Eltako ER12-002-8..230V UC
Contents
1. Fluorescent lamps with KVG 500 VA shunt compensated or wih EVG Compact fluorescent lamp with lon lt 70A EVG and energy saving lamps 10 ms Standby loss activ power D For lamps with 150W max 2 For electronic ballast gears a 40fold inrush current has to be calculated For steady loads of 1200W use the current limiting relay SBR12 The strain relief clamps of the terminals must be closed that means the screws must be tightened for testing the function of the device The terminals are open ex works Warning Only a trained electrician may install this equipment otherwise there is a risk of fire or electric shock 01 2009 Specifications subject to change2. 22 001 601 1 22 002 601 1 ELECTRONICS Switching relays CE ER12 001 8 230V UC ERI2 002 8 230V UC ER12 001 1 change over contact potential free 16 A 250V AC Safe disconnection to VDE 0106 Part 101 therefore these devices can also be used as coupling relays ER12 002 2 change over contacts potential free 16 A 250V AC Incandescent lamp load up to 2000 W No standby loss Modular device for DIN EN 60715 TH35 rail mounting 1 module 18mm wide 58mm deep State of the art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays Universal control voltage 8 to 230V UC Low switching noise Contact position indicator with LED Integrated free wheeling anti surge diode Al A2 By using a bistable relay coil power loss and heating is avoided even in the on mode The relay contact can be open or closed when putting into operation It will be synchronised at first operation Typical connections L NO 8 230V UC L N 44 ER12 001 L Nc EVU i L N L ER12 002 Technical Data Control voltage 8 230V UC Rated switching capacity 16A 250V AC Incandescent lamp load and 2000 W halogen lamp load 230V Fluorescent lamp load with KVG 1000 VA in lead lag circuit or non compensated
Download Pdf Manuals
Related Search