Metra 99-7343 car kit
Contents
1. Mema INSTALLATION INSTRUCTIONS FOR PART 99 7343 APPLICATIONS 2011 Hyundai Sonata For models equipped without Nav and with auto climate controls 99 7343 KIT FEATURES e ISO DIN head unit provision with pocket e DDIN head unit provisions e Painted black and silver to match factory dash KIT COMPONENTS e A Radio Housing B 2 A C Vent Trim Panels e C DDIN Brackets D Display Brackets e E Pocket F 12 1 2 Phillips screws e G 2 8X1 4 Pan Head screws H 4 8X3 8 Truss Head screws FITITTT CT over TITTIT WIRING amp ANTENNA CONNECTIONS Sold Separately Wire harness e 70 7304 2010 Kia Hyundai Harness e 70 7305 2010 Kia Hyundai Amp Bypass Harness Antenna adapter e Not Required TOOLS REQUIRED Panel Removal Tool e Phillips Screwdriver e Socket Wrench SG METRA THE WORLD S BEST KITS 800 221 0932 n metraonline com COPYRIGHT 2004 2011 METRA ELECTRONICS CORPORATION Mema A 99 7343 Table of Contents Dash Disassembly Hyundai Sonata AOL Lie Liane lassi 3 4 Kit Assembly Hyundai Sonata 20 ES PR ET 5 6 ISO DIN head unit provisions 7 DOUBLE DIN head unit provisions 7 Caution Metra recommends disconnecting the negative battery terminal before beginning any installation All accessories switches and especially air bag indicator lights must be plugged2. from the factory panel Figure E Figure E Kit Assembly 1 Snap the a c vents into the a c vent 3 Snap the hazard switch into the main trim panels Figure A radio housing Figure C 2 Attach the left and right a c vent trim Continued on next page panels and the climate controls to the main radio housing panel using the provided 10 8X1 2 Phillips screws and 2 8X1 4 Pan head screws Figure B NOTE 8X1 4 Pan head screws must be installed in the indicated locations Figure B Mema A 99 7343 Kit Assembly 4 Attach the passenger air bag light to the main radio housing using 2 8X1 2 Phillips screws Figure A 5 Attach the display brackets to the display and mount it back into the dash in the factory location Figure B Continued on next page Figure B 3 Mount the assembly into the sub dash 4 Reassemble dash in reverse order Reassemble dash in reverse order Menma A 99 7343 ISO DIN head unit provisions Locate the factory wiring harness in the dash Metra recommends using the proper mating adapter from Metra or AXXESS Re connect the negative battery terminal and test the unit for proper operation Attach the DDIN brackets to the aftermarket radio using the screws supplied with the radio then secure the assembly to the pocket using the 4 supplied 8 Truss head screws Figure A of disassembly Figure A i
3. in before reconnecting the battery or cycling the ignition NOTE Refer Also to the instructions included with the aftermarket radio FAR KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry Log onto www installerinstitute com or call a 800 354 6782 for more information and take steps toward a better tomorrow Metra recommends MECP certified technicians Malia fj 99 7343 Dash Disassembly 1 Unclip and remove the 2 trim panels surrounding the shifter and pocket Figure A 2 Remove 2 Phillips screws at the bottom left and right side of the radio trim panel Figure B 3 Unclip and remove the radio trim panel including climate control and vents Figure C 4 Remove 4 Phillips screws securing the radio Figure D 5 Remove 4 Phillips screws securing the display then remove the factory brackets from the display Figure D Continued on next page Figure A Figure D Mema A 99 7343 Dash Disassembly 6 Unclip and remove the Hazard switch 8 Remove 4 Phillips screws securing from the radio panel Figure E the climate control to the radio panel 7 Remove 2 Phillips screws securing QUES E the passenger air bag light assembly 9 Remove 8 Phillips screws securing Figure E the a c vents then unclip and remove them
4. gure Double DIN head unit provisions Locate the factory wiring harness in the dash Metra recommends using the proper mating adapter from Metra or AXXESS Re connect the negative battery terminal and test the unit for proper operation Attach the Double DIN brackets to the aftermarket radio using the screws supplied with the radio then mount the unit in the sub dash Figure B of disassembly Figure B Mer INSTALLATION INSTRUCTIONS FOR PART 99 7343 REV 3 16 11 METRA THE WORLD S BEST KITS 800 221 0932 n metraonline com COPYRIGHT 2004 2011 METRA ELECTRONICS CORPORATION
Download Pdf Manuals
Related Search