KRAM Xpress mute Kabel
Contents
1. Xpress mutecables Diagram Fakra Xpress mutecable 85xxx The diagram shows the connector from the cable entry side FWD Block Pin Description Colour Warning No Grey Black CHECK the configuration Grey Black Of the constant 12v and the ignition wire as the in some models can be 4 02v ignition switch If the wires is switch it can be cor e frenes fory rected by using the two 7 Fraveemanen_Jaes bolit connectors o ety f Xpress mutecables Instruction for Fakra Xpress mutecable 85xxx Carkitbox Made in Denmark by Kram Telecom A S EN609 Xpress mutecables Product description Fakra Xpress cable 85xxx Xpress mutecables are designed to interface between the car radio and vehicle harness It enables the use of one of the car speakers when answering making calls from your cell phone It also provides power supply for the handsfree kit and mutes the radio in order to let the conversation be heard Normally no vehicle wires needs to be cut Speaker function This is achieved by connecting the carkit di rectly to one of the car speakers By using the carkits built in relays the telephone conversation is send through the car speaker while the radio is muted This way you will achieve a perfect handsfree sound without interference from the car ra dio Power supply of the carkit All Xpress mutecables are deliv ered with a power connector for the carkit That way you avoid2. cutting the cars wiring loom Note 1 This cableset is designed to plug directly into the FWD Audio Profi and Audio 2000 carkits Use of this Xpress mute cable with other carkits require a Carkit specifik Xpress adap tor cable Note 2 The cableset is only to be used for cars without sepa rate amplifiers or active loudspeakers See our complete Xpress program on www kram dk Xpress mutecables Installation description Fakra Xpress cable 85xxx Ist Remove the radio radio unit from the car following the manufacturers guide 2nd Disconnect the Fakra connector from the radio 3rd Connect the female end of the Xpress mutecable to the cars wiring loom and connect the male end to the connector at the back of the radio Ard Check the configuration of the permanent plus and the ignition power supply wires as they in some vehicles can be switched The ignition wire is the blue wire in the 8 way FWD connector and the permanent is the red wire 5rd Check the mute position The mute position can varies according to each model and year of the vehicle but it is usually found at a prefitted position chosen by Kram Tele com The mute wire is the yellow wire in the 8 way FWD connector 6rd Some fakra connectors on the cars wiriong loom has small connectors fitted to one or two of the bottom slots These are often for CD changer connection or External radio displays These small connectors will have to be moved to the Fakra con
3. nector that is fitted to the back of the radio The same goes for Optic wires 7rd Refit the radio
Download Pdf Manuals
Related Search