Honeywell Stand for MS9590GS
Contents
1. the two 8 wood screws provided Figure 3 Drill Two 39 Pilot Holes for 8 Round Head Wood Screws 120 mm ref q_t 4 a s 7 72 ref 10 mm ref 125 mm nw J gt 4 gt 39 ref 4 92 145 mm e gt 5 70 Figure 4 Stand Base Hole Pattern Not to Scale Optional Wall Tabletop Stand PN 46 00885 To fix mount the stand to the wall 1 Drill two 39 pilot holes in the wall spaced 39 mm 1 54 apart on a horizontal centerline 2 Install one 8 wood screw in each of the pilot holes leaving a space between the head of the screw and the wall surface Locate the two slots marked as A on the stand base in Figure 5 Match the A slots on the stand to the heads of the installed wood screws 5 Slide the stand over the screw heads and down to lock the stand in place Bottom View of Stand Base 90 00 3 54 39 00 1 54 2X 5 00 0 20 2X 9 50 0 37 98 59 3 88 A Slots for Wall Mount 7s Applications Dimensions Millimeters Inches Figure 5 Cradle Angle Warning 130 00 5 12 Side View of Wall Mount Slide Stand Base Over Screws Wood Screws Qty 2 yy tinnar t 8 x 1 00 Wood Wall Screws Qty 2 Figure 62. Honeywell 9590 Stand Installation Guide Flex Stand Components PN 46 00709 Hen peewee Item Description Cradle Coupler Cradle Flexible Shaft Screw Cap Stand Base Ya 20 x Flat Head Phillips Screw 100 Undercut with Nylok 8 Round Head Wood Screw for fixed mount applications M3 5 x 20 mm Pan Head Phillips Screw M3 Flat Washer M3 Split Lock Washer Flexible Shaft Cover Figure 1 Stand Components 00 05249 Rev C 2 12 Flex Stand Assembly PN 46 00709 14 20 x Flat Head Front Side S Phillips 100 Undercut with Nylok Screw Cradle 7 K3 Flat Wash at Washer ri M3 Split Lock Washer O M8 520 mm S iS Pan Head Phillips Screw a a 6 Screw Cap Flexible Shaft Cover Cradle Coupler a Flexible Shaft Screw Cap Stand Base Ya 20 x Flat Head i Phillips 100 Undercut with Nylok Screw Figure 2 Stand Assembly Optional Flex Stand Fixed Mount PN 46 00709 1 In the kit two 8 wood screws have been provided for fixed mount applications When choosing the stand location make sure to consider the front orientation of the stand indicated in Figure 3 LL On a centerline drill two 39 pilot holes in the countertop spaced 125 mm 4 92 apart The stand base can be used as a guide for the spacing of the pilot holes Secure the stand base to the countertop with
Download Pdf Manuals
Related Search