Aero Mist Nozzle Fogging Kit 52469 User's Manual
Contents
1. LIMITED WARRANTY Aeromist Inc shall warrant the components of the 15 Nozzle Fogging Kit Model 52469 to be free of defects in workmanship for five years Maintenance items are not warrantable including nozzles and filters No warranty of merchantabil ity or other warranty expressed or implied is made Liability for and the exclusive remedy for defective materials or workmanship is limited to the replacement or repair of defective products This warranty ap plies only to the original purchaser of the system and is not transferable Any parts found to be defective will be replaced at no charge All parts must be returned to Aeromist Inc freight pre paid by customer and will be returned to customer by Aeromist Inc freight collect This warranty specifically excludes the following Failure of parts due to dam age by accident fire freezing chemicals improper installation or unusual characteristics of water supply such as mineral and calcium buildup This warranty covers parts only Any costs incurred due to replacement or repair is the responsibility of the buyer and not covered under warranty AEROMIST 23610 N 20th Dr Ste 6 Phoenix AZ 85085 602 454 8900 www aeromist com 15 NOZZLE FOGGING KIT MODEL 52469 PENDING INSTALLATION INSTRUCTIONS AEROMIST TOOLS REQUIRED LIST OF ALL ENCLOSED PARTS HIGH PRESSURE PUMP Tape Measure QTY PART NO DESCRIPTION For optimum per2. Ng Connect to High Pressure Pump Soil Line LI LI LL Li LI 0 lt A I lt I lt eel A l G
3. flush again aAa PRD pin peo ede for one minute Install nozzles in each additional riser one at a time and flush again until nozzles in all risers are installed 52473 1 Nozzle Fog Riser pre assembled MAINTENANCE 52411 012 Misting Nozzle Fine e Nozzles require cleaning or replacement periodically Clean nozzles by soaking in vinegar or calcium removal product overnight or 52513 Brass End Plug replace as needed e Winterize your misting system by draining water out of lines Be sure all water is drained from Fog lines This will prevent water from freez 52510 Brass Union ing and damaging the fog line This can be accomplished by forcing compressed air through the lines 52512 Brass Tee Warning Fogging system is intended for outdoor use only e Use normal tap water or soft water only e Do not exceed 1000 PSI FREQUENTLY ASKED QUESTIONS e Do not unscrew nozzles while under pressure Q How many nozzles can use with 1000 PSI Misting Pump e Do not touch nozzles when system is pressurized 60100K A 30 nozzles and still maintain 800 1000 PSI range Q How much fog will this create A Fog varies depending on temperature humidity and spacing Brass End Plug 52513 3 Nozzle Fog Riser 52468 Q Does this create cooling A Yes this creates cooling when the fog evaporates Q Can nylon be buried under concrete X 9 yR Y Yes recommend using sleeving Oy SO Gf SBS 1 yin ie Wis ie Qn ave Oy KN A P o SA E
4. formance of your new Aeromist 15 Nozzle Fog z Kit 52469 we recommend the use of an optional 1000 PSI high PVC Tubing Cutter 1 56401 Flexible Nylon Tubing 50 ft Roll pressure pump to create fog This system is expandable with up 5 8 Open End Wrench 5 52468 3 Nozzle Fog Riser pre assembled to 30 012 size nozzles using our 1000 PSI Misting Pump kM 60100K Larger pumps are also available Please see the en 9 16 Open End Wrench 15 52411 012 Misting Nozzle Fine closed accessories brochure or visit www aeromist com for other 1 52513 Brass End Plug available pumps upgrades and accessories INSTALLATION INSTRUCTIONS OPTIONAL ACCESSORIES 1 Connect Flexible Nylon Tubing 56401 to outlet of high pressure pump PART NO _DESCRIPTION 2 Bury tubing approximately 6 underground Cut Flexible Nylon Tubing 56401 with a PVC Tubing Cutter Insert tubing into brass tee 60100K 1000 PSI Misting Pump of the 3 Nozzle Fog Riser 52468 until it bottoms out in the fitting Complete seal with one wrench turn of fitting Continue by con necting tubing from one riser to next Space risers 2 10 feet apart as desired Closer spacing will result in denser fog After the last riser 56401 Flexible Nylon Tubing 50 ft Roll attach a short piece of tubing and terminate with the Brass End Plug 52513 52468 3 Nozzle Fog Riser pre assembled 3 Flush system for several minutes before inserting nozzles Install nozzles in 3 risers nearest the pump hand tighten only and
Download Pdf Manuals
Related Search