Home

Philips LCD widescreen monitor 220VW8FB

1.
2. m The screen is too bright or too dark An after image appears An after image remains after the power has been turned off Press the Auto button Adjust the image position using the Horizontal Position and or Vertical Position in OSD Main Controls Check that the signal cable is properly connected to the graphics board or PC Press the Auto button Eliminate the vertical bars using the Phase Clock of More Settings in OSD Main Controls Press the Auto button Eliminate the vertical bars using the Phase Clock of More Settings in OSD Main Controls Adjust the contrast and brightness on OSD Main Controls The backlight of the LCD monitor has a fixed life span When the screen becomes dark or begins to flicker please contact your dealer If an image remains on the screen for an extended period of time it may be imprinted in the screen and leave an after image This usually disappears after a few hours This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal The after image will disappear after a peroid of time r to the C CE Declaration of Conformity Energy Star Declaration Federal Communications Commission FCC Notice U S Only eFCC Declaration of Conformity Commission Federale de la Communication FCC Declaration eEN 55022 Compliance Czech Republic
3. e Product Information Click Product Information in the left pane to view the product information stored in the monitor s memory Pha p eed Meer al VIDA 1512 Mod Tl xl ass Mena okrMaeagemert 93 THT Maciel Ph p ima gt A em kem brigama Kane Ph p 1708 e General Click on General for general information including driver information device information and monitor control ien Pha Panel Pinela al NYIDOA 3 A Mex Colon Management Y ARTE tow hamasa Within monitor control users can click on Auto Setup to achieve optimum performance or click on factory reset to reset the parameters of the monitor Such choices are disabled when using DVI D digit input Q amp A Q1 What is the difference between SmartManage SmartControl A SmartManage is a remote management control software for IT managers to manage monitors across the network SmartControl is a control panel extension which helps users to adjust monitor performances and settings by a software interface instead of the hardware buttons at the front bezel of the monitors Q2 change the monitor on a PC to a different one and the SmartControl becomes un usable what do do A Restart your PC and see if SmartControl can work Otherwise you will need to remove and re install SmartControl to ensure proper
4. Office Work Select this mode for general office application like word processing spreadsheet and email The screen is dominated by text Internet Select this mode for Internet application especially web browsing The screen is mixed by text and picture Image Viewing Select this mode for image viewing application especially in slid show The screen is dominated by picture Video Playback Select this mode for video application like Microsoft Media Player or Real Player The screen is dominated by video Gaming Select this mode for PC game software The screen is dominated by artificial animation with rich color Off No optimization by Smartlmage Lite SmartResponse Selective Models Product What it is SmartResponse is exclusive Philips technology that adjusts response time to application requirements delivering faster response times for gaming and videos or better color saturation for viewing photos and static images Why Need it You want optimal display for every type of application Static or steady image display without noise or color shifting as well as blurring and ghosting free performance when viewing action movies or videos How to use it Select the video and gaming playback profile to ramp up response time for blur and ghosting free display of fast moving images in action movies or videos choose the image viewing profile for optimal display of steady or static images without noise or co
5. Fax 9221 2721167 E mail care O philips com Website www philips com pk PHILIPPINES PHILIPS ELECTRONICS amp LIGHTING INC Consumer Electronics 48F PBCOM tower 6795 Ayala Avenue cor VA Rufino St Salcedo Village 1227 Makati City PHILS Phone 02 888 0572 Domestic Toll Free 1 800 10 PHILIPS or 1 800 10 744 5477 Fax 02 888 0571 SINGAPORE Accord Customer Care Solutions Ltd Authorized Philips Service Center Consumer Service 620A Lorong 1 Toa Rayoh Singapore 319762 Tel 65 6882 3999 Fax 65 6250 8037 TAIWAN Philips Taiwan Ltd Consumer Information Centre 13F No 3 1 Yuan Qu St Nan Gang Dist Taipei 115 Taiwan Phone 0800 231 099 Fax 02 3789 2641 THAILAND Philips Electronics Thailand Ltd 26 28th floor Thai Summit Tower 1768 New Petchburi Road Khwaeng Bangkapi Khet Huaykhwang Bangkok10320 Thailand Tel 66 2 6528652 E mail cic Thai philips com MOROCCO Philips Electronique Maroc 304 BD Mohamed V Casablanca Phone 02 302992 Fax 02 303446 SOUTH AFRICA PHILIPS SA PTY LTD Customer Care Center 195 Main Road Martindale Johannesburg P O box 58088 Newville 2114 Telephone 27 0 11 471 5194 Fax 27 0 11 471 5123 E mail customercare za O philips com Middle East DUBAI Philips Middle East B V Consumer Information Centre P O Box 7785 DUBAI Phone 04 335 3666 Fax 04 335 3999 Your International Guarantee De
6. S A Division de Servicio CARRERA 15 Nr 104 33 Bogota Colombia Phone 01 8000 111001 toll free Fax 01 619 4300 619 4104 MEXICO Consumer Information Centre Norte 45 No 669 Col Industrial Vallejo C P 02300 Mexico D F Phone 05 3687788 9180050462 Fax 05 7284272 PARAGUAY Av Rca Argentina 1780 c Alfredo Seiferheld P O Box 605 Phone 595 21 664 333 Fax 595 21 664 336 Customer Desk Phone 009 800 54 1 0004 PERU Philips Peruana S A Customer Desk Comandante Espinar 719 Casilla 1841 Limab18 Phone 01 2136200 Fax 01 2136276 URUGUAY Rambla O Higgins 5303 Montevideo Uruguay Phone 598 619 66 66 Fax 598 619 77 77 Customer Desk Phone 0004054176 VENEZUELA Industrias Venezolanas Philips S A Apartado Postal 1167 Caracas 1010 A Phone 02 2377575 Fax 02 2376420 CANADA Philips Electronics Ltd 281 Hillmount Road Markham Ontario L6C 253 Phone 800 479 6696 AUSTRALIA Philips Consumer Electronics Consumer Care Center Level 1 65 Epping Rd North Ryde NSW 2113 Phone 1300 363 391 Fax 61 2 9947 0063 NEW ZEALAND Philips New Zealand Ltd Consumer Help Desk 2 Wagener Place Mt Albert P O box 1041 Auckland Phone 0800 477 999 toll free Fax 0800 288 588 BANGLADESH Philips Service Centre 100 Kazi Nazrul Islam Avenue Kawran Bazar C A Dhaka 1215 Phone 02 812909 Fax 02 813062 CHINA SHANGHAI Rm 1007
7. USB eliminates case anxiety the fear of removing the computer case to install circuit board cards that often requires adjustment of complicated IRQ settings for add on peripherals USB does away with port gridlock Without USB PCs are normally limited to one printer two Com port devices usually a mouse and modem one Enhanced Parallel Port add on scanner or video camera for example and a joystick More and more peripherals for multimedia computers come on the market every day With USB up to 127 devices can run simultaneously on one computer USB permits hot plug in No need to shut down plug in reboot and run set up to install peripherals No need to go through the reverse process to unplug a device Bottom line USB transforms today s Plug and Pray into true Plug and Play Please refer to glossary for more information about USB Q What is a USB hub A A USB hub provides additional connections to the Universal Serial Bus A hub s upstream port connects a hub to the host usually a PC Multiple downstream ports in a hub allows connection to another hub or device such as a USB keyboard camera or printer What can do if my USB peripherals don t work with the USB hub of my monitor A If you experience the problem just detach and re attach the USB hub cable between PC and your monitor then refresh your PC device manager Start gt Setting Control panel System Hardware Device manager Refr
8. 0 282 mm 1680 x 1050 pixels e LCD Panel type R G B vertical stripe Anti glare polarizer hard coated Effective viewing area 1473 76 x 296 1 mm SCANNING Vertical refresh rate 56 Hz 75 Hz Horizontal Frequency Hz 93 kHz un e Video dot rate 165 2 Input impedance impedance EX Video ohm Sync 2 ohm Input signal levels 0 7 Vpp Separate sync e Sync input signal Composite sync Sync on green Sync polarities Positive and negative Video interface D Sub analog e Smartlmage Lite Selective Models Brightness contrast color and sharpness enhancement um characteristics Peakcontrastangle x 0 283 y 0 297 at 9300 K e White Chromaticity x 0 313 y 0 329 at 6500 K x 0 313 y 0 329 at SRGB This data is subject to change without notice RETURN TO TOP OF THE PAGE Resolution amp Preset Modes 1680 x 1050 at 60 Hz analog input Maximum e Recommended 1680 x 1050 at 60 Hz 24 user definable modes 16 factory preset modes I Resolution V roa 25 17 640 350 70 25 17 640 480 60 30 24 640 480 67 31 5 640 480 75 31 25 688 556 50 28 32 720 400 70 36 800 600 57 40 800 600 60 800 600 75 1024 768 60 1024 768 75 1152 870 75 1280 1024 60 1280 1024 75 1600 1200 60 1680 1050 60 RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA DPMS compliance display card or software installed in your PC the monitor can
9. Control Panel Double click on the Display Icon Select the Settings tab then click on Advanced Select Monitor the Properties button is inactive it means your monitor is properly configured Please stop installation If the Properties button is active Click on Properties button Please follow the steps given below 6 Click on Driver and then click on Update Driver then click on the Next button NA D Select Display a list of the known drivers for this device so that can choose a specific driver then click on Next and then click on Have disk Click on the Browse button then select the appropriate drive F CD ROM Drive Click on the Open button then click on the OK button Select your monitor model and click on the Next button Click on the Finish button then the Close button If you can see the Digital Signature Not Found window click on the Yes button For Windows Me Start Windows Me Click on the Start button point to Settings and then click on Control Panel Double click on the Display Icon Select the Settings tab then click on Advanced Select the Monitor button then click on Change button Select Specify the location of the driver Advanced and click on the Next button Select Display a list of all the drivers in a specific location so you can choose the driver you wa
10. Digital and Analog support in a single connector DVI I only RETURN TO TOP OF THE PAGE E Embedded Power Supply An embedded power supply is a power adaptor built into the body of a display device that replaces a bulky external power adaptor Energy Star Computers Program An energy conservation program launched by the US Environmental Protection Agency EPA promotes the manufacture and marketing of energy efficient office automation equipment Companies joining this program must be willing to commit themselves to manufacture one or more products capable of going into a low power state 30 W either after a period of inactivity or after a predetermined time selected by the user RETURN TO TOP OF THE PAGE F FPadjust Program The FP Adjust program generates alignment patterns which will help you adjust monitor settings such as CONTRAST BRIGHTNESS HORIZONTAL amp VERTICAL POSITION PHASE and CLOCK RETURN TO TOP OF THE PAGE G Gamma Screen luminance as a function of video voltage approximately follows a mathematical power function of the input video signal the exponent of which is called gamma Grayscale An achromatic scale ranging from black through a series of successively lighter grays to white Such a series may be made up of steps which appear to be equally distant from one another If the Analog Digital converter is 8 bit then the monitor can display at most 28 256 levels For a color monitor
11. LED is amber or yellow Screen says ENTERING SLEEP MODE Screen says THIS 18 OVERDRIVE CHANGE COMPUTER DISPLAY INPUT TO 16801 050 60Hz AUTO button not working properly Make sure the power cord is plugged into the power outlet and into the back of the monitor First ensure that the power button on the front of the monitor is in the OFF position then press it to the ON position Make sure the computer is turned on Make sure the signal cable is properly connected to your computer Check to see if the monitor cable has bent pins The Energy Saving feature may be activated Make sure the monitor cable is properly connected to your computer Also refer to the Quick Set Up Guide Check to see if the monitor cable has bent pins Make sure the computer is turned on Make sure the vertical sync of input signal is within the range of 56 75 Hz Change the refresh rate to 56 75Hz within 10 minutes Re power on monitor to start over again if you failed to change the refresh rate within 10 minutes The Auto Function is designed for use on standard Macintosh or IBM compatible PCs running Microsoft Windows It may not work properly if using nonstandard PC or video card The AUTO adjustment does not function when digital input is used for display Problems Display position is incorrect Image vibrates on the screen Vertical flicker appears Horizontal flicker appears
12. Monitor It describes the LCD monitor s features setup operation and other important information Its contents are identical to the information in our printed version It includes the following sections Safety and Troubleshooting Information provides tips and solutions for common problems as well as other related information you may need About This Electronic User s Manual gives an overview of information included along with notation icon descriptions and other documentation for your reference Product Information gives an overview of the monitor s features as well as the technical specifications for this monitor Installing Your Monitor describes the initial setup process and gives an overview of how to use the monitor On Screen Display provides information on adjusting the settings on your monitor Customer Care and Warranty contains a list of worldwide Philips Consumer Information Centers along with help desk phone numbers and information on the warranty applicable to your product e Glossary defines technical terms e Download and Print Option transfers this entire manual to your hard drive for easy reference RETURN TO TOP OF THE PAGE Notational Descriptions The following subsections describe notational conventions used in this document Notes Cautions and Warnings Throughout this guide blocks of text may be accompanied by an icon and printed in bold or italic type These blocks contain notes cautions or warnings They ar
13. any problems with your monitor within the second or third year of purchase we will repair it after it has been sent to the service provider at your expense and returned to you within five working days free of charge LIMITED WARRANTY Computer Monitor Click here to access the Warranty Registration Card Three Years Free Labor Three Years Free Service on Parts One Year Exchange Product will be exchanged with a new or renewed to original specifications unit within two business days for the first year This product must be shipped in at your expense for service during years two and three WHO IS COVERED You must have proof of purchase to receive warranty service A sales receipt or other document showing that you purchased the product is considered proof of purchase Attach it to this owner s manual and keep both nearby WHAT IS COVERED Warranty coverage begins the day you buy your product For three years thereafter all parts will be repaired or replaced and labor is free After three years from the day of purchase you pay for the replacement or repair of all parts and for all labor charges All parts including repaired and replaced parts are covered only for the original warranty period When the warranty on the original product expires the warranty on all replaced and repaired products and parts also expires WHAT IS EXCLUDED Your warranty does not cover labor charges for installation or setup of the prod
14. automatically reduce its power consumption when not in use If an input from a keyboard mouse or other input device is detected the monitor will wake up automatically The following table shows the power consumption and signaling of this automatic power saving feature Power Management Definition VESA Mode Video H sync V sync Power Used E color Active ON Yes Yes 45 W TYP Green Sleep OFF No No 1W Amber Switch Off OFF gt 1W Off This monitor is ENERGY STAR compliant As an ENERGY STAR Partner PHILIPS has determined that this product meets the ENERGY STAR guidelines for energy efficiency RETURN TO TOP OF THE PAGE Physical Specifications MM with Stand 513 8 x 416 2 x 213 6 mm Weight 5 6 kg ns 5 25 Power supply 100 240VAC 60 50Hz e Power consumption 45 W TYP 5 C to 35 C operating Temperature 20 C to 60 C storage Relative humidity 110 to 85 System MTBF 50K hours including CCFL 40K hours Cabinet color 220VW8 Black This data is subject to change without notice Resolution1680x1050 standard size brightness max contrast 50 6500 K full white pattern without audio USB RETURN TO TOP OF THE PAGE Pin Assignment 1 The 15 pin D sub connector male of the signal cable E CIN Assignment 2 Green video input SOG 10 Logic ground 4 Sense GND 12 Serial data line SDA 5 Hot
15. can also use SmartControl to adjust monitor s performance settings 1 Requirement Graphic cards with nVIDIA TNT2 GeForce Quadro or newer and ATI Radeon or newer graphic chipsets that support the DDC CI interface Microsoft Windows 2000 and XP operation systems Philips monitors supporting DDC CI interface 2 Installation How to download SmartControl Installation file Visit http www philips com Select Your Country Click on Contact amp Support Enter your model number Enter Software amp Driver page Select SmartControl Software and you can download SmartControl and its driver for installation 3 Accessing SmartControl Right click on the desktop of your PC and select Properties from the shortcut menu pops up e Click on Settings tab and click on Advanced button Click Philips SmartControl tab 4 SmartControl Options Display and Sound By moving the sliding bar toward left or right users will be able to adjust brightness contrast audio volume if applicable video noise not applicable when using DVI D input and color temperatures Sees Flat Pan Meester anal TA IVA TT x Mee X3 ode la Pigs Error Position Users can adjust the horizontal and vertical position of the screen by moving the sliding bar left and right bos HH Servers Phal pareri Mercer ened STL MIA TATA 3 Gere eus Tablet Mia a a
16. gelieferte Farbmonitor entspricht den in der Verordnung ber den Schutz vor Sch den durch R ntgenstrahlen festgelegten Vorschriften Auf der R ckwand des Ger tes befindet sich ein Aufkleber der auf die Unbedenklichkeit der Inbetriebnahme hinweist da die Vorschriften ber die Bauart von St rstrahlern nach Anlage Ill x 5 Abs 4 der R ntgenverordnung erf llt sind Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht ist darauf zu achten da Reparaturen nur durch Fachpersonal durchgef hrt werden 2 nur original Ersatzteile verwendet werden 3 bei Ersatz der Bildr hre nur eine bauartgleiche eingebaut wird Aus ergonomischen Gr nden wird empfohlen die Grundfarben Blau und Rot nicht auf dunklem Untergrund zu verwenden schlechte Lesbarkeit und erh hte Augenbelastung bei zu geringem Zeichenkontrast w ren die Folge Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 betr gt 70dB A oder weniger ACHTUNG BEIM AUFSTELLEN DIESES GER TES DARAUF ACHTEN DAB NETZSTECKER UND NETZKABELANSCHLU LEICHT ZUGANGLICH SIND RETURN TO TOP OF THE PAGE End of Life Disposal Your new monitor contains materials that can be recycled and reused Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer For c
17. gt P ErBIHRBACHT Pr As d 5 39 Ik s oc is same sake Pb dip ers PBB mE Hd ojojoj o o _ 5 Jo o o o 1 px e ojo fo I 90 WMA WMA pop ERREFE Fp 62536 dud s 36 e BIB ER Eo 4458 3 ATRAGA Ede TCR PH RC PS EPR 8 Fr s PERS 99 K mE 5 2 AA 4 57 ATESA SHREVE HO HE cH r P rib CRT E P m 6 8 d Anm RTE 01 5 9 PET M mat ff Et ROS AL CR T 16 36 RETURN TOP OF THE PAGE For units set at 115 V Use a UL Listed Cord Set consisting of a minimum 18 AWG Type SVT or SJT three conductor cord a maximum of 15 feet long and a parallel blade grounding type attachment plug rated 15 A 125 V For units set at 230 V Use a UL Listed Cord Set consisting of a minimum 18 AWG Type SVT or SJT three conductor cord a maximum of 15 feet long and a tandem blade grounding type attachment plug rated 15 A 250 V For units set at 230 V Use a Cord Set consisting of a minimum 18 AWG cord and grounding type attachment plug rated 15 A 250 V The Cord Set should have the appropriate safety approvals for the country in which the equipment will be installed and or be marked HAR RETURN TO TOP OF THE PAGE About This About This Manual Guide e Notational Descriptions About This Guide This electronic user s guide is intended for anyone who uses the Philips LCD
18. if notified of the possibility of such damages REMEMBER Please record the model and serial numbers found on the product below MODEL SERIAL This warranty gives you specific legal rights You may have other rights which vary from state province to state province Before contacting Philips please prepare the following details so we can solve your problem quickly Philips type number Philips serial number Purchase date copy of purchase may be required PC environment Processor O 286 386 486 Pentium Pro Internal memory O Operating system Windows DOS OS 2 Apple Macintosh o Fax Modem Internet program e Other cards installed Having the following information available will also help speed up the process e Your proof of purchase indicating date of purchase dealer name model and product serial number e The full address to which the swap model should be delivered Just a phone call away Philips customer help desks are located worldwide Within the U S you can contact Philips customer care Monday Friday from 8 00 AM 9 00 PM Eastern Time ET and on Saturdays from 10 00 AM 5 00 PM ET hrs by using one of the contact phone numbers For more information on this and more great Philips products visit our website at Website http www philips com Glossary ABCDEFGHIJKLMNOPQRSTUVWXYZ Active matrix This is a kind of liquid crystal display structure in which switching transistors are attached to e
19. is being heated This measurement is express in terms of absolute scale degrees Kelvin Lower Kelvin temperatures such as 2400 K are red higher temperatures such as 9300 K are blue Neutral temperature is white at 6504 K Philips monitors generally offers 9300 K 6500 K and user define Contrast The luminance variation between light and dark areas in an image Contrast ratio The ratio of luminance between the brightest white pattern and the darkest black pattern RETURN TO TOP OF THE PAGE D Dual Input Dual input provides connectors to accommodate input of both analog VGA and digital DVI signals D SUB A VGA Analog input connector Your monitor comes with a D Sub cable Digital Visual Interface DVI The Digital Visual Interface DVI specification provides a high speed digital connection for visual data types that is display technology independent The interface is primarily focused at providing a connection between a computer and its display device The DVI specification meets the needs of all segments of the PC industry workstation desktop laptop etc and will enable these different segments to unite around one monitor interface specification The DVI interface enables 1 Reduce signal loss and video noise in signal due to less signal conversion 2 Independent from display technology and can be used on LCD Plasma LCOS etc 3 Plug and play through hot plug detection EDID and DDC2B 4
20. o Bulevar Vojvode Misica 37B YU 11000 Belgrade Tel 381 11 30 60 881 Email tehnicom service tehnicom com www tehnicom service com SLOVAKIA Datalan Servisne Stredisko Puchovska 8 SK 831 06 Bratislava Tel 421 2 49207155 Email servis datalan sk SLOVENIA PC HAND Brezovce 10 SI 1236 Trzin Tel 386 1 530 08 24 Email servis pchand si POLAND Zolter ul Zytnia 1 PL 05 500 Piaseczno Tel 48 22 7501766 Email servmonitor zolter com pl www zolter com pl RUSSIA Tel 7 095 961 1111 Tel 8 800 200 0880 Website www philips ru TURKEY T rk Philips Ticaret A S Yukari Dudullu Org San Bolgesi 2 Cadde No 22 34776 Umraniye Istanbul Tel 0800 261 33 02 UKRAINE Comel Shevchenko street 32 UA 49030 Dnepropetrovsk Tel 380 562320045 www csp comel com ANTILLES Philips Antillana N V Kaminda A J E Kusters 4 Zeelandia P O box 3523 3051 Willemstad Curacao Phone 09 4612799 Fax 09 4612772 ARGENTINA Philips Antillana N V Vedia 3892 Capital Federal CP 1430 Buenos Aires Phone Fax 011 4544 2047 BRASIL Philips da Amazonia Ind Elet Ltda Rua Verbo Divino 1400 Sao Paulo SP CEP 04719 002 Phones 11 21210203 Sao Paulo amp 0800 701 0203 Other Regions without Sao Paulo City CHILE Philips Chilena S A Avenida Santa Maria 0760 P O box 2687Santiago de Chile Phone 02 730 2000 Fax 02 777 6730 COLOMBIA Industrias Philips de Colombia
21. screen display interface is shown as below MONITOR SETUP W Brightness amp Contrast Color D Position More Settings 8 Reset to Confirm Basic and simple instruction on the control keys In the OSD shown above users can press AW buttons on the right side of the monitor to move the cursor 0K to confirm the choice or change and 4 b to adjust select the change RETURN TO TOP OF THE PAGE The OSD Tree Below is an overall view of the structure of the On Screen Display You can use this as a reference when you want to work your way around the different adjustments later on Only available Main Menu Exit Brightness amp Contrast ightness ontrast ack Color English Espa ol Francais Deutsch Italiana Exit Brightness amp Contrast rightness ontrast Color English Espa ol Fran ais Portugu s Tx Back Phase Clock Back Only available IO A Main Menu Exit Brightness amp Contrast ightness ontrast Back Color English Espa ol Fran ais Deutsch Italiano P Back Clock Back OSD Settings izontal vertical Back Audio Options stand alone Mute Back 3martResponse Te Off ack Note sRGB is a standard for ensuring correct exchange of colors between different devices e g digital cameras monitors printers scanners etc Using a standard unified color space SRGB will help re
22. the OK button then select Reset to recall all of the original factory settings Q What is the Auto function A The AUTO adjustment key restores the optimal screen position phase and clock settings by pressing of a single button without the need to navigate through OSD On Screen Display menus and control keys Note Auto function is available in selected models from D sub input Q My Monitor has no power Power LED does not light up What should do A Make sure the AC power cord is connected between the monitor and AC outlet and click a key on keyboard mouse to wake up the PC Q Will the LCD monitor accept an interlaced signal under PC models A No If an Interlace signal is used the screen displays both odd and even horizontal scanning lines at the same time thus distorting the picture Q What does the Refresh Rate mean for LCD A Unlike CRT display technology in which the speed of the electron beam is swept from the top to the bottom of the screen determines flicker an active matrix display uses an active element TFT to control each individual pixel and the refresh rate is therefore not really applicable to LCD technology Q Will the LCD screen be resistant to scratches A A protective coating is applied to the surface of the LCD which is durable to a certain extent approximately up to the hardness of a 2H pencil In general it is recommended that the panel surface is not subject to any excessive s
23. to 1680x1050 pixels 22 Information Open Advanced Properties and set the Refresh Rate to 60Hz then click e Other Related OK Inforination Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1680x1050 60Hz 22 Shut down your computer disconnect your old monitor and reconnect your Philips LCD monitor Turn on your monitor and then turn on your PC e Troubleshooting Q What does refresh rate mean in connection with an LCD monitor A The refresh rate is of much less relevance for LCD monitors LCD monitors display a stable flicker free image at 60Hz There is no visible difference between 85Hz and 60Hz Q What are the inf and icm files on the CD ROM How do linstall the drivers inf and icm A These are the driver files for your monitor Follow the instructions in your user manual to install the drivers Your computer may ask you for monitor drivers inf and icm files or a driver disk when you first install your monitor Follow the instructions to insert the companion CD ROM included in this package Monitor drivers inf and icm files will be installed automatically Q How do adjust the resolution A Your video card graphic driver and monitor together determine the available resolutions You can select the desired resolution under Windows Control Panel with the Display properties Q What if get lost when I am making monitor adjustments A Simply press
24. updated version which fully supporting DDC CI interface Please try to download the most updated graphic adaptor driver from corresponding companies web site Install the driver Remove SmartControl and re install it once more RETURN TO TOP OF THE PAGE Installing Your LCD Monitor Front View e Produt Description connecting Front View Product Description to Your PC Getting Started Optimizing Performance To switch monitor s power on and off To access OSD menu Hot key of Contrast adjustment and To adjust OSD value up when OSD menu is active Hot key of Brightness adjustment and To adjust OSD value down when OSD menu is active Automatically adjust the horizontal position vertical position phase and clock settings RETURN TO TOP OF THE PAGE Rear View AC power input VGA input Kensington anti thief lock RETURN TO TOP OF THE PAGE Optimizing Performance For best performance ensure that your display settings are set at 1680x1050 60Hz Note To check the current display resolution press the OK button once The current display mode is shown on the OSD If the display setting is not optimized a warning string USE 1680x1050 FOR BEST RESULT appears in the OSD menu You can also install the Flat Panel Adjust FP Adjustment program a program for getting the best performance out of your monitor This is included on this CD Step by step instructions are provided to guide you through t
25. 02 03 BULGARIA LAN Service 140 Mimi Balkanska Str Office center Translog 1540 Sofia Bulgaria Tel 359 2 960 2360 Email office O lan service bg www lan service bg CZECH REPUBLIC Xpectrum Luzn 591 4 CZ 160 00 Praha 6 Tel 800 100 697 Email info xpectrum cz www xpectrum cz BOSNIA amp HERZEGOVINA Megatrend d o o Bosnia amp Herzegovina Dzemala Bijedica 2 11 BA 7100 Sarajevo Tel 387 33 613 166 Email info megatrend ba www megatrend ba CROATIA Renoprom d o o Ljubljanska 4 HR 10431 Sv Nedjelja Tel 385 1 333 0999 Email renoprom O renoprom hr www renoprom hr ESTONIA FUJITSU SERVICES OU Akadeemia tee 21G EE 12618 Tallinn Tel 372 6519900 www ee invia fujitsu com HUNGARY Profi Service Hungary K lso V ci ut 123 HU 1044 Budapest Tel 36 1 814 8080 Email ugyfelszolgalat psc hu www psc hu LATVIA ServiceNet LV Jelgavas iela 36 LV 1055 Riga Tel 371 7460399 Email serviss servicenet lv MACEDONIA AMC Computers kej Dimitar Vlahov bb MK 1000 Skopje Tel 389 2 3125097 www amc com mk LITHUANIA ServiceNet LT Gaiziunu G 3 LT 3009 KAUNAS Tel 370 7400088 Email servisas 6 servicenet It www servicenet lt ROMANIA Blue Ridge Int l Computers SRL 115 Mihai Eminescu St Sector 2 RO 020074 Bucharest Tel 40 21 2101969 Email tehnic blueridge ro www blueridge ro SERBIA amp MONTENEGRO Tehnicom Service d o
26. Hongyun Building No 501 Wuning road 200063 Shanghai P R China Phone 4008 800 008 Fax 21 52710058 HONG KONG Philips Electronics Hong Kong Limited Consumer Service Unit A 10 F Park Sun Building 103 107 Wo Yi Hop Road Kwai Chung N T Hong Kong Phone 852 26199663 Fax 852 24815847 INDIA Phone 91 20 712 2048 ext 2765 Fax 91 20 712 1558 BOMBAY Philips India Customer Relation Centre Bandbox House 254 D Dr A Besant Road Worli Bombay 400 025 CALCUTTA Customer Relation Centre 7 justice Chandra Madhab Road Calcutta 700 020 MADRAS Customer Relation Centre 3 Haddows Road Madras 600 006 NEW DELHI Customer Relation Centre 68 Shivaji Marg New Dehli 110 015 INDONESIA Philips Group of Companies in Indonesia Consumer Information Centre Jl Buncit Raya Kav 99 100 12510 Jakarta Phone 021 7940040 ext 2100 Fax 021 794 7511 794 7539 KOREA Philips Consumer Service Jeong An Bldg 112 2 Banpo dong Seocho Ku Seoul Korea Customer Careline 080 600 6600 Phone 02 709 1200 Fax 02 595 9688 MALAYSIA After Market Solutions Sdn Bhd Philips Authorised Service Center Lot 6 Jalan 225 Section 51 46100 Petaling Jaya Selangor Darul Ehsan Malaysia Phone 603 7954 9691 7956 3695 Fax 603 7954 8504 Customer Careline 1800 880 180 PAKISTAN Philips Consumer Service Mubarak manzil 39 Garden Road Saddar Karachi 74400 Tel 9221 2737411 16
27. Only eVCCI Class 2 Notice Japan Only eMIC Notice South Korea Only ePolish Center for Testing and Certification Notice eNorth Europe Nordic Countries Information eBSMI Notice Taiwan Only eErgonomie Hinweis nur Deutschland ePhilips End of Life Disposal Information for UK only Waste Electrical and Electronic Equipment WEEE China RoHS Troubleshooting Other Related Information Regulatory Information Model ID 220VW8 Model No HWS8220Q CE Declaration of Conformity Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards EN60950 1 2001 Safety requirement of Information Technology Equipment EN55022 1998 Radio Disturbance requirement of Information Technology Equipment EN55024 1998 Immunity requirement of Information Technology Equipment EN61000 3 2 2000 Limits for Harmonic Current Emission EN61000 3 3 1995 Limitation of Voltage Fluctuation and Flicker following provisions of directives applicable 73 23 EEC Low Voltage Directive 89 336 EEC EMC Directive 93 68 EEC Amendment of EMC and Low Voltage Directive and is produced by a manufacturing organization on ISO9000 level The product also comply with the following standards 1509241 3 I809241 7 1S09241 8 Ergonomic requirement for CRT Monitor 15013406 2 Ergonomic requirement for Flat Panel Display GS EK1 2000 GS specificatio
28. PHILIPS Philips LCD Monitor Electronic User s Manual ere safety and about this product installing your on screen customer care glossary download troubleshooting manual information monitor display and warranty amp print lt w E a lt gt us E we 2 lt LCD Monitor 220VW8 PHILIPS Safety Safety and Troubleshooting Information Precautions and Maintenance Installation Locations e FAQs WARNING Use of controls adjustments or procedures other than Troubleshooting AN Safety precautions and maintenance those specified in this documentation may result in exposure to shock Regulatory electrical hazards and or mechanical hazards Information Other Related Read and follow these instructions when connecting and using your computer monitor Information To protect your display from possible damage do not put excessive pressure on the LCD panel When moving your monitor grasp the frame to lift do not lift the monitor by placing your hand or fingers on the LCD panel Unplug the monitor if you are not going to use it for an extensive period of time Unplug the monitor if you need to clean it with a slightly damp cloth The screen may be wiped with a dry cloth when the power is off However never use alcohol solvents or ammonia based liquids Consult a service technician if the monitor does not operate normally when you have followed the instructions in this manua
29. Plug Detect MA 13 HSynormav 8 6 Redvideo ground 14 V Sync VCLK for DDC 7 Green video ground 15 Data clock line SCL 8 Blue video ground RETURN TO TOP OF THE PAGE Product Views Follow the links to see various views of the monitor and its components Front View Product Description RETURN TO TOP OF THE PAGE 1 Tilt 25 RETURN TO TOP OF THE PAGE e Product Features e Technical Specifications e Resolution amp Preset Modes Automatic Power Saving e Physical Specification e Pin Assignment e Product Views Philips Pixel Defect Policy Philips Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products We use some of the industry s most advanced manufacturing processes and practice stringent quality control However pixel or sub pixel defects on the TFT LCD panels used in flat panel monitors are sometimes unavoidable No manufacturer can guarantee that all panels will be free from pixel defects but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty This notice explains the different types of pixel defects and defines acceptable defect levels for each type In order to qualify for repair or replacement under warranty the number of pixel defects on a TFT LCD panel must exceed these acceptable levels For example no more than 0 0004 of the sub pixels on a 15 XGA moni
30. R G B each color hads 256 levels Thus total color can display is 256x256x256 16 7 million RETURN TO TOP OF THE PAGE H HDCP ready High Bandwidth Digital Content Protection HDCP is a copyright protection system that is incorporated into the DVI connector It helps stop unauthorized duplication of copyrighted content HDCP allows you to play protected content media such as movies and concerts It checks the signal to prevent piracy allowing only legal copies of content to display Hue The main attribute of a color that distinguishes it from other colors For example a color may have a green yellow or purple hue Color defined as having hue are know as chromatic colors White black and grays possess no hue RETURN TO TOP OF THE PAGE IPS In Plane Switching A technique of improving the viewing angle of an LCD where the liquid crystal molecules are switched in the plane of the LCD layer rather than vertical to it RETURN TO TOP OF THE PAGE L LCD liquid crystal display A display composed of liquid crystal suspended between two transparent sheets The display is composed thousands of pixels which can be turned on or off with electrical stimulation Thus colorful images texts can be generated Liquid crystal The compound found in liquid crystal displays Liquid crystal reacts predictably when electrically stimulated This makes it the ideal compound to turn LCD pixels on or off Liquid crystal is sometimes a
31. Website http www philips com support Country Austria Belgium Cyprus Denmark Finland France Germany Greece Ireland Italy Luxembourg The Netherlands Norway Portugal Spain Sweden Switzerland United Kingdom Telephone number 0820 901115 070 253 010 800 92256 3525 8761 09 2290 1908 08 9165 0006 0180 5 007 532 00800 3122 1223 01 601 1161 199 404 042 26 84 30 00 0900 0400 063 2270 8250 2 1359 1440 902 888 785 08 632 0016 02 2310 2116 0906 1010 017 Tariff 0 20 0 17 Free of Charge Local call tariff Local call tariff 0 23 0 12 Local call tariff Local call tariff 0 25 Local call tariff 0 20 Local call tariff Local call tariff 0 15 Local call tariff Local call tariff 0 15 Your Guarantee in Central and Eastern Europe Dear Customer Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards If unfortunately something should go wrong with this product Philips guarantees free of charge labor and replacement parts during a period of 36 months from date of purchase What is covered This Philips Guarantee in Central and Eastern Europe applies within Czech Republic Hungary Slovakia Slovenia Poland Russia and Turkey and only for monitors originally designed manufactured approved and or authorized for usage within these countries Warranty coverage begins as from the day you buy your monitor For 3 years thereafte
32. ach pixel to control the on off voltage It produces a brighter and sharper display with a broader viewing angle than a passive matrix display Also refer to TFT thin film transistor Amorphous silicon a Si A semiconductor material that is used to make the thin film transistors TFTs layer of an active matrix LCD Aspect ratio The width to height ratio of the active area of a display In general most monitors have an aspect ratio of 4 3 or 5 4 Wide monitors or TVs have an aspect ratio of 16 9 or 16 10 RETURN TO TOP OF THE PAGE Brightness The dimension of color that is referred to an achromatic scale ranging from black to white also called lightness or luminous reflectance Because of confusion with saturation the use of this term should be discouraged RETURN TO TOP OF THE PAGE C CCFL cold cathode fluorescent light These are the fluorescent light tubes providing the light for the LCD module These tubes are generally very thin approximately 2 mm in diameter Chromaticity That part of color specification which does not involve illuminance Chromaticity is two dimensional and specified by pairs of numbers such as dominant wavelength and purity CIE Commission International de l Eclairage The International Commission on Illumination the primary international organization concerned with color and color measurement Color temperature A measurement of the color of light radiated by an object while it
33. ar Customer Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards If unfortunately something should go wrong with this product Philips guarantees free of charge labor and replacement parts irrespective of the country where it is repaired during a period of 12 months from date of purchase This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a customer The Philips guarantee applies provided the product is handled properly for its intended use in accordance with its operating instructions and upon presentation of the original invoice or cash receipt indicating the date of purchase dealer s name and model and production number of the product The Philips guarantee may not apply if e the documents have been altered in any way or made illegible e the model or production number on the product has been altered deleted removed or made illegible e repairs or product modifications and alterations have been executed by unauthorized service organizations or persons e damage is caused by accidents including but not limited to lightning water or fire misuse or neglect Please note that the product is not defective under this guarantee in the case where modifications become necessary in order for the product to comply with local or nat
34. ational technical standards which apply in countries for which the product was not originally designed and or manufactured Therefore always check whether a product can be used in a specific country Just a click away In case of any problems we advise you to read the operating instructions carefully or go to the www philips com support website for additional support In order to avoid unnecessary inconvenience we advise you to read the operating instructions carefully before contacting our dealers or Information Centers In case your Philips product is not working correctly or is defective please contact your Philips dealer or directly the Website http www philips com support Consumer Information Centers Antilles e Argentina Astline e Australia Bangladesh Bosnia Herzegovina Brasil e Canada Chile China Colombia Belarus Bulgaria Croatia Czech Republic e Estonia Dubai Hong Kong Hungary India Indonesia Korea Latvia Lithuania e Macedonia Malaysia Mexico Morocco e New Zealand Pakistan e Paraguay Peru Philippines Poland Romania Russia Serbia amp Montenegro Singapore Slovakia Slovenia South Africa e Taiwan e Thailand Turkey Ukraine e Uruguay Venezuela Eastern Europe BELARUS Technical Center of JV IBA M Bogdanovich str 155 BY 220040 Minsk Tel 375 17 217 33 86 ASTLINE Petrus Brovky str 17 101 BY 220072 Minsk Tel 375 17 284
35. ations exposed to heat direct sunlight or extreme cold Avoid moving the LCD monitor between locations with large temperature differences Choose a site that falls within the following temperature and humidity ranges o Temperature 0 35 C 32 95 F o Humidity 20 80 RH Do not subject the LCD monitor to severe vibration or high impact conditions Do not place the LCD monitor in the trunk of a car Take care not to mishandle this product by either knocking or dropping it during operation or transportation Do not store or use the LCD monitor in locations where there is a high level of humidity or in dusty environments Do not allow water or other liquids to spill on or into the LCD monitor RETURN TO TOP OF THE PAGE Safety and FAQs Frequently Asked Questions Troubleshooting e General FAQs e Screen Adjustments General FAQs e Compatibility with Other Q When install my monitor what should do if the screen shows Cannot display this video Peripherals mode e LCD Panel Technology A Recommended video mode for Philips 22 1680x1050 60Hz e Ergonomics Ecology and 1 Unplug all cables then connect your PC to the monitor that you used Safety previously Standards 2 In the Windows Start Menu select Settings Control Panel In the Control Panel Window select the Display icon Inside the Display Control Panel select the Settings tab Under the setting tab in box labeled desktop e Regulatory area move the slidebar
36. bbreviated as LC Luminance A measure of the brightness or luminous intensity of light usually expressed in units of Candelas per square meter cd m2 or foot Lamberts 1 fL 3 426 cd m2 RETURN TO TOP OF THE PAGE N Nit A unit of luminance equal to 1 cd m2 or 0 292 ftL RETURN TO TOP OF THE PAGE P Pixel PiCture Element the smallest element on a computerized CRT or LCD image and hence a display Polarizer A light filter which only allows light waves of a certain rotation through Polarized material with perpendicular filtering is used in LCDs to enclose the liquid crystal The liquid crystal is then used as the medium which twists the light waves 90 in order to allow the light to pass through or not RETURN TO TOP OF THE PAGE R Refresh rate The number of times per second the screen is refreshed or redrawn This number is usually stated in Hz Hertz or cycles per second A rate of 60 Hz is equal to 60 tomes per second Response Time Response time is the period required for a liquid crystal cell to go from active black to inactive white and back to active black again It is measured in milliseconds Faster is better Lower response time means faster transitions and therefore results in fewer visible image artifacts in the display of fast moving images RETURN TO TOP OF THE PAGE S SmartControl PC software for fine tuning display performance and settings Philips offers users two choices for di
37. be more than 50 percent brighter than neighboring Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or off That is a dark dotis a sub pixel that stands out on the screen when the monitor displays a light pattern These are the types of black dot defects One dark sub pixel Two or three adjacent dark sub pixels Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable Philips also specifies tolerances for the proximity of pixel defects BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 2 adjacent lit subpixels Po Distance between two bright dot defects ACI Eden da mg 2 _ rr Toa bei do cs fes TOTAL DOT DEFECTS ACCEPTABLE LEVEL MODEL 220VW8 Total bright or black dot defects of all types 08 Note 1 or 2 adjacent sub pixel defects 1 dot defect Your Philips monitor is ISO13406 2 Compliant RETURN TO TOP OF THE PAGE e Product Information e Philips Pixel Defect Policy SmartManage Introduction SmartManage Features and Benefits e Philips SmartControl e Q amp A SmartManage amp SmartControl Selective Models martManag Introduction Philips SmartManage is an advanced solution for users corporate institution IT administrator in particular to manage their Philips monitors as part of the asset management environment The solution include
38. cent glass Therefore CRT monitors basically operate with an analog RGB signal A TFT LCD monitor is a device that displays an input image by operating a liquid crystal panel The TFT has a fundamentally different structure than a CRT Each cell has an active matrix structure and independent active elements A TFT LCD has two glass panels and the space between them is filled with liquid crystal When each cell is connected with electrodes and impressed with voltage the molecular structure of the liquid crystal is altered and controls the amount of inlet lighting to display images A TFT LCD has several advantages over a CRT since it can be very thin and no flickering occurs because it does not use the scanning method Q Why is vertical frequency of 60Hz optimal for an LCD monitor A Unlike a CDT monitor the TFT LCD panel has a fixed resolution For example an XGA monitor has 1024x3 R G B x 768 pixels and a higher resolution may not be available without additional software processing The panel is designed to optimize the display for a 65MHz dot clock one of the standards for XGA displays Since the vertical horizontal frequency for this dot clock is 60Hz 48kHz the optimum frequency for this monitor is 60Hz Q What kind of wide angle technology is available How does it work A The TFT LCD panel is an element that controls displays the inlet of a backlight using the dual refraction of a liquid crystal Using the property that th
39. d Vista is specified Performance as follows For Windows 95 Start Windows 95 Click on the Start button point to Settings and then click on Control Panel Double click on the Display Icon Select the Settings tab then click on Advanced Select the Monitor button point to Change then click on Have Disk Click on the Browse button select the appropriate drive F CD ROM Drive then click on the OK button Click on the OK button then select your monitor model and click on OK Click on the Close button DU E D N For Windows 98 Start Windows 98 Click on the Start button point to Settings and then click on Control Panel Double click on the Display Icon Select the Settings tab then click on Advanced Select the Monitor button point to Change then click on Next Select Display a list of all the drivers in a specific location so you can choose the driver you want then click on Next and then click on Have Disk 7 Click on the Browse button select the appropriate drive F CD ROM Drive then click on the OK button 8 Click on the OK button then select your monitor model and click on the Next button 9 Click on the Finish button then the Close button DU E D For Windows 2000 Start Windows 2000 Click on the Start button point to Settings and then click on
40. driver is installed Q3 The SmartControl functions well at the beginning but it is not workable what can do A If the following actions were executed the monitor driver may need to be re installed e Change video graphic adapter to another one e Update video driver e Activities on OS such as service pack or patch e Run Windows Update and updated monitor and or video driver e Windows was booted with the monitor power off or disconnected To find out please right click My Computer and click on Properties gt Hardware gt Device Manager If you see Plug and Play Monitor shows under Monitor then you need to re install Simply remove SmartControl and re install it Q4 After installing SmartControl when clicking on SmartControl tab nothing shows up after a while or a failure message shows what happened A It might be your graphic adaptor is not compatible with the SmartControl If your graphic adaptor is one of the above mentioned brands try to download the most updated graphic adaptor driver from corresponding companies web site Install the driver Remove SmartControl and re install it once more If it is still not working we are sorry that the graphic adaptor is not supported Please pay attention to Philips web site for any updated SmartControl driver available Q5 When I click on Product Information only partial information is shown what happened A It might be your graphic card adaptor driver is not the most
41. e projection of inlet light refracts toward the major axis of the liquid element it controls the direction of inlet light and displays it Since the refraction ratio of inlet light on liquid crystal varies with the inlet angle of the light the viewing angle of a TFT is much narrower than that of a CDT Usually the viewing angle refers to the point where the contrast ration is 10 Many ways to widen the viewing angle are currently being developed and the most common approach is to use a wide viewing angle film which widens the viewing angle by varying the refraction ratio IPS In Plane Switching or MVA Multi Vertical Aligned is also used to give a wider viewing angle Q Why is there no flicker on an LCD Monitor A Technically speaking LCDs do flicker but the cause of the phenomenon is different from that of a CRT monitor and it has no impact of the ease of viewing Flickering in an LCD monitor relates to usually undetectable luminance caused by the difference between positive and negative voltage On the other hand CRT flickering that can irritate the human eye occurs when the on off action of the fluorescent object becomes visible Since the reaction speed of liquid crystal in an LCD panel is much slower this troublesome form of flickering is not present in an LCD display Q Why is an LCD monitor virtually low of Electro Magnetic Interference Unlike a CRT an LCD monitor does not have key parts that generate Electro Magnet
42. e used as follows NOTE This icon indicates important information and tips that help you make better use of your computer system CAUTION This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data WARNING This icon indicates the potential for bodily harm and tells you how to avoid the problem Some warnings may appear in alternate formats and may not be accompanied by an icon In such cases the specific presentation of the warning is mandated by the relevant regulatory authority RETURN TO TOP OF THE PAGE 2007 Koninklijke Philips Electronics NV All rights reserved Reproduction copying use modification hiring renting public performance transmission and or broadcasting in whole or in part is prohibited without written consent of Philips Electronics NV Product Features Smartimage Lite Smart Response Lead free Product Technical Specifications Resolution amp Preset Modes Philips Pixel Defect Policy Automatic Power Saving Physical Specification Pin Assignment Product Views Physical Function SmartManage Product Information Product Features 220VW8 Designed for maximum productivity Big widescreen ideal for viewing two A4 pages side by side Display more images and content without scrolling Best total cost of ownership solution Empowered for Windows Vista Complies with RoHS standards to care fo
43. ed from the power supply socket which should be located near the equipment and easily accessible A protection mark B confirms that the equipment is in compliance with the protection usage requirements of standards PN 93 T 42107 and PN 89 E 06251 Wymagania Polskiego Centrum Badan i Certyfikacji Lrzadzemie powinno byt zasilane z grade z przybczonym obwodem ochronaym gmiasdo z Ws Judam ae 3ohg urzsdzenmia komputer monitor drukarka peowiniy by zasila 2 UU Instalarja elektryczna pomiessczena powinna zawierd e przewadz e fazowym rezeraxriwa achrane pred w postaci bezpeeczntk o wart sci znamianawe me wieksze ni 16A amper v W celu calkowitego wylaczenia urzadzenia z sieci zasilania nalezy wyj wtyczke kabla zasilajacego x endazdka poswinno srajdowad sig w poblizu urzadaenda b latwo dostepne nak bezpieczeirwa B potwierdza zgodnosc urzadzenmia lt wynspariami bezpiecze stwa uyikowearda zawartymi w PN I3 T 42107 1 PN B9 E 06251 Pozostale instrukcje bezpieczenstwa Nie males usywac wryezek adaplerowsch lub usuwad kolka obwodu ochrormego z wiycaki Je eli konseczne jest pracdluzacia vo nalezy us przediusaeza 3 zvlowegao z piawidloso patsceonyrm prezewoder oclo System kompulerowy nale y zabezpieczv prac nagimi chwilowym wzroslama lub spid kami napsecia uzywajac eliminalora przepece depasowujacego luh becrakloceniewega zasilania Na
44. el on an active matrix LCD RETURN TO TOP OF THE PAGE U USB or Universal Serial Bus The universal serial bus or USB is a standard protocol for linking PCs and peripherals Because it delivers high speed at a low cost USB has become the most popular method for connecting peripheral devices to a computer A USB 2 0 port located on a monitor directly in the user s line of sight provides easy high speed connectivity for USB devices at a convenient location RETURN TO TOP OF THE PAGE V Vertical refresh rate Expressed in Hz it is the number of frames complete pictures written to the screen every second RETURN TO TOP OF THE PAGE Download and Print Installing your LCD monitor driver Installing Your LCD monitor driver e Download and System requirements Printing Instructions e PC running Windows 95 Windows 98 Windows 2000 Windows Me Installing Windows XP Vista or later e FPadjust e Find your driver inf icm cat at Icd pc drivers Program Read the Readme txt file before installing This page provides an option to read the manual in pdf format PDF files can be downloaded into your hard disk then viewed and printed with Acrobat Reader or through your browser If you do not have Adobe Acrobat Reader installed click on the link to install the application Adobe Acrobat Reader for PC Adobe Acrobat Reader for Mac Download instructions To download the file 1 Click and hold your mouse ove
45. esh or reboot your PC and the problem can be solved by above procedures RETURN TO TOP OF THE PAGE LCD Panel Technology Q What is a Liquid Crystal Display A A Liquid Crystal Display LCD is an optical device that is commonly used to display ASCII characters and images on digital items such as watches calculators portable game consoles etc LCD is the technology used for displays in notebooks and other small computers Like light emitting diode and gas plasma technologies LCD allows displays to be much thinner than cathode ray tube CRT technology LCD consumes much less power than LED and gas displays because it works on the principle of blocking light rather than emitting it Q What differentiates passive matrix LCDs from active matrix LCDs A An LCD is made with either a passive matrix or an active matrix display grid An active matrix has a transistor located at each pixel intersection requiring less current to control the luminance of a pixel For this reason the current in an active matrix display can be switched on and off more frequently improving the screen refresh time your mouse pointer will appear to move more smoothly across the screen for example The passive matrix LCD has a grid of conductors with pixels located at each intersection in the grid Q What are the advantages of TFT LCD compared with CRT A In a CRT monitor a gun shoots electrons and general light by colliding polarized electrons on fluores
46. he installtion process Click on the link to know more about this program More about FP setup4 3 exe RETURN TO TOP OF THE PAGE 1 Put base on the desk and 2 Check if insertion ok insert whole unit into base vertically A SER N e AUT la a ZA uS 08 9 RUN IE e MP LA UE 2 3 Put whole unit horizontally Pull the slide switch to upside and lock cd mm d LIT Abel A l in Connecting to Your PC Front View Product Accessory Pack Description e Accessory Unpack all the parts Pack Connecting to Your PC Getting Started Optimizing RETURN TO TOP OF THE PAGE Connecting to Your PC 1 2 3 Cable management 4 Connect to PC YourLCD Getting Started Monitor e Front View Product Description Getting Started e Setting Up and Connecting Your Monitor e Getting Use the information file inf for Windows 95 98 2000 Me XP Vista or later The built in VESA DDC2B feature in Philips Monitors supports Plug amp Play requirements for Windows 95 98 2000 Me XP Vista This information file inf should be installed in order that your Philips monitor can be enabled from the Monitor dialog box in Windows Started 95 98 2000 Me XP Vista and the Plug amp Play application can be activated The installation Optimizing procedure based on Windows 95 OEM Release 2 98 2000 Me XP an
47. hocks or scratches Q How should clean the LCD surface A For normal cleaning use a clean soft cloth For extensive cleaning please use isopropyl alcohol Do not use other solvents such as ethyl alcohol ethanol acetone hexane etc Q Can I change the color setting of my monitor A Yes you can change your color setting through OSD control as the following procedures 1 Press OK to show the OSD On Screen Display menu 2 Press Down Arrow to select the option color then press OK to enter color setting there are five settings as below a Original this setting load the default panel setting in terms of color tone Note different panel maker may feature a different color temperature b 9300K this setting features the panel closed to blue white color tone c 6500K this setting features the panel closed to red white color tone d sRGB this is a standard setting for ensuring correct exchange of colors between different device e g digital cameras monitors printers scanners etc e User Define the user can choose his her preference color setting by adjusting red green blue color A measurement of the color of light radiated by an object while it is being heated This measurement is expressed in terms of absolute scale degrees Kelvin Lower Kevin temperatures such as 2004K are red higher temperatures such as 9300K are blue Neutral temperature is white at 6504K Q Can the Philips LCD Moni
48. ic Interference especially magnetic fields Also since an LCD display utilizes relatively low power its power supply is extremely quiet RETURN TO TOP OF THE PAGE Q What is the CE mark The CE Conformit Europ enne mark is required to be displayed on all regulated products offered for sale on the European market This CE mark means that a product complies with the relevant European Directive A European Directive is a European Law that relates to health safety environment and consumer protection much the same as the U S National Electrical Code and UL Standards Q Does the LCD monitor conform to general safety standards Yes Philips LCD monitors conform to the guidelines of MPR II and TCO 99 03 standards for the control of radiation electromagnetic waves energy reduction electrical safety in the work environment and recyclability The specification page provides detailed data on safety standards More information is provided in the section RETURN TO TOP OF THE PAGE e Safety and Troubleshooting e FAQs e Common Problems Imaging Problems Regulatory Information e Other Related Information Troubleshooting This page deals with problems that can be corrected by the user If the problem still persists after you have tried these solutions contact your nearest Philips dealer common Problems Having this problem Check these items No Picture Power LED not lit No Picture Power
49. ich is marked with the letter N or coloured BLACK 3 The BROWN wire must be connected to the terminal which marked with the letter L or coloured RED Before replacing the plug cover make certain that the cord grip is clamped over the sheath of the lead not simply over the three wires RETURN TO TOP OF THE PAGE Waste Electrical and Electronic Equipment WEEE Attention users in European Union private households This marking on the product or on its packaging illustrates that under European Directive 2002 96 EG governing used electrical and electronic appliances this product may not be disposed of with normal household waste You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection To determine the locations for dropping off such waste electrical and electronic contact your local government office the waste disposal organization that serves your household or the store at which you purchased the product RETURN TO TOP OF THE PAGE China RoHS The People s Republic of China released a regulation called Management Methods for Controlling Pollu tion by Electronic Information Products or commonly referred to as China RoHS All products including CRT and LCD monitor which are produced and sold for China market have to meet China RoHS request 3 Rol BETA CRF RF RHR CERA P B ARNRoHS 3 P HF Te P 9 59 Edo x k Ft 33 8
50. ion at the screen surface RETURN TO TOP OF THE PAGE Compatibility with other Peripherals Q Can I connect my LCD monitor to any PC workstation or Mac A Yes All Philips LCD monitors are fully compatible with standard PCs Macs and workstations You may need a cable adapter to connect the monitor to your Mac system Please contact your dealer retailer for more information Q Are Philips LCD monitors Plug and Play A Yes the monitors are Plug and Play compatible with Windows 95 98 2000 XP and Vista My monitor has no picture when connect to DVI I w analog signal on the PC via DVI D SUB cable after startup PC What should do A Try to change to DVI I w digital via DVI cable and re startup PC DVI I standard basically combines both analog and digital in single connector The monitor also contains two types of analog and digital EDID Digital EDID will set as the default and analog EDID will automatically change refer to analog signal This is likely that your PC read EDID type before making decision to send analog or digital from DVI I port However this compatibility limitation is rarely found on PC workstation or Mac Q What is USB Universal Serial Bus A Think of USB as a smart plug for PC peripherals USB automatically determines resources like driver software and bus bandwidth required by peripherals USB makes necessary resources available without user intervention There are three main benefits of USB
51. ional technical standards which apply in countries for which the product was not originally designed and or manufactured Therefore always check whether a product can be used in a specific country In case your Philips product is not working correctly or is defective please contact your Philips dealer In the event you require service whilst in another country a dealer address can be given to you by the Philips Consumer Help Desk in that country the telephone and fax number of which can be found in the relevant part of this booklet In order to avoid unnecessary inconvenience we advise you to read the operating instructions carefully before contacting your dealer If you have questions which your dealer cannot answer or any related question please contact the Philips Consumer Information Centers or via Website http www philips com Your Philips F1rst Choice Warranty USA Thank you for purchasing this Philips monitor All Philips monitors are designed and manufactured to high standards and deliver high quality performance ease of use and ease of installation Should en you encounter any difficulties while installing or using this product please BIR SI contact Philips directly to benefit from your Philips First Choice Warranty This mas three year service warranty entitles you to a swap model on site within 48 E gt hours of your call being received within the first year of purchase If you have w 3 Wot a
52. ity with Windows XP message please click on the Continue Anyway button Click on the Finish button then the Close button Click on the OK button and then the OK button again to close the Display Properties dialog box Start Windows Vista Click the Start button select and click on Control Panel Select and click on Hardware and Sound Choose Device Manager and Click on Update device drivers Select Monitor and then right click on Generic PnP Monitor Click on Update Driver Software Select Browse my computer for driver software Click the Browse button and choose the drive in which you ve placed the disk Example CD ROM Drive Lcd PC drivers Click the Next button Wait few minutes for installing the driver and then click Close button JO O1 gt IN gt o If your Windows 95 98 2000 Me XP Vista version is different or you need more detailed installation information please refer to your Windows 95 98 2000 Me XP Vista user s manual RETURN TO TOP OF THE PAGE Description of the On Screen Display The OSD Tree On Screen Display Description of the On Screen Display What is the On Screen Display On Screen Display OSD is a feature in all Philips LCD monitors It allows an end user to adjust screen performance or select functions of the monitors directly through an on screen instruction window A user friendly on
53. l The casing cover should be opened only by qualified service personnel Keep the monitor out of direct sunlight and away from stoves or any other heat source Remove any object that could fall into the vents or prevent proper cooling of the monitor s electronics Do not block the ventilation holes on the cabinet Keep the monitor dry To avoid electric shock do not expose it to rain or excessive moisture When positioning the monitor make sure the power plug and outlet are easily accessible If turning off the monitor by detaching the power cable or DC power cord wait for 6 seconds before attaching the power cable or DC power cord for normal operation To avoid the risk of shock or permanent damage to the set do not expose the monitor to rain or excessive moisture IMPORTANT Always activate a screen saver program during your application If a still image in high contrast remains on the screen for an extended period of time it may leave an after image or ghost image on front of the screen This is a well known phenomenon that is caused by the shortcomings inherent in LCD technology In most cases the afterimage will disappear gradually over a period of time after the power has been switched off Be aware that the afterimage symptom cannot be repaired and is not covered under warranty RETURN TO TOP OF THE PAGE Installation Locations Avoid exposure to heat and extreme cold Do not store or use the LCD monitor in loc
54. lezy upewnic sig aby noc toe le alo na kablach systernu kompalerowego oraz aby kalle nie umieszczone w miegscu aide mo na byloby na nie nadeprywad lub pukat sic o me Nie malexv roclewad napokra and plyn w ma system lompruberowy 5 nalezv wpychac sadnwch pre edit Er de abwez w system komputerowega guya move ba spowodowa podar lub perazenie podem poprzez zwarcie elemenkoa wewngtrznych system komputerowy pawirien znajdowa sig z dala od grzejnik w t 2ridel ciepla Paradha me nalezy blakewad abwordw wentylacyjnych un kac kl dzensa luznych papserira pes kampuber umieszczana komputera w Class ym miejscu bez mad alaa Sci cyrkulacy powi erza wok l niezo RETURN TO TOP OF THE PAGE North Europe Nordic Countries Information Placering Ventilation VARNING F RS KRA DIG OM ATT HUVUDBRYTARE OCH UTTAG R L T TKOMLIGA NAR DU STALLER DIN UTRUSTNING PAPLATS Placering Ventilation ADVARSEL SORG VED PLACERINGEN FOR AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILG ENGELIGE Paikka IImankierto VAROITUS SIJOITA LAITE SITEN ETTA VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA Plassering Ventilasjon ADVARSEL N R DETTE UTSTYRET PLASSERES DU PASSE AT KONTAKTENE FOR STOMTILFORSEL ER LETTE N RETURN TO TOP OF THE PAGE BSMI Notice Taiwan Only EE RETURN TOP OF THE PAGE Ergonomie Hinweis nur Deutschland Der von uns
55. livers audio output from external audio devices including a portable tape CD or MP3 player even when there is no video input SRGB SRGB is a standard for ensuring correct exchange of colors between different devices e g digital cameras monitors printers scanners etc Using a standard unified color space sRGB will help represent pictures taken by an SRGB compatible device correctly on your sRGB enabled Philips monitors In that way the colors are calibrated and you can rely on the correctness of the colors shown on your screen Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a predefined setting as well as the color gamut Therefore it is important to select the SRGB setting in the monitor s OSD To do so open the OSD by pressing the OK button on the side of your monitor Move the down button to go to Color and press OK again Use the right button to go to SRGB Then move the down button and press OK again to exit the OSD After this please do not change the brightness or contrast setting of your monitor If you change either of these the monitor will exit the SRGB mode and go to a color temperature setting of 6500K Other USB plug An upstream and a downstream USB plug is provide for user s convenience RETURN TO TOP OF THE PAGE T TFT thin film transistor Usually made from amorphous silicon a Si and used as a switch to a charge storage device located below each sub pix
56. lor shifting when working with image viewing or other multipurpose applications Where will it be effective 1 When you select Smartlmage Lite profiles from Smartlmage button certain preset profiles had configured proper SmartResponse setting a Internet SmartResponse will turn on with low level enhancement to reduce motion blur when scrolling web page b Video Playback SmartResponse will turn on with medium level enhancement to reduce motion blur c Gaming SmartResponse will turn on with high level enhancement to give gamer fastest LCD display response d Other profiles settings like Office Work Image Viewing and Off turn off SmartResponse to offer optimal color performance 2 You can also turn it on or off manually via OSD More Settings SmartResponse The default setting is off RETURN TO TOP OF THE PAGE Lead free Product Philips eliminated toxic substances like lead from its displays Lead free display helps protect your health and promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment Philips complies with the European Community stringent RoHS Directive mandating restrictions on hazardous substances in electrical and electronic equipment With Philips you can be confident that your display device does not harm the environment Technical Specifications PANEL Type LCD Screen size 22 55 8 cm diagonal Pixel Pitch 0 282 x
57. n prEN50279 1998 Low Frequency Electric and Magnetic fields for Visual Display MPR II MPR 1990 8 1990 10 Low Frequency Electric and Magnetic fields TCO 99 TCO 03 Requirement for Environment Labelling of Ergonomics Energy Ecology and Emission TCO Swedish Confederation of Professional Employees for TCO versions RETURN TO TOP OF THE PAGE Energy Star Declaration This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling DPMS standard This means that the monitor must be connected to a computer which supports VESA DPMS Time settings are adjusted from the system unit by software NUTEK VESA State LED Indicator Power Consumption Normal operation ON Active Green 45W TYP Power Saving Alternative 2 One step OFF Sleep Amber 1W Switch Off OFF 1W eFrequently Asked y Questions FAQs As an ENERGY STAR Partner PHILIPS has determined that this product meets the ENERGY STAR guidelines for energy efficiency ENERGY STAR A We recommend you switch off the monitor when it is not in use for a long time RETURN TO TOP OF THE PAGE Federal Communications Commission FCC Notice U S Only A This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a reside
58. ni aby ruseni odstranil RETURN TO TOP OF THE PAGE VCCI Notice Japan Only This is a Class B product based on the standard of the Voluntary Control Council for Interference VCCI for Information technology equipment If this equipment is used near a radio or television receiver in a domestic environment it may cause radio Interference Install and use the equipment according to the instruction manual Class B ITE EE O CCI E IA Bib E cC COREA CMS E BARE DRE Lie ERIC LT SMHS TRACP LEMAR b IR DNA do TE LR ONE LT FAN RETURN TO TOP OF THE PAGE MIC Notice South Korea Only Class B Device us BR AEA Ul Ba 2171 File 7428 dad 37 55 i4 qt e Ve 29449 143 Please note that this device has been approved for non business purposes and may be used in any environment including residential areas RETURN TO TOP OF THE PAGE Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit a three prong socket All equipment that works together computer monitor printer and so on should have the same power supply source The phasing conductor of the room s electrical installation should have a reserve short circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes A To completely switch off the equipment the power supply cable must be remov
59. nt then click on Next and then click on Have Disk Click on the Browse button select the appropriate drive F CD ROM Drive then click on the OK button Click on the OK button select your monitor model and click on the Next button Click on Finish button then the Close button For Windows XP Start Windows XP Click on the Start button and then click on Control Panel Select and click on the category Printers and Other Hardware Click on the Display Item Select the Settings tab then click on the Advanced button Select Monitor tab If the Properties button is inactive it means your monitor is properly configured Please stop installation If the Properties button is active click on Properties button Please follow the steps below Click on the Driver tab and then click on Update Driver button Select the Install from a list or specific location advanced radio button and then click on the Next button Select the Don t Search will choose the driver to install radio button Then click on the Next button Click on the Have disk button then click on the Browse button and then select the appropriate drive F CD ROM Drive Click on the Open button then click the OK button Select your monitor model and click on the Next button If you can see the has not passed Windows Logo testing to verify its compatibil
60. ntial installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help A Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device To prevent damage which may result in fire or shock hazard do not expose this appliance to rain or excessive moisture THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS RETURN TO TOP OF THE PAGE FCC Declaration of Conformity Trade Name Philips Responsible Party Philips Consumer Electr
61. onics North America P O Box 671539 Marietta GA 30006 0026 1 888 PHILIPS 744 5477 Declaration of Conformity for Products Marked with FCC Logo United States Only This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation RETURN TO TOP OF THE PAGE Commission Federale de la Communication FCC Declaration Cet quipement a t test et d clar conforme auxlimites des appareils num riques de class B aux termes de l article 15 Des r gles de la FCC Ces limites sont concues de facon fourir une protection raisonnable contre les interf rences nuisibles dans le cadre d une installation r sidentielle CET appareil produit utilise et peut mettre des hyperfr quences qui si l appareil n est pas install et utilis selon les consignes donn es peuvent causer des interf rences nuisibles aux communications radio Cependant rien ne peut garantir l absence d interf rences dans le cadre d une installation particuliere Si cet appareil est la cause d interf rences nuisibles pour la r ception des signaux de radio ou de t l vision ce qui peut tre d cel en fermant l quipement puis en le remettant en fonction l utilisateur pourrait essayer de corriger la situation en prenant les mesures suivantes R orienter
62. ormation contact the Philips Customer Care Center by calling 877 835 1838 U S A customers only or 919 573 7855 Before Requesting Service Please check your owner s manual before requesting service Adjustments of the controls discussed there may save you a service call TO GET WARRANTY SERVICE IN U S A PUERTO RICO OR U S VIRGIN ISLANDS Contact the Philips Customer Care Center phone number listed below for product assistance and procedures for servicing Philips Customer Care Center 877 835 1838 or 919 573 7855 In U S A Puerto Rico and U S Virgin Islands all implied warranties including implied warranties of merchantability and fitness for a particular purpose are limited in duration to the duration of this express warranty But because some states do not allow limitations on how long an implied warranty may last this limitation may not apply to you TO GET WARRANTY SERVICE IN CANADA Please contact Philips at 800 479 6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers In Canada this warranty is given in lieu of all other warranties No other warranties are expressed or implied including any implied warranties of merchantability or fitness for a particular purpose Philips is not liable under any circumstances for any direct indirect special incidental or consequential damages howsoever incurred even
63. ou d placer l antenne de r ception Augmenter la distance entre l quipement et le r cepteur Brancher l quipement sur un autre circuit que celui utilis par le r cepteur Demander l aide du marchand ou d un technicien chevronn en radio t l vision en matiere de conformit est susceptible d interdire l utilisateur l usage du 0 Toutes modifications n ayant pas recu l approbation des services comp tents pr sent quipement N utiliser que des c bles RF arm s pour les connections avec des ordinateurs ou p riph riques CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA RETURN TO TOP OF THE PAGE EN 55022 Compliance Czech Republic Only This device belongs to category B devices as described in EN 55022 unless it is epecrli cally stated that it is a Class A device on tha specification label The follcwirg applies to devices in Class of EN 55022 radius of protection up to 30 meters Tha user of tha device is obliged to take all stapa necessary to remove sources of interference to tala communication or other devices Pokud neni na typov m amp titku po ita e uvedeno e spad do do tidy A podle EN 55022 spad automaticky do tfidy podle EN 55022 Pro zafizeni zafazend do tidy A chrann p smo podle EN 55022 plati n amp sledujici Dojde li k ru eni telekormunika nich nebo nyoh zafizeni je u ivatel povinnen prov st takov opatfg
64. present pictures taken by an SRGB compatible device correctly on your sRGB enabled Philips monitors In that way the colors are calibrated and you can rely on the correctness of the colors shown on your screen Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a predefined setting as well as the color gamut Therefore it is important to select the SRGB setting in the monitor s OSD To do so open the OSD by pressing the OK button on the side of your monitor Move the down button to go to Color and press OK again Use the right button to go to SRGB Then move the down button and press OK again to exit the OSD After this please do not change the brightness or contrast setting of your monitor If you change either of these the monitor will exit the SRGB mode and go to a color temperature setting of 6500K RETURN TO TOP OF THE PAGE Customer Care amp Warranty PLEASE SELECT YOUR COUNTRY AREA TO REVIEW DETAILS OF YOUR WARRANTY COVERAGE WESTERN EUROPE Austria e Belgium Cyprus Denmark France Germany Greece Finland Ireland Italy Luxembourg the Netherlands Norway e Portugal Sweden Switzerland e Spain e United Kingdom EASTERN EUROPE Czech Republic Hungary Poland Russia Slovakia Slovenia Turkey LATIN AMERICA Antilles e Argentina Brasil e Chile e Colombia Mexico Paraguay Peru Uruguay Venezuela NORTH AMERICA Canada USA PACIFIC Au
65. r your monitor will be serviced in case of defects provided for under the warranty coverage What is excluded The Philips guarantee applies provided the product is handled properly for its intended use in accordance with its operating instructions and upon presentation of the original invoice or cash receipt indicating the date of purchase dealer s name and model and production number of the product The Philips guarantee may not apply if e the documents have been altered in any way or made illegible e the model or production number on the product has been altered deleted removed or made illegible e repairs or product modifications and alterations have been executed by unauthorized service organizations or persons e damage is caused by accidents including but not limited to lightning water or fire misuse or neglect e Reception problems caused by signal conditions or cable or antenna systems outside the unit e Defects caused by abuse or misuse of the monitor e Product requires modification or adaptation to enable it to comply with local or national technical standards which apply in countries for which the product was not originally designed manufactured approved and or authorized Therefore always check whether a product can be used in a specific country Please note that the product is not defective under this guarantee in the case where modifications become necessary in order for the product to comply with local or n
66. r the environment The lowest power consumption in the industry Outstanding front of screen performance WSXGA wide format 1680x1050 resolution for sharper display Great convenience Embedded power supply eliminates external power adaptors Adjust display serrings with hot key or on screen controls RETURN TO TOP OF THE PAGE Smartlmage Lite Selective Models Introduction Philips Smartlmage Lite features with Philips LightFrame technology to enhance your front of screen performance depend by content type It is changing brightness or contrast profiles to enrich color of image and sharpen text No matter your application is on text processing or watching image or video you can always get Selective Models best viewing experience from Philips Smartlmage Lite How to enable Smartlmage Lite 1 Press EP to launch the Smartimage Lite on screen display Keep press Ep to toggle between Office Work Internet Image Viewing Video Playback Gaming and Off The Smartlmage Lite on screen display will remain on screen for 5 seconds or you can also press OK to make confirmation When smartlmage Lite is enabled the sRGB scheme is disabled automatically To use SRGB you need to disable Smartlmage Lite with the Ep button at the front bezel of your monitor Except using Ep key to scroll down you can also press W A buttons to choose and press ok to confirm selection and close the Smartlmage Lite OSD There are six modes to be selected
67. r the icon below Windows 95 98 2000 Me XP Vista users right click Download 220VW8 pdf 2 From the menu that appears choose Save Link As Save Target As or Download Link to Disk 3 Choose where you would like to save the file click Save if prompted to save as either text or source choose source Printing instructions To print the manual 1 With the manual file open follow your printer s instructions and print the pages you need RETURN TO TOP OF THE PAGE Installing FPadjust Program The FP Adjust program generates alignment patterns which will help you adjust monitor settings such as CONTRAST BRIGHTNESS HORIZONTAL amp VERTICAL POSITION PHASE and CLOCK System requirements PC running Windows 95 Windows 98 Windows 2000 Windows Me Windows XP Vista or later To install FPadjust Program Click on the link or icon to install FPadjustment Program or Click and hold your mouse over the icon Win95 98 2000 Me XP Vista users right Click E FP setup4 3 exe Download E From the menu that appears choose Save Link As Save Target As or Download Link to Disk Choose where you would like to save the file click Save if prompted to save as either text or source choose source Exit your browser and install the FPadjust Program Read the FP_Readme04 txt file before installing RETURN TO TOP OF THE PAGE
68. s three essential components Philips SmartManage Administrator and Philips SmarControl and Agent Philips SmartManage is a solution joint developed by Philips and Altiris Inc SmartManage Features and Benefits The Philips SmartManage is a working console for IT management to gather monitors assets information run asset report control assets security monitor assets security and issue instant messages to monitor users Philips SmartManage includes the following major features Provides an additional security measure that helps corporate users safeguard their investment 2 Power saving feature that reduces utility costs and manpower required to turn monitors on or off 3 Provides an efficient means for adjusting monitor performance and settings 4 Built in asset reports reduce audit maintenance manpower cycle time and costs A trial version of SmartManage can be downloaded from http www altiris com philips For more information of Philips SmartManage please contact with Philips sales representatives in your country Philips SmartControl SmartManage is a software dedicated to business environments Personal users normally do not need to use SmartManage The SmartControl and SmartManage Agent are deployed and installed in computers using Philips monitors With SmartControl and SmartManage Agent monitors and PCs can interact with the administrator s inquiries Because SmartControl operates on individual PC end users
69. splay setting adjustment Either navigate the multilevel On Screen Display menu through buttons on the display itself or use the Philips SmartControl software to easily adjust the various display settings in a familiar way Smartlmage Lite Philips Smartlmage Lite features with Philips LightFrame technology to enhance your front of screen performance depend by content type It is changing brightness or contrast profiles to enrich color of image and sharpen text No matter your application is on text processing or watching image or video you can always get best viewing experience from Philips Smartlmage Lite SmartManage Built in advanced firmware that delivers audio output from external audio devices including a portable tape CD or MP3 player even when there is no video input SmartResponse SmartResponse is exclusive Philips technology that adjusts response time to application requirements delivering faster response times for gaming and videos or better color saturation for viewing photos and static images SmartTouch controls SmartTouch controls are intelligent ultra responsive touch sensitive icons that replace protruding buttons Responding to your lightest touch SmartTouch controls for example power up your monitor or brighten and sharpen your display with LightFrame When activated SmartTouch icons glow to indicate that your commands have been implemented Stand alone audio function Built in advanced firmware that de
70. stralia New Zealand ASIA Bangladesh e China Hong Kong India e Indonesia Japan Korea e Malaysia e Pakistan e Philippines Singapore Taiwan e Thailand AFRICA Morocco South Africa MIDDLE EAST Dubai Egypt Your Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor AIT Philips monitors are designed and manufactured to high standards and deliver high quality performance ease of use and ease of installation Should you encounter any difficulties while installing or using this product please contact the Philips helpdesk directly to benefit from your Philips First Choice Warranty This three year service warranty entitles you to a swap model on site if your monitor turns out to be faulty or defective Philips aims at a swap within 48 hours of your call being received What is covered The Philips F1rst Choice Warranty applies within Andorra Austria Belgium Cyprus Denmark France Germany Greece Finland Ireland Italy Liechtenstein Luxembourg Monaco the Netherlands Norway Portugal Sweden Switzerland Spain and the United Kingdom and only for monitors originally designed manufactured approved and or authorized for usage within these countries Warranty coverage begins as from the day you buy your monitor For three years thereafter your monitor will be swapped by at least an equivalent monitor in case of defects provided for under the warranty coverage The swap monitor remains
71. t are not originally designed manufactured approved and or authorized for usage within the Philips F1rst Choice countries do not apply to the Philips F1rst Choice Warranty In these cases the Philips global warranty terms are valid Just a click away In case of any problems we advise you to read the operating instructions carefully or go to the www philips com support website for additional support Just a phone call away In order to avoid unnecessary inconvenience we advise you to read the operating instructions carefully or go to the www philips com support website for additional support before contacting the Philips helpdesk To solve your problem quickly please prepare the following details before contacting the Philips helpdesk Philips type number Philips serial number Purchase date copy of purchase may be required PC environment Processor o 286 386 486 Pentium Pro Internal memory o Operating system Windows DOS OS 2 Apple Macintosh o Fax Modem Internet program e Other cards installed Having the following information available will also help speed up the process e Your proof of purchase indicating date of purchase dealer name model and product serial number e The full address to which the faulty monitor has to be collected and the swap model should be delivered Philips customer help desks are located worldwide Click here to access the First Choice Contact Information Or you can reach us via
72. tor be mounted on the wall A Yes Philips LCD monitors have this optional feature Four standard VESA mount holes on the rear cover allows the user to mount the Philips monitor on most of the VESA standard arms or accessories We recommend to contact your Philips sales representative for more information RETURN TO TOP OF THE PAGE Screen Adjustments Q What is the FPadjust program on the CD ROM A The FPadjust program generates alignment patterns that help you adjust monitor settings such as Contrast Brightness Horizontal Position Vertical Position Phase and Clock for optimal performance When install my monitor how do I get the best performance from the monitor A 1 For best performance make sure your display settings are set at 1680x1050 9 60Hz for 22 Note You can check the current display settings by pressing the OSD OK button once The current display mode is shown in OSD first page 2 To install the Flat Panel Adjust FPadjust program located on the monitor setup CD ROM open the CD ROM and double click the FP setup4 3 exe icon This will install FP Adjust automatically and place a shortcut on your desktop 3 Run FPadjust by double clicking the shortcut Follow the instructions step by step to optimize image performance with your system s video controller Q How do LCDs compare to CRTs in terms of radiation A Because LCDs do not use an electron gun they do not generate the same amount of radiat
73. tor may be defective Furthermore Philips sets even higher quality standards for certain types or combinations of pixel defects that are more noticeable than others This policy is valid worldwide subpixel SUbpixel subpixel y Y A pixel or picture element is composed of three sub pixels in the primary colors of red green and blue Many pixels together form an image When all sub pixels of a pixel are lit the three colored sub pixels together appear as a single white pixel When all are dark the three colored sub pixels together appear as a single black pixel Other combinations of lit and dark sub pixels appear as single pixels of other colors Pixels and Sub pixels Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways There are two categories of pixel defects and several types of sub pixel defects within each category Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit or That is a bright dot is a sub pixel that stands out on the screen when the monitor displays a dark pattern There are the types of bright dot defects Two adjacent lit sub pixels Red Blue Purple One lit red green or blue _ pad Green Three adjacent lit sub sub pixel Green Blue Cyan Light Blue pixels one white pixel dots while a green bright dot is 30 percent brighter than neighboring dots A A red or blue bright dot must
74. uct adjustment of customer controls on the product and installation or repair of antenna systems outside of the product product repair and or part replacement because of misuse accident unauthorized repair or other cause not within the control of Philips Consumer Electronics reception problems caused by signal conditions or cable or antenna systems outside the unit a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications incidental or consequential damages resulting from the product Some states do not allow the exclusion of incidental or consequential damages so the above exclusion may not apply to you This includes but is not limited to prerecorded material whether copyrighted or not copyrighted the model or production number on the product has been altered deleted removed or made illegible Where IS SERVICE AVAILABLE Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics In countries where Philips Consumer Electronics does not distribute the product the local Philips service organization will attempt to provide service although there may be a delay if the appropriate spare parts and technical manual s are not readily available Where CAN I GET MORE INFORMATION For more inf
75. ustomers in Canada and U S A This product may contain lead and or mercury Dispose of in accordance to local state and federal regulations For additional information on recycling contact www eia org Consumer Education Initiative RETURN TO TOP OF THE PAGE Information for UK only WARNING THIS APPLIANCE MUST BE EARTHED Important This apparatus is supplied with an approved moulded 13A plug To change a fuse in this type of plug proceed as follows 1 Remove fuse cover and fuse 2 Fit new fuse which should be a BS 1362 5A A S T A or BSI approved type 3 Refit the fuse cover If the fitted plug is not suitable for your socket outlets it should be cut off and an appropriate 3 pin plug fitted in its place If the mains plug contains a fuse this should have a value of 5A If a plug without a fuse is used the fuse at the distribution board should not be greater than 5A Note The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere How to connect a plug The wires in the mains lead are coloured in accordance with the following code BLUE NEUTRAL N BROWN LIVE L GREEN amp YELLOW EARTH E 1 The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the letter E or by the Earth symbol or coloured GREEN or GREEN AND YELLOW 2 The BLUE wire must be connected to the terminal wh
76. yours and Philips keeps the defective original monitor For the swap monitor the warranty period remains equal to that of your original monitor being 36 months as from the purchase date of your original monitor What is excluded The Philips F1rst Choice Warranty applies provided the product is handled properly for its intended use in accordance with its operating instructions and upon presentation of the original invoice or cash receipt indicating the date of purchase dealer s name and model and production number of the product The Philips F1rst Choice Warranty may not apply if e The documents have been altered in any way or made illegible e The model or production number on the product has been altered deleted removed or made illegible e Repairs or product modifications and alterations have been executed by unauthorized service organizations or persons e Damage is caused by accidents including but not limited to lightning water or fire misuse or neglect e Reception problems caused by signal conditions or cable or antenna systems outside the unit e Defects caused by abuse or misuse of the monitor e Product requires modification or adaptation to enable it to comply with local or national technical standards which apply in countries for which the product was not originally designed manufactured approved and or authorized Therefore always check whether a product can be used in a specific country Note that products tha

Philips LCD widescreen monitor 220VW8FB

Contents

Download Pdf Manuals

Related Search

Related Contents