3M Fiber Optic Connector Crimp Tool Owner's Manual
Contents
1. 3M Fiber Optic Connector Crimp Tool Instructions Issue 1 August 1993 The universal 3M brand Fiber Optic Connector Crimp Tool is designed to be used with all 3M field mountable connectors The package contains three sets of crimping dies Each set of dies is designed for different connectors and their marking and application are shown in the following table Die Cavity Application Marking Marking BC ST ST BAYONET FC 1 BICONIC TECS SMA 200 230 PROTECTIVE COVER 8500 psc o scansros 2 4mm CABLE CRIMP RING 3 0mm CABLE CRIMP RING KEVLAR CRIMP AREA ST PUSH PULL 2 4mm CABLE CRIMP RING 3 0mm CABLE CRIMP RING KEVLAR CRIMP AREA Installing the Dies in the Base Tool 1 Select the appropriate set of dies as identified in the table above 2 Squeeze and release the handles of the crimp tool to open the jaws 3 Insert the dies into the jaws with the deep half of the round dies into the movable jaw Match the shallow half with corresponding cavities before inserting 4 Retain the dies loosely with the thumb screws 5 Close the jaws completely to exactly align the dies Then secure them in place by tightening the thumb screws 6 Follow mounting procedures outlined in the appropriate connector instruction manual See listing at right ST is a trademark of AT amp T Important Notice All statements technical information and recommendations related to the Seller s products are based2. mited to the implied warranties of merchantability and fitness for a particular purpose which warranties are hereby expressly disclaimed SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL THEORY INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR STRICT LIABILITY FOR ANY INJURY OR FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER S PRODUCTS THAT WERE DEFECTIVE 34 7034 5908 0 Printed in USA 3M 1993
3. on information believed to be reliable but the accuracy or completeness thereof is not guaranteed Before utilizing the product the user should determine the suitability of the product for its intended use The usor assumes all risks and liability whatsoever in connection with such use Any statements or recommendations of the Seller which are not contained in the Seller s current publications shall have no force or effect unless contained in an agreement signed by an authorized officer of the Seller The statements contained herein 3M Telecom Systems 6801 River Place Blvd Austin TX 78726 9000 800 426 8688 Movable Thumb Screws Lift For Emergency Jaw To secure dies Ratchet Release CONNECTOR INSTRUCTION STYLE MANUAL NUMBER BICONIC 78 6900 1917 5 SC FC 3 34 7033 9144 0 ST BAYONET and FC t ____ 78 6900 1806 0 ST PUSH PULL EPOXY ADHESIVE 78 8073 7530 4 ST PUSH PULL HOT MELT ADHESIVE 78 8073 7529 6 ST BAYONET HOT MELT ADHESIVE 80 6106 2571 9 Crimp Tool Not Reguiives 4262 9 TECS SMA To prevent deformation of the Biconic housing insert the connector from the non recessed side of the die Note The crimp rings for the ST Push Pull Connector have been improved over the ones used in the manuals listed above To obtain a new die to fit previous ST Push Pull crimp tools please call customer service are made in lieu of all warranties express or implied including but not li
Download Pdf Manuals
Related Search