Powerplus POWX0400 power sander
Contents
1. 5 8 1 CIC AIAG oiai E E E R 5 9 TECHNICAL DATA 5 10 oes basen A E A A A E E 5 11 SERVICE DEPARTMENT 5 12 6 13 6 14 6 15 DECLARATION OF CONFORMITY 7 Copyright 2014 NV Page 1 www varo com POWERPLUS POWx0400 EN FINISHING SANDER POW X0400 1 APPLICATION The sander is used to sand and buff wood plastic and similar materials It is very important to use the correct sandpaper It is not designed for commercial use before using the appliance for your own safety Your power tool should only be passed on together with these instructions WARNING Read this manual and general safety instructions carefully DESCRIPTION Front handle 4 Paper clamp On off switch 5 Base with hook amp loop Dust box PACKAGE CONTENT LIST Remove all packing materials Remove remaining packaging and transit supports if existing Check the completeness of the packing content Check the appliance the power cord the power plug and all accessories for transportation damages Keep the packaging materials as far as possible2. Copyright 2014 VARO NV Page 5 www varo com POWERPLUS POWx0400 EN 2 STORAGE Thoroughly clean the whole machine and its accessories Store it out of the reach of children in a stable and secure position in a cool and dry place avoid too high and too low temperatures Protect it from exposure to direct sunlight Keep it in the dark if possible Don t keep it in plastic bags to avoid humidity build up a WARRANTY This product is warranted for a 36 month period effective from the date of purchase by the first user This warranty covers all material or production flaws excluding batteries chargers defective parts subject to normal wear amp tear such as bearings brushes cables and plugs or accessories such as drills drill bits saw blades etc damage or defects resulting from maltreatment accidents or alterations nor the cost of transportation Damage and or defects resulting from inappropriate use also do not fall under the warranty provisions We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool Repairs may only be carried out by an authorised customer service centre for Powerplus tools You can always obtain more information at the number 00 32 3 292 92 90 Any transportation costs shall always be borne by the customer unless agreed otherwise In writing At the same time no claim can be made on the warranty if the damage of the device is the result of negligent ma
3. the power tool if the switch does not turn it on and off Any power tool that cannot be controlled with the switch is dangerous and must be repaired Disconnect the plug from the power source before making any adjustments changing accessories or storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally Store idle power tools out of the reach of children and allow persons unfamiliar with the power tool or these instructions to operate the power tool Power tools are dangerous in the hands of untrained users Maintain power tools Check for misalignment or sticking of moving parts breakage of parts and any other condition that may affect the power tool s operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to stick and are easier to control Use the power tool accessories and tool bits etc in accordance with these instructions and in the manner intended for the particular type of power tool taking into account the working conditions and the work to be performed Use of the power tool for operations different from intended could lead to a hazardous situation gt 7 5 5 Have your power tool serviced by a qualified repair person using o
4. POWERPLUS HIGH QUALITY TOOLS POWX0400 EN 1 2 2 2 PACKAGE CONTENT 2 4 o E 2 5 GENERAL POWER TOOL SAFETY 3 5 1 TOR A T E A T T A 3 5 2 EICCUICAl salo y ce ee 3 5 3 Personal wiisicterecisce escent ees 3 5 4 Power tool use and 4 5 5 GO 4 6 SPECIFIC SAFETY 4 7 _ 4 7 1 SWIER ON and OTT iesise 4 7 2 Fitting the hook and loop 4 7 3 Fitting with wisasecacesenteancestcaneventeancudstesddvandesadbncteswiuaddeasdudeberdduecdesscieass 4 7 4 Fitting dust collection EER 5 8 CLEANING AND
5. e you to lose control 5 2 Electrical safety Always check that the power supply corresponds to the voltage on the rating plate Power tool plugs must match the outlet Never modify the plug in any way Do not use adapter plugs with earthed grounded power tools Unmodified plugs and matching outlets will reduce risk of electric shock Avoid body contact with earthed or grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is earthed or grounded Do not expose power tools to rain or wet conditions Water entering a power tool will increase the risk of electric shock Do not abuse the cord Never use the cord for carrying pulling or unplugging the power tool Keep cord away from heat oil sharp edges or moving parts Damaged or entangled cords increase the risk of electric shock When operating a power tool outdoors use an extension cord suitable for outdoor use Use of a cord suitable for outdoor use reduces the risk of electric shock f operating a power tool in a damp location is unavoidable use a residual current device RCD protected supply Use of an RCD reduces the risk of electric shock 5 3 Personal safety Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool while you are tired or under the influence of drugs alcohol or medication A moment of inattention while operating pow
6. er tools may result in serious personal injury Use safety equipment Always wear eye protection Safety equipment such as dust mask non skid safety shoes hard hat or hearing protection used whenever conditions require will reduce personal injuries Avoid accidental starting Ensure the switch is in the off position before plugging in Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents Remove any adjusting key or wrench before turning the power tool on A wrench or a key left attached to a rotating part of the power tool may result in personal injury Do not overreach Keep proper footing and balance at all times This enables better control of the power tool in unexpected situations Dress properly Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from moving parts Loose clothes jewellery or long hair can be caught in moving parts Copyright 2014 VARO NV 3 www varo com POWERPLUS re EN HIGH QUALITY TOOLS If devices are provided for the connection of dust extraction and collection facilities ensure these are connected and properly used Use of these devices can reduce dust related hazards 5 4 Power tool use and care not force the power tool Use the correct power tool for your application The correct power tool will do the job better and safer at the rate for which it was designed Do not use
7. intenance or overload Definitely excluded from the warranty is damage resulting from fluid permeation excessive dust penetration intentional damage on purpose or by gross carelessness inappropriate usage use for purposes for which the device is not suitable incompetent usage e g not following the instructions given in the manual inexpert assembly lightning strike erroneus net voltage This list is not exhaustive Acceptance of claims under warranty can never lead to the prolongation of the warranty period nor commencement of a new warranty period in case of a device replacement Devices or parts which are replaced under the warranty therefore remain the property of Varo NV We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained Clean ventilation slots carbon brushes serviced regularly etc Your purchase receipt must be kept as proof of date of purchase Your appliance must be returned undismantled to your dealer in an acceptably clean state in its original blow moulded case if applicable to the unit accompanied by proof of purchase 14 ENVIRONMENT Should your machine need replacement after extended use do not put it in the domestic waste but dispose of it in an environmentally safe way Waste electrical products should not be disposed of with household waste Please recycle where facilities exist Check with your Local Autho
8. nly identical replacement parts This will ensure that the safety of the power tool is maintained SPECIFIC SAFETY WARNINGS Always wear safety goggles and a dust mask during your work with the finishing sander Always secure the workpiece by clamps or else to avoid slipping away Always keep the holes in the baseplate clean from dust Always connect a vacuum cleaner to the attached adaptor during your work 7 OPERATION 7 1 Switch on and off Connect the plug to the power supply Switch the power tool on push the ON OFF switch button forwards onto the I position Switch the power tool off pull the ON OFF switch button backwards to the O position E g 9 7 2 Fitting the hook and loop system To attach sand paper first remove all dirt from the sanding plate Attach the sand paper using the hook and loop system on sanding plate Make sure the perforations in the paper resemble those on the sanding plate 7 3 Fitting with paper clamps Open the paper clamps on both sides of the sanding plate Copyright 2014 VARO NV Page 4 www varo com POWERPLUS POW X0400 EN HIGH QUALITY TOOLS Place a new sanding paper on the sanding plate and fasten one clamp first Press the sand paper against the sanding plate bend the other end and fasten the second clamp 7 4 Fitting dust collection box Pull and slide dust collection box over the dust extraction port There are release buttons the sides of the
9. rear cover Using your fingers press the release button in and pull the rear cover off 8 CLEANING AND MAINTENANCE Attention Before performing any work on the equipment pull the power plug 8 1 Cleaning Keep the ventilation slots of the machine clean to prevent overheating of the engine Regularly clean the machine housing with a soft cloth preferably after each use Keep the ventilation slots free from dust and dirt If the dirt does not come off use a soft cloth moistened with soapy water Never use solvents such as petrol alcohol ammonia water etc These solvents may damage the plastic parts 9 TECHNICAL DATA Voltage 230 240 V AC 50 Hz Power input 220 W Sanding area 187 x 90 mm No Of vibrations 12000 min 1 Weight 1 5 kg Protection class 10 NOISE Noise values measured according to relevant standard K 3 Acoustic pressure level LpA 86 dB A Acoustic power level LwA 97 dB A ATTENTION Wear hearing protection when sound pressure is over 85 dB A aw Vibration Max 10 4 m s 1 5 m s SERVICE DEPARTMENT Damaged switches must be replaced by our after sales service department the connecting cable or mains plug is damaged it must be replaced by a particular connecting cable which is available from our service department Replacement of the connecting cable must only be carried out by our service department see last page or by a qualified person qualified electrician
10. rity or retailer for Nxt advice Copyright 2014 NV Page 6 www varo com POWERPLUS 400 OF CONFORMITY VARON V Joseph Van Instraat 9 2500 Lier BELGIUM declares that Product Finishing Sander Trade mark POWERplus Model POWX0400 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives based on the application of European harmonized standards Any unauthorized modification of the apparatus voids this declaration European Directives including if applicable their amendments up to the date of signature 2011 65 EU 2006 42 EC 2004 108 EC European harmonized standards including if applicable their amendments up to the date of signature EN60745 1 2009 EN60745 2 4 2009 EN55014 1 2006 EN55014 2 1997 EN61000 3 2 2006 EN61000 3 3 2008 Keeper of the Technical Documentation Philippe Vankerkhove VARO Vic Van Rompuy N V The undersigned acts on behalf of the company CEO pem Y Se A Philippe Vankerkhove Regulatory Affairs Compliance Manager Date 29 05 2013 Copyright 2014 VARO NV 7 www varo com
11. till the end of the warranty period Dispose it into your local waste disposal system afterwards E E 0 WARNING Packing materials are no toys Children must not play with plastic bags Danger of suffocation 1 x Finishing Sander 1 x Instruction Manual 1 x Sanding paper 4 SYMBOLS In this manual and or on the machine the following symbols are used Denotes risk of personal injury Wear a mask In dusty or damage to the tool conditions In accordance with essential Read manual before use requirements of the European directive s Class 11 The machine is double insulated Earthing wire is therefore necessary Copyright 2014 VARO NV Page 2 www varo com POWERPLUS POWx0400 EN 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions Failure to follow all warnings and instructions may result in electric shock fire and or serious injury Save all warnings and instructions for future reference The term power tool in the warnings refers to your mains operated corded power tool or battery operated cordless power tool 5 1 Work area Keep work area clean and well lit Cluttered and dark areas invite accidents Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep children and bystanders away while operating a power tool Distractions can caus
Download Pdf Manuals
Related Search