Home

Cisco One Pre-Standard PoE Power Daughter Card

1. Multicast Management Support Offers Internet Group Management Protocol IGMP snooping in hardware for management support Memory Features 4 8 MB shared memory architecture that is shared across all ports SNMP Management Offers support for Simple Network Management Protocol SNMP Management Information Base MIB manageable via a MIB browser Cisco Pre standard Power over Ethernet optional EtherSwitch with the external power chassis or internal power supply upgrades can power Cisco IP Phones and wireless access points Gigabit Ethernet Support One or Two 1000BaseT Ports per EtherSwitch Allows external connections to other switches and Gigabit Ethernet file servers Required for intra chassis stacking of modules All contents are Copyright 1992 2007 Cisco Systems Inc All rights reserved This document is Cisco Public Information Page 3 of 11 Data Sheet Options e GE DCARD ESW This optional 1000BaseT Gigabit Ethernet port for NM 16ESW and NMD 36 ESW can be used for a gigabit connection for a file server or for intra chassis stacking of the Cisco EtherSwitch module Stacking is supported in Cisco IOS release 12 2 11 T and beyond e PPWR PS CHASSIS The power chassis is an external chassis that can support up to four 360W power supplies which can provide power over ethernet to Cisco phones or wireless access points This chassis can support up to 144 IP phones 10W per port or
2. 104 F 0 C to 0 C Nonoperating temperature 40 F to185 F 40 C t o 85 C o Regulatory Compliance Safety EMC Telecom Network Homologation When installed in a Cisco 2600 2800 3600 3700 3800 Router the Cisco EtherSwitch Network Module does not change the standards regulatory compliance safety EMC telecom network homologation of the router itself See data sheets for the Cisco 2600 2800 3600 3700 3800 routers at http www cisco com en US prod collateral routers ps259 product_data_sheet0900aecd80 OfaSbe htm http www cisco com en US prod collateral routers ps5854 ps5882 product_data_sheet090 Oaecd8016fa68 html http www cisco com en US products hw routers ps274 products_data_sheet09186a00800 91f6f html http www cisco com en US prod collateral routers ps282 product_data_sheet09186a0080 09203f html http www cisco com en US prod collateral routers ps5855 product_data_sheet0900aecd8 016a8e8 html Additional Information Cisco Etherswitch Portfolio Q amp A http www cisco com en US products ps5854 products_qanda_item0900aecd802a9470 sht ml All contents are Copyright 1992 2007 Cisco Systems Inc All rights reserved This document is Cisco Public Information Page 10 of 11 Data Sheet a e Cisco EtherSwitch Service Modules http www cisco com en US products ps5854 products data _sheet0900aecd8028d15f html e Cisco EtherSwitch HWICs http www cisco com en US products ps5854 produ
3. 16ESW PWR 1GIG One 16 port 10 100 EtherSwitch NM with Cisco pre standard Power over Ethernet and GE PPWR DCARD 16ESW One Cisco pre standard power over ethernet power daughter card for 16 port EtherSwitch NM NMD 36 ESW One 36 port 10 100 EtherSwitch High Density Service Module NMD 36 ESW PWR One 36 port 10 100 EtherSwitch HDSM with Cisco pre standard Power over Ethernet Power NMD 36 ESW 2GIG One 36 port 10 100 EtherSwitch HDSM with 2 GE 1000BaseT NMD 36 ESW PWR 2G One 36 port 10 100 EtherSwitch HDSM with Cisco pre standard Power over Ethernet and 2GE PPWR DCARD 36ESW One Cisco pre standard Power over Ethernet daughter card for 36 port EtherSwitch HDSM GE DCARD ESW One GE 1000BaseT daughter card for EtherSwitch Modules PPWR PS 360W One 48V 360W power supply for EtherSwitch Modules PPWR PS CHASSIS One power supply chassis for Cisco 48V 360W power supply PWR CHASSIS 360W One power supply chassis and 48V power supply for EtherSwitch CAB PPWR PS1 1 Connects 1 EtherSwitch power supply to 1 EtherSwitch Module CAB PPWR PS1 2 Connects 1 EtherSwitch power supply to 2 EtherSwitch Modules CAB PPWR PS2 1 Connects 2 EtherSwitch power supplies to 1 EtherSwitch Module Cisco EtherSwitch Network Modules are supported in the following platforms Table 3 Supported Platforms NM 16ESW NM 16ESW PWR NM NMD 36 ESW NMD 36 ESW PWR 16ESW 1GIG NM 16ESW PWR 1GIG NMD 36 ESW 2GIG NMD 36 ESW PWR 2GIG Cisco 2600 Series
4. less devices at lt 10W per port The external PPWR PS CHASSIS is for use with the Cisco 2600 and 3600 Series The 2800 3700 and 3800 Series internal power supply can be upgraded to provide Power over Ethernet and the external chassis is not used for these routers Also available is a custom cable that connects the power supply to the Cisco EtherSwitch Modules Cable options allowing for power supply redundancy are also available The power over ethernet works over standard Category 5 unshielded twisted pair UTP cable up to 100 meters and allows direct power instead of using wall power with a transformer This allows customers to use existing Category 5 UTP installations The Cisco EtherSwitch Module power over ethernet implementation passes the required U S and international safety regulations and compliance measures e NM 16ESW PWR and NMD 36ESW PWR The 16 and 36 port Ethernet switch modules with power daughter cards support 48V inline power of IP telephones when either purchased with an external power chassis or when used with an internal power supply This combination of components enables IP phones to be plugged into any EtherSwitch module port Also the integrated Cisco power over ethernet for the 10 100BaseTX autosensing ports provides DC power to devices that can accept power over traditional UTP cabling such as the Cisco 7900 Family of IP phones This allows a standard RJ 45 jack to be powered from this EtherSwitch module source rather
5. than having a separate plug into an AC wall outlet Delivery of 48V power must be made to the 16 port Ethernet switch This daughter card is required for power over ethernet An internal or external power supply is also required e PPWR PS 360W This single 360W power supply for the Cisco EtherSwitch module line power can be added to a power chassis or can added internally into the Cisco 3700 Series router to power additional IP phones or wireless access points Each power supply supplies up to 360W and can power up to 36 IP phones For the Cisco 2800 and 3800 Series an upgrade to the internal router power supply is required and the PPWR PS 360W is not used Example Solutions Figure 3 Typical Deployments Small Branch Data Only All contents are Copyright 1992 2007 Cisco Systems Inc All rights reserved This document is Cisco Public Information Page 4 of 11 Data Sheet Remote Branch 16 Port NM 16ESW Example No 1 Small Branch One 16 Port NW 16ESW Switch Speed 10 100 Single T1 E1 WAN Cisco 2800 3800 16 Port Switch in a Router Single Point for Remote Management 2800 3800 Headquarters Small Branch Data Only A Cisco EtherSwitch Network Module in a branch data deployment provides the flexibility of integrated routing and switching functions in one unit for low port densities This deployment provides high speed connections between individual desktops servers and other network resources in a single un
6. 16 port 10 100 EtherSwitch Network Module e NM 16ESW PWR7 One 16 port 10 100 EtherSwitch NM with Cisco pre standard PoE support e NM 16ESW 1GIG One 16 port 10 100 EtherSwitch NM with 1 GE 1000BaseT port e NM 16ESW PWR 1GIG One 16 port 10 100 EtherSwitch NM with Cisco pre standard PoE and GE e NMD 36 ESW One 36 port 10 100 EtherSwitch High Density Service Module e NMD 36 ESW PWR One 36 port 10 100 EtherSwitch HDSM with Cisco pre standard PoE e NMD 36 ESW 2GIG One 36 port 10 100 EtherSwitch HDSM with 2 GE 1000BaseT e NMD 36 ESW PWR 2G One 36 port 10 100 EtherSwitch HDSM Cisco pre standard PoE and 2GE 1 The external power supply option cannot be used with the Cisco 2800 or 3800 Series An upgrade to the internal power supply is required to provide power over Ethernet in these routers This 16 port version should be ordered only if you require Cisco pre standard Power over Ethernet POE To take advantage of this capability be sure to have or order an external power unit to support Power over Ethernet POE for the Cisco 2600 and 3600 or be sure to order the internal power supply upgrade when using the EtherSwitch Network module in combination with the Cisco 2800 3700 and 3800 Series 3 This 36 port version should be ordered only if you require Cisco pre standard Power over Ethernet POE To take advantage of this capability be sure to have or order an external power unit to support Power over Ethernet POE for the Cisc
7. Afiafi CISCO Data Sheet Cisco EtherSwitch Network Modules 16 and 36 Port 10 100 Ethernet Modules for Cisco 2600 2800 3600 3700 3800 Series Routers Figure 1 Cisco 16 Port and 36 Port EtherSwitch Network Modules The Cisco 16 and 36 port 10 100 EtherSwitch modules for Cisco 2600 2800 3600 3700 3800 series routers offer branch office customers the option to integrate switching and routing in one platform Combining robust Layer 3 flexible WAN routing with low density line rate Layer 2 switching the EtherSwitch modules provide straightforward configuration easy deployment and integrated management in a single platform The EtherSwitch options include a 16 port network module NM and a 36 port high density service module HDSM version The 36 port HDSM utilizes the extra capacity from the wider interface form factor available only on the Cisco 2851 3660 3700 and 3800 series routers to increase the maximum possible port densities The 16 port EtherSwitch NM is available for the Cisco 2600 2800 3600 3700 and 3800 series routers The combination of Cisco 2600 2800 3600 3700 and 3800 Series routers and the EtherSwitch modules utilize the powerful features available in both Cisco IOS software and Catalyst switching The EtherSwitch module hardware supports 802 1p Layer 2 prioritization while Cisco IOS software supports Layer 3 DiffServ and Class of Service CoS markings for critical business data Coupling Layer 2 3 prio
8. Yes No Cisco 2801 Series No No Cisco 2811 and 2821 Series Yes No Cisco 2851 Series Yes Yes Cisco 3620 and 3640 Series Yes No Cisco 3660 Series Yes Yes Cisco 3700 Series Yes Yes Cisco 3800 Series Yes Yes A maximum of two EtherSwitch Network Modules are supported in a Cisco Router HWIC 4ESW WIC 4ESW or HWIC D 9ESW can also be used in combination with the EtherSwitch network module A total of two EtherSwitch modules HWICs or NMs can be used in any router If multiple EtherSwitches are used in a single chassis external stacking is required 5 Can be used in an external power shelf with the Cisco 2600 or 3600 Series router or internally with the Cisco 3700 Series routers For Cisco 2800 and 3800 the internal router power supply should be swapped out for a new power supply with Power over Ethernet capabilities if Power over Ethernet is required examples of PoE enabled power supplies include PWR 2811 AC IP PWR 2821 51 AC IP PWR 3825 AC IP and PWR 3845 AC IP Only utilize the external power shelf with the Cisco 2600 and 3600 Series routers for all other supported routers an upgrade to the internal power supply is required All contents are Copyright 1992 2007 Cisco Systems Inc All rights reserved This document is Cisco Public Information Page 8 of 11 Data Sheet oT Cisco Etherswitch Modules are supported in IP Plus or above in Cisco IOS releases 12 2T Beginning with Cisco IOS 12 3 Mainline an
9. af liatas in ths Uiited States erat eor tain oiiae cuuntiies Ad other trademarks meritionad in this document or Woehelte are the properly of ther ssanecatie cum The way of the word perme does normaly a partnerstis ralationsahls herwnen Sisco and any other ccenparry C7IR Printed in USA C78 404638 01 07 07 All contents are Copyright 1992 2007 Cisco Systems Inc All rights reserved This document is Cisco Public Information Page 11 of 11
10. ates a process to intelligently auto configure the router to provide call processing backup redundancy for the IP phones in that office The Cisco EtherSwitch NM with the external power chassis provides IP Phone power and phone discovery for Cisco IP phones In addition the Cisco EtherSwitch NM supports automatic VLAN configuration for IP Phones The auxiliary VLAN feature allows network administrators to segment phones into separate logical networks even though the data and voice infrastructures are physically the same The phone discovery allows the EtherSwitch NM 16ESW PWR to automatically detect the presence of an IP phone and supplies Cisco pre standard power over Ethernet For more information on the voice features for the Cisco 2600 2800 3600 3700 and 3800 series routers visit e Cisco 2600 Series http www cisco com en US products hw routers ps259 index html e Cisco 2800 Series http www cisco com en US products ps5854 index html e Cisco 3600 Series http www cisco com en US products hw routers ps274 index html e Cisco 3700 Series http www cisco com en US products hw routers ps282 index html e Cisco 3800 Series http www cisco com en US products ps5855 index html 4 For 802 3af power over Ethernet support one of the newer EtherSwitch Service Modules NME 16ES 1G P NME 23ES 1G P or NME XD 48ES 2S P or one of the EtherSwitch HWICs HWIC 4ESW POE or HWIC D 9ESW POE are recommended All contents are C
11. cilities management solution The Cisco DCN solution can be deployed using Cisco routers and Catalyst switches and delivers an out of band network used by service providers and large enterprises for managing their primary network By integrating the routing and switching functionality into one form factor service providers and enterprises can achieve a cost effective solution for their facilities management monitoring and billing applications The benefit is the reduction in valuable floorspace use as well as the advantages of reduced management maintenance and training costs Software for the Cisco Etherswitch Network Modules The Cisco 16 port EtherSwitch NM and 36 port EtherSwitch HDSM are supported on Cisco IOS Software release 12 2 8 T and greater versions Table 2 gives software requirements for the Cisco IOS 2600 2800 3600 3700 3800 Series Software Table 3 gives memory requirements and Table 4 gives product numbers and descriptions Table 2 Product Number and Description All contents are Copyright 1992 2007 Cisco Systems Inc All rights reserved This document is Cisco Public Information Page 7 of 11 Data Sheet oT Product Numbers Description NM 16ESW One 16 port 10 100 EtherSwitch Network Module NM 16ESW PWR One 16 port 10 100 EtherSwitch NM with Cisco pre standard Power over Ethernet support NM 16ESW 1GIG One 16 port 10 100 EtherSwitch NM with 1 GE 1000BaseT port NM
12. cts data sheet0900aecd8016bf0b html Prr iea HAASTE fata Soltis TOTARI East hese Suen SRI io Cac Bygone lee IS Bree majong SY 170 Wheat iaman Gein IEG REDEN Ra Haate Darga z li gil iy Car Soph ae Rea HALO TCay RE Hawterbergwmy 1948 JSA Sipgacures RSS 2 44th CH Anai g l EA g SKa waMiamMicany aT RCS COM Tray Meiemaa Se We ee Te EON i BRR TIP sunigurecacicancnt BUO SSS waa Set 5 Pee A POPPE Tee DSTORE DIOR Ua Gieco has mors than AN offices worldwide Addresses phone numbers and fax numbers are listed an the Ciscoe Wansite ak www cisca com go aifices AN Cisco yremo ine Ali rights reserved CAVE the lees logs end the Gisco Squane Srkiga kog ane weckmarn of Gino Seneng ka Chenging mo Way We Wuk Las Fand Lean ea saculos mark of Cuco Quatemy res ond Actiwss Rogister Aironet SPX Gatulyst CUDA CCDS OOH COP CONA CONF OCSR Casco the Ciscu Canifion Intanetwork Expert loya Cisco KIS Ciace Prass Cacy System Disco Systm Capita the Dieco Syriana ago Giasco Unigy Entwpr se Solver SiherGhannel ErhaFast Eiheriwiith Rast Sup Follow MMe Browning FonnSinem Sigadrive Gigai Hoel ink tend Quotient OS Para PTY O oration tia IR logs O Not Reedingsr Scorenesd Quick Shing Lighten Linkaya MecinigFizos MG Menvoridsg Acadamy Ariwa k Rogine Packet POC AroConnest Rama SorikSham SideOes SMART Stack yice Ths Fastowt Wey ip Tecreees Your Herel uctient and TamsAath are toghi baderna ke of Cieee System iro andfor ite
13. d 12 3T the Cisco Etherswitch modules are supported in IP Base or above For clarification on the various offered feature sets go here http www cisco com en US products sw iosswrel ps5460 index html Table 4 Software Requirements Minimum Supported Cisco IOS Release NM 16ESW NM 16ESW PWR NM NMD 36 ESW NMD 36 ESW PWR 16ESW 1GIG NMD 36 ESW 2GIG Cisco 2600 Series 12 2 8 T Not supported Cisco 2811 21 Series 12 3 8 T Not supported Cisco 2851 Series 12 3 8 T 12 3 8 T Cisco 3620 and 3640 Series 12 2 8 T Not supported Cisco 3660 Series 12 2 8 T 12 2 8 T Cisco 3700 Series 12 2 8 T 12 2 8 T Cisco 3800 Series 12 3 11 T 12 3 11 T All contents are Copyright 1992 2007 Cisco Systems Inc All rights reserved This document is Cisco Public Information Page 9 of 11 Data Sheet Specifications Standards network protocols Ethernet IEEE 802 3 10BaseT Fast Ethernet IEEE 802 3u 100BaseTX Fast Ethernet IEEE 802 3 100BaseFX IEEE 802 1D Spanning Tree Protocol IEEE 802 1p CoS IEEE 802 1Q VLAN Gigabit Ethernet IEEE 802 3z IEEE 802 3x IEEE 802 3ab Dimensions and Weight of NU 16ESW and NM 16ESW PWR Dimensions H x W x D 1 55 x 7 10 x 7 2 in o Weight 2 lb maximum Dimensions and Weight of PPWR PS CHASSIS Dimensions H x W x D 17 1 X 3 50 X 12 in o Weight 11 lb maximum o Environmental o Operating humidity 5 to 95 noncondensing Operating temperature 32 F to
14. it for Layer 2 and allows WAN connection at Layer 3 through the router The Cisco EtherSwitch NM and Cisco 2800 router also provide an ideal solution for Cisco 2505 2507 and 2516 users whose requirements have expanded beyond the existing Cisco 2500 Router hub capabilities Figure 4 Typical Deployment Small Branch Data and IP Phones using Cisco 2600 2800 3600 3700 and 3800 Series Routers Remote Branch 16 Port NM 16ESW PWR Cisco 2600 3600 gt PWR CHASSIS 360W AMK External Example No 2 Small Branch with IP Phones One 16 Port NM 16ESW PWR with Power One PWR CHASSIS 360W External Power Unit 16 Port Switch in a Router with In Line Power Single Point for Remote Management SRS Telephony for Call Processing Redundancy Headquarters All contents are Copyright 1992 2007 Cisco Systems Inc All rights reserved This document is Cisco Public Information Page 5 of 11 Data Sheet oT Small Branch Data and IP Phones The Cisco EtherSwitch Network Module combined with analog or digital voice modules for the Cisco 2600 2800 3600 3700 and 3800 routers provide a small branch office infrastructure for IP Telephony deployments This solution can be combined with Cisco CallManager IP Telephony and the Cisco IOS Survivable Remote Site Telephony SRS Telephony solution SRS Telephony runs on the local branch office router allowing it to automatically detect a failure in the network and initi
15. o 3660 or be sure to order the internal power supply upgrade when using the EtherSwitch Network module in combination with the Cisco 2851 3700 and 3800 Series All contents are Copyright 1992 2007 Cisco Systems Inc All rights reserved This document is Cisco Public Information Page 2 of 11 Data Sheet a Options e PPWR PS CHASSIS One power supply chassis for Cisco 48V 360W power supply e PWR CHASSIS 360W One power supply chassis and 48V power supply for EtherSwitch e PPWR PS 360W One 48V 360W power supply for EtherSwitch Modules e PPWR DCARD 16ESW One Cisco pre standard PoE daughtercard for 16 port EtherSwitch NM e PPWR DCARD 36ESW One Cisco pre standard PoE daughtercard for 36 port EtherSwitch HDSM e GE DCARD ESW One GE 1000BaseT daughtercard for EtherSwitch Modules Features and Benefits Table 1 Features and Benefits of Cisco EtherSwitch Modules Features Benefits 16 36 10BaseT 100BaseTX Ports Delivers up to 200 Mbps of bandwidth full duplex Layer 2 forwards and filters backflow at full wire speed on each port Autosensing on each port Detects the speed of the attached device and automatically configures the port for 10 or 100 Mbps operation Integrated Switching Provides fewer points of management for remote and small branch offices Support for 802 1P QoS Supports QoS based on the Institute of Electrical and Electronics Engineers IEEE class of service CoS and
16. opyright 1992 2007 Cisco Systems Inc All rights reserved This document is Cisco Public Information Page 6 of 11 Data Sheet Figure 5 Typical Deployment Small Branch Data and IP Phones Remote Branch _ ioe 36 Port NM 36ESW PWR C PSTN 7 Cisco 3700 x 77 SRo RA Internal PPWR PS 360W Example No 3 Small Branch EtherSwitch and IP Phones One 36 Port NM 36ESW PWR Power Version One PPWR PS 360W Internal Power Unit for 3700 36 Port Switch in a Router with In Line Power Single Point Remote Management SRS Telephony Call Processing Redundancy Headquarters Small Branch Data and IP Phones with 3700 and 3800 Series In this example we maintain all the features of Figure 4 above but we have now used the internal IP Phone Power capabilities from the Cisco 2851 3700 and 3800 series and added the 36 port EtherSwitch HDSM The Cisco EtherSwitch HDSM combined with analog or digital voice modules for the Cisco 2851 3700 and 3800 routers provide a small branch office infrastructure for IP Telephony deployments at a higher port density This solution can also be combined with Cisco CallManager IP Telephony and the Cisco IOS Survivable Remote Site Telephony SRS Telephony solution Data Communications Networks DCN Another unique application of the Cisco EtherSwitch NM with Cisco 2600 2800 3600 3700 and 3800 Series routers is in a Cisco DCN Data Communications Network operations and fa
17. port based prioritization allowing the switch to change the CoS settings of tagged packets on a per port basis 802 1Q Trunking Allows the setup of separate VLANs with tagged and untagged framing trunking is used to save ports when creating a link between two devices implementing VLANs 802 1D Spanning Tree a Layer 2 link management protocol that provides path redundancy while preventing undesirable loops in the network Simplifies network configuration and improves fault tolerance Voice Virtual LAN VLAN feature for IP Phones Enables phones to be placed into their own VLANs without the need for end user intervention a user can plug the phone into the switch and the switch provides the phone with the necessary VLAN information Port Based Reclassification for Queues on each 10 100 that are Configurable using a Weighted Round Robin WRR Scheduler Enables users to prioritize mission critical traffic such as VoIP and IP based video applications over regular traffic Media Access Control MAC Based Port Level Security Prevents unauthorized stations from accessing the switch Cisco fully supports the entire set of Requests for Comments RFCs Multifunction LEDs per Port for Port Status Provide a comprehensive and convenient visual management system Cisco IOS Command Line Interface CLI Provides configuration through Cisco IOS CLI and provides common user interface for all the router functions
18. ritization techniques with the QoS for the WAN this integrated routing and switching combination ensures low latency for critical business applications The Cisco EtherSwitch modules includes 10 100 switched Ethernet ports with options for Cisco pre standard power over ethernet and Gigabit Ethernet Features such as port autosensing QoS and VLAN support from 802 1p and 802 1Q standards and 802 1D Spanning Tree protocols are standard on the EtherSwitch modules All contents are Copyright 1992 2007 Cisco Systems Inc All rights reserved This document is Cisco Public Information Page 1 of 10 Data Sheet a The Cisco 16 and 36 port EtherSwitch modules are available with optional Cisco pre standard Power over Ethernet and Gigabit Ethernet support EtherSwitch bundles are available with these options pre installed for easy ordering The integrated power over ethenet supports Cisco IP phones and Cisco Aironet wireless access points An external power supply is needed for this feature in Cisco 2600 3600 platforms An Internal power supply option is available on the Cisco 2800 3700 and 3800 Series For 802 3af power over Ethernet support one of the newer EtherSwitch Service Modules NME 16ES 1G P NME 23ES 1G P or NME XD 48ES 2S P or one of the EtherSwitch HWICs HWIC 4ESW POE or HWIC D 9ESW POE are recommended Figure 2 Cisco 3725 and 3745 Series Platforms with EtherSwitch Modules Cisco EtherSwitch Module Summary e NM 16ESW One

Cisco One Pre-Standard PoE Power Daughter Card

Contents

Download Pdf Manuals

Related Search

Related Contents