Home

LG VR64604LV

Contents

1. 2 Carefully clean it with warm water 3 Use the Mop after completely drying it in direct sunlight ly O V f the Mop is used in a damp or wet state it will cause TAN the Robot Cleaner to malfunction o Tip e To avoid product malfunction only use the ultra microfiber mop provided with the Robot Cleaner e Additional microfiber mops can be purchased by visiting a nearby LG Electronics service center 35 TROUBLESHOOTING Upon a voice message The wheels are not touching the floor Please move Roboking onto flat floor A warning message will be given if a wheel does not contact the floor surface for any reason e ls a wheel trapped in the front door balcony stairway etc gt Move the Robot Cleaner on to the flat floor Upon a voice message Please remove foreign material on the left right wheel e ls any foreign material wound around the wheel gt Turn off the main power switch on the rear side of the Robot cleaner Then lay a soft cloth on the floor turn over the Robot Cleaner and put it on the cloth Remove foreign material after observing the wheels Please make sure to remove the dust bin before turning over the main body Otherwise the dust in the dust bin may fall out Upon a voice message Roboking cannot continue cleaning Please check the area around Roboking A warning message will be given if Robot Cleaner cannot go on cleaning due to any unfavourable
2. Failure to follow this warning can cause fire or product failure Make sure the power cord of the home station is not crushed under a heavy object or damaged by contact with sharp objects COHORT CEH EEEEDO EHS S OOH SOOO EOEH SEO DSOODEEOOEEE Failure to follow this warning can cause electric shock fire or product failure If the power cord is broken do not plug it in Take the product to an LG Electronics Authorised service repairer Do not place the home station and the Robot Cleaner near a heating device CORES ECE HOSE HE OEHE EEE EO OSOSEHOSEHE OES OEEEEOEEOEES Doing so can cause product deformation fire or product failure Do not force the power plug to bend Do not use the power plug when it has been damaged or loosened Co eeereeecrceeresenesceceesereseressereseneseooeeeee product failure Do not touch the power plug with wet hands Doing so can cause electric shock Never use the Robot Cleaner with a battery and or home station from any other product than the Robot Cleaner COoee oOo eee EE EOE EEE EEE ESEDETEDEHES ORE SES EEESOSEEOE Doing so can cause fire or product failure Do not use the Robot Cleaner when candles or fragile objects are placed on the floor COPS CO TEESE OSEHHH TE EEEOSETEHEEESETES HOE EEEOSOEES Doing so can cause fire or product failure Always use a dedicated power outlet with a 10 amp rating Soccer eserecsenesoreseeeseseseDeseseEeeee
3. LG Life s Good OWNER S MANUAL ROBOKING Before using please carefully read the Safety Precautions pages to allow for safe operation of the product After reading this manual please keep it in an easily accessible location VR626 Ser VR64 Ser VR62 Ser VR646 Ser lll www lg com MFL67680009 FEATURES Corner Master By having adopted a brand new concept design that is appropriate for walls the Robot Cleaner s cleaning performance is incredibly efficient Learning Mode The Robot Cleaner is capable of memorizing the cleaning environment via its Smart Operation feature for smarter cleaning Turbo Mode In the Turbo mode the Robot Cleaner operates the suction motor and the brushes at a greater speed giving cleaner results When selected the Turbo mode is automatically activated on carpets which enables the Robot Cleaner to run more efficiently Drawer Mop Plate Option The Drawer mop plate makes it much easier for users to fit and remove the mop without having to turn over the device My Space Mode By commanding it to clean a particular area the Robot Cleaner quickly cleans that desired area Repeat Cleaning The Robot Cleaner will continuously clean until the battery runs out Location Search Function If the Robot Cleaner is moved from a spot while operating the device will automatically search f
4. e Please close any balcony doors as the wheels may get stuck while cleaning Loading the remote controller battery 1 Open the battery cover by lifting the rear hook of the remote controller 2 Insert two AAA batteries checking for nodes while loading 3 Close the battery cover completely so that the batteries will not fall out Precautions while using the remote control e Only press one button at a time e Do not drop or subject it to any impact e Do not store it near devices that give off heat fire or hot air e Certain fluorescent lamps such as the three band radiation lamp can interfere with the activation of the remote control Therefore use it as far away as possible from such lamps e If the remote control is far from the Robot Cleaner when activated it may fail to operate properly Use the remote within 3 m of the Robot Cleaner if possible 13 OVERVIEW Install the home station p15 7 Insert the power cord plug into an outlet and locate the station against a wall If power is not supplied to the home station the Robot Cleaner will not charge Turn on the power supply of the Robot Cleaner p16 Turn ON the power switch on the rear left of Robot Cleaner and press the Start Stop button on the top If the power supply is not turned on refer to page 16 Check the dust bin 3 Check the cleanness of the dust bin before starting cleaning and close the dust bin compartment c
5. gt Check whether there is foreign material blocking the suction port Page 32 gt Empty the dust bin Page 30 gt Clean the dust bin filter Page 31 gt Confirm that the dust bin has been mounted properly gt Confirm that the dust bin filter has been mounted properly Page 31 gt Check whether foreign material is caught in the brush Page 32 gt Confirm that the power switch is turned on Page 16 gt Confirm that the battery has been charged Page 19 gt Clean the brush Page 32 gt Confirm that the brush has been mounted properly Page 32 gt Carefully wipe the sensors with a dry soft cloth Page 33 gt f the ultra microfiber mop is attached confirm that it is mounted properly Page 26 gt Turn the main power switch off and on gt Replace the remote control batteries Page 13 gt Confirm that the control is within the coverage area of the main unit which is less than 3 m Page 13 gt Check whether the main power switch is turned on Page 16 39 PRODUCT SPECIFICATIONS Item Model External Dimensions LG Robot Cleaner VRG2 Sern VRO2Z6 Sen VR64 Ser VR6O46 Ser 340 mm x 340 mm x 89 mm Weight 3 kg Power Consumption 13 W Battery Fully Charging DC 16 8 V Traveling Velocity 350 mm s Maximum Use Time Approx 100 minutes Based on general wooden floor Charging Time 3 hours Main Functions Item Model External
6. the travel path of the Robot Cleaner will not be obstructed Fixing hook of power cord 3 Fix the home station against the wall so that it does not move Then turn on the power switch 1 Y Z Z ai rf yj SUITE 4 When the remote controller is not used store it in the remote controller holder on the home station Tip e Always keep the home station plugged in when in use If the home station is not plugged in the Robot Cleaner will not return to the station to charge automatically lt Warning gt Do not operate the Robot Cleaner if the Home Station has a damaged cord or plug if it is not working properly or if it has been damaged or dropped To avoid electrical hazards the cord must be replaced by LG Electronics Inc or a qualified service person HOW TO TURN THE ROBOT CLEANER POWER SUPPLY ON amp OFF Turning on the main power supply Make sure the Power Switch is on at the rear left of the Robot Cleaner If the power is OFF turn the switch ON When turning on the power switch do not press or touch any button located on the upper section of the Robot Cleaner Button operations can be delayed Turn off the power switch if the Robot Cleaner is not used for a long period of time in order to protect the battery The Robotic Cleaner cannot charge if the main switch is in the OFF position Turning on from Stand By power With the Standby power of the Robot Cleaner OFF press Start S
7. Clock button on the Remote Controller when the Robot Cleaner is in standby mode will start the clock setting mode Set the hour by using A V buttons on Remote Controller Flickering yam Set the minutes using A V buttons Sela byung lt b 1 1 Am on Remote Controller D buttons on the Remote N E Controller Flickering Wiji Set the AM PM using AV buttons w r t th AM _ on Remote Controller The function can be heard through the voice guide Pressing Clock or Stop OK button on Remote Controller will complete the time setting process Tip e Any scheduled cleaning will be activated based on the time on the Robot Cleaner You must set the clock before setting scheduled cleaning e f there is no input for 10 seconds the clock setting is canceled 24 SCHEDULED CLEANING lhe You can schedule cleaning so that the Robot Cleaner starts cleaning at a scheduled time Pressing Schedule button on Remote Controller only when the Robot Cleaner is recharging will start the scheduled cleaning setting Select Once reservation or Daily reservation option by using AW POS C82 O58 buttons on Remote Controller op TK A voice message will confirm the schedule PJA Set the hour by using the AW 1 J AM buttons on Remote Controller J Select a setting by using O lt P buttons on Remote at Controller t
8. Dimensions Turbo Mode Learning Mode Obstacle Sensing Anti Plunge function Scheduled Cleaning Error Displaying Navigation Auto Manual Recharging Dry Mopping cleaning Option Corner Clean Voice Messaging Map Drawing Spot Cleaning Repeat Cleaning My Space Cleaning Cell by Cell cleaning Zigzag Cleaning Home Station VR621 236 mm X 181mm X 128 mm Rating 220 240 V 50 Hz Output Voltage Current Power Consumption Item Model Type DCTIV 1IA 23 W Battery Lithium Battery Rating 40 DC 14 4 V 2200 mAh REFERENCE ITEMS Open source software notice To obtain the source code under GPL LGPL MPL and other open source licenses that is contained in this product please visit htto opensource lge com In addition to the source code all referred license terms warranty disclaimers and copyright notices are available for download Removing Refitting the battery pack Turn off the main power switch Place a soft cloth on the floor Remove the screws by using on the back left side of the remove the dust bin and flip a Phillips head screwdriver Robot Cleaner the Robot Cleaner over cS j ji ie j Refit the battery in the Press the connector release Remove the battery from the reverse order lug on the connecting plug to device disconnect the battery wiring N WARNING Please be careful of fire explosion electric shock or br
9. EOD Using it outdoors can cause product failure and irreparable damage to the unit Close the cover of the dust bin on the main unit before starting cleaning Sooeeeseecreseresesesesresereseserereseoseseoeeeeee If the cover is not closed it can cause injury or product damage DO NOT use the Robot Cleaner around a banister staircase or POSH E EEO ROHS EH EHEH ETOH SOO EOSEHOSEHOEE EOE EEEOEEOEES damage to the unit In rare cases the Robot Cleaner s brush can damage carpet If this happens immediately stop the cleaning operation Sooo eeereesrscresereseeeeseoseseseseseneeseseeeeee When a carpet has long tassels the tassels can be damaged Do not let the main unit and charging terminal of the home station come into contact with metallic objects Doing so can cause product failure Do not put water detergent etc into or onto the Robot Cleaner Coereesesesecereseseseseeseoeeseseneseoeeseeseseee Doing so can cause product failure Do not put any water or detergent on the Robot Cleaner If liquids get inside of the Robot Cleaner turn off the power supply and contact an LG Electronics sales agent or customer care center Do not drop the Robot Cleaner COCO EEE SESE DE HOTELES ESEHES OREO EO EESODESOLOEOS Doing so can cause injury or product failure not covered by the warranty Do not expose the Robot Cleaner to cold temperatures less than 5 C for along pe
10. agnosis will operate when the main power switch of the Robot cleaner and the Home station are turned on and the unit docked on the Home station x Smart Diagnosis is only possible when the Robot Cleaner is attached to the Home Station 2 Press Diagnosis button on the Remote Controller then the process will start with a voice message which says Roboking smart diagnosis will be started Please step away and clear around 1 meter around the home station If the Mop Plate is attached the process will not be activated 3 When the Smart Diagnosis has successfully finished Robot Cleaner will return back to the Home Station and inform the result through a voice message After the voice message pressing the HOME button on the Remote Controller or main unit will allow the voice message to be repeated To terminate the diagnosing process press the Stop OK button on the Remote Controller or main unit x After the Smart Diagnosis voice message the Robot Cleaner will start recharging after 1 minute Repeat lt _ If an error is detected with any of the Sensors whilst in Smart Diagnosis a voice message will announce and the unit will not return to the home station Tip e Be careful not to touch the Robot Cleaner or disturb its operation before Smart Diagnosis is complete If it is accidently interrupted turn the main power switch OFF then ON again to resume the diagnosis e Smart Diagnosis will not be activa
11. ardous situation which if not avoided could result in death or serious injury A CAUTION Indicates a hazardous situation which if not avoided could result in minor or moderate injury N WARNING 1 This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety 2 Children should be supervised to ensure that they do not play with the appliance 3 If the supply cord is damaged it must be replaced by LG Electronics Service Agent in order to avoid a hazard 4 This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance Cleaning and user maintenance must not be made by children without supervision SAFETY PRECAUTIONS lhe eee N WARNING For your safety do not remove the battery from the Robot Cleaner If you need to replace the battery of the Robot Cleaner take it to the nearest authorized LG Electronics service center or dealer for assistance Co cercccrcesersseveceseceseceseroseresceeeeseseoeoee D
12. cking for foreign By using the cleaning tool OFF before starting the clean materials press down the clear hairs and other debris Put the Robot Cleaner upside Fixing Hook and pull it up to and foreign materials on down on a soft cloth separate the brush Cover the Brush and from the 2 smaller jockey wheels O Push the Brush all the way While pushing the Brush lift Carefully clean the Brush into the yellow protrusion the white protrusion part up to with a vacuum cleaner or separate it from the main unit SciSSOIS Fit the Fixing Hook While pushing the Brush to Press down and close the rectangular shape on the arrow direction fit the Cover until a crack sound the side of the Brush into Fixing Hook rectangular is heard from both sides of the slots with the colors shape on the opposite side Fixing Hook matching into the slot Be careful not to trap the side brush bristles under the cover when closing it CLEANING THE SENSORS CHARGING TERMINALS zC exX gt E7 amp E E E gt xX_ gt E Z Z lt Z C E gt E En ooo There are sensors on the Robot Cleaner that detect obstacles stairways and the home station for charging the battery In order to maintain the performance of the Robot Cleaner regularly clean the sensors and charging terminals as follows 1 Turn off the power switch on the rear side of the Robot Cleaner Injury can be caused by the activation of the Robot Cleaner if th
13. condition e ls the Robot Cleaner stuck gt After removing it from the obstacle place the Robot Cleaner back onto the flat floor 36 TROUBLESHOOTING Upon a voice message Please check if the dust bin is installed with the filter A warning message will be given if there is no Dust Bin or Filter housing fitted e Is the Dust Bin fitted to the Robot Cleaner gt Open the Dust Bin compartment cover and check to ensure the Dust Bin is in place gt Do NOT leave the Dust Bin Cover open Upon a voice message Battery is low Please move Roboking onto the home station to charge When the remaining amount of battery power is almost nil the voice Battery is low is generated e Initiate battery charging of the Robot Cleaner by moving it to the home station gt When the Robot Cleaner is attached to the docking station successfully it will start the recharging with the recharging start melody 37 TROUBLESHOOTING eee Upon a voice message Please remove foreign material from the brushes on the bottom A warning message will be given if foreign materials restrict the Brush s rotation Turn off the main power switch on the rear of the Robot Cleaner Lay a soft cloth on the floor and put the Robot Cleaner upside down on it Before turning over the main unit remove the Dust Bin Otherwise it will cause dust to fall from the Dust Bin e The brush is making a loud abnormal sound gt Confirm
14. de Robot Cleaner runs more intensely for a powerful clean Turbo mode will reduce the battery duration lt Turbo Mode Floor Master Function gt Turbo mode will automatically operate when the Robot Cleaner cleans carpets Repeat Mode Pressing Repeat button on Remote Controller will activate Repeat Soin mode with a voice message m While in Repeat mode pressing the same button will cancel Repeat mode with a voice message In Repeat mode Robot Cleaner repeats the cleaning in progress until the battery runs out without returning to the home station Learning Mode The Robot Cleaner is capable of memorising the cleaning environment through its Learning mode for an intelligent cleaning operation Learning Mode is available only when the machine starts cleaning from the Home Station Tip e Precautions with Smart Operation This Learning mode enables memorizing locations with obstacles to help bypass them Robot Cleaner memorizes every aspect of the environment it was subjected to from when it started cleaning from the Home Station to the moment it finishes its course Robot Cleaner learns new conditions again when the location of Home Station has been changed If the learning mode is accepted a voice message will say Environment has been studied by learning process 23 TIME SETTING eee You can set or change the current time on the Robot Cleaner Pressing
15. e is the risk of damage to the brushes If the floor is rough or frequently cleaned the side brushes may bend or become deformed In this case use the following method to straighten the side brush 1 The following procedure is helpful in restoring deformed brushes 2 Turn off the power by switching the main switch off on the rear off the unit 3 Place the Robot Cleaner at the end of a table to make cleaning the side brush easier Make sure that the Robot Cleaner is not in danger of falling 4 Soak the side brush in warm to hot water 5 Press down on the side brush for about ten seconds so that it is completely submerged in the water 6 Slowly wipe the side brush by sliding it through your hand T Rotate the side brush and repeat steps 4 6 for each section of the brush 8 Use the side brush only after it has completely dried Side Brush management 1 Remove the screws by using a suitable screw driver and separate the Side Brush from the main unit 2 Remove any hair after the separation 3 Assemble the Side Brush by replacing it onto the bottom of the Robot Cleaner with the R and L marking of the Brush matching the counterparts on Robot Cleaner CLEANING THE ULTRA MICROFIBER MOP OPTION To avoid odors dirt and dust should be washed off the mop after it is used for cleaning Follow these directions to wash the ultra microfiber mop 1 Separate the ultra microfiber mop from the mop plate
16. e left of the HEPA Filter module on the rear side of Dust Bin to separate the HEPA Filter and the sponge 2 Thoroughly clean out the fine dust particles on the HEPA Filter with a vacuum cleaner or cleaning brush Do NOT wash the HEPA Filter with water Its suction power will be reduced 3 Use a cleaning brush to clean the Sponge Filter If using water to clean it allow it to dry completely in the shade before refitting 4 Assemble the HEPA and Sponge filters back onto the Filter housing as per the following sequence Fit the rectangular locator on the HEPA Filter into the locating slot of the filter body Be careful not to incorrectly assemble HEPA and Sponge Filter onto the Filter housing Tip e To preserve the performance of the Robot Cleaner clean the HEPA Filter at least once a week with a brush or vacuum cleaner e The HEPA and sponge filters must be fitted to the filter housing before refitting the filter to the dust bin Operating the Robot cleaner without the HEPA and sponge filters will cause the suction motor to malfunction 31 CLEANING THE BRUSH Tae The rotating Brush located on the bottom of Robot Cleaner helps collect the dust Clean the Brush as per the following sequence Before turning over the main unit lay a soft cloth on the floor and remove the Dust Bin Otherwise the main unit can get scratched and dust will fall from the Dust Bin Turn the Main Power Switch After che
17. e main power is not turned off 2 Lay a smooth cloth on the floor turn over the Robot Cleaner and put it on the cloth Please make sure to remove the dust bin before rotating the main body Otherwise the dust in the dust bin may fall out 3 Use a smooth cloth or cleaning brush to wipe the dust off each of the 3 cliff sensors camera sensors and ultrasonic sensors and the charging terminal as described below Ultrasonic sensors a A O 0 6 0 e Obstacle detecting es Sensor window Detecting akan of home station amp Receiving sensors of remote controller Upper camera sensor Y R gt MO Cliff detection sensors s e iw Charging terminals 0 0 0 0 O a Bottom camera sensor Charging terminals jm Lens Tip e Do not clean the Robot Cleaner by directly spraying it with water thinners solvents benzene or any other liquids e Call the service center if the sensor or charging terminal is damaged Sensor and terminal damage can cause the product to malfunction e To clean the sensor charging terminals use the cleaning brush 33 CLEANING THE SIDE BRUSH Foreign objects materials such as hair can easily adhere to the side brush Remove such materials at least once a week If excessive amounts of foreign materials are stuck to the brush ther
18. e station Charging terminal Dust bin Dust bin handle W Cleaning brush Dust bin cover Suction port flap m on cme sZ N Seococece Srecccccce mare 7 Alee NEA OOE EAS a S Q Dust bin lid NY A AAE A A ee opening button K pags naa D e 2 a e Filter cover e gt Figures can be different from actual objects BUTTON FUNCTIONS ROBOT CLEANER e If the button is pressed Turbo Mode will be set with a voice confirmation e If the button is pressed whilst in Turbo Mode it will be canceled TURBO e Used to turn the power on from Standby start or stop cleaning e If the button is pressed whilst the unit is powered ON it will start cleaning e If button is pressed during the cleaning it will stop the cleaning e If the button is pressed for about 2 sec whilst the power is ON the power will be returned to Standby e If the button is pressed in Smart Diagnosis mode it will end the diagnosis START STOP e Used to change the clean mode setting e If the machine is at the Home Station Spot Clean option is not available e The My Space mode can only be selected by remote control when the Robot Cleaner is not on the home station MODE e Used to return the Robot Cleaner back to the home station for charging HOME e If cleaning is finished or the battery is low the Robot Cleaner will return to the Home Station by itself to recharge its ba
19. eakdown e Do not charge this Battery Pack with any other type of charger other than the one originally provided with the Robot Cleaner e Do not damage the battery pack in such ways as dropping crushing cutting or shorting extemal contacts e Do not attempt to disassembly the battery pack In any case When the battery pack is damaged or malfunctioning bring it and the Robot cleaner and Home station to an authorised service center e Do not place the battery pack near a heat source or do not dispose of in fire or water e Please keep the battery pack away from any damp or wet environment when the pack is charged e Please keep away from children infants or pets 41 LG Life s Good Disposal of waste batteries accumulators 1 When this crossed out wheeled bin symbol is attached to batteries accumulators of Your product it means they are covered by European Directive 2006 66 CE 2 This symbol may be combined with chemical symbols for mercury Hg cadmium Cd or lead Pb if the battery Contains more that 0O 0005 of mercury 0 002 of cadmium or 0 004 of lead 3 All batteries accumulators should be disposed separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities 4 The correct disposal of Your old batteries accumulators will help to prevent potential negative consequences for the environment animal and human health 5 For more detailed informatio
20. er near the location where it was originally moved from The location search is more effective when the Robot Cleaner is closer to the location where it was moved from f it is moved from its original cleaning position by more than 1 m it becomes difficult for the Robot Cleaner to search for it s previous location Location of incident 2 Press the START STOP button on the Robot Cleaner or START button on the remote controller Robot Cleaner will then start the location search function along with an audio guide When the location search is successfully completed it will continue cleaning from where it was moved If the location search fails it will start again from the beginning To find exact location Zigzag please step away from the Roboking Location of incident Tip e f the power is turned off after the location search function is set the location search function will be canceled e Location search will be more effective when the Robot Cleaner is closer to the location where it was moved from 27 SMART DIAGNOSIS Robot Cleaner uses this Smart Diagnosis feature to run a self diagnosis If any irregularity is found from the diagnosis please contact the local LG Electronics service center During Smart Diagnosis the Robot Cleaner will move about within a 50 cm radius So make sure no objects are in the way within a 1 m radius around the Home Station before starting Smart Diagnosis 1 Smart Di
21. g area that the Robot Cleaner will resume cleaning when charging has completed flashing Cleaning indicator If the Battery is Not Charging Check 1 If the battery is not charging even when the Robot Cleaner is attached to the home station check the following items Turn the power switch on the rear left of the Robot Cleaner off once and then on again Check the power lamp of the home station Wipe the terminals on the home station with a dry cloth p33 Power lamp Charge terminal 19 CLEANING MODES K Zigzag Cleaning In Zigzag mode Robot Cleaner repeats a zigzag operation to clean each and every spot in the cleaning area If you need to quickly clean an area choose Zigzag mode Press Mode button on Remote Controller or main unit to select Zigzag mode and press Start button Factory release default setting is Zigzag Cell by Cell Cleaning In Cell by Cell mode Robot Cleaner cleans the area by dividing it into rectangular spaces For meticulous cleaning select this mode Press Mode button on Remote Controller to select Cell by Cell mode and press Start button The 1st stage The maximum outline of 3 m x 3 m of cleaning area will be cleaned The size of the outline may vary in accordance with the shape of the area to be cleaned The 2nd stage The 2nd stage of Cell by Cell cleaning engages a Zigzag mode aut
22. h D D Flickering sam Set the minutes by using the AV _ Once reservation tt am buttons on Remote Controller lickering tn r eS Daily reservation Flickering me Set the AM PM using the AY t L MaM buttons on Remote Controller Pressing Schedule or Stop OK button on Remote Controller will then complete the scheduling process Tip e When the scheduled time comes up Robot Cleaner will start cleaning by itself e Scheduled cleaning can only be set when the Robot Cleaner is recharging e While recharging by pressing the Schedule button on the Remote Controller for 3 seconds will cancel the set schedule e f there is no input when setting the schedule time within 10 seconds the setting is canceled 25 MOP CLEANING OPTION By attaching the ultra microfiber mop you can effectively use the Robot Cleaner to remove dust on hard floor surfaces When the mop plate is attached the Robot Cleaner will not climb on to carpets or over thresholds in order to prevent transferring dirt from the mop Caution Do not cover the bottom camera sensor by mop For mop cleaning mount the mop and mop plate to the Robot Cleaner according to the following instructions 1 Attach the ultra microfiber mop to the Velcro of the mop plate as shown in the figure 2 Firmly slide the Mop Plate into the furrows until you hear a clic
23. he rear of Dust Bin to separate the filter and the sponge Note that separating the filter may result in dust dropping Refer to p 31 when cleaning the Dust Bin Filter 4 Lift the dust bin lid upward while pressing the separation button on the dust bin 5 Empty the dust bin and clean it with a cleaning brush or under running water 6 After cleaning with water completely dry the dust bin in a well ventilated area out of the direct sunlight T When reassembling or fitting the cleaned Dust Bin close the lid and put in the Sponge and HEPA Filter Refer to p 31 for detailed assembly guides 8 Put the dust bin into the Robot Cleaner and close the dust bin compartment cover Tip e Operating the unit without Filters fitted to the dust bin can cause a motor malfunction not covered by warranty e After cleaning the Dust Bin make sure to assemble the filter and fit it to the Dust Bin If you initiate cleaning with no filters fitted to the dust bin or Filter Cover not assembled a voice message will be announced which says Please check if the dust bin is installed with the filter J e Always ensure that the dust bin lid is refitted correctly after a cleaning the dust bin so that it closes easily and accurately 30 CLEANING THE DUST BIN FILTER eee The Dust Bin Filter consists of a HEPA Filter and Sponge Filter Clean both the HEPA and Sponge filters as per the following sequence 1 Pull the hook on th
24. hich is not covered by the warranty Do not activate the device on a floor that has more than a 10 degree incline secoococoooococococcoccoococococoooocoooocococoooooo The device may not work properly Turn the power supply off immediately if any abnormal sound odor or smoke is generated from the Robot Cleaner by removing it from the home station and turning off the main switch on the rear side of the unit eeocsooccococoocococooococosococoococcocococoooooooo Failure to do so can cause fire or product failure Do not operate the Robot Cleaner in a room where a child is sleeping cescecosocososooecoccoooccooooococooooocecoocoooooooo Doing so can cause injury or product damage Do not leave Children or pets near the Robot Cleaner unsupervised eecoscocosoocococsocosocosooosocosooococosooceooosoo Doing so can cause injury or product damage A This product is intended for indoor domestic home use and should not be used in mobile applications it should not be used in commercial applications such as workshops or garages or around indoor swimming pools etc SAFETY PRECAUTIONS CAUTION Frequently empty the dust bin and maintain its cleanliness The dust collected in the dust bin can trigger allergies and may contain harmful insects it should be cleaned after each use Use the Robot Cleaner indoors COO OREO COO SETH DEES EERE OOH OOOH EEEEOODEOOEEOEE
25. igher 17 HOW TO CHARGE THE BATTERY Automatic charging The Robot Cleaner returns to the home station at the end of a cleaning cycle or when its battery is running low If 10 minutes elapse without the Robot Cleaner moving or the battery is too low the power will be automatically turned OFF Do NOT turn OFF the Main Power Switch as the battery will not be recharged If the machine is returned manually with the Main Power Switch OFF it announces an error message Main power switch on the back of the Roboking is turned off Please turn the switch on In the event that the unit returns to the Home Station due to a low battery during the cleaning cleaning will be started after recharging from the nearest place of the area which has not been cleaned before Page 19 If Robot Cleaner is unable to dock to the home station on its first attempt it will try again until it docks successfully When Robot Cleaner has completed all areas that it can clean it will return to the home station even when the battery level is not low Manual charging You can manually charge the battery prior to using the Robot Cleaner for the first time or to charge the battery during cleaning Method 1 Attach the Robot Cleaner to the home station by aligning to the front side of the home station A melody sound will be generated along with an audio message to start charging If a voice message Main power switch on the back of the R
26. ion e Please close any balcony doors as the wheels may get stuck while cleaning INCLUDED WITH PRODUCT Robot Cleaner Remote controller Home station gt Figures can be different from actual objects 16_ GUIDE RAPIDE ASPIRATEUR ROBOT Pou Cleaning Tool Dust bin filter spare Quick guide Operation manual for cleaning sensors for cleaning the filter Cleaning brush Ultra microfiber mop It s on the dust bin cover 2 pieces option Batteries for remote controller Side brush 2 pieces Carpet Master 2 units of AAA size option option PARTS DESCRIPTION ROBOT CLEANER Plan view Upper camera sensor Dust bin cover Display amp function buttons Dust bin compartment release button Front view rr Ultrasonic sensors m SS a v Obstacle detecting sensor window Detecting I OSES p TEN Y sensors of home station amp Receiving sensors of remote controller Main Power switch oo0o00000 o0o000000 o0o0000000 eeens gt Ventilation port Cliff detection sensors Side brush Charging terminals Brush mpa roo N pi f naM me il ind jem ow ENCL Wheel 77 Battery housing gt Figures can be different from actual objects PART DESCRIPTION HOME STATION DUST BIN Hom
27. k sound Note that if the Mop Plate is not secured correctly it may separate JEE SD during the cleaning SZ 3 It is essential that the fixing hooks on the Mop Plate align correctly on to the fixing grooves on the underside of the cleaner Tip e To avoid odors wash any foreign material or dust off the mop after cleaning is completed e To avoid staining floors do not use the ultra microfiber mop to clean when dirt is contaminated with liquids such as coffee or ink e To avoid damage to carpets from the Velcro or dirt transfer from the mop do not attempt to clean the carpet while the mop plate or mop is attached e Keep the ultra microfiber mop dry Do not use it on wet surfaces If there is moisture on the floor it can interfere with the navigation and damage the unit e Smart Diagnosis feature is not available when the Mop Plate is attached 26 LOCATION SEARCH FUNCTION The Robot Cleaner remembers its location while cleaning If the user moves the Robot Cleaner while it is operating it will search for the location it was moved from by using its navigational location search function before continuing to clean The navigating function will be activated after the Robot Cleaner adequately recognizes the cleaning environment When the location search function is activated the Change location cleaning mode of the status indicator will flash Manual Relocation 1 With the power off locate the Robot Clean
28. n about disposal of Your old batteries accumulators please contact Your city office waste disposal service or the shop where You purchased the product Disposal of your old appliance 1 When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002 96 EC 2 All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities 3 The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health 4 For more detailed information about disposal of your old appliance please contact your city office waste disposal service or the shop where you purchased the product Made in Korea
29. oboking is turned off Please turn the switch on is announced repeatedly then turn on the Main Power Switch Method 2 When the HOME button of the remote control or the Robot Cleaner is pressed charging will be prompted by automatically generating a searching signal and returning the Robot Cleaner to the home station manually charged by pressing the Home button it may take slightly longer to find the home station If the Robot Cleaner is within 10 cm of the front of the charging terminal while the power is turned on from Standby it will automatically be returned to the home station and charging will begin Tip Take the following precautions when using the home station e f foreign material is caught on the charging terminal charging may not be activated Wipe the terminal from time to time with a dry cloth after the power plug is disconnected p33 e To prevent electric shock or damage to the home station do not touch the charging terminal with any metallic objects e To avoid fire or electric shock never disassemble or modify the home station 18 e Do not to place the Robot cleaner the home station or power plug near a heating source HOW TO CHARGE THE BATTERY e Remaining Battery Charge Indicator The Battery level is indicated on the Status Display as follows e If recharging is in progress the Battery Level indicator flashes showing the battery charge status level e If recharging is complete only the Ba
30. oeS ecccece If multiple appliances are connected to an outlet simultaneously they can generate enough heat to cause a fire When pulling out the home station power plug always pull it out by grabbing the plug not the cord When pulling out the power plug do not to touch the prongs with your fingers soococooooooo escccooococoscoococoooocooococoooooooooo Doing so can cause an electric shock Do not allow children or pets to play with or rest upon the Robot Cleaner at any time Do not use the Robot Cleaner while eecoscoococococoosocosocosooosocosococococooosooosoo Doing so can cause injury or product damage SAFETY PRECAUTIONS hie WARNING Do not spray or use inflammable materials surfactants or drinking water in the vicinity of the Robot Cleaner secooccoocosocococococcoocooocococooocoooooooooooooo Doing so can cause fire or product failure Inflammable materials gasoline thinner etc Surfactant detergent articles for bath etc Do not insert any part of the body such as a hand or foot below the brush or wheels of the Robot Cleaner while in use secosocoooooocoooooooooocosococosooocooooocooooooooo Doing so can cause injury or product damage Do not operate the Robot Cleaner on narrow and high furniture such as a wardrobe refrigerator desk table etc soeccoccocococococcocoocoocoocococooocooooooocococoooo Doing so can cause injury product failure or damage w
31. omatically When the Ist and 2nd stages are completed the cleaned area will be cleaned again through the repetition of the above cleaning method as the device advances to the next part of cleaning area Tip e Once set up the cleaning mode Zigzag Cell by Cell setting will be maintained even after the power supply is turned off e During operation if a mode change is required press the Stop OK button and then select the mode Cleaning will then start from the beginning 20 CLEANING MODES Eee My Space Cleaning Pressing My Space on the Remote Controller rh will set the My Space cleaning mode with a voice ee ae a TATA am message AOO DR For cleaning of particular spaces select this mode S LETETI XN The 1st stage Use the Remote Controller to manually set the parameters of each cleaning block This cleaning mode will be accepted when the distance of the start and end position is less than 1m in area The 2nd stage Pressing the Start button will then make the Robot Cleaner clean the manually outlined area by itself Upon failure to correctly outline a zone a voice will announce which says Area does not meet the specified conditions Please continue to make specified area for cleaning process Use the Remote Controller to assign a zone again Upon completion of cleaning for all selected areas the Robot Cleaner will resume the cleaning mode Zigzag or Cell by Cell which it
32. or the previous location and return to the spot from where it was interrupted CONTENTS 1 A BEFORE USING ADDITIONAL INFORMATION 2 6 Safety precautions 36 38 Troubleshooting T Included with product 39 Before you call for service 8 9 Parts description 10 11 Button functions 5 12 Display status information REFERENCE 13 Before you start 14 Overview 40 Product specifications 41 Reference items METHOD OF USE 15 How to install the home station 16 How to turn the Robot Cleaner power supply on amp off 17 How to start and stop cleaning 18 19 How to charge the battery 20 21 Cleaning modes 22 23 Auxiliary cleaning modes 24 Time setting 25 Scheduled cleaning 26 Mop cleaning option 21 Location search function 28 29 Smart diagnosis 3 HANDLING METHOD AFTER USE 30 Cleaning the dust bin 31 Cleaning the dust bin filter 32 Cleaning the brush 33 Cleaning the sensor charging terminal 34 Cleaning the side brush 35 Cleaning the ultra microfiber mop option SAFETY PRECAUTIONS TTT The purpose of the safety precautions described below is for the user to use the product safely and correctly to prevent any unexpected risk of injury or damage Basic safety precautions After reading this manual please keep it in an easily accessible location i This is the safety alert symbol This symbol alerts you to potential hazards that can result in property damage and or serious bodily harm or death N WARNING Indicates a haz
33. over on the main unit Start cleaning p17 A Press the START STOP button once again while the Robot Cleaner is turned on You will hear an announcement of the cleaning mode and cleaning will begin once the Robot Cleaner has reversed and turned around Automatic charge p18 19 5 The Robot Cleaner will self diagnose and automatically return to the home station to recharge before the complete discharge of the battery It takes approximately three hours to charge the battery Use the cleaning mode and auxiliary functions p20 26 Use the buttons on Robot cleaner and Remote Controller to use each cleaning mode and supporting features Cleaning modes include ZigZag Cell by Cell Spot My space and Repeat cleaning supporting features include Manual Scheduled and Microfiber Mop cleaning lt Warning gt When the Robot Cleaner is operated with the dust bin compartment lid left 14 open it can cause an injury or serious damage to the product HOW TO INSTALL THE HOME STATION How to Install the Home Station 1 Position the home station against a wall on hard level flooring to prevent sliding during docking Remove objects within 1 5 m to the right and left side and within 2 m to the front Z Z a CRRA VACLELIE PALA E VEEL O X 2 Plug the power cord into an outlet Wrap the remaining power cord around the fixed hook on the back side of the home station or along the wall surface so that
34. remote control A melody will sound and cleaning will begin Press the Stop OK button during the cleaning cycle to stop cleaning The Robot Cleaner cannot be turned on from Standby by using the remote controller when the power of the Robot Cleaner is off When the power is off press the START STOP button on the upper side of Robot Cleaner to turn the power on and to allow the remote to be used Repeat A During cleaning collisions can happen when the sensor cannot detect objects because of their shape Thin chairs and table legs furniture corner When this happens the internal impact detecting sensor will react by using a backward motion If the Robot Cleaner is set to start cleaning at a location away from the home station put the Robot Cleaner on a flat floor in order to prevent a malfunction of the obstacle detecting sensor In addition start cleaning from a location where there are no obstacles For example curtains or walls must be 30cm from the Robot Cleaner Tip For best results e Briefly scan the area to be cleaned for big and small objects that will cause difficulty for the Robot Cleaner e If cleaning is started when the Robot Cleaner is at the home station the device can rapidly be returned to the home station as the current home position has been accurately read e When the mop plate is installed to prevent a 2 4 contamination from the contaminated mop it will not go over door sills of 5 mm or h
35. riod of time POC eS oo eS oeEE EEE EEE SOSEHESEHES EES SO EESEEES EEE LEEDS Remove any cables or string COOH E EOE EETEEOEEEH OEE SSEEESOHET ETE SOSESESOSEEES Cable or string can get tangled in the wheels of Robot Cleaner and cause product failure or the cord of an appliance can be disconnected Make sure the Robot Cleaner is not put on a table or desk with the power ON It may result in an injury or damage to the product Do not allow the Robot Cleaner to sweep up liquids blades thumb tacks sharp objects or ashes hot or cold etc Peer seers sesesesseesesesesesesessDeseseseseseoeees These items can cause product failure or damage Do not put sharp objects into the opening of the Robot Cleaner s ultrasonic sensors Doing so can cause produc failure Do not use the Robot Cleaner when the dust bin is completely full COKE EEE ESE HEHEHE ESESOSETOD ELECT EEESESESOEEEES failure SAFETY PRECAUTIONS Co l lS SST N CAUTION If the floor is wet or has wet spots wipe them up before using the Robot Cleaner Do not use the Robot Cleaner on a wet surface Doing so can cause product failure When attaching the mop ensure that it is fitted correctly so that it does not block the lower camera sensor Blocking the bottom camera When the robot cleaner is operating it may hit the chair leg desk leg table leg or other narrow pieces of furniture For quicker and better cleaning place
36. rrent when Spot cleaning cleaning mode and scheduled time is selected Tip e Once the clean mode is selected Zigzag or Cell by Cell it will be remembered even if the power is OFF e To cancel the reservation please press the Schedule button on the remote for 3 seconds while the Robot Cleaner is recharging BEFORE YOU START gt Check these items before cleaning e Do not use this device in a room where a child is left alone The child could be injured e Remove fragile or unnecessary objects from the room to be cleaned Especially remove expensive ceramics and valuables from the floor e Close the cover of the dust bin compartment before cleaning e Remove any moisture that might be on the floor e Remove cables strips towels mats etc from the floor so they will not get tangled in the brushes e Confirm whether the battery charge is sufficient and if it is low recharge it e Empty the dust bin before or after each clean or before it becomes full e Close the doors of any room that you do not want the Robot Cleaner to enter During cleaning the Robot Cleaner may enter another room and continue cleaning e When the mop is attached Robot Cleaner will not be able to go over thresholds of 5 mm or higher If you are not planning to use the mop for cleaning remove the mop before using Robot Cleaner e Before starting the device it s better to remove carpets that are thicker than 20 mm as they may cause it to malfunction
37. t be done due to a problem in the cliff detection sensors on the bottom Please clean the sensors Clean the three Cliff Sensors on the bottom at the front of the unit Please wipe the lower camera sensor on the right bottom of the Roboking Clean the lens of Camera Sensor on the bottom right Please wipe the obstacle detecting sensor window on the left and right side of the Roboking Clean the lens of the Obstacle Sensors on both the left and right hand sides A problem has been found on the Gyro Sensor Run Smart Diagnosis again and if the same message is announced contact an LG Electronics service center Please check for dirt on the left wheel Check for foreign materials on the left wheel Please check for dirt on the right wheel Check for foreign materials on the right wheel A problem has been found on the left wheel sensor Run Smart Diagnosis again and if the same message is announced contact an LG Electronics service center A problem has been found on the right wheel sensor Run Smart Diagnosis again and if the same message is announced contact an LG Electronics service center Please check the brushes for obstructions Check for any foreign material stuck in the Brush A problem has been found in the suction motor Run Smart Diagnosis again and if the same message is announced contact an LG Electronics service center A problem has been found in the accelera
38. ted in each of the following cases In each case check the problem and try again Robot Cleaner is detached from Home Station Battery level is insufficient No Dust Bin Filter is fitted 28 Mop Plate is attached SMART DIAGNOSIS If a voice message is announced after Smart Diagnosis refer to the following table to take proper actions Voice message Measures for reference Roboking smart diagnosis will be started Please step away and clear around 1 meter around the home station Clear any object within a 1m radius around Home Station and stay back until the diagnosis is complete Smart diagnosis can start when it is being charged Please dock Roboking to the home station to charge Move Robot cleaner to the Home Station to recharge it No defect found during diagnosis Diagnosis mode cannot be operated due to a low battery Please try again after the battery is charged Try the Smart Diagnosis again after recharging the battery Please check if the dust bin is installed with the filter Open the Dust Bin Cover and examine the bin Charging cannot be done due to a problem in infrared sensor Run Smart Diagnosis again and if the same message is announced contact an LG Electronics service center Charging cannot be done due to a problem in ultrasonic sensor Run Smart Diagnosis again and if the same message is announced contact an LG Electronics service center Charging canno
39. the correct assembly of the brush by checking the separation groove of the brush gt Remove the lower rotating brush from the Robot Cleaner and remove any foreign material from the brush e The lower rotating brush or side brush is stuck gt Remove any foreign materials such as cables thread of hair caught in the side brushes or the lower rotating brush For a more detailed description of this process refer to the instructions on page 32 34 38 BEFORE YOU CALL FOR SERVICE I TTT Confirm before reporting the failure of Robot Cleaner Solutions Reference page Problem The power supply cannot be turned on The power supply automatically turns off The Robot Cleaner will not charge Suction power becomes weak Noise becomes louder The Robot Cleaner will not activate The lower brush does not rotate Movements or travel path are abnormal The Robot Cleaner cannot be activated with the remote control Check that the power switch is turned on Page 16 This is not a failure Robot Cleaner has its own power saving function If it is not used for ten minutes after the power supply is turned on the power will automatically turn off Page 18 gt Check whether the main power switch is turned on gt Remove objects around the home station Page 16 gt Confirm that the power supply is connected to the home station Page 15 gt Wipe the charging terminals with a dry cloth
40. the dining chairs on top of the dining table NOTE Very low thresholds will allow the Robot cleaner to go over them and perhaps into an undesirable location Make sure that all the doors of the rooms that are not to be cleaned are sensor may not allow the product to work correctly closed To save energy when the Roboking is not in use for longer periods turn off the power switch and turn on the power switch again just prior to using the Robot cleaner again Tip Check the following items before use e Empty the dust bin after each operation or prior to it filling up e Remove any cables or long strings from the floor e Remove any moisture from the floor before cleaning e Close the cover of the dust bin before cleaning e Remove fragile or unnecessary objects from the room to be cleaned For example remove expensive ceramics and valuables from the floor e Confirm whether the battery has sufficient power and if it is low recharge it e Close the doors of any room that you do not want the Robot Cleaner to enter During cleaning the Robot Cleaner may enter another room and continue cleaning e Do not use this product in the room where a child is sleeping alone The child can be hurt or woken e Remove towels foot towel or any other thin cloth from the floor as they can get caught by the brush e Before starting the device it s better to remove carpets that are thicker than 20 mm as they may cause it to malfunct
41. tion sensor Run Smart Diagnosis again and if the same message is announced contact an LG Electronics service center In order to listen to the smart diagnosis result again please press the charging button To stop please press the stop button Smart diagnosis mode will be turned off If you need to repeat the diagnosis result press the Home button or press Stop OK button to finish the diagnosis Please try smart diagnosis again after turning the main power switch off and on from the back of Roboking If the problem continues please contact LG Electronics customer care Smart Diagnosis mode cannot be operated with mop plate being attached Please try again after removing it Smart diagnosis has failed to operate Please try it again after turning off and on the main power switch on the back of the Roboking Run Smart Diagnosis again after removing the Mop Plate Turn the main power switch OFF and then ON again to resume the diagnosis Do NOT touch the robot or disturb its operation until the diagnosis is complete CLEANING THE DUST BIN If the dust bin is full suction power can be reduced Clean the dust bin before or after each cleaning session Clean the dust bin using the following sequence 1 Open the dust bin compartment cover by pressing the PUSH button on the Robot Cleaner 2 Grab the handle of the dust bin and pull it upward 3 Pull the hook on the left of Filter Cover on t
42. top button for 1 second until a Ting sound is heard In about 10 seconds the power will be on and a melody will sound If 10 minutes elapse without the Robot Cleaner having being given an active command after being turned on the power will automatically return to Standby again Turning off the power supply Press and hold the START STOP button for two seconds while the Robot Cleaner is turned on A melody will sound when the power is turned off Tip e If the power cannot be turned on do the following Turn the main power switch OFF wait 5 seconds then ON again Press the START STOP button after the main power switch has been turned on again If the power is not turned on or if there is no display but only the Ting sound put the Robot Cleaner manually on to the home station as the battery may be flat HOW TO START AND STOP CLEANING Using the buttons on the Robot Cleaner After the Robot Cleaner main power switch is turned on press the START STOP button to begin cleaning A melody will sound and cleaning will begin Press the START STOP button during the cleaning cycle to stop cleaning When the START STOP button is pressed while the power supply of the Robot Cleaner is in Standby the power will be turned on Press the START STOP button one more time to start cleaning Using the remote controller After the Robot Cleaner is turned on from the Robotic Cleaner oress the START button on the
43. ttery e Pressing the Turbo and Mode button for 3 seconds will activate or BUTTON LOCK deactivate the Lock function On Off e If Lock is ON a voice announcement Key lock has already been set will be heard each time a button is pressed 10 BUTTON FUNCTIONS REMOTE CONTROLLER Home Used to recharge the Robot Cleaner by making it return to the Home Station p18 Start Pressing this button will start the cleaning p17 Turbo Used to activate or deactivate Turbo mode p23 Changes the cleaning mode p20 Directional button _ e This button enables Manual Operation and selection of an area in My Space cleaning mode Repeat Rapes This button allows activating RO Stop OK Pressing the button will stop the Robot Cleaner or confirm a cleaning schedule or time setting My Space Used to put the Robot Cleaner in My Space clean mode p21 Mute Used to activate or deactivate Mute mode p12 or deactivating Repeat Cleaning mode p23 Used to start cleaning at a scheduled time Pressing the button for 3 sec will cancel the scheduled cleaning Schedule Setting Cancel options are available only in Charge mode p25 Diagnosis Used to run Smart Diagnosis Available only when Robot Cleaner is recharging p28 Clock Used to set the current time indicated on the Robot Cleaner p24 Tip e Remote Controller does NOT provide a Po
44. ttery and Clean Mode icons are displayed to save the energy e Upon the need for recharging only the first level of the Battery charge level indicator will be on and flashing gt Flickering SNL D a Z N rire 00 10 ef ef j Charging is required i Low i Ba KEKA EN ATI AM l n Middle R DR UA High The status indicators show the different pending conditions during charging mode If Robot Cleaner goes back to the Home Station in need of a charge during the cleaning mode the Cleaning mode indicator will continue to flash during charging to indicate that cleaning was disrupted as the battery required charging wS pL When the Clean Mode lamp continues to flash after recharging is i complete Robot Cleaner will then resume cleaning the areas which were tn In the case of no existing area to be cleaned after charging not previously completed Pressing the Start button on the Remote Controller or Start Stop button on main unit whilst it is recharging with the Clean Mode lamp flashing will also m manually force the Robot Cleaner to find and clean the uncovered areas TITT Pressing the Start button on the remote control or the Start Stop K JLA pi D button on the Robot Cleaner after the Charging has completed will make U the Robot Cleaner start to clean from the beginning again In the case of an existin
45. was last set to Tip e While recharging you cannot activate My Space mode e To change the cleaning mode while the Robot Cleaner is in operation press Stop OK button first then select a cleaning mode The cleaning will then start from the begining 21 AUXILIARY CLEANING MODES Manual Cleaning By pressing a direction key on the Remote Controller you can move the Robot Cleaner manually Robot Cleaner will clean the area by pressing the forward backward left right buttons accordingly on the keypad of the remote control While in Manual mode the robot cleaner will run into obstacles placed behind it if the backward key on the remote is pressed or held down Spot Cleaning Is best used to clean certain parts of the house Press Mode button on the Remote Controller to select Spot mode which will then indicate on the Status Display then press the Start button then Robot Cleaner will start Spot cleaning an area of 1 5 m in diameter around it While recharging Spot cannot be selected 22 It stops at the started position after completing the cleaning takes 4 5 min AUXILIARY CLEANING MODES ttt Am Turbo Mode EA I gsal WN Pressing the Turbo button on the Remote Controller or main unit will activate Turbo mode with a voice message While in Turbo mode pressing the same button will cancel Turbo mode with a voice message In Turbo mo
46. wer ON function e With the machine s power OFF the Remote Controller will not work e To turn the power ON OFF use the Start Stop button on the upper section of the Robot Cleaner e The Mode My Space or Clock button can only be used after stopping the Robot Cleaner or whilst it is charging on the Home station 11 DISPLAY STATUS INFORMATION Mute icon This icon indicates whether the Mute is ON or OFF Battery icon This icon indicates the residual battery level it flashes if the battery needs recharging Lock icon Indicates whether a is activated or not AM PM icon This indicates a m e O or p m according to the clock setting P ant an 1 e s Turbo icon This display S Pi aca e ae ey My i illuminates if Turbo Schedule co AAN Indicates the status of Schedule Once reservation or Daily reservation setting Mode is activated Homing icon This icon is displayed if Robot Cleaner is in Homing mode Repeat cleaning S __ Displayed if the machine is in Papeat Cleaning mode Zigzag cleaning This icon is displayed to indicate Robot Cleaner is working in a Zigzag Clean My Space cleaning Is displayed when the Robot Cleaner runs My Space cleaning mode Cell by Cell cleaning Spot cleani pot cleaning This icon is displayed to indicate Robot Cleaner is Time display This icon appears working in a Cell by Cell This indicates the cu

Download Pdf Manuals

Related Search

Related Contents

HDMI Converter MODEL:LM-YH02 Operating Instructions Dear  Silverstone ST56F  ASUS VT207N  Ergotron 400 Series Suspend Mount Arm. Black  GeoMedia plug-in user manual  56023703 SX5D GSM User Manual.qxd  Atlantis Land A05-17AM-L03 User's Manual  

Copyright © All rights reserved. Failed to retrieve file