Acu-Rite 13239CCC4 User's Manual
Contents
1. included AC Power adaptor to a standard power outlet to provide constant power to the alarm clock Bas c Setup After powering on the alarm clock it is recommended that the time and date be manually set initially After the initial manual time setting the radio controlled atomic clock will maintain it s accuracy and adjust for DST automatically PRESS the CLOCK ADJUST button to enter into setting mode Press w or to adjust the currently selection Then press the CLOCK ADJUST button to save your adjustments and continue TIME FORMAT 12 or 24 hour clock TIME ZONE HOURS MINUTES MONTH DATE YEAR ALL DONE The clock will return to normal display mode when no buttons are pressed for 10 seconds Select F or C Indoor Temperature Make sure you are in current time display mode then press the a button to toggle between F and C indoor temperature display DST ON OFF The atomic clock will automatically adjust for Daylight Saving Time DST if the DST switch located on the back of the clock is ON Switch the DST switch to the OFF position if your area does not observe any DST changes Turn Off Atomic Radio Controlled Clock Function The atomic clock can be turned Off by pressing AND HOLDING the CLOCK ADJUST button for 10 seconds RCC OFF will display confirming you have disabled the radio controlled clock function Now the clock will function as a stan2. ARTICULAR PURPOSE CHANEY EXPRESSLY DISCLAIMS ALL LIABILITY FOR SPECIAL CONSEQUENTIAL OR INCIDENTAL DAMAGES WHETHER ARISING IN TORT OR BY CONTRACT FROM ANY BREACH OF THIS WARRANTY SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 1 Alarm Clock DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU CHANEY FURTHER DISCLAIMS ALL LIABILITYFROM I W o o o a 3 PERSONAL INJURY RELATING TO ITS PRODUCTS TO THE EXTENT PERMITTED BY LAW BY ACCEPTANCE OF ANY OF CHANEY S 1 Instruction Manual EQUIPMENT OR PRODUCTS THE PURCHASER ASSUMES ALL LIABILITY FOR THE CONSEQUENCES ARISING FROM THEIR USE OR MISUSE NO PERSON FIRM OR CORPORATION IS AUTHORIZED TO ASSUME FOR CHANEY ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF ITS PRODUCTS FURTHERMORE NO PERSON FIRM OR CORPORATION IS AUTHORIZED TO MODIFY OR WAIVE THE TERMS OF THIS PARAGRAPH AND THE PRECEDING PARAGRAPH UNLESS DONE IN WRITING AND SIGNED BY A DULY AUTHORIZED AGENT OF Thank You for purchasing this AcuRite product This alarm clock features Atomic CHANEY THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO TATE clock technology which maintains split second accuracy and automatically changes for Daylight Saving Time Please read this manual to fully enjoy the For in warranty repair please contact e e benefits and features of this product Please keep this manual for
3. LIMITED ONE YEAR WARRANTY Chaney Instrument Company warrants that all products it manufactures to be of good material and workmanship and to be free of defects if properly installed and operated for a period of one year from date of purchase REMEDY FOR BREACH OF THIS WARRANTY IS i EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE ITEMS Any product which under normal use and service is proven ATCT UJ f 2 I FE goj Ct O N A la rm C Lo C K to breach the warranty contained herein within ONE YEAR from date of sale will upon examination by Chaney and at its sole option be y with Atomic Clock repaired or replaced by Chaney In all cases transportation costs and charges for returned goods shall be paid for by the purchaser DESIGNED TO WORK FOR YOU 12229CCDI Chaney hereby disclaims all responsibility for such transportation costs and charges This warranty will not be breached and Chaney will give no credit for products it manufactures which shall have received normal wear and tear been damaged tampered abused improperly installed damaged in shipping or repaired or altered by others than authorized representatives of Chaney Instruction Manual Package Contents THE ABOVE DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED AND ALL OTHER WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A P
4. LIP THE PROJECTOR DISPLAY You may want to flip the projected TIME info to allow It to read normally on the desired surface To flip the time display press the 8 FLIP button BACKUP BATTERIES Install 3 AA Alkaline batteries to power the clock and alarm functions during a power outage The Alarm Clock will function powered by batteries alone but the projector and backlight can only be activated momentarily to conserve batteries by pressing the SNOOZE LIGHT button the clock will maintain it s accuracy and automatically switch for daylight saving time provided the atomic radio controlled clock is enabled ON and the signal is being successfully received
5. a l Housing e Increase the separation between the equipment and the receiver l e Connect the equipment into an outlet on a circuit different from that to which the Function receiver is connected Buttons e Consult the dealer or an experienced radio TV technician for help NOTE The manufacturer is not responsible for any radio or TV interference caused by unauthorized AC Power Focus modifications to this equipment Such modifications could void the user authority to operate the Adjustment equipment aa ie on back on Dac www AcuRite com 877 221 1252 YOUR PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE Gp lt a Omi L Atomic Clock PRODUCT REGISTRATION i A Visit us online to f E 7 m m activate your lt ay a See ted Omil product warranty MO DATE TIMEDAYZONE TEMP www AcuRite com ic i on DoR 3p E RECEIVED Ol 13239CCDI 061912 About the Atomic Clock In North America the National Institute of Standards and Technologies operates an atomic clock transmitter which transmits the time codes via radio frequency This AcuRite clock features a receiver which receives the signal allowing the clock to maintain super accurate time NOTE Due to solar radiation in the atmosphere the atomic clock signal is weaker during the day Synchronization with the atomic clock signal Is likely to be more successful late at night when there is less atmospheric interference SETUP AC Power Adaptor Plug in the
6. dard digital clock Repeat the same process to enable the Atomic Clock OPERATION las Set the Alarm Time 1 Press the ALARM ADJUST button The HOUR will flash 2 Press the w or a buttons to adjust the alarm time HOUR Press the ALARM ADJUST button to save your adjustments and continue 3 Press the w or a buttons to adjust the alarm time MINUTES Press the ALARM ADJUST button to save your adjustments and exit 4 Turn the Alarm ON or OFF 4 TO TURN ALARM ON Press the ALARM ON OFF button The 4 icon will appear on the screen verifying that you have turned the alarm ON TO TURN ALARM COMPLETELY OFF Press the ALARM ON OFF button The 4k icon will not be present verifying that you have turned the alarm OFF Alarm Clock Snooze Function When the ALARM is sounding pressing the SNOOZEeLIGHT button will silence SNOOZE the alarm sound for 5 minutes Time Projector BATTERY POWER Press the SNOOZEeLIGHT button to momentarily turn on the projector for 4 seconds at a time This is done to conserve battery power WHEN PLUGGED IN The projector is on constantly by default Slide the ON OFF switch located on the back of the projector to OFF if you wish to turn the projector off FOCUS Aim the projector at the area you would like to display the time and indoor temperature then focus the image by turning the FOCUS dial on the back of the clock F
7. future Chaney Instrument Company reference 965 Wells Street H NOTE A protective film is applied to the display at the factory that must be This device complies with part 15 of the FCC rules Operation is subject to the removed prior to using this product Locate a corner and peel to remove OLLOWING TWO conditions j 1 This device may NOT cause harmful interference and i OVERVIEW OF FEATURES 2 This device must accept any interference received including interference that may cause undesired operation SNOOZEeLIGHT NOTE This equipment has been tested and found to comply with the limits for a Class B digital device A i a Projector LENS pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against FLIP do not touch harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However There is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try Display Adjustable to correct the interference by one or more of the following measures Projector e Reorient or relocate the receiving antenn
Download Pdf Manuals
Related Search