Agri-Fab 45-01792 User's Manual
Contents
1. ends of hitch tubes Ref 3 together using two hex bolts Ref 7 and hex lock nuts Ref 10 Do not tighten yet ADJUST SIZE Roller Drum Not sold separately Scraper Bar Hitch Tube Hitch Bracket Bearing Plastic Flat Washer 1 Hex Bolt 5 16 18 x 3 Assemble hitch brackets Ref 4 to hitch tubes Ref 3 using two hex bolts Ref 8 and hex lock nuts Ref 10 Do not tighten yet Tighten bolts and nuts starting with scraper bar Ref 2 then ends of hitch tubes Ref 3 and finally hitch brackets Ref 4 Install hitch pin Ref 13 through hitch brackets Ref 4 and secure with hair cotter pin Ref 14 Adjust plug Ref 11 size by twisting handle Lock plug in roller drum by flipping handle down Hex Bolt 5 16 18 x 2 1 4 Hex Bolt 5 16 18 x 1 3 4 Hex Lock Nut 5 16 18 Plug Lawn Roller Cotter Pin 5 32 x 1 1 2 Hitch Pin Hair Cotter Pin 1 8 REPAIR PARTS Agri Fab Inc 303 West Raymond Sullivan IL 61951 217 728 8388 www agri fab com Speed P ar Tf the fastest way to purchase parts WWW Speedepart com2. Agri Fab OWNERS MANUAL MODEL NO 45 01792 SAFETY PRECAUTIONS 1 Never attach a garden hose to the fill drain hole when filling Dangerous pressure build up could occur inside roller 2 Do not fill roller to maximum weight without checking capability of vehicle to safely pull and stop 3 Never use roller up and down hills always work across hills and slopes 4 Use caution when turning slowing or stopping 5 Always drain roller to keep from freezing Printed in USA 2004 Agri Fab Inc H D LAWN ROLLER 24 Dia x 36 Wide SPECIFICATIONS Roller Drum 24 Dia x 36 Wide Welded Steel O A Width Approximately 40 Bearings 1 1 D Replaceable Tow Hitch Std Pin Type 1 2 Hole Weight w Water Up to 640 Lbs Filled with Water Note May be filled with sand Approx Sh Wt Approximately 105 Lbs Form No 49538 10 04 ASSEMBLY INSTRUCTIONS SEE ILLUSTRATION BELOW 1 Assemble bearings Ref 5 into hitch tubes Ref 3 so that bearing flange is against outside of hitch tube You may need to place a block of wood against bearing and carefully tap with a hammer Place hitch tubes Ref 3 onto both ends of roller shaft Assemble a flat washer Ref 6 onto each end of roller shaft and secure with two cotter pins Ref 12 Assemble scraper bar Ref 2 to hitch tubes Ref 3 using two hex bolts Ref 9 and hex lock nuts Ref 10 Do not tighten yet Assemble
Download Pdf Manuals
Related Search