLink AKVM-2 User's Manual
Contents
1. 71 N Ver 1A 101 Quick Installation Guide Model AKVM 2 Introduction The AKVM 2 switch is a 2 port PS 2 type KVM switch that comes with two sets of built in 1 5M cables to save you cabling troubles It enables users to access control boot and reboot two computers using only one keyboard video monitor and mouse Its one piece de sign offers more portability and convenience to users than conventional KVM switches Installation a io Before connecting any cable please make sure all of your computers and their peripherals have been powered off Otherwise the KVM switch may not be set up properly Step 1 Make sure all the computers that are to be connected to the KVM switch and their peripherals are powered off If not power them off before you proceed with the following steps Step 2 Connect the shared keyboard monitor and mouse to the main KVM unit See Fig 1 1 Fig 1 1 Step 3 Connect each set of the built in KVM cables to a computer s keyboard video and mouse ports You can use individual standard keyboard mouse and video cables to extend the cable distance but depending on the type of cables you use the maximum cable distance is limited to 5 7 meters 15 5 23 feet Step 4 Power up the connected computers one by one After the computers ar2. e powered up the keyboard and mouse will be recognized and you can begin operating the KVM switch Operations There are two methods to select a specific computer Using the push button or the hotkey sequence Push Button The push button lets you directly switch between the computers Simply press the button on the KVM unit to select the computer Hotkey Sequence The hotkey sequence consists of three specific keystrokes pressd on the keyboard Hotkey sequence ScrLk ScrLk Command key The two consecutive ScrLk key should be pressed within 2 seconds and the following command key s should also be pressed within 2 seconds Otherwise the hotkey sequence will not be validated For detailed Hotkey sequences and their correspond ing functions please refer to the Quick Reference Chart on back Technical Support Email support airlinkplus com Website www airlinkplus com Continue on Back i Command Next lower channel Autoscan Beep Sound On Off Autoscan lPress 1 or 2 for the channel Quick Reference Chart Hotkeys Front Panel Button ScrLk ScrLk up arrow ScrLk ScrLk B ScrLk ScrLk S Description Select the lower channel Toggle on off the beep sound while autoscanning Autoscan through every connected channel
Download Pdf Manuals
Related Search