Evolve LFM-20
Contents
1. 2013 PRODUCT OVERVIEW LFM 20 Product Description Specifications Isolated Contact Fixture Module The Evolve Isolated Contact Fixture Module is a component of the Evolve lighting control system and can handle loads of up to 277v The device can be easily mounted in a single or multi gang electrical box in any existing environment and is compatible with Z Wave security systems Inclusion of this Module on a Z Wave network allows remote ON OFF control of the load connected and it s fully scene capable This Isolated Contact Fixture Module is designed to work with other Evolve enabled devices Evolve nodes of other types can be included in the network and will also act as repeaters to increase the range of the network As part of a Z Wave network the LFM 20 will also act as a wireless repeater to ensure that commands intended for another device in the network are received This is useful when the device would otherwise be out of the radio range of the wireless controller There are no field repairable assemblies on this unit If service is needed the unit must be returned where purchased e SKU LFM 20 e Supported Networks Z Wave Signal Frequency 908 42 MHz e Range Up to 100 feet line of sight between the Wireless Controller and or the closest Evolve Receiver Module Power 120 VAC 50 60 Hz e Dimensions 3 H x 1 875 W x 1 5 D e Weight 0 28 Ibs 2013 PRODUCT OVERVIEW Wiring The LFM 202. is wired as follows e Black represents the line input 120VAC e White represents the neutral The LFM 20 and the load must share the same neutral e Blue 1 either blue wire 24V 277V input for load switching Blue 2 either blue wire 24V 277V output for load switching The switch also has a green wire which serves as the ground While there is a yellow wire present it is not needed and should be cut and capped with either electrical tape or a wire nut 24 to 2 V Neutral White Blue LOAD 20A ie Black one Line Status LED m Push button to add Yellow node to network Green Ground In the case of a 3 way or 4 way circuit traveler wires are not used when building an Evolve network Instead an LFM 20 may be used in conjunction with an LTM 5 to create a wireless virtual 3 way See LTM 5 for further details
Download Pdf Manuals
Related Search