Home

Lancom Systems L-322AGN

image

Contents

1. LANCOM L 322agn dual Wireless Dual Radio Access Point with MIMO technology Two integrated 11n radio modules for simultaneous 2 4 and 5 GHz wireless network operations Power supply via IEEE 802 3af PoE Separation of user groups by Multi SSID and VLAN Four RSMA connectors for special applications requiring external antennas LANCOM Systems More performance The 802 11n standard includes several mechanisms such as MIMO 40 MHz channels packet aggregation and block acknowledgement which significantly increase the amount of bandwidth available for user applications With throughput rates up to 300 Mbps this represents a greater than five fold increase over the performance of 802 11a g networks Better and reliable coverage MIMO technology uses multiple antennas at both the transmitter and receiver to transmit multiple spatial streams The multiple transmit streams which take different routes in reflecting environments are combined at the receiver using MIMO techniques The end result is a two fold increase in throughput and improved wireless coverage due to lesser deadspots More security LANCOM sets the standards in WLAN security A comprehensive range of security technologies is supported in wireless LAN including IEEE 802 11i 802 1X WPA WPA2 WEP64 128 152 access control lists or LEPS LANCOM Enhanced Passphrase Security which enables the configuration of an optimized solution whatever the individual requirements
2. LANCOM ES 1108P 8 port Fast Ethernet switch with 4 PoE ports item no 61450 EU and 61449 UK LANCOM ES 2126P 24 port Fast Ethernet PoE switch IEEE 802 3af max 185 W 2 Gigabit ports 2 SFP slots item no 61468 EU Note Item number s LANCOM L 322agn dual Wireless EU The Polarization Diversity antennas require 2 cables and surge arrestors LANCOM L 322agn dual Wireless US LANCOM L 322agn dual Wireless UK 61534 LANCOM L 322agn dual Wireless 10 piece bulk 61571 Note The US version must be operated with the provided antennas www lancom eu LANCOM Systems LANCOM Systems GmbH Adenauerstr 20 B2 52146 Wuerselen Germany E Mail info lancom eu Internet www lancom eu LANCOM LANCOM Systems and LCOS are registered trademarks All other names or descriptions used may be trademarks or registered trademarks of their owners Subject to change without notice No liability for technical errors and or omissions 7 2014
3. LCOS 9 00 gt REL D irLancer Extender I 180 omnidirectional 2 4 GHz indoor antenna item no 60914 AirLancer Extender I D180agn dual band indoor antenna item no 60917 External antenna AirLancer Extender O D9a 5 GHz dual linear polarisation diversity outdoor antenna item no 61224 Antenna cable Antenna cable AirLancer cable NJ NP 3m antenna cable extension for connection with LANCOM outdoor antennas item no 61230 Ai rLancer cable NJ NP 6m antenna cable extension for connection with LANCOM outdoor antennas item no 61231 Antenna cable AirLancer cable NJ NP 9m antenna cable extension for connection with LANCOM outdoor antennas item no 61232 Surge arrestor antenna cable AirLancer Extender SA 5L surge arrestor 2 4 and 5 GHz to be integrated between Access Point and antenna item no 61553 Surge arrestor LAN cable AirLancer Extender SA LAN surge arrestor LAN cable item no 61213 LANCOM Wall Mount For simple theft proof mounting of LANCOM devices with plastic housings item no 61349 LANCOM Wall Mount White For simple theft proof mounting of LANCOM devices with plastic housings item no 61345 Analog modem backup serial adapter LANCOM Serial Adapter Kit item no 61500 Power over Ethernet Injector LANCOM PoE Power Injector item no 61502 EU and 61503 UK Power over Ethernet Switch Power over Ethernet Switch
4. 9 600 115 000 baud suitable for optional connection of analog GPRS modems Supports internal COM port server and allows for transparent asynchronous transmission of serial data via TCP External antenna connectors LCMS LANCOM Management System LANconfig LANmonitor Four reverse SMA connectors for external LANCOM AirLancer Extender antennas or for antennas from other vendors Please respect the restrictions which apply in your country when setting up an antenna system For information about calculating the correct antenna setup please refer to www lancom systems eu Configuration program for Microsoft Windows incl convenient Setup Wizards Optional group configuration simultaneous remote configuration and management of multiple devices over IP connection HTTPS HTTP SSH TFTP A tree view of the setting pages like in WEBconfig provides quick access to all settings in the configuration window Password fields which optionally display the password in plain text and can generate complex passwords Configuration program properties per project or user Automatic storage of the current configuration before firmware updates Exchange of configuration files between similar devices e g for migrating existing configurations to new LANCOM products Detection and display of the LANCOM managed switches Extensive application help for LANconfig and parameter help for device configuration LANCOM QuickFinder as search filter within LANconfig an
5. by the administrator Display and saving of internal SYSLOG buffer events from LANCOM devices with LANmonitor display only with WEBconfig Access rights User administration Individual access and function rights for up to 16 administrators Alternative access control on a per parameter basis with TACACS RADIUS user administration for dial in access PPP PPTP Support for RADSEC Secure RADIUS providing secure communication with RADIUS servers Remote maintenance Remote configuration with Telnet SSL SSH with password or public key browser HTTP HTTPS TFTP or SNMP firmware upload via HTTP HTTPS or TFTP LANCOM L 322agn dual Wireless Management Features as of LCOS 9 00 gt REL D Support of TACACS protocol for authentication authorization and accounting AAA with reliable connections and encrypted payload Authentication and authorization are separated completely LANCOM access rights are converted to TACACS levels With TACACS access can be granted per parameter path command or functionality for LANconfig WEBconfig or Telnet SSH Each access and all changes of configuration are logged Access verification and logging of SNMP Get and Set requests WEBconfig supports the access rights of TACACS and choice of TACACS server at login LANconfig provides a device login with the TACACS request conveyed by the addressed device Authorization to execute scripts and each command within them by checking t
6. consumption of access point and power supply adapter approx 14 4 Watts via PoE EN 60950 1 EN 301 489 1 EN 301 489 17 FCC FCC Part 15 Class B with FTP cabling FCC Part 15 247 15 407 Wi Fi Alliance Certification 2 4 GHz WLAN EN 300 328 Wi Fi Certified LANCOM L 322agn dual Wireless Declarations of conformity Features as of LCOS 9 00 gt REL D 5 GHz WLAN EN 301 893 EN 302 502 Medical Medical conformity with EN 60601 1 2 Notifications Certifications notified in Germany Belgium Netherlands Luxembourg Austria Switzerland UK Italy Spain France Portugal Czech Republic Denmark IPv6 IPv6 Ready Gold Note You will find all declarations of conformity in the products section of our website at www lancom systems eu Note Scope of delivery US model only Manual Installation Guide DE EN FR ES IT PT NL CD DVD Data medium with management software LANconfig LANmonitor WLANmonitor LANCAPI and documentation Cable 1 Ethernet cable 3 m aana Antennas Four 4 5 dBi dipole antennas Gain depends on frequency Power supply unit External power adapter 230 V NEST 12 V 1 5 A DC S coaxial power connector 2 1 5 5 mm bayonet temperature range from 5 to 45 C LANCOM item no 110723 EU LANCOM item no 110829 UK not included in bulk delivery Power supply unit Warranty 12 V DC external power adapter 230 V 110 V US version with bayonet cap
7. of static multicast group members per VLAN ID Configuration of query simulation for multicast membership per VLAN ID Protected Management Frames Protection of WLAN Management Frames based on the standard IEEE 802 11w against man in the middle attacks by using Message Ingegrity Codes MIC Security IEEE 802 11i WPA2 with passphrase WPA2 Personal or IEEE 802 1X WPA2 Enterprise and hardware accelerated AES closed network WEP64 WEP128 WEP152 user authentication IEEE 802 1x EAP LEPS WPA1 TKIP EAP Types EAP TLS EAP TTLS MSCHAPv2 PEAPvO EAP MSCHAPv2 PEAPv1 EAP GTC EAP SIM EAP AKA EAP AKA Prime EAP FAST RADIUS server Integrated RADIUS server for MAC address list management EAP server Integrated EAP server for authentication of IEEE 802 1X clients via EAP TLS EAP TTLS PEAP MSCHAP or MSCHAPv2 LANCOM L 322agn dual Wireless RADIUS Accounting per SSID Quality of Service Features as of LCOS 9 00 gt REL D A RADIUS server can be set for each individual SSID Prioritization according to Wireless Multimedia Extensions WME subset of IEEE 802 1 1 U APSD WMM Power Save Extension of power saving according to IEEE 802 11e by Unscheduled Automatic Power Save Delivery equivalent to WMM Power Save U APSD supports the automatic switch of clients to a doze mode Increasmed battery lifetime for telephone calls over VoWLAN Voice over WLAN bandwidth limitation per WLAN client M
8. opt up to 100 LANCOM access points and WLAN routers item no 61378 item no Art Nr 61379 and item no 61384 US LANCOM WLAN controller for central management of 25 opt up to 100 LANCOM access points and WLAN routers item no 61550 EU and item no 61551 UK only stock devices article is no longer available LANCOM WLC 4100 EU UK LANCOM WLAN controller for central management of 100 opt up to 1000 LANCOM access points and WLAN routers item no 61369 EU and item no 61377 UK External antenna External antenna AirLancer Extender 0 30 2 4 GHz outdoor antenna item no 60478 AirLancer Extender 0 70 2 4 GHz outdoor antenna item no 60469 External antenna AirLancer Extender O 9a 5 GHz outdoor antenna item no 61220 External antenna AirLancer Extender O 18a 5 GHz outdoor antenna item no 61210 External antenna AirLancer Extender O D80g 2 4 GHz dual linear polarisation diversity outdoor sector antenna item no 61221 External antenna AirLancer Extender O D60a 5 GHz dual linear polarisation diversity outdoor sector antenna item no 61222 External antenna AirLancer Extender 0 360ag dual band omnidirectional outdoor antenna item no 61223 External antenna AirLancer Extender l 60ag dual band indoor sector antenna item no 61214 LANCOM L 322agn dual Wireless Accessories External antenna External antenna Features as of
9. up to 20 Maximal Ratio Combining MRC Maximal Ratio Combining MRC enables the receiver access point in combination with multiple antennas to optimally combine MIMO signals to improve the client reception at long range Short Guard Interval The guard interval is the time between OFDM symbols in the air IEEE 802 11n gives the option for a shorter 400 nsec guard interval compared to the legacy 800 nsec guard interval Under ideal RF conditions this increases the throughput by upto 10 LANCOM L 322agn dual Wireless IEEE 802 11n Features Features as of LCOS 9 00 gt REL D Support for Broadband Fixed Wireless Access in 5 8 GHz band with up to 4 Watts EIRP for WLAN point to point links according to the national regulations of your country special antennas required WLAN operating modes The use of BFWA is subject to country specific regulation Stateful inspection firewall WLAN access point Infrastructure mode autonomous operation or managed by LANCOM WLAN controller WLAN bridge Point to multipoint connection of up to 16 Ethernet LANs mixed operation optional broken link detection blind mode supports VLAN When configuring Pt to Pt links pre configured names can be used as an alternative to MAC Adresses for creating a link Rapid spanning tree protocol to support redundant routes in Ethernet networks WLAN router Use of the LAN connector for simultaneous DSL over LAN IP router NAT
10. Actions Forward drop reject block sender address close destination port disconnect Notification Quality of Service Bandwidth reservation DiffServ TOS Traffic shaping Dynamic bandwidth management with IP traffic shaping Via e mail SYSLOG or SNMP trap Dynamic reservation of minimum and maximum bandwidths totally or connection based separate settings for send and receive directions Setting relative bandwidth limits for QoS in percent Priority queuing of packets based on DiffServ TOS fields Packet size control Automatic packet size control by fragmentation or Path Maximum Transmission Unit PMTU adjustment Layer 2 Layer 3 tagging Intrusion Prevention Automatic or fixed translation of layer 2 priority information IEEE 802 11p marked Ethernet frames to layer 3 DiffServ attributes in routing mode Translation from layer 3 to layer 2 with automatic recognition of IEEE 802 11p support in the destination device Monitoring and blocking of login attempts and port scans IP spoofing ae Access control lists Source IP address check on all interfaces only IP addresses belonging to the defined IP networks are allowed Filtering of IP or MAC addresses and preset protocols for configuration access Denial of Service protection Protection from fragmentation errors and SYN flooding General URL blocker Detailed settings for handling reassembly PING stealth mode and AUTH port Filtering of
11. EEE 802 11u Hotspot 2 0 allows for a seamless transition from the cellular network into WLAN hotspots Authentication methods using SIM card information certificates or username and password enable an automatic encrypted login to WLAN hotspots without the need to manually enter login credentials Auto WDS Auto WDS allows wireless integration of access points in existing WLAN infrastructure including managment via WLAN controller Note The effective distances and transmission rates that can be achieved are depending of the site RF conditions Note Only in installations with WLAN controller LANCOM Active Radio Control WLAN clients are directed actively to the best available access point to provide the best overall load balancing and the highest possible bandwidth for each client Client Steering can be based on client number frequency band and signal strength Band Steering Steering of WLAN clients towards the 5 GHz frequency band by restricting the access to the 2 4 GHz band RF Optimization Automatic selection of optimal WLAN channels Due to reduced channel overlaps WLAN clients benefit from an improved data throughput In controller based installations an automatic selection of optimal channels is conducted for all managed access points Adaptive Noise Immunity By using adaptive noise immunity an access point can cut out sources of interferences in the radio field and focusses on clients with a sufficent sign
12. For example Multi SSID allows the definition of up to 8 user groups each with its own level of security More management LANCOM s WLAN management tools offer real benefits to network administrators for the installation control and monitoring of access points LANCOM WLAN Controller has built in support for the L 3xx access point LANCOM s Smart Controller architecture is specifically designed to support high bandwidth applications by providing flexible data plane switching options As a result higher bandwidth applications can directly offloaded at the access point and reduces the overall cost involved in expensive network upgrades required in centralized architectures WLANmonitor visualizes the devices connected to WLAN irrespective of physical location and facilitates the central surveillance of the entire wireless network More reliability for the future From the very start LANCOM products are designed for a product life of several years They are equipped with hardware dimensioned for the future Even reaching back to older product generations updates to the LANCOM Operating System LCOS are available several times a year free of charge and offering major features LANCOM offers unbeatable protection of your investment LANCOM L 322agn dual Wireless Frequency band 2 4 GHz and 5 GHz Features as of LCOS 9 00 gt REL D 2400 2483 5 MHz ISM and 5150 5825 MHz depending on country specific restrictions Frequency ban
13. LANCOM router Also usable when working with SSH to login to the LANCOM device Support for certificate and password based authentication Generates its own key with sshkeygen SSH client functions are restricted to administrators with appropriate rights Telnet client function to login administer third party devices or other LANCOM devices from command line interface HTTPS Server Security Option to choose if an uploaded certificate or the default certificate is used by the HTTPS server Access rights read write over WAN or W LAN can be set up separately Telnet SSL SSH SNMP HTTPS HTTP access control list Scripting Load commands Scripting function for batch programming of all command line parameters and for transferring partial configurations irrespective of software versions and device types incl test mode for parameter changes Utilization of timed control CRON or connection establishment and termination to run scripts for automation Scripts can send e mails with various command line outputs as attachments LoadFirmware LoadConfig and LoadScript can be executed conditionally in case certain requirements are met For example the command LoadFirmware could be executed on a daily basis and check each time if the current firmware is up to date or if a new version is available In addition LoadFile allows the upload of files including certificates and secured PKCS 12 containers SNMP Timed control LANCOM
14. Reverse NAT IP masquerading DHCP server DHCP client DHCP relay server DNS server PPPoE client incl Multi PPPoE PPTP client and server NetBIOS proxy DynDNS client NTP port mapping policy based routing based on routing tags tagging based on firewall rules dynamic routing with RIPv2 VRRP WLAN client Transparent WLAN client mode for wireless Ethernet extensions e g connecting PCs or printers by Ethernet up to 64 MAC addresses Automatic selection of a WLAN profile max 8 with individual access parameters depending on signal strength or priority Incoming Outgoing Traffic inspection based on connection information Trigger for firewall rules depending on backup status e g simplified rule sets for low bandwidth backup lines Limitation of the number of sessions per remote site ID Packet filter Check based on the header information of an IP packet IP or MAC source destination addresses source destination ports DiffServ attribute remote site dependant direction dependant bandwidth dependant Extended port forwarding N N IP address mapping Network Address Translation NAT based on protocol and WAN address i e to make internal webservers accessible from WAN N N IP address mapping for translation of IP addresses or entire networks Tagging The firewall marks packets with routing tags e g for policy based routing Source routing tags for the creation of independent firewall rules for different ARF contexts
15. WLAN controller Statistics Statistics Accounting SNMP management via SNMPv2 new unified private MIB for all most current and future LANCOM devices with LCOS Download link in WEBconfig Scheduled control of parameters and actions with CRON service Extensive LOG and TRACE options PING and TRACEROUTE for checking connections LANmonitor status display internal logging buffer for SYSLOG and firewall events Supported by all LANCOM WLAN controller separate optional hardware equipment for installation optimization operating and monitoring of WLAN networks except for P2P connections Extensive Ethernet IP and DNS statistics SYSLOG error counter Connection time online time transfer volumes per station Snapshot function for regular read out of values at the end of a billing period Timed CRON command to reset all counters at once Accounting information exportable via LANmonitor and SYSLOG Hardware Power supply 12 V DC external power adapter 230 V 110 V US version with bayonet cap to protect against accidentally unplugging Power supply Via Power over Ethernet compliant with IEEE 802 3af Environment Temperature range 0 45 C humidity 0 95 non condensing Robust synthetic housing rear connectors ready for wall mounting Kensington lock 210 x 45 x 140 mm W x H x D Power consumption max Declarations of conformity approx 10 7 Watts with 12 V 1 A power supply adapter total power
16. al strength Therefore WLAN clients profit by having a higher data throughput available due to less interferences Spectral Scan By scanning the entire RF spectrum interferences in the WLAN can be identified and graphically illustrated Up to 13 channels 2 4 GHz or up to 26 channels 5 GHz depending on national regulations and manual configuration Illustration of signal strength on individual WLAN channels at a certain point of time Note Only in installations with WLAN controller Note MIMO 40 MHz Channels IEEE 802 11n Features the throughput Steering of WLAN clients is not available in US version MIMO technology is a technique which uses multiple transmitters to deliver multiple data streams via different spatial channels Depending on the existing RF conditions the throughput is multiplied with MIMO technology Two adjacent 20 MHz channels are combined to create a single 40 MHz channel Depending on the existing RF Conditions channel bonding doubles 20 40MHz Coexistence Mechanisms in the 2 4GHz Band Support of coexisting accesspoints with 20 and 40MHz channels in 2 4GHz band MAC Aggregation and Block Acknowledgement MAC Aggregation increase the IEEE 802 11 MAC efficiency by combining MAC data frames and sending it out with a single header The receiver acknowledges the combined MAC frame with a Block Acknowledgement Depending on existing RF conditions this technique improves throughput by
17. aximum transmit and receive bandwith and an individual VLAN ID can be assigned to each WLAN client MAC address bandwidth limitation per SSID Maximum transmit and receive bandwith can be assigned to each SSID Broken link detection If the link of a chosen LAN interface breaks down a WLAN module can be deactivated to let the associated clients search for a new base station Background scanning Client detection Detection of rogue AP s and the channel information for all WLAN channels during normal AP operation The Background Scan Time Interval defines the time slots in which an AP or Router searches for a foreign WLAN network in its vicinity The time interval can be specified in either milliseconds seconds minutes hours or days Rogue WLAN client detection based on probe requests IEEE 802 1X supplicant Authentication of an access point in WLAN client mode at another access point via IEEE 802 1X EAP TLS EAP TTLS and PEAP Layer 3 Tunneling Layer 3 Tunneling in conformity with the CAPWAP standard allows the bridging of WLANs per SSID to a separate IP subnet Layer 2 packets are encapsulated in Layer 3 tunnels and transported to a LANCOM WLAN controller By doing this the access point is independent of the present infrastructure of the network Possible applications are roaming without changing the IP address and compounding SSIDs without using VLANs Client Steering IEEE 802 11u The WLAN standard I
18. d 2 4 GHz and 5 GHz US model 2400 2483 5 MHz ISM World Mode and 5150 5250 or 5725 5825 MHz Data rates IEEE 802 11n Module 1 300 Mbps according to IEEE 802 11n with MCS15 Fallback to 6 5 Mbps with MCSO Data rates IEEE 802 11n Module 2 300 Mbps according to IEEE 802 11n with MCS15 Fallback to 6 5 Mbps with MCSO Data rates IEEE 802 11a h 54 Mbps fallback to 48 36 24 18 12 9 6 Mbps Automatic Rate Selection fully compatible with TPC adjustable power output and DFS automatic channel selection radar detection according to EN 301 893 and EN 302 502 Range IEEE 802 1 1a b g Up to 150 m up to 30 m in buildings Range IEEE 802 11n Up to 250 m 6 5 Mbps up to 20 m 300 Mbps indoor Output power at radio module 2 4 GHz IEEE 802 11b 14dBm 1 2 5 5 and 11 Mbps IEEE 802 11g 17dBm 6 up to 36 Mbps 16dBm 48 and 54 Mbps IEEE 802 11n 16dBm 6 5 13 Mbps MCS0 8 20 MHz 15 dBm 65 130 Mbps MCS7 15 20 MHz 15 dBm 15 30 Mbps MCS0 8 40 MHz 14 dBm 150 300 Mbps MCS7 15 40 MHz Output power at radio module 5 GHz IEEE 802 11a h 15 dBm 6 up to 36 Mbps 14 dBm 48 Mbps 12 dBm 54 Mbps IEEE 802 11n 15 dBm 6 5 13 Mbps MCS0 8 20 MHz 7 up to 10 dBm 65 130 Mbps MCS7 15 20 MHz 14 dBm 15 30 Mbps MCSO0 8 40 MHz 6 up to 9 dBm 150 300 Mbps MCS7 15 40 MHz Max radiated power EIRP 2 4 GHz band IEEE 802 11b g Up to 20 dBm 100 mW EIRP transm
19. d device configurations that reduces the view to devices with matching properties Central configuration of each management port Monitoring application for Microsoft Windows for remote surveillance and logging of the status of LANCOM devices and connections incl PING diagnosis and TRACE with filters and save to file Search function within TRACE tasks Wizards for standard diagnostics Export of diagnostic files for support purposes including bootlog sysinfo and device configuration without passwords Graphic display of key values marked with an icon in LANmonitor view over time as well as table for minimum maximum and average in a separate window e g for Rx Tx CPU load free memory Monitoring of the LANCOM managed switches Flick easily through different search results by LANCOM QuickFinder WLANmonitor Monitoring application for Microsoft Windows for the visualization and monitoring of LANCOM WLAN installations incl Rogue AP and Rogue Client visualization LANCOM QuickFinder as search filter that reduces the view to devices with matching properties Firewall GUI Graphical user interface for configuring the object oriented firewall in LANconfig Tabular presentation with symbols for rapid understanding of objects choice of symbols for objects objects for actions Quality of Service remote sites services default objects for common scenarios individual object definition e g for user groups Automatic software update Volu
20. ent DHCPv6 server DHCPv6 relay stateless and stateful mode IPv6 address IA_NA prefix delegation IA_PD DHCPv6 reconfigure server and client Layer 2 functions LLDP Automatic discovery of network topology in layer 2 networks Link Layer Discover Protocol ARP lookup Packets sent in response to LCOS service requests e g for Telnet SSH SNTP SMTP HTTP S SNMP etc via Ethernet can be routed directly to the requesting station default or to a target determined by ARP lookup DHCP option 82 DHCP relay agent information option 82 can be insterted on devices with WLAN bridge RFC 3046 IPv6 layer 2 protocol filter Router advertisement snopping blocks illegal IPv6 router advertisements in the WLAN bridge DHCPv6 snopping blocks all illegal DHCPv6 servers The lightweight DHCPv6 relay agent LDRA can insert relay agent information on layer 2 COM port server COM port forwarding COM port server for the DIN interface For a serial device connected to it the server manages its own virtual COM port via Telnet RFC 2217 for remote maintenance works with popular virtual COM port drivers compliant with RFC 2217 Switchable newline conversion and alternative binary mode TCP keepalive according to RFC 1122 with configurable keepalive interval retransmission timeout and retries LAN protocols Rapid Spanning Tree IEEE 802 1d Spanning Tree and IEEE 802 1w Rapid Spanning Tree support for dynamic path selection with redundant lay
21. er 2 connections IPv6 NDP stateless address autoconfiguration SLAAC stateful address autoconfiguration with DHCPv6 router advertisements ICMPv6 DHCPv6 DNS HTTP HTTPS PPPoE RADIUS TCP UDP SMTP IPv6 Dual Stack IPv4 IPv6 dual stack ARP proxy ARP BOOTP DHCP DNS HTTP HTTPS IP ICMP NTP SNTP NetBIOS PPPoE server RADIUS RIP 1 RIP 2 RTP SIP SNMP TCP TFTP UDP VRRP VLAN IPv6 compatible LCOS applications WEBconfig HTTP HTTPS SSH Telnet DNS TFTP Firewall RAS dial in WAN protocols PPPoE Multi PPPoE ML PPP PPTP PAC or PNS L2TPv2 LAC or LNS and IPoE with or without DHCP RIP 1 RIP 2 VLAN IP IPv6 IPv6 over PPP IPv6 and IPv4 IPv6 dual stack session IPoE autoconfiguration DHCPv6 or static Tunneling protocols IPv4 1Pv6 6to4 6in4 6rd static and via DHCP Dual Stack Lite IPv4 in IPv6 tunnel LANCOM L 322agn dual Wireless Features as of LCOS 9 00 gt REL D WAN operating mode xDSL ext modem Interfaces ADSL1 ADSL2 or ADSL2 with external ADSL2 modem 10 100 1000 Base TX autosensing auto node hub PoE compliant with IEEE 802 3af 2nd LAN port ETH2 DSL over LAN DSLoL 10 100Base TX autosensing auto node hub PoE compliant with IEEE 802 3af One LAN port can even parallel to LAN mode be used as a WAN port for connecting external DSL modems PPPoE or external routers Serial interface Serial configuration interface COM port 8 pin Mini DIN
22. he TACACS server s database CRON action table and script processing can be diverted to avoid TACACS to relieve TACACS servers Redundancy by setting several alternative TACACS servers Configurable option to fall back to local user accounts in case of connection drops to the TACACS servers Compatibility mode to support several free TACACS implementations RADIUS Remote maintenance of 3rd party devices Support of RADIUS protocol for authentication of configuration access Administrative privileges can be assigned for each administrator A remote configuration for devices behind der LANCOM can be accomplished after authentication via tunneling of arbitrary TCP based protocols e g for HTTP S remote maintenance of VoIP phones or printers of the LAN Additionally SSH and Telnet client allow to access other devices from a LANCOM device with an interface to the target subnet if the LANCOM device can be reached at its command line interface TFTP amp HTTP S client SSH amp Telnet client For downloading firmware and configuration files from a TFTP HTTP or HTTPS server with variable file names wildcards for name MAC IP address serial number e g for roll out management Commands for live Telnet session scripts or CRON jobs HTTPS Client authentication possible by username and password or by certificate SSH client function compatible to Open SSH under Linux and Unix operating systems for accessing third party components from a
23. ission power control according to TPC Max radiated power EIRP 5 GHz band IEEE 802 11a h Up to 30 dBm 1000 mW or up to 36 dBm 4000 mW EIRP depending on national regulations on channel usage and subject to further obligations such as TPC and DFS Minimum transmission power Transmission power reduction in software in 1 dB steps to min 0 5 dBm Receiver sensitivity 2 4 GHz IEEE 802 11b 98 dBm 1 Mbps 94 dBm 11 Mbps IEEE 802 119 96 dBm 6 Mbps 82 dBm 54 Mbps IEEE 802 11n 95 dBm 6 5 Mbps MCSO 20 MHz 78 dBm 65 Mbps MCS 7 20 MHz 92 dBm 15 Mbps MCSO 40 MHz 75 dBm 150 Mbps MCS7 40 MHz Receiver sensitivity 5 GHz Radio channels 2 4 GHz IEEE 802 1 1a h 98 dBm 6 Mbps 81 dBm 54 Mbps IEEE 802 11n 94 dBm 6 5 Mbps MCSO 20 MHz 76dBm 65 Mbps MCS 7 20 MHz 92 dBm 15 Mbps MCSO 40 MHz 72 dBm 150 Mbps MCS7 40 MHz Up to 13 channels max 3 non overlapping depending on country specific restrictions Radio channels 5 GHz Up to 26 non overlapping channels available channels and further obligations such as automatic DFS dynamic channel selection depending on national regulations Roaming Seamless handover between radio cells IAPP support with optional restriction to an ARF context IEEE 802 11d support Opportunistic Key Caching Opportunistic key caching allows fast roaming processes between access points WLAN installations utilizing a WLAN contr
24. ntary automatic updates for LCMS Search online for LCOS updates for devices managed by LANconfig on the myLANCOM download server myLANCOM account mandatory Updates can be applied directly after the download or at a later time Management WEBconfig Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP Similar to LANconfig with a system overview SYSLOG and events display symbols in the menu tree quick access with side tabs WEBconfig also features Wizards for basic configuration security Internet access LAN LAN coupling Online help for parameters in LCOS menu tree LANCOM Layer 2 Management emergency management The LANCOM Layer 2 Management protocol LL2M enables an encrypted access between the command line interfaces of two LANCOM device directly via a Layer 2 connection Alternative boot configuration Device SYSLOG During rollout devices can be preset with project or customer specific settings Up to two boot and reset persistent memory spaces can store customized configurations for customer specific standard settings memory space 1 or as a rollout configuration memory space 2 A further option is the storage of a persistent standard certificate for the authentication of connections during rollouts SYSLOG buffer in the RAM size depending on device memory to store events for diagnosis Default set of rules for the event protocol in SYSLOG The rules can be modified
25. oller and IEEE 802 1X authentication cache the access keys of the clients and are transmitted by the WLAN controller to all mananged access points Fast roaming Based on IEEE 802 11r allows fast roaming procedures between access points This is possible by using IEEE 802 1X authentication or pre shared keys in controller based WLAN installations which save the access keys temporarily and distribute them to the managed access points Concurrent WLAN clients Fast client roaming Up to 65 clients recommended 512 clients max With background scanning moving LANCOM client mode access points pre authenticate to alternative access points which offer a better signal before Roaming fails VLAN VLAN ID definable per interface WLAN SSID point to point connection and routing context 4094 IDs IEEE 802 1q Dynamic VLAN assignment Dynamic VLAN assignment for target user groups based on MAC addresses BSSID or SSID by means of external RADIUS server Q in Q tagging Support of layered IEEE 802 1q VLANs double tagging Multi SSID Simultaneous use of up to 8 independent WLAN networks per WLAN interface IGMP snooping Support for Internet Group Management Protocol IGMP in the WLAN bridge for WLAN SSIDs and LAN interfaces for specific switching of multicast packets devices with integrated WLAN only Automated detection of multicast groups Configurable action for multicast packets without registration Configuration
26. s Router IP and NetBIOS IP multi protocol router Advanced Routing and Forwarding Separate processing of 16 contexts due to virtualization of the routers Mapping to VLANs and complete independent management and configuration of IP networks in the device i e individual settings for DHCP DNS Firewalling QoS VLAN Routing etc Automatic learning of routing tags for ARF contexts from the routing table HTTP HTTP and HTTPS server for configuration by web interface DNS client DNS server DNS relay DNS proxy and dynamic DNS client DNS DHCP DHCP client DHCP relay and DHCP server with autodetection Cluster of several LANCOM DHCP servers per context ARF network enables caching of all DNS assignments at each router DHCP forwarding to multiple redundant DHCP servers NetBIOS NetBIOS IP proxy NTP NTP client and SNTP server automatic adjustment for daylight saving time Policy based routing Policy based routing based on routing tags Based on firewall rules certain data types are marked for specific routing e g to particular remote sites or lines Dynamic routing Dynamic routing with RIPv2 Learning and propagating routes separate settings for LAN and WAN Extended RIPv2 including HopCount Output Delay Poisoned Reverse Triggered Update for LAN acc to RFC 2453 and WAN acc to RFC 2091 as well as filter options for propagation of routes Definition of RIP sources with wildcards DHCPv6 DHCPv6 cli
27. to protect against accidentally unplugging 3 years support via hotline and Internet KnowledgeBase Software updates Advance Replacement Warranty Extension Public Spot Accessories LANCOM Large Scale Monitor LANCOM WLC 4006 EU UK US LANCOM WLC 4006 EU UK LANCOM WLC 4025 EU UK US LANCOM WLC 4025 EU UK Regular free updates LCOS operating system and LANCOM Management System via Internet LANCOM Next Business Day Service Extension CPE item no 61411 LANCOM 2 Year Warranty Extension CPE item no 61414 LANCOM Public Spot Option authentication and accounting software for hotspots incl Voucher printing through Standard PC printer item no 60642 Powerful monitoring system for WLAN VPN and LAN infrastructures of mid sized to large networks upgradable for up to 1000 monitored devices for a proactive error management browser based remote monitoring intuitive user interface graphic floorplans configurable triggers for alarms and messages users roles and rights management item no 62910 LANCOM WLAN controller for central management of 6 opt up to 30 LANCOM access points and WLAN routers item no 62035 EU item no 62036 UK and item no 62037 US LANCOM WLAN controller for central management of 6 or 12 LANCOM access points and WLAN routers item no 61367 EU and item no 61368 UK only stock devices article is no longer available LANCOM WLAN controller for central management of 25
28. unwanted URLs based on DNS hitlists and wildcard filters Password protection Password protected configuration access can be set for each interface Alerts Alerts via e mail SNMP Traps and SYSLOG Authentication mechanisms WLAN protocol filters Adjustable reset button IP redirect EAP TLS EAP TTLS PEAP MS CHAP MS CHAPv2 as EAP authentication mechanisms PAP CHAP MS CHAP and MS CHAPv2 as PPP authentication mechanisms Limitation of the allowed transfer protocols source and target addresses on the WLAN interface Adjustable reset button for ignore boot only and reset or boot Fixed redirection of any packet received over the WLAN interface to a dedicated target address LANCOM L 322agn dual Wireless Features as of LCOS 9 00 gt REL D High availability redundancy VRRP VRRP Virtual Router Redundancy Protocol for backup in case of failure of a device or remote station Enables passive standby groups or reciprocal backup between multiple active devices including load balancing and user definable backup priorities FirmSafe For completely safe software upgrades thanks to two stored firmware versions incl test mode for firmware updates Analog GSM modem backup Optional operation of an analog or GSM modem at the serial interface Line monitoring Line monitoring with LCP echo monitoring up to 4 addresses for end to end monitoring with ICMP polling Routing function

Download Pdf Manuals

image

Related Search

Related Contents

  【取扱説明書】    DETECTOR  the Gopher 4 User Manual  MANUAL DE INSTALAÇÃO DO CERTIFICADO DIGITAL A3  STB firmware v1.4 - user manual  Blaupunkt BD-320  Philips Xenium CTX121BLK  多目的カメラ ME20F-SHカタログ  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.