Addonics Technologies RTM25N335U3 User's Manual
Contents
1. RAID Tower Mini by pressing the power button on the front The power LED light should lit indicating the power is on V Sil4726 Manager Utility Installation Note You need to install the Sil4726 Manager on your system to configure RAID sets RAID configuration is programmed by connecting the hardware port multiplier e to one of Addonics SATA controllers that has SIL3124 or SIL3132 chip set After RAID configuration it is compatible with any SATA controller RAID or non RAID If you have configured individual drives you need to connect the RAID tower to a port multiplier compatible eSATA host controller if you plan to use eSATA connection After RAID configuration and you plan to connect to a USB2 0 or 3 0 port on your system connect the eSATA to USB3 0 adapter to eSATA cable and plug it into the USB port Software Installation for Sil4726 Manager A From the CD start up menu select SATA RAID Utilities gt Other SATARAID Utilities gt Windows 2000 XP 2003 Vista B Unzip the file Sil 4726 Manager V4 0 0 9 zip on your drive The folder name would be Sil4726 C To install Sil4726 Manager double click setup exe In Sil4726 Manager all the drives connected to the RAID Tower IV will show up VI Setting RAID on the HPM For a complete User s Guide of Sil4726 Manager refer to our website Support gt User Guides gt Sil4726 Manager User Manual V 26 TECHNICAL SUPPORT Phone 408 453 6212 Hours 8 30 am 6 00 pm2. ADDONICS TECHNOLOGIES Model RTM25N335U3 I Removing Cover of RAID Tower Mini Loosen the 3 screws at the back of the tower using a Philips screwdriver by turning counter clockwise Separate the metal casing of the storage tower from the housing by lifting up the casing as shown on the photo II Installing drive into the RAID Tower Mini Using 2 5 SATA hard disk drive slide the drive into the drive bay Close the front panel to secure the drive hard disk drive Using 3 5 SATA hard disk drives slide the drive into the embedded drive bay and secure the drive to the bay with screws provided SATA data cable Connect the internal SATA data cable to the data port of the hard drive then connect the 15 pin SATA power connector to the power port on the hard drive lll Connecting the power cable and RAID Tower Mini to the computer a Connect the power cord provided from the wall outlet to the back of the RAID Tower Mini b Make sure the power is off power LED light should be off c Connect the provided eSATA cable from the back of the RAID Tower to the eSATA controller card on the computer We recommend connecting the eSATA port for best performance if this port is available on your computer d If eSATA connection is not available connect the USB2 0 to eSATA adapter to the other end of the eSATA cable then connect the adapter to the USB port on your computer IV Power on off control Turn on the power to the
3. PST ADDONICS TECHNOLOGIES Model RTM25N335U3 Email http www addonics com support querv
Download Pdf Manuals
Related Search