ACDelco LG08 User's Manual
Contents
1. in step 8 domed side facing up and carefully insert Inner Housing screw shut with End Cap and rotate until it fits fully inside2. User Guide Educational Kit FARADAY STAA PERPETUAL FLASHLIGHT IMPORTANT FARADAY STAR must be fully charged for the first use Modern technology and Faraday s Law of Inductance join forces to create a virtually indestructible flashlight that has no need for batteries or bulbs Shaking the torch causes a high strength magnet to pass back and forth between a wire coil giving charge to the flashlight s capacitor that can be stored for months Just 30 seconds of shaking can generate up to 2 minutes of light and the super bright LED can be seen for up to a mile and never needs to be replaced Fig 1 Faraday Star is an indispensable accessory Ideal for any outdoor activity including camping hiking boating as well as general emergency situations Using the Faraday Star The Faraday Star is charged by shaking no batteries are needed just shake vigorously side to side for around 30 seconds See fig 1 Press the switch to turn on and release to turn off See fig 2 Duration The Faraday Star provides up to 2 minutes of continuous use when charged for 30 seconds If it is completely drained of energy or used for the first time the Faraday Star should be turned off and shaken vigorously to fully charge the capacitor Cautions 1 There is a strong magnetic field surrounding the Faraday Star DO NOT place the Faraday Star within 30cm of cassette tapes computer floppy disc video tapes credit car
3. ds pacemakers televisions monitors or any other magnetic storage device or device affected by a magnetic field 2 Do not attempt to remove the LED or any internal part Care and maintenance Clean with damp cloth e Clean the lens with standard glass cleaning products e Do not use petroleum based liquids such as gasoline or kerosene or solvents such as acetone to clean any part of the flashlight ACVdDelcoa ACDelco is a trademark of General Motors Corporation used under license to Daka Development Ltd Model no LGO8 Contents Qo D Q Ne SS iy Switch Cover x 1 Magnet x 1 Rubber Bumper x 2 LED Bulb x 1 0 ft B Outer Housing x 1 Inner Housing x 1 Inner Housing End Cap x 1 End Cap x 1 Lens x 1 Screw x 4 Switch x 1 Assembly 1 Insert Rubber Bumper in Inner 2 Cut off excess rubber Housing End Cap and pull to snap in from Rubber Bumper place 3 Insert second Rubber 4 Cut off excess rubber Bumper into Inner j Housing and pull using pliers to snap in place 5 Screw PCB onto Inner Housin 6 Insert L E D and into making sure wires are onnee as Inner Housing and make sure L E D is pushed fully into place Make sure the flat side of the L E D lines up with the flat side of the L E D socket 7 Insert Magnet into Inner Housing 8 Locate switch in hole in and push Inner Housing End Cap into Flashlight Body place 9 Keeping Outer Housing in gt 10 Place Lens in place with same position as
Download Pdf Manuals
Related Search