Cygnett CY-A-GBA docking speaker
Contents
1. Warranty Cygnett 12 Month Manufacturers Warranty Register online at www cygnett com to activate your warranty GrooveBasSe a Powerful full featured speakers for your iPod OPERATING INSTRUCTIONS User Guide Getting started Specifications m Output Power 36W Built in 2 x 4 Bass driver and 2 x 1 Tweeter m AM FM alarm clock radio m Choose from different alarm modes to wake up to iPod FM Radio AM Radio or pre set chimes m Full function remote control m Charges syncs and plays your iPod at the same time m Battery or AC powered m Treble Bass option m AV S Video outputs m AC adapter included Caution Congratulations on the purchase of your new iPod Clock Radio Speaker System To get the most from your new speaker system please take a few minutes to read the following instructions and familiarize yourself with the operation of the unit Before setting up the unit check that the following items are contained within the box 1 iPod speaker system 2 AC DC power adaptor 3 Remote control handset 4 Adaptor cartridges for iPod 5 3 5mm stereo jack connector cable for auxiliary input 6 USB connection cable Adaptor cartridges are subject to change 1 Plug the AC DC adaptor into a mains power outlet 2 Press the POWER button A1 3 Ifyou require your iPod to synchronize with your PC s iTunes library plug the USB connection cable into the USB connection2. port B4 4 Slot the appropriate iPod adaptor cartridge into the iPod dock 5 Place your iPod into the iPod dock Your iPod will begin to charge if not fully charged and synchronize with your computer if connected via USB Observe electrical safety at all times Do not allow the system to come into contact with water Do not operate the system with wet or damp hands When not in use disconnect the AC DC power adaptor from the mains supply Only use the AC DC power adaptor supplied with the system This system contains no user serviceable parts Do not attempt to modify the unit in any way The system uses delicate electronic components Avoid strong impacts or dropping any part of the system Avoid placing the system adjacent to a CRT TV set Alarm and Al mode setting 1 Make sure the GrooveBase is switched off in standby mode You will know its in standby mode because the Blue LEDs under the buttons are off 2 Plug your ipod into the top of the GrooveBase 3 Push the FUNCTION button to select the icon of your desired mode iPod Radio Clock Sound on the top right of the display at the front of the GrooveBase 4 Turn the GrooveBase On by pushing the POWER button top left button The Blue LEDs under the buttons will come on You are now ready to set the Alarm Time 5 Push the ALARM button The Hour digit will flash 6 Push the UP DOWN buttons to set the hour for the alarm to come on Note if
3. 3 Radio To select the desired audio source select the FUNCTION button repeatedly The audio input will cycle between different sources in the following order iPod Aux gt Radio LCD display will show iPod p AUX Radio The speaker system can output audio and video outputs to other audio visual equipment via the following connections 1 To a TV or video display via the composite video RCA output This feature is only available on iPods able to output a video signal Use an RCA to RCA cable not supplied Take two covers off at the bottom of the speaker Put 12 size C 1 5V batteries into the speaker as an alternative power source
4. o Display will show the frequency selected Pressing the TIME and ALARM button and cycling through the Time and Alarm Setting mode will display the time in any mode AL MODE Press the AL MODE button display will show IPOD RADIO orga whichever is selected Sleep Display will show Sleep In Standby Mode the speaker will display the time A Speaker Unit front A1 Power As5 Down A2 Alarm A6 Up A3 Time A6 Volume A4 Function A7 Volume Selecting different audio sources B Speaker Unit rear B1 Video out B2 DC in18V B3 Aux B4 USB B5 FM B6 AM C Remote Control STANDBY Power On Off MUTE Mute O TIME Time Setting Sy mi ALMODE Set Alarm Clock Mode time almode alarm ALARM To Set Alarm Time and Alarm On Off TRE BASS Treble Bass Adjustment SLEEP Timer 15 30 45 60 75 90 120 FUNCTION Select Audio Source tre bass sleep function menu memory enter MENU MENU Function snooze MEMORY Radio Channel Auto Search and Save volume volume ENTER Go to function you choose SNOOZE Snooze VOL To turn the volume down VOL To turn the volume Up A Up Vv Down 4a Prev gt gt Next Play pause Connecting to auxiliary equipment The speaker system can select between the follow audio sources 1 iPod audio output only if an iPod is connected via the iPod dock 2 Auxilliary stereo audio input via 3 5mm jack connection at rear of unit
5. own either the UP or DOWN button for approximately 1 second 4 To increase decrease the frequency by 0 1MHz o 1kHz press and release the UP DOWN button 5 Press the MEMORY button to Auto search the channel and save them the unit will return to 1 channel after finish search press a and W to choose the saved channel When listening to your ipod or the radio press the sleep button to enter sleep mode the unit will automatically turn off after the selected time 15 30 45 60 75 90 120 Snooze Operation Press the snooze button on the unit after the alarm sounds the alarm will go off and will come on again in approx 9 minutes Entering the Time and Alarm button to set the Daily Time Alarm time 1 Press the TIME button for 3 seconds The HOUR setting of the clock will be shown flashing If no button is pressed within 5 seconds the unit will return to its previous mode If this occurs simply press the TIME button again 2 Use the UP and DOWN buttons to adjust the hours to the correct time 3 Press the TIME button again The MINUTE setting of the clock will be shown flashing 4 Use the UP and DOWN buttons to adjust the minutes to the correct time 5 Press the TIME button again The unit will exit Time Setting Mode LCD display Depending on which audio source is selected the LCD display will show the following information IPOD and AUX Volume level from o to 40 by default FM and AM Radi
6. you are too slow and the Hour digit has stopped flashing go back to STEP 5 7 Push the ALARM button The Minute digit will flash Note if you are too slow and the Minute digit has stopped flashing go back to STEP 5 8 Push the UP DOWN buttons to set the minutes for the alarm to come on Sleep Operation Alarm and Al mode setting continued 9 Push the ALARM button The display should say A ON If not push the UP button until it does 10 Push the ALARM button to exit the Alarm Setting mode You are now ready to set the Alarm Volume 11 Push the ALARM button The Hour digit will flash Note if you are too slow and the Hour digit has stopped flashing go back to STEP 5 12 Hold down the ALARM button and the buttons at the same time to adjust the volume to a suitable volume for your Alarm to switch on to eg 6 then release the buttons The Minute digit will flash 13 Push the ALARM button twice to exit Alarm Setting mode 14 Put the iPod to the song you wish to wake up to 15 Turn off the iPod it will enter Charging mode Your alarm is now set and the GrooveBase will come on and play your iPod at the right volume to wake up to Time Setting Tuning the radio 1 Press the FUNCTION button to select the desired FM or AM radio band 2 Use the UP and DOWN buttons to tune the radio to the desired frequency 3 To auto jump to the next radio station with clear reception press and hold d
Download Pdf Manuals
Related Search