Myfox FO3005
Contents
1. 000 m la Protection rating IP 54 and IK 07 Batteries 2 x AA LR6 Battery life 3 years 8 activations per day Dimensions H 120 mm x L 100 mm x D 24 mm Weight 137 g keypad only batteries not included Warning explosion hazard if the batteries are not replaced with the correct type Always dispose of used batteries appropriately TAG Technologies hereby certifies that this product complies with the essential requirements of the R amp TTE Directive 1999 5 CE A full copy of the declaration of conformity can be found at www myfox fr certificats Important Please sort and dispose of your waste in accordance with applicable legislation All waste should be disposed of in a suitable location and in a way that does not harm the environment TAG Technologies S A S Regent Park II Bat 1 Rue du Lac 31670 Labege France TAG Technologies All rights reserved EMAIL HOTLINE contact tag technologies com 33 0 5 61 00 07 112. mode on your central unit Switch to learning mode on your keypad by pressing the full activation and deactivation buttons simultaneously The keypad activity light will blink orange Swipe your badge over the reader area on the keypad The keypad activity light will turn green and blink quickly The confirmation light will turn green The central unit and keypad will emit a beep to confirm successful pairing Switch to learning mode on your central unit Remove the battery protection tab The keypad activity light will blink orange The confirmation light will turn green The central unit and keypad will emit two beeps to confirm successful pairing Batteries open the battery compartment with a screwdriver and insert Keypad installation fix the plate to the wall using screws or double sided tape Slide the keypad onto the plate and tighten the holding screw at the bottom of the keypad The keypad and plate cannot be used separately the batteries taking care to match the poles correctly 5 Technical specifications Ref FO 3005 Max no of paired badges 48 Frequency Radio 433 92 MHz and RFID 13 56 MHz Two way radio function for acknowledging activation and deactivation Range 150 m free field Low battery indicator on the central unit Self protection system push button anti removal detection mechanism Operating temperature 10 C to 50 C Maximum operating altitude 2
3. EN KEYPAD WITH BADGE READER IT PT GR ES NL PL Internet user interface AND NFC SMARTPHONE User Guide In the interest of simplicity the term badge shall refer to both the badge and the NFC smartphone throughout this document 1 Overview and features 1 Keypad ON light 5 Partial activation button This light indicates that the Works in the same way as the full keypad is on activation button 2 Confirmation light a 6 Deactivation button This light indicates whether the a 5 Works in the same way as the full command function is active green i activation button for active red for inactive 7 Battery protection tab 3 Badge reader area 3 Remove this tab to power up the For authentication swipe your keypad and begin the pairing badge within 3 cm of the badge process with the central unit reader area 8 Wall bracket plate oe The keypad must be fixed to the 4 as a eea wall bracket otherwise the self The light will ii slowly protection system will not work Swipe your badge across the badge reader area e propeniy The confirmation light will turn green and will be permanently lit and you will hear two beeps from The self protection system is activated automatically if the keypad 120705 V1 0 the keypad confirming that the central unit has processed the command is removed from its wall bracket An alert is emitted 2 Pairing with the central unit 3 Pairing badges Switch to learning
Download Pdf Manuals
Related Search