Revolabs FLX2 VoIP SIP
Contents
1. Revolabs FLX2 VoIP Quick Setup Guide Congratulations on your purchase of the Revolabs FLX2 VoIP Wireless Conference Phone the first wireless VoIP Conference phone This system utilizes state of the art technology providing high bandwidth audio and s 1 C enabling clear reliable untethered communications with your telephone PC mobile device and video revo a me conferencing system The Revolabs FLX2 Conference Phone provides enhanced freedom for telephone and video conferences by allowing independent locations of the microphones and the speaker during the call Unpacking Contents FLX2 Base Station Your Revolabs FLX2 Conference Phone package contains the following items When unpacking the system be sure to take inventory of all parts to ensure that nothing is missing If parts are missing please FLX2 Charger Base contact your retailer Revolabs FLX2 Conference Phone components are partially charged Please charge the Speaker the FLX Speaker Microphones and the Dialer for at least 8 hours or overnight before using the system FLX Dialer 2 FLX Microphones lapel omni directional microphone shown 12 15V AC adapter for the Charger Base RJ45 Ethernet Cable Connecting the Base Station Place the Base Station close to the Ethernet outlet you want to use for the conference phone Connect the Base Station to the network using the provided Ethernet cable The Base Station is powered using Power over Et2. e active during the call To finish a conference call either press the red hang up button on the Dialer or return all Microphones to the Charger Base To make a call using the Dialer as a handset do not remove any Microphone from the Charger Base before starting to dial the number At this point only the Dialer will be used for the call To end the call press the red hang up button on the Dialer To toggle between handset and speaker phone mode remove a Microphone out of the Charger Tray and use the button on the Dialer To answer a call in speaker phone mode simply remove one or more Microphones from the Charger Base when the Speaker rings If a microphone is already out of the charger base when an incoming call comes in press the button on the microphone to answer the call in soeaker phone mode You can also use the Dialer to answer the call by pressing the green call button on the handset If all microphones are in the charger at this time the call will be answered using the handset mode If at least one microphone is switched on and not in the charger base this will answer the call in soeaker phone mode Safety Warnings e Do not expose any of the FLX2 components to water moisture or high humidity e Do not expose any of the FL2X components to extreme high or low temperatures e Do not expose any of the FLX2 components to lit candles cigarettes cigars or to open flames etc e Do not drop throw or try to bend any of the compo
3. he extension or name under which you want to register this phone on the IP PBX In Password provide the password for this username If no values are provided for ID and Display Name the Username entry will be used for them Select Reload Settings after you have set the values in the handset which will restart the base If further settings are required to connect the FLX phone to your IP PBX like a Proxy server please visit the FLX Web Interface You get to this interface by entering the IP address of the FLX into the web browser of your choice After you entered the password 7386 unless you changed it in the handset you can find the SIP settings under the Administrator tab on the top right You will find the different SIP settings under SIP Registration SIP Configuration Transport and Media You have to press Save an every page where you changed an entry to save these changes If you do not press Save the changes will be lost when you leave that page Restart the phone once you are finished with your changes Making a Call To make a conference call take at least one of the Microphones out of the Charger Base and take the Dialer out of the Charger Base You can remove all Microphones and the Speaker if you wish but this is not required Use the Dialer to enter the number you want to call including any leading digits your telephone connection might require The Speaker and any Microphone that is not in the Charger Base will b
4. hernet PoE This requires your Ethernet outlet to provide PoE Please check with your IT department that PoE is available If the base station does not power up after you connect it to the network outlet this outlet might not be providing PoE If your network does not support PoE please contact your reseller Revolabs provides a oN power injector that can be bought through your reseller which adds the necessary x power to that Ethernet connection Connecting the Charger Base Place the Charger Base at a location where you can easily access the Microphones and the Speaker for your conference calls e g on a side board a desk or the conference table Connect the Charger Base to the power outlet using the provided 12 15V power supply I Place the Speaker the Microphones and the Dialer in the respective openings of the T Charger Base to charge them The Dialer and Speaker will automatically connect to the Base Station after a short time if itis powered up You will hear a confirmation chime from the Speaker once the system is ready for use The Microphones only connect when taking out of the Charger Base or if the multi function button is pressed while in the Charger Base If the Speaker or the Dialer are not powered up take them out of the Charger Base for a few seconds and put them back in This will switch on the component Connecting to the VolP PBX Depending on your switch different settings w
5. ill be required for your FLX to work in your environment First of all the FLX will require an IP address The IP address can either be obtained from a DHCP server in your network or be statically set on the phone The phone is preset to DHCP If you want to change this please open the menu on the handset by pressing the right soft key go to the Setup menu and select Advanced Setup You will have to enter a password which is preset to 7386 Now select Network Settings Under IP Settings you can set the required network values like IP address subnet mask Default Gateway and DNS servers You will need to restart the phone for any changes you made in this section to take effect If you are using DHCP you can go to the System Info menu and select About System The assigned IP address for the FLX will be shown here Independent on how the IP address of your system was assigned the FLX phone has to be configured to work in your VoIP environment and communicate with your IP PBX You will have to enable the extension user you want to use with the FLX on your switch Please review your switch documentation on information on how to do that For the minimal setup in the FLX Handset you will have to provide information on the IP connection to the telephone switch To do this visit Setup Advanced Setup Network Settings VOIP Settings Under Registrar provide the IP address or host name of your IP PBX Username should be t
6. nents as rough treatment could damage them e Do not open the casings of any of the components of the FLX2 Conference Phone e Do not use any other accessories than Revolabs originals intended for use with this product Use of non original accessories may result in loss of performance damage to the product fire electric shock or injury The warranty does not cover product failures which have been caused by use of non original accessories e Only use the power adapters provided to connect the components to the power outlet e Do not open or try to modify any of the batteries delivered with the FLX2 Conference Phone components Replace batteries only with Revolabs approved batteries e Extreme heat short circuits or any attempt to open or modify the batteries might cause them to ignite or explode Please find the full FLX documentation at http www revolabs com Support Product Line FLX aspx j Revolabs HQ Revolabs 144 North Rd Europe and Africa Sudbury MA 01776 44 7970518430 reV0 aps USA Revolabs APAC 800 326 1088 85 29229 7743 Revolabs India Release 2 0 March 2012 91 124 4711630
Download Pdf Manuals
Related Search