JDSU TP650 cable network tester
Contents
1. off Units Inputs RJ11 Coax amp RJ45 Telco Mode Button Coax Mode Button Network Mode Button AO SIE GD ON iGO PS ER Feet Meters Shielded or un shielded telco and network Up Arrow cables SEL Select Button Backlight Quickly pressing the Power Button 9 turns Down Arrow the backlight on off SETUP Button Power Button 0 Remote For more informatior nical helg it www jdsu com know KnowtheNetwork2. TestifierPRO TP650 Cable Tester Quick Start Guide Essentials of Cable Testing 1 A Plug the cable into the correct input 1 Telco to RJ11 Coax to F connector Network Ethernet to RJ45 B Plug the opposite end into the Remote 10 for telco and network tests or the coax remote for coax tests 3 C Press the appropriate mode button 2 3 4 for the cable being tested Repeated presses of a mode button cycles through all the tests available for that mode 2 4 D When the desired test option is displayed such as tone or length measurement press SEL 6 to execute the test 5 7 Functions Cable ID Use up to 8 full test remotes included in TP655 8 kit or up to 20 ID only remotes optional to identify cable runs 6 9 Length Testing Measure opens length of cable using capacitance SEL 6 to select pair Up and down arrows 5 7 to select capacitive constant Toning Send tone on individual pins pairs or shield and trace with a probe SEL 6 cycles through available 10 tones Up and down arrows 5 7 select pin or pair or shield for coax tone is sent on Cable Testing With no remote connected will test for shorts opens and split pairs Full wiremapping with Fi remote connected Button Functions Hub Blink Flashes the Link LED on an Ethernet device Simple method of identifying which port a cable is connected to Setup Button 8 Up and down arrows 5 7 cycle through three settings Pass Beep on
Download Pdf Manuals
Related Search