3M MPro120 User's Manual
Contents
1. SM MPro120 OPIN 5 000 00001000 3M Pocket Projector MPro120 2 O 2009 3M All Rights Reserved 3M Pocket Projector MPro120 Contents Intended Use Statement Trademarks and Copyrights Safety Information Getting Started Making Connections Operating Instructions Troubleshooting Specifications Limited Warranty 2009 3M All Rights Reserved 3M Pocket Projector MPro120 Intended Use Statement The 3M Pocket Projector MPro120 is designed to operate with the 3M specified battery and 3M battery charger and in a normal office and home environment e 10 35C 50 95F e 10 80 RH without condensation e 0 1829 m 0 6000 feet above sea level The ambient operating environment should be free of airborne smoke grease oil and other contaminants that can affect the operation or performance of the projector Use of this product in adverse conditions will void the product warranty Trademarks and Copyrights 3M is a trademark of 3M Company VGA and XGA are trademarks of International Business Machines Corporation S VGA is a registered trademark of the Video Electronics Standards Association No publication or commercial use may be made of this material without the express written permission of 3M Safety Information Please read understand and follow all safety information con2. mechanical or electronic made to the 3M product e This warranty covers only normal use of the product 24 hour per day or other excessive continual use causes strain and is not considered normal use f This warranty does not cover consumables e g batteries g This warranty is not transferable h 3Mis not responsible for warranty service should the 3M label or logo or the rating label or serial number be removed unless otherwise stated in writing for the purposes of private labeling for partnership requirements i This warranty does not cover postage insurance or shipping costs incurred in presenting your 3M product for warranty service Said costs are the customer s responsibility If a Claimed defect cannot be identified or reproduced in service the customer may be held responsible for cost incurred Should your warranty upgrade include a change out service and the claimed defect cannot be identified or reproduced by the technician the customer will be responsible for call out costs FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THE APPROPRIATE 3M PRODUCT MANUAL OR TO USE THE 3M PRODUCT IN ACCORDANCE WITH 3M S INTENDED USE STATEMENT WILL VOID ALL WARRANTIES AND LIMITED REMEDIES 2009 3M All Rights Reserved 29 3M Pocket Projector MPro120 EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL 3M SHALL NOT BE LIABLE FOR ANY INDIRECT INCIDENTAL SPECIAL OR CONSEOUENTIAL DAMAGES INCLUDING BU
3. NTSC PAL 480i 480p 576i 576p 4 72 x 2 4 x 0 98 in 120 x 60 x 25 mm 5 6 oz 160 g 14 20 50 95 F 10 35 0 10 8096 RH without condensation Sea Level to 1 829 m 6000 2009 3M All Rights Reserved Projection Distance Image Size Throw Ratio Diagonal Distance Lens Offset Inputs Compatible Resolutions Vertical Scan Rate Horizontal Scan Rate Video Compatibility Video Resolutions Dimensions Weight Tripod Socket Operating Conditions Temperature Range Humidity Range Altitude Range 26 3M Pocket Projector MPro120 BLP508 001 Rechargeable Lithium lon Battery Description Specification Type BLP508 001 Rechargeable Lithium lon Polymer Battery Rated Capacity 3 7V 2200 mAh 8 1 Wh Dimensions 62 4 x 53 8 x 10 5 mm Important Note Do not throw battery into trash Please dispose of according to federal state or local laws Supported Computer Signals Description Resolution width x height Refresh Rate VGA 640 x 480 60 Hz SVGA 800 x 600 60 Hz XGA 1024 x 768 60 Hz WXGA 1280 x 768 60 Hz Replacement Parts Accessories Power Adapter with US EU UK AUS plugs 78 6972 0003 4 Lithium lon Polymer Battery 78 6972 0004 2 AV Video Cable 78 6972 0006 7 VGA Cable 78 6972 0007 5 Car Charger 78 6972 0002 6 Component AV cable 78 6972 0005 9 3M Adapter Cable for Apple 78 6972 0001 8 Portable Presentation Binder 78 6969 9997 4 2009 3M All Rights Reserved 27 3M Pocket Project
4. system components in accordance with applicable government regulations To reduce the risks associated with LED bright light e Do not stare directly into the projector lens To reduce the risks associated with tripping and falling e Position the charging cord and data cables so that they can not be tripped over SAVE THESE INSTRUCTIONS 6 O 2009 3M All Rights Reserved 3M Pocket Projector MPro120 Safety Labels A 60e LITHIUM ION POLYMER BATTERY 3 7V 2200mAh 8 1Wh P N 78 6972 0004 2 A Warning Use a specified charger Do not throw the battery into fire or heat 2 Do not short circuit the battery terminals Al Metu Assembly by Merry Electr NS LISTED MH10038 Y MADE IN CHINA LITHIUM ION POLYMER BATTERY Model No BLP508 001 3 7V 2200mAh 8 1Wh P N 78 6972 0004 2 A Warning e Usea specified charger e Donotthrow the battery into fire or heat e Donotshort circuit the battery terminals e Do not disassemble the battery Charging Specification Standard Charge 0 44A 4 2N Cut Off Current 44mA Max Charge 2 2N 4 2N Cut Off Current 44mA LED Light Output Maximum Radiant Power CLASS 1 LED PRODUCT IEC60825 1 1993 A1 1997 A2 2001 0 59 mW 2009 3M All Rights Reserved 7 3M Pocket Projector MPro120 FCC STATEMENT CLASS B This eguipment generates uses and can radiate radio freguency energy and if not installed and used in accordance with the ins
5. 120 Package Contents 1 3M Pocket Projector MPro120 Table Top Tripod Rechargeable Battery Carrying Pouch Outlet Adapters 4 Power Adapter AV Adapters Product Warranty and Safety Guide Quick Start Guide AV Cable VGA Audio Cable N O 0 Co N k O 10 2009 3M All Rights Reserved 3M Pocket Projector MPro120 Parts Power Button Brightness Mode Button Volume Down Button Volume Up Button Battery Status Button Status Indicator Focus Wheel Lens AN O a Co N Speaker VGA AV Input DC Power Input Sin a ND Battery Cover Tripod Socket Flip Stand 4 lt R 2009 3M All Rights Reserved 11 3M Pocket Projector MPro120 Getting Started Install Battery The 3M MPro120 comes with a rechargeable battery The battery is quick and easy to install and comes partially charged To install the battery slide the back cover off insert the battery and reinstall the cover Important Note Use only the 3M specified battery 78 6972 0004 2 Battery Maintenance Tips e Remove the battery when the projector will not be used for one or more weeks e Charge and discharge the battery at least once a month e When storing a battery for more than a month store the battery at 50 charge e Do not store a fully discharged battery because it may lose the ability to be recharged e Do not store a fully charged battery because it may lose the ability
6. 5 56 cm 11 1 4 in 28 4 cm 8 3 8 in 21 3 cm 11 3 4 in 29 9 cm 20 in 50 8 cm 16 in 40 6 cm 12 in 30 5 cm 16 3 4 in 42 7 cm 26 in 66 04 cm 20 3 4 in 52 8 cm 15 5 8 in 39 6 cm 21 7 8 in 55 5 cm 32 in 81 28 cm 25 5 8 in 65 0 cm 19 1 4 in 48 8 cm 26 7 8 in 68 3 cm 38 in 96 52 cm 30 3 8 in 77 0 cm 22 3 4 in 57 9 cm 31 7 8 in 81 1 cm 44 in 111 76 cm 35 1 4 in 89 0 cm 26 3 8 in 67 6 cm 37 in 93 9 cm 50 in 127 cm 40 in 101 6 cm 30 in 76 2 cm 42 in 106 7 cm Important Note As you increase the size of the projected image you will need to decrease darken the ambient room lighting Adjusting the Focus Turn the focus wheel to sharpen the image 20 2009 3M All Rights Reserved 3M Pocket Projector MPro120 Changing the Brightness Press the Brightness button to switch between normal brightness conserves battery power and high brightness increases light output by 20 An icon will appear on the screen to indicate the current setting High Brightness Low Brightness Adjusting the Volume Press the Volume up or Volume down button to adjust the sound A volume bar will appear on the screen to help you set the volume level Checking the Battery Level To check the battery press the Battery Status button A battery bar will appear on the screen indicating the amount of charge currently in the battery Power Adapter Note The battery status will not appear when the pow
7. T NOT LIMITED TO LOSS OF PROFITS REVENUE OR BUSINESS RESULTING FROM OR IN ANY WAY RELATED TO PERFORMANCE USE OR INABILITY TO USE ANY OF THE 3M PRODUCT This limitation applies regardless of the legal theory upon which damages are sought For warranty support please call or write your local 3M office or a 3M Authorized Service Provider to obtain an RMA Return Material Authorization number before returning the product If you are inside the Continental United States of America please contact 3M Customer Service at 1 866 631 1656 or email meetings mmm com What 3M Will Do To Correct Problems e fyour 3M product requires service 3M will ask you to bring or send the 3M product securely packaged in its original container or equivalent along with proof of the date of original purchase to your 3M Service Dealer or 3M Service Center e 3M will at its option repair or replace the defective unit without charge for parts or labor Return of the 3M product will be at 3M s expense e When warranty service involves the exchange of the 3M product or of a part the item replaced becomes 3M property e The exchanged 3M product or part may be new or previously refurbished to the 3M standard of quality and at 3M s option the replacement may be another model of like kind and quality e 3M s liability for replacement of the warranted 3M product or part will not exceed the original retail selling price of the 3M product Exchange or re
8. by the party responsible for compliance could void the user s authority to operate the equipment CE Statement ElectroMagnectic Compatibility Statement Meets 2004 108 EC Directive Low Voltage Directive Meets 2006 95 EC Directive 8 2009 3M All Rights Reserved 3M Pocket Projector MPro120 WEEE Statement The following information is only for EU members States The mark shown to the right is in compliance with Waste Electrical and Electronic Eguipment Directive 2002 96 EC WEEE The mark indicates the reguirement NOT to dispose the eguipment as unsorted municipal waste but use the return and collection systems according to local law RoHS Statement 3M Projection Systems can provide RoHS certification for products meeting the RoHS directive European EU Restriction of Hazardous Substances RoHS Directive 2002 95 EC RoHS compliant means that the product or part does not contain any of the substances in excess of the following maximum concentration values in any homogeneous material unless the substance is in an application that is exempt under RoHS as amended a 0 1 by weight for lead mercury hexavalent chromium polybrominated biphenyls or polybrominated diphenyl ethers or b 0 0196 by weight for cadmium This information represents 3M s knowledge and belief which may be based on information provided by third party suppliers to 3M 2009 3M All Rights Reserved 9 3M Pocket Projector MPro
9. ctor and requires controlled lighting conditions The image may appear very dim in brightly lit rooms e Make sure the status indicator is green This indicates that the projector is powered on and projecting an image e Project the image onto a flat white surface e Decrease the light on the surface where the image is being projected e Decrease the size of the image e When there is nothing connected to the projector it will project a white image with the red 3M logo The projector is displaying a question mark e The projector does not support the video or computer input signal Switch to a video or computer signal that the projector supports See page 24 24 2009 3M All Rights Reserved 3M Pocket Projector MPro120 A computer is connected to the projector but the projector will not display the computer s image e Unplug the VGA Audio cable from the projector and a white image with the 3M logo will display e Plug the VGA Audio cable into the projector and the icon in the upper left corner of the image will change from a waiting on cable to the VGA Audio cable icon See ndicator Lights and On Screen Icons on page 23 The projector is making a noise e The projector has a small fan for cooling the LED light source The fan turns on and off automatically based on the projector s internal temperature The fan will turn on more often in warm environments or at high altitudes
10. d some personal digital assistants PDAs The projector supports VGA SVGA XGA and WXGA resolutions 1 Connect the VGA Cable to the MPro120 projector 2 Connect the VGA Cable to the computer s video and audio outputs 3 Set the computer resolution to one of the supported resolutions Description Resolution width x height Refresh Rate VGA 640 x 480 60 Hz SVGA 800 x 600 60 Hz XGA 1024 x 768 60 Hz WXGA 1280 x 768 60 Hz 18 2009 3M All Rights Reserved 3M Pocket Projector MPro120 Operating Instructions Powering On Press and hold the power button for 3 seconds Release the power button when the projector begins to project an image and the status indicator turns green Tip The video output on some devices is turned off by default Please refer to the device s documentation for details on enabling the video output Powering Off Press and hold the power button for 3 seconds Release the power button when the projected image is gone The projector is OFF when the Status indicator is OFF or during battery charging when the Status Indicator is amber 2009 3M All Rights Reserved 19 3M Pocket Projector MPro120 Adjusting Image Size The 3M MPro120 can project an 8 to 50 inch 203 1270 mm diagonal image Refer to the chart below Diagonal SIze Image Width Image Height Projector to Screen Distance 8 in 20 32 cm 6 3 8 in 16 2 cm 4 3 4 in 12 2 cm 6 3 4 in 17 0 cm 14 in 3
11. e The speakers make noise when the volume setting is 4 and nothing is connected to the projector audio inputs This is typical Reduce the projector s volume setting to 0 e The speakers make noise when the component AV cable is not correctly connected to the video device There are two red connectors on the component AV cable One is for the right audio channel and the other is for the Pr component video signal If these connectors are switched the projected image will appear green and an abnormal noise will come from the right speaker My video device is connected to the projector but the projector will not display the video e Unplug the AV cable from the projector and a white image with the 3M logo will display e Plug the AV cable into the projector and the icon in the upper left corner of the image will change from a waiting on cable to the VGA Audio cable icon See Status Indicator ights and On Screen Icons on page 24 e The video output on some devices is turned off by default Please refer to the device s documentation for details on enabling the video output 2009 3M All Rights Reserved 25 3M Pocket Projector MPro120 Specifications Projector Imager Technology LCOS Size 9 4 mm 0 37 Resolution 640 x 480 Pixels Aspect Ratio 4 3 6 34 in 42 in 171 1067 mm 8 in 50 in Diagonal 0 84 1 1 1 none DC in VGA AV VGA SVGA XGA WXGA 60 Hz 31 5 kHz 49 68kHz
12. er adapter is connected to the projector The power adapter icon will appear instead 2009 3M All Rights Reserved 21 3M Pocket Projector MPro120 Attaching the Tripod The projector includes a table top tripod that mounts to the bottom of the projector Tip The 3M MPro120 will attach to most camera tripods Cleaning Projector 1 Turn off the projector and disconnect power and other cables 2 Use a soft cloth such as the 3M High Performance Cleaning Cloth to wipe off dust If the dust is difficult to remove dampen the cloth with clean water and then wipe the projector clean Then use a clean cloth to dry the projector Important Note Do not use cleaning chemicals or solvents to clean the projector Cleaning chemicals and solvents may cause the plastic parts to discolor 22 2009 3M All Rights Reserved 3M Pocket Projector MPro120 Status Indicator Lights and On Screen Icons Icon Description Meaning Im The projector is waiting for the A V cable to be connected The projector detects the audio video cable HUB The projector detects an NTSC video input signal NTSC PAL The projector detects a PAL video input signal The projector detects the component audio video cable The projector detects the video input signal and displays the video source s resolution and refresh rate below the component icon RGB 4801 60Hz The projector detects the VGA Audio cable The project
13. ery to direct sunlight in a closed space such as a vehicle Do not carry the battery in pockets purses or handbags where it may contact metal objects Do not place battery in contact with metal objects Do not expose or store battery in direct sunlight or excessive heat gt 60 C or 140 F moist or caustic environments To reduce the risks associated with driver distraction e Do not use this projector in a moving motor vehicle 2009 3M All Rights Reserved 5 3M Pocket Projector MPro120 A Warning To reduce the risk associated with fire and explosion battery leakage or overheating Do not immerse the battery in water or allow to get wet Do not reverse the positive and negative terminals Do not connect the battery directly to a wall outlet Use only the 3M specified wall charger or automobile charger Do not strike throw or subject the battery to physical shock Do not pierce the battery or break it open Keep batteries out of the reach of children Do not recharge the battery near a heat source or in extremely hot conditions Do not use the battery if it gives off an odor generates heat or becomes discolored or deformed Keep away from exposed flames if the battery leaks or emits an odor Flush the eyes with water and seek medical attention if the battery leaks and electrolyte gets in the eyes A Caution To reduce the risk associated with environmental contamination e Dispose of all
14. omplete the Status Indicator will turn off a 110 240 VAC A 50 60 Hz Important Notes The battery will take longer to charge when the projector is being used On average the battery will take 3 hours to charge The battery has a lifespan and ages every time it is fully charged and discharged The battery will gradually loose charge capacity as it ages Therefore as the battery ages the battery life will decrease 14 2009 3M All Rights Reserved 3M Pocket Projector MPro120 Making Connections Connecting to a Composite Video Device Use the AV Cable to input video from camcorders digital cameras DVD players and digital media players into the VGA AV input on the projector 1 Connect the AV cable to the projector s VGA AV input 2 Connect the other end of the AV cable to the video device s audio and video outputs Tip Some video devices do not have the standard audio and video connections and may reguire an AV cable specified by the manufacturer The AV cable allows you to connect your video device to your TV monitor or your projector and may be purchased from the video device manufacturer Once you have the AV cable you may need the cable adapters to connect the video device cable and the projector cable 2009 3M All Rights Reserved 15 3M Pocket Projector MPro120 Connecting to a Component Video Device For component video input you must purchase the optional 3M MPro120 C
15. omponent AV Cable This cable sends a higher guality video signal for the best possible image 1 Connect the Component AV cable to the projector s VGA AV input 2 Connect the other end of the AV cable to the video device s audio and video outputs Important Note There are two red connectors on the Component AV cable One is for the right audio channel and the other is for the Pr component video signal Be careful to connect the red audio to red audio and red video to red video If these connectors are switched the projected image will appear green and an abnormal noise will come from the right speaker 16 2009 3M All Rights Reserved 3M Pocket Projector MPro120 Tip Some video devices do not have the standard audio and video connections and may reguire an AV cable specified by the manufacturer The AV cable allows you to connect your video device to your TV monitor or your projector and may be purchased from the video device manufacturer Once you have the AV cable you may need the cable adapters to connect the video device cable and the projector cable Some video devices by default will not output a video signal The video device s manual should provide instruction to change the video output setting O 2009 3M All Rights Reserved 17 3M Pocket Projector MPro120 Connecting to a Computer Use the VGA Audio cable to connect the projector to desktop computers laptop computers ultra portable computers an
16. or MPro120 Limited Warranty e The 3M Pocket Projector MPro120 the 3M product is warranted to be free from defects in material or manufacture for a period of 1 year from the date of purchase e All other accessories included with the 3M product are warranted to be free from defects in material or manufacture for a period of 1 year from the date of purchase e Optional product accessories that are not sold as part of the 3M product are subject to individual warranties THE WARRANTIES STATED ABOVE ARE EXCLUSIVE AND ARE MADE IN PLACE OF ANY AND ALL WARRANTIES EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY INDUSTRY PRACTICE OR CUSTOM OR TRADE USAGE In the event the 3M product fails to conform to the above stated warranties within the applicable warranty period your exclusive remedy shall be at 3M s option to replace or repair the 3M product or to refund the purchase price of the 3M product All replaced parts or products become property of 3M If the product is repaired 3M will repair the defective part s with a new or used part s If the 3M product is replaced 3M will replace the 3M product with the same or equivalent model and with a new or refurbished 3M product In the case of an approved warranty claim the replacement 3M product will carry only the remaining term of the original 3M product s warranty period as stated above For
17. or detects computer input signal and displays the input resolution and refresh rate 800x600 2 The projector does not support the video signal The projector is measuring and synchronizing to video input signal Projector is off If the power adapter is connected to the projector and the battery is installed the battery is fully charged Status Indicator Green The projector is on Status Indicator Amber The projector is off and charging the battery Status Indicator Flashing Red The projector can not turn on because the battery needs to be charged Status Indicator Flashing Green The projector has overheated and needs to cool Status Indicator Blank Rights Reserved 23 gt O 2009 3M 3M Pocket Projector MPro120 Troubleshooting The projector will not turn on e The battery is not installed or the power adapter is not connected to the projector and a working wall outlet Test the electrical outlet by plugging another electrical device like a radio into the wall outlet and confirm that the wall outlet works e The battery is installed in the wrong orientation See Install Battery on page 2 e Hold down the power button until the projector powers up The Status Indicator is flashing red when the power button is held down e The battery needs to be charged See Charge the Battery on page 14 The image is not visible or is very dim e The 3M MPro120 is a battery operated proje
18. placement products or parts assume the remaining warranty period of the product covered by this limited warranty 30 2009 3M All Rights Reserved 3M Pocket Projector MPro120 O 2009 3M All Rights Reserved 31 3M is a trademark of 3M Company Projection Systems 3M Austin Center 6801 River Place Blvd Austin TX 78726 9000 866 631 1656 Please Recycle Printed in USA www 3M com meetings 3M 2009 All Rights Reserved meetings mmm com 78 6971 1494 6 A
19. tained in these instructions prior to the use of this projector Retain these instructions for future reference Explanation of Signal Word Conseguences A Warning Indicates a potentially hazardous situation which if not avoided could result in death or serious injury and or property damage Caution Indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury and or property damage 4 O 2009 3M All Rights Reserved 3M Pocket Projector MPro120 A Warning To reduce the risk associated with hazardous voltage e Donotmodify this product in any way Use only 3M approved replacement components e Donotattempt to service this projector other than battery replacement There are no user serviceable parts other than the battery Service to be performed only by a 3M authorized service provider using 3M approved system components e Donotuse the wall power supply in a wet environment e Donotuse with a damaged wall power supply Replace damaged part prior to use To reduce the risk associated with fire and explosion e Donotimmerse the projector or battery in any liguid or allow either to get wet Use only 3M approved power supply and Li lon polymer battery provided Do not disassemble or short circuit the battery Do not dispose of the battery by incineration or fire Do not operate this projector in any environment above 35 C 95 F Do not expose the projector or batt
20. to be recharged to full power 12 2009 3M All Rights Reserved 3M Pocket Projector MPro120 Power Adapter The power adapter is used to charge the battery or power the projector There are four outlet adapters to give you the flexibility to power the 3M MPro120 in most countries You can also power the projector with the 3M MPro120 Car Charger available separately Installing An Outlet Adapter Onto The Power Adapter 1 Select the outlet adapter that will plug into your wall outlet 2 Align the outlet adapter to the power adapter Turn the outlet adapter in the direction of the LOCK arrow to lock it in place Replacing the Outlet Adapter 1 Push the button on the outlet adapter 2 Turn the outlet adapter in the direction of the OPEN arrow 3 Remove outlet adapter 4 Replace with the new outlet adapter 2009 3M All Rights Reserved 13 3M Pocket Projector MPro120 Charge the Battery The 3M MPro120 rechargeable battery gives you up to 4 hours of battery life in normal brightness mode When the battery needs to be charged the Status Indicator will flash red The battery is charged by connecting the 3M MPro120 power adapter to the projector 1 Turn the projector power off 2 Connect the power adapter to the projector s DC in 3 Connect the other end of the power adapter into the electrical outlet 4 The Status Indicator will change to amber while the battery is charging 5 When charging is c
21. truction manual may cause interference to radio communications It has been tested and found to comply with the limits for a Class B computing device pursuant to Subpart B of Part 15 of the FCC Rules which are designed to provide reasonable protection against such interference when operated in a residential installation However there is no guarantee that interference will not occur in a particular installation If this eguipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help NOTICE This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada INSTRUCTIONS TO USERS This equipment complies with the requirements of FCC equipment provided that the following conditions are met If the cables include a EMI ferrite core attach the ferrite core end of the cable to the projector Use the cables which are included with the projector or specified Note Changes or modifications not expressly approved
22. warranty service you must provide proof of the date of the original purchase else the manufacturing code date will be used to establish the start date of the warranty The following are exclusions to the above listed warranty a This warranty does not cover 3M product that is modified or damaged through improper storage misuse abuse accident vandalism improper installation neglect improper shipping damage caused by acts of war disasters such as fire flood and lightning improper electrical current software problems interaction with non 3M products or service other than by an 3M Authorized Service Provider neglect or mishandling by any person Normal wear and tear is not covered under warranty 28 2009 3M All Rights Reserved 3M Pocket Projector MPro120 b 3M product is designed to operate in the typical indoor environment This warranty does not cover 3M product used outside of the following circumstances e 100V 240V AC 50 60 Hz e 10 35 C 50 95 F e 10 80 RH without condensation e 0 1829 m 0 6000 feet above sea level C The air intake and exhaust vent must be clear of obstructions Inadequate air ventilation will cause the 3M product to malfunction or will cause damage to the 3M product which will void the warranty d This warranty does not cover any additional costs including but not limited to those associated with removal cleaning or installation of the 3M product adjustments
Download Pdf Manuals
Related Search