Draper WRT/R
Contents
1. Each receiver will learn up to five unique transmitters 121062 WRT R Transmitter and Receiver 121063 WRT Transmitter only Splitter and power supply provided with MC1 WRT R Kit not required with LVC III WRTIR kit 411 S Pearl St Spiceland IN 47385 USA I 765 987 7999 www draperinc com I fax 765 987 7142 Copyright 2009 Draper Inc Form WRT R_TechDataSheetO9 Printer in U S A2. Technical Data Sheet WRT R Radio Frequency Transmitter Receiver By Draper USES COMPATIBILITY CONTACTS RATING DESCRIPTION PART NUMBERS ILLUSTRATION Up Down and Stop control of an LVC III or MC1 via RF radio frequency The WRT R can be used with either the LVC III or the MC1 with a splitter and a power supply Other controls may be connected to the LVC III or MC1 simultaneously a LVC S low voltage wall switch or Auxiliary control systems employing dry contacts b IRT R infrared remote control package with splitter c LVC SL LED low voltage wall switch with splitter The transmitter part of this package the WRT is a dual RF IR transmitter and is available as a replacement part The receiver part of this package can learn up to five remotes None This package merely consists of the transmitter and receiver The contacts are part of the LVC III or MC1 Operates on a frequency of 433 Mhz Transmitter operates on two AAA batteries The WRTIR is a package consisting of a receiver and hand held transmitter which control an LVC III or MC1 via radio frequency Its range with fresh batteries is approx 75 The transmitter is approx 2 s wide 534 long and 1 2 thick Operates on two AAA batteries included The receiver is approx 37 s x 2 s x 1 with an antenna approx 134 long and a 10 long 4 conductor modular cable which plugs into a standard RJ 11 plug on the LVC III or MC1
Download Pdf Manuals
Related Search