3M Strap Respirator Owner's Manual
Contents
1. achieve a proper seal cannot achieve a proper seal do not enter the contaminated do not enter the contaminated area See your supervisor area See your supervisor 3M Fitting Instructions for 3M Elastomeric 10007 Full Face 4 Strap Respirator page 2 of 2 A WARNING These respirators help reduce exposure to certain airborne contaminants Misuse may result in sickness or death Before use the wearer must read and understand User Instructions provided as a part of product packaging Time use limitations may apply For proper use see package instructions Supervisor or call 3M OH amp ESD Technical Service in U S A 1 800 243 4630 In Canada call 1 800 267 4414 Important Before using these respirators you must determine the following 1 The type of contaminant s for which the respirator is being selected 2 The concentration level of contaminant s s For more information please contact 3 Whether the respirator can be 3M Occupational Health and properly fitted on the wearer s Environmental Safety Division face Do not use with beards OH amp ESD on other facial hair or other conditions that prevent a good seal between the face and the faceseal of the respirator 4 Before use of these respirators a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910 134 including training medical evaluation and fit testing2. 10007 page 1 of 2 Fitting Instructions for 3M Elastomeric Full Face 4 Strap Respirator Wearing your elastomeric full face 4 strap respirator Fully loosen all four head straps Pull hair back with one hand Bring facepiece up to face with other hand While holding the facepiece in place pull the straps over your head Tighten the two bottom straps Tighten the two top straps Yn NO ee Issue Date 01 01 04 Check the seal of your elastomeric full face 4 strap respirator each time you don the respirator 1 Positive Pressure User Seal Check Place the palm of your hand over the exhalation valve cover and exhale gently The facepiece should bulge slightly If air leaks between the face and the faceseal of the respirator reposition it and adjust the straps for a tighter seal If you cannot achieve a proper seal do not enter the contaminated area See your supervisor Using Particulate Filters Using Cartridges Place your thumbs over the Place the palms of your hands center of the particulate filters over the cartridges and inhale and inhale gently The facepiece gently The facepiece should should collapse slightly If air collapse slightly If air leaks leaks between the face and the between the face and the faceseal of the respirator faceseal of the respirator reposition it and adjust the reposition it and adjust the straps for a tighter seal If you straps for a tighter seal If you cannot
Download Pdf Manuals
Related Search