Addonics Technologies AEDMDISU2 User's Manual
Contents
1. ATA USB DigiDrive is connected to Open mode force flash media to become Fixed disk type Media Detection Flash media is automatically refresh and detected when added or removed Icon appears only when flash media is inside Flash media detection requires manual refresh in Device Manager Non hot swap SATA port Icon appears only when flash media is inside Media Detection Icon always there with or without Flash media automatically Non hot swap SATA port flash media inside the DigiDrive detected when added or remove ll Sawna up the device in USB Mode Connect a 4 pin floppy power cable to the internal SATA USB DigiDrive 3 Attach USB 5 pin header from internal SATA USB DigiDrive to USB header on PC C The drive icon appears only when flash media is inside the internal SATA USB DigiDrive The drive icon will disappear and reappear during media change Note for AEIDDSAUWP If an unformatted flash media is use no drive icon will show up in My Computer Media Priority When more than one media is inside the internal SATA USB DigiDrive during bootup the media that gets detected first is according to the priority shown below Motherboard Compact Flash SATA Connection Smart Media xD Picture card MMC SD Memory Stick a2. User Guide A i D Internal IDE SATA USB TECHNOLOGIES DigiDrive AEDMDISU2 4 Pin Floppy Power Port Pa SATA 1 5Gbs Mode Jumper JP4 Data Port Close or Open Pin 1 USB 5 Pin Header Drive Activity LED 4 slots CF SD MMC MiniSD SM r 4 Pin Floppy Power Connector xD MS MS Duo and MS Pro Duo SATA Port 2 Slave SATA Port 1 Master Standard 40 Pin IDE Interface for Mounting Directly onto Motherboard IDE Channel Mode Jumper JP4 Note Only applies on SATA connection The internal SATA USB DigiDrive supports Type l II CF Cards CF Micro drive SD SDHC miniSD with adapter Trans flash SD HS Secure Digital High Speed MMC Cards 4 bit and 8 bit modes RS MMC MMC Micro MMC Plus Smart Media xD picture card both H and M types Memory stick Memory stick PRO MS Extreme III Type media MS PRO HS 4 bit mode v7 1 11 Technical Support If you need any assistance to get your unit functioning properly please have your product information ready and contact Addonics Technical Support at Hours 8 30 am 6 00 pm PST Phone 408 453 6212 Email http www addonics com support query l Sang up the device in SATA mode Connect a 4 pin floppy power cable from PC to the internal SATA USB DigiDrive Attach SATA cable from internal SATA USB DigiDrive to the PC SATA port The tables show drive icon and media detection behavior basing on the mode switch setting and the type of SATA port the internal S
Download Pdf Manuals
Related Search