Brother LT-26CL lower tray unit
Contents
1. 7 Loosen the locking clip thumbscrew on the left side of the Lower Tray Unit by rotating it counterclockwise Rotate the locking clip and hook it onto the printer so that it hangs down and then secure it with the thumbscrew 8 Insert the connection cable into the printers connector HOW TO INSTALL THE LOWER TRAY UNIT LT 26CL 9 Pull out the Upper Paper Cassette and then connect the Lower Tray Unit with the printer by sliding the locking clip to the right on the top surface of the Lower Tray Unit 10 Install the right hand side cover into the right side of the Lower Tray Unit by first fitting the hook at the front Install the left hand side cover by fitting the hole at the rear side of the side cover to the shaft of the Lower Tray Unit Close the side cover by fitting the notch to the hook of the Lower Tray Unit 11 To level the tray unit adjust the Anchor Feet located at the front and rear on the right hand side at the bottom of the Lower Tray Unit The Anchor Foot moves up and down as it is turned Itis correctly adjusted when the Anchor Foot touches the work surface and the tray unit is level Turn the lock screw to secure the Anchor Foot Note Do not load Transparencies Labels and Envelopes in the cassette installed into the optional Lower Tray Unit It may cause paper jams2. HOW TO INSTALL THE LOWER TRAY UNIT LT 26CL How To INSTALL THE LOWER TRAY Unit LT 26CL Warning This printer is heavy and weighs approximately 39kg 86 Ibs To avoid injury when moving or lifting this printer be sure to use at least two people When you lift the printer be sure to use the handholds located at the bottom four corners of the printer Caution When moving or lifting this printer be sure to keep the printer flat To avoid spills you must first remove the Toner Cartridges Waste Toner Pack Oil Bottle and Fusing Unit 1 Turn the printer off and unplug the power cord from the AC outlet 2 Place the Lower Tray Unit on a flat table and then remove the protective parts HOW TO INSTALL THE LOWER TRAY UNIT LT 26CL 3 Pull out the Paper Cassette from the Lower Tray Unit and then remove the tapes and the protective parts inside of the Cassette Install the Paper Cassette into the Lower Tray Unit 4 Pull out the connection cable located at the left rear side of the Lower Tray Unit 5 Check the two alignment pins on the Lower Tray Unit Use two people to lift the printer and place it onto the Lower Tray Unit Be sure to use the handholds located at the bottom four corners of the printer Check to ensure that the pins are correctly aligned into the printer HOW TO INSTALL THE LOWER TRAY UNIT LT 26CL 6 Remove the connector cover from the base cover at the left side of the printer
Download Pdf Manuals
Related Search