Brodit ProClip 532390
Contents
1. Holder and Charging Specifications Item no 530390 532390 Reference doc 311 1166 Hytera PD702 PD785g PD782 Features amp Benefits Holder Always keep your battery fully charged Made of high grade ABS plastic Charges Li lon or Li Poly batteries Works in 12 and 24 volt vehicles Rapid and trickle charges radio LED Red to Green charging status indicator Custom fit to hold device securely Designed and manufactured in Sweden Allows one handed insertion and removal of radio You can charge just the battery alone in the holder Works with or without belt clip on back of radio Charging cable attached to holder providing dock type connection Attach to ProClip Vehicle or Pedestal mounts Can also be attached directly to any flat surface dashboard console wall or any type of mounting bracket specifications item no 530390 Charging Holder with Cigarette Lighter Plug Material Rugged thermal resistant black ABS plastic FT103 Dimensions WxHxD 64 x 105 x 47 mm Weight 134 g 0 29 lbs Cable Length 54 cm Attachment AMPS hole pattern Holder specifications item no 532390 Charging Holder for Hard Wire Installation Material Rugged thermal resistant black ABS plastic FT 103 Dimensions WxHxD 64 x 105 x 47 mm Weight 118 g 0 26 lbs Cable Length 142 cm Attachment AMPS hole pattern Charging Specifications Lithium based Lithium charging is based on CVCC Constan2. The current limit is set to standards of the producer and shall not be higher
3. t Voltage Constant Current The charging procedure is as follows If the battery is empty or has low charge a constant current charges the battery until the cell voltage reaches 8 4V The LED emits red light Hereafter the charge continues until the current goes down to 0A The battery is now full and stays fully charged A special designed voltage controller is monitoring that the cell voltage is within limit The LED emits green light If the battery is used without disconnecting the charger current is supplied directly resulting in a fast recovery Battery Chemistry Li ion or Li Poly batteries Input Voltage 11 30 V Charging Voltage 8 4 V Timer for Max Charging Time Automatic stops at 8 4 V Max Charging Time 2 3 hours depending on battery capacity Temperature Control Rapid Charge 1A 5 Trickle Charge 0 to 50 mA LED Charging Indicator LED Red to Green indicator Controlled by battery Operating Temperature 40 C to 50 C 40 F to 122 F can be restricted by battery chemistry EMI RFI CE E FCC Part 15 Class B ICES 003 Class B Environmental RoHS Compliant Electrical Testing ISO 7637 and SAE J1455 Input Transient Protected Withstands 200V amp 600V A 2 5A fuse is mounted on the incoming supply Output Short Circuit Protected The charger will supply a maximum current of 1 A which protects both the charger and the connected equipment
Download Pdf Manuals
Related Search