Evolve LSM-15
Contents
1. LSM 15 Product Description Specifications 2013 PRODUCT OVERVIEW Binary Switch The LSM 15 Wall Mounted Binary Switch is a component of the Evolve lighting control system Inclusion of this Switch on a Z Wave network allows remote ON OFF control of loads connected and is compatible with Z Wave security systems It can be used on any type of 120 VAC fixture or bulb type with a 15A limit This Wall Mounted Binary Switch is designed to work with other Evolve enabled devices Evolve nodes of other types can be included in the network and will also act as repeaters to increase the range of the network The Switch also has a replaceable trim ring available in assorted colors As part of a Z Wave network the LSM 15 will also act as a wireless repeater to ensure that commands intended for another device in the network are received This is useful when the device would otherwise be out of the radio range of the wireless controller e SKU LSM 15 e Supported Networks Z Wave Signal Frequency 908 42 MHz e Range Up to 100 feet line of sight between the Wireless Controller and or the closest Evolve Receiver Module e Power 120 VAC e Dimensions 4 5 H x 2 75 W x 1 75 D e Weight 0 29 Ibs Wiring 2013 PRODUCT OVERVIEW The LSM 15 is wired in the same fashion as a conventional digital switch it requires a minimum of 3 wires to operate e Black represents the line input 120VAC e White represents the neutra2. l e Blue represents the load switch leg The switch also has a green wire which serves as the ground While there is a yellow wire present it is not needed and should be cut and capped with either electrical tape or a wire nut In the case of a 3 way or 4 way circuit traveler wires are not used when building an Evolve network Instead an LSM 15 may be used in conjunction with an LTM 5 to create a wireless virtual 3 way See LTM 5 for further details
Download Pdf Manuals
Related Search