Tissot Classic Dream
Contents
1. Quartz watches Quartz watches are battery powered and cannot be recharged Autoquartz watches To wind an Autoquartz watch turn the crown through a few dozen 50 revolutions in position I or IB for models with screwed crown The automatic winding system will then ensure that the watch is fully wound by means of your wrist movements alone The watch needs to be worn for several weeks to reach maximum charge and thereby achieve its theoretical power reserve of 100 days Quartz solar watches These watches do not have a winding crown To recharge the accumulator expose the dial of your watch either to the sun or to artificial light Settings NB Please take account of the information above if your watch is fitted with a screwed crown Setting the time Pull the crown out to position Il and turn it in either direction until the desired time is displayed On certain models with a seconds hand you can synchronize it with an official time signal radio TV Internet When the crown is pulled out to position Ill the seconds hand is stopped Once the time is synchronised push the crown back into position I and screw it back in on models with a screwed crown Rapid correction of the date and day NB Do not perform a rapid date correction between 22 00 and 02 00 Pull the crown out to position Il and turn it clockwise until the desired date is displayed or counterclockwise to correct the day During this operation your watch wil2. T TISSOT SWISS WATCHES SINCE 1853 Analogue Quartz Watches Users Manual 1 2 Display and functions Seconds hand Minute hand Hour hand Date Day According to model Models with a screwed crown IA IB a IA Initial position screwed down not pulled out IB Winding position unscrewed not pulled out www tissot ch 1 3 156_EN 02 14 Analogue Quartz Waches Congratulations We congratulate you on choosing a TISSOT watch a Swiss brand among the most highly renowned in the world Meticulously designed using only the highest quality materials and components your watch is protected against shocks and impacts variations in temperature water and dust To ensure that your watch operates with perfect precision for many years to come we advise you to pay very careful attention to the advice provided hereafter This user s manual applies to all TISSOT quartz quartz solar or autoquartz watches Please refer to the explanations relating specifically to your watch model Recharging the accumulator Models with screwed crown To ensure even better water resistance certain models are fitted with a screwed crown Before setting the time date or day you must first unscrew the crown into position IB before you can pull it out to position Il or III Important After every operation the crown must be screwed back in to maintain the water resistance of the watch
3. oxide battery since this would irrevocably destroy the movement EOE Function End of Energy Your TISSOT Autoquartz watch is equipped with an EOE End of Energy energy requirement indicator If you observe the seconds hand jump every 4 seconds it means that your watch needs to be wound see the Recharging the accumulator section Water resistance TISSOT watches are designed to withstand a pressure of up to 3 bar 30 m 100 ft 5 bar 50 m 165 ft 10 bar 100 m 330 ft 20 bar 200 m 660 ft or 30 bar 300 m 1000 ft depending on the information shown on the case back A watch cannot be permanently guaranteed absolutely water resistant It may be affected by ageing of the gaskets or by an accidental impact on the watch We recommend that you have your watch s water resistance checked once a year by an approved TISSOT service centre Care and maintenance Temperature Do not expose your watch to sudden temperature changes exposure to sunlight followed by immersion in cold water or extreme temperatures over 60 C 140 F or below 0 C 32 F Magnetic fields Do not expose your watch to intense magnetic fields such as those generated by loudspeakers mobile phones computers refrigerators or other electromagnetic appliances Shocks and impacts Avoid thermal shocks or impacts since they may harm your watch In the event of a violent impact please have your watch checked by an approved TISSOT s
4. ervice centre 156_EN 02 14 TISSOT Analogue Quartz Waches Harmful products Prevent your watch from coming into any direct contact with solvents detergents perfumes cosmetic products etc since they may damage the bracelet the case or the gaskets Cleaning We would advise you to clean your watch regularly except for the leather strap using a soft cloth and lukewarm soapy water After immersion in salty water rinse your watch in fresh water and leave it to dry completely Quartz or Autoquartz watches If you are considering not wearing your watch for a few weeks or months we would advise you to pull the crown out to the last stop before storing It This will reduce energy consumption Services Like any precision instrument a watch must be serviced regularly for optimum operation As a general rule we recommend that you have your watch checked every 3 to 4 years by your approved TISSOT retailer or service centre However please note that depending on the climate and the conditions of use of the watch a shorter interval may be required To benefit from the highest standards of service and to ensure your guarantee remains in force please always contact an approved TISSOT retailer or service centre Availability of spare parts From the stoppage date of the watch production TISSOT guarantees the availability of its spare parts for a minimum period of 10 years for standard watches and for a period of up
5. l keep operating so you will not need to adjust the time www tissot ch 2 3 T SWISS WATCHES SINCE 1853 Technical information TISSOT quartz watches Boasting the incomparable accuracy of quartz they generally have a power reserve of more than 2 years in continuous use though this varies slightly depending on the habits of the wearer and the ambient temperature Similarly the ambient temperature may affect the accuracy of quartz movements causing variations of around 0 5 to 0 7 seconds per day All you have to do is to set the time and possibly the date if your watch is equipped with a display of this kind see the Settings section EOL Function End of Life The battery end of life is indicated by the seconds hand making 4 second jumps The watch will keep operating for a few more days but the battery should be removed and replaced by an approved TISSOT service centre as soon as possible TISSOT Autoquartz watches As accurate as a quartz watch yet operating without a battery these watches are equipped with an accumulator which automatically recharges its energy by means your wrist movements The oscillation movements of your wrist turn an oscillating weight each rotation of which activates a micro generator which in turn charges an accumulator with electrical energy Power supply The lithium accumulator has an average service life of more than 10 years Never replace it with a conventional silver
6. to 20 years for gold watches If for any reason production of a particular spare part is stopped or deferred TISSOT reserves the right at its sole discretion to offer the customer an alternative solution Collection and treatment of end of life quartz watches This symbol indicates that this product should not be disposed of as household waste It must be returned to an approved collection point By following this procedure you will contribute to safeguarding the environment and human health Recycling the materials will help to conserve natural resources Battery type silver oxide and zinc button cell Autoquartz manganese dioxide and lithium button cell Valid in European Community member states and in any countries with comparable legislation www tissot ch 3 3 T TISSOT SWISS WATCHES SINCE 1853 156_EN 02 14
Download Pdf Manuals
Related Search