CRU DataPort 5 IDE/ATA-6
Contents
1. rier in Using thumb pressure fully seat the carrier in the frame and lock the carrier with the keylock You have finished the installation and your DataPort is ready for operation gt 1 800 260 9800 gt www CRU DataPort com CRI Rugged Reliable Mobile Secure Operation DataPort V and V plus LED functions The green LED on the DataPort V and V plus will light up when the DataPort is locked and powered up The green LED will blink when the fan is not functioning The red LED is the drive activity LED and will flash when there Is drive activity Fan Alarm The DataPort V plus has a fan alarm that will sound if the fan no longer functions properly The alarm can be silenced by removing the jumper between the fan and the alarm on the back of the DataPort frame Save the jumper and re install it after replacing the fan Please contact CRU to obtain a replacement fan Limited Product Warranty CRU DataPort CRU warrants the DataPort V and V plus to be free of significant defects in material and workmanship for a period of five 5 years from the original date of purchase CRU s warranty is nontransferable and is limited to the original purchaser Limitation of Liability The warranties set forth in this agreement replace all other warranties CRU expressly disclaims all other warranties including but not limited to the implied warranties of merchantability and fitness for a particular purpose and noninfringement of third party2. rights with respect to the documentation and hardware No CRU dealer agent or employee is authorized to make any modification extension or addition to this warranty In no event will CRU or its suppliers be liable for any costs of procurement of substitute products or services lost profits loss of information or data computer malfunction or any other special indirect consequential or incidental damages aris ing in any way out of the sale of use of or inability to use any CRU product or service even if CRU has been advised of the possibility of such damages In no case shall CRU s liability exceed the actual money paid for the products at issue CRU reserves the right to make modifications and additions to this product without notice or taking on additional liability Register your product at www CRU DataPort com As 005 0004 Rev 2 1 gt 1 800 260 9800 gt www CRU DataPort com
3. Un Rugged Reliable Mobile Secure DataPort V amp V plus IDE Installation Guide Package Contents DataPort frame assembly DataPort carrier assembly Metal covers 6 x 32 x 3 8 flat head screws for hard drive mounting M3 x 10mm Phillips pan head screws for frame mounting Keys for lock Cover removal tool Mounting The Frame In The Computer _ Turn off the computer and disconnect the power cord from the electrical outlet Before working on your computer wait one minute for any residual energy to dissipate Ground yourself by touching the chassis of the computer 2 Locate an available 5 25 drive bay with external access Remove the cover of the computer Identify the 5 25 half height bay in which you plan to mount the DataPort frame assembly Examine the bay to determine the location of mount ing holes or whether mounting rails are required Remove any filler plates that may be present on the computer 3 Rail mounting the frame If the drive bay requires mounting rails install one on each side of the frame The mounting rails should be provided with your computer system 4 Direct mounting the frame Slide the frame into the 5 25 bay some computer bezels will not allow the frame to be inserted from the front Install the frame from inside the computer Secure the frame with the screws provided 5 Connect the DC power cable to the frame Locate an available 4 pin DC power cable fr
4. om the computer power supply and plug it into the receptacle on the frame 6 Connect the data cable to the frame Locate the computer s data cable and connect it to the data connector on the frame Ensure that pin 1 of the data con nector printed on the circuit board matches pin 1 on the cable identified by the red dots The frame installation is now complete Mounting A Hard Drive In The Carrier _ Remove the carriers top and bottom covers The metal covers for the DataPort carrier are snapped into place on the carrier without any screws The supplied cover removal tool or a small flat head screwdriver is handy for this task NO set the jumper on the drive as Master or Cable Select before placing the hard drive in carrier See the Hard drive s manual for details OO Plug the 4 pin DC power cable into the power connector on the hard drive and ensure it Is fully seated 4 Connect the data cable in the carrier to the hard drive O1 Place the drive in the carrier and use the four screws provided to side mount the hard drive Position the cables inside the carrier assembly so that they are completely enclosed within the carrier For DataPort V plus attach the Temperature Control Cooling Sen sor TCCS to the top of the hard drive with an adhesive strip or a piece of tape Replace the top and bottom covers on the carrier O Position the carrier on the frame s guide rails and slide the car
Download Pdf Manuals
Related Search