Philco PSF 341 freezer
Contents
1. 2011 Fast CR a s Revision 07 2011 e The appliance is too loud e sthe appliance standing firmly on the floor is the operation of the appliance causing vibrations of nearby furniture or other objects Check that all the parts mounted on the rear wall can vibrate freely e Carefully move the contact part away or increase the distance between the appliance and the obstacle e Are the removable parts securely inserted in the appliance e Are containers or compartments touching NOTE The noise of the coolant flowing in the circuit cannot be removed Under no circumstances is it possible to make technical type changes or attempts at repairs yourself EN 17 Copyright 2011 Fast CR a s Revision 07 2011 PART 9 RATING LABEL TECHNICAL SPECIFICATIONS The rating label with all the technical specifications is located on the side of the inside wall or on the rear side of the appliance Technical specifications Model PSF 341 Climatic class N Net volume 341 Operating voltage 220 240V 50 Hz Maximum power W 90W Power consumption 0 42 kWh 24h Freezing capacity 2kg 24h Noise level dB 41 dB Dimensions h x w x d cm 51x44 x 49 cm Weight 16 kg NOTE All the here mentioned data is subject to change EN 18 Copyright 2011 Fast R a s Revision 07 2011 INSTRUCTIO2. Any unqualified tampering with the product may cause a fire hazard Check that there is no mechanical interruption or effect on the coolant circulation namely in the accessible parts around the compressor Only professionally qualified persons may work on the cooling system EN 7 Copyright 2011 Fast CR a s Revision 07 2011 Cleaning before use Check that you have removed from the appliance all adhesive tape used to hold accessories Then clean all the inside parts using lukewarm water with a neutral cleaning agent vinegar or sodium carbonate in this way you will remove the characteristic odour of new parts then dry carefully Do not use detergents or aggressive agents which could damage the surfaces Electrical connection Before connecting the power plug to the power socket check that e Your hands are completely dry e The voltage and frequency shown on the rating label of the appliance corresponds to that in the home power grid permitted tolerance from 6 to 6 for nominal voltage for use with different voltages use a voltage changer with the corresponding parameters The cord and the plug are not damaged or caught under heavy objects The power cord is not excessively tensioned it is not permitted to use an extension cord Do not connect the appliance to a voltage rectifier e g solar power plant or use an extension cord The appliance must be connected to a working grounding lead If the power socket of
3. for fast freezing of very warm meals The temperature needs to be set based on e Temperature in the room where the appliance is located e Amount of food stored e Number of times the appliance is opened We recommend the middle settings Soon you will find out the optimal setting for your requirements A correct temperature setting is important for storing food Food spoil very quickly because of micro organisms which is possible to prevent or delay by the use of a correct storage temperature Temperature affects the growth rate of the micro organisms These process are slowed down by a declining temperature For this reason we recommend the middle settings of the thermostat EN 10 Copyright 2011 Fast R a s Revision 07 2011 PART 5 ARRANGEMENT OF FOOD e Appropriate wrapping materials for food are plastic containers aluminium foil polyethylene freezing bags etc e Always allow hot dishes to cool down before placing them into the freezer e Open the door only for a short time so that the inside area of the fridge is not heated This saves energy e Never store explosive materials or products with flammable compressed gasses e g whipped cream sprayers with pressurised capsules cartridges spray cans DANGER OF EXPLOSION Storage of frozen food If you haveturned on the freezer for the first time or you have just defrosted it turn the temperature thermostat to position Super at least for 2 hours before p
4. DO WHEN eee eee entente tnnt nensis NRSR s osn tn nosna 16 PART 9 RATING LABEL TECHNICAL SPECIFICATION S eere eerte eret tnn onines sto enean satanas 18 EN 1 Copyright 2011 Fast R a s Revision 07 2011 PART 1 BEFORE PUTTING INTO OPERATION Safety notice Symbols Q General advice for the optimal operation of the appliance A General dangers AN Hot surfaces Before you put the appliance into operation e Carefully study the user s manual and installation instructions before installing and using the appliance This user s manual includes important information regarding the installation operation and maintenance of the appliance Store the user s manual also for future reference or for other owners of the appliance if the appliance is sold cooling circuit For this reason allow the appliance to rest in a vertical position for 12 hours before turning it on so that the oil flows back into the compressor After unpacking the appliance carefully inspect that it has in no way been damaged Also check that the power cord is not damaged If you discover any defects turn off the appliance and contact the vendor or in the case of a damaged power cord contact the service centre If the appliance and all its parts are in order install it according to the instructions in the relevant chapter If the appliance is transported in a horizontal position the oil from the compressor may leak into the
5. Risk of injury and damage e Consume ice cream only several minutes after removing it from the freezer you will avoid injury to your lips and tongue Do not touch the inside of the freezer if you have wet hands Important information e Place only properly wrapped food into the freezer e When storing deep frozen food intended for immediate consumption note the expiry date marked by the manufacturer e Remember that only quality fresh food are suitable for freezing e Freeze fresh food in appropriately sized portions e Ensure that you use an appropriate wrapping material plastic wrap aluminium foil freezing bays EN 11 Copyright 2011 Fast CR a s Revision 07 2011 Push all air out of the packages To close the packages use rubber bands plastic clips tie wire or adhesive tape resistant to cold Plastic bags and tubes can also be closed using a food sealing appliance On the closed package write down the contents weight and date of freezing Before placing plastic bags into the freezer check that they are dry so as to prevent them from freezing to each other e To prevent partial defrosting place the food that is to be frozen in such a way that it is not touching the already frozen food e Do not refreeze fully or partially defrosted food apart from the case where they were heat processed cooked or fried baked e Do not consume food that have been stored for a period longer than their expiry date You may
6. Correct installation e g levelling the capacity of the system correspond to the specifications on the rating label of the appliance Table Climatic class Climatic class Ambient temperature SN 10 C to 32 C N 16 C to 32 C ST 16 C to 38 C T 16 C to 43 C EN 6 Copyright 2011 Fast CR a s Revision 07 2011 Location The location for the placement of the appliance must meet the requirements in the paragraph Operating conditions and must have a stable floor with a load bearing capacity corresponding to the weight of the appliance Furthermore you must maintain distances and dimensions of the appliance so that correct operation is ensured 1 Top part at least 20 cm 2 Rear part at least 10 cm 3 The wall on the side where the door opens at least 30 cm Level the appliance using the adjustable feet ensure there is a gap between the bottom edge of the appliance and the ground so that there is sufficient circulation of the cooling air by which you will ensure the optimal performance of the cooling circuit Check whether any cooling circulation pipes have been damaged during the installation e Use the appliance only for the purposes for which it has been designed e The appliance must be located on a rigid and even surface In this way you will ensure free circulation of the coolant and effective operation of your appliance e f possible place the appliance into a cool
7. FREEZER USER S MANUAL PHILCO K Famous for Quality the World Over PSF 341 Dear customer Thank you for buying a PHILCO brand product So that your appliance serves you well please read all the instructions in this user s manual CONTENTS PART 1 BEFORE PUTTING INTO OPERATION eene eene entente tntn tnnt ta non esent tais s n enean tatnen en ono nen 2 SATS oe AA 2 s Safetymstructionsfor gas RGO zmieniane a a nn 4 PART 2 DESCRIPTION OF THE PRODUCT eese esee esent ss nn sn K enses es nos tson nte 5 PART 3 INSTALLATION P 6 e ransportand unpacklng sssusa ra a AR ENESE AEE Aa E NI N ON ENTE RE 6 e Placement e Cleaning before use e Electrical connection e Procedure for switching the door opening directi issii 9 PART 4 SETTING THE TEMPERATURE eese esent sn SN ss s s st n nos 10 PART 5 ARRANGEMENT OF Food eere eee es esent asare nae HRE aenea stats ss enses tnis inen ausu 11 s Storage OF frozetifood issoeedesunse so i ti edteistcnite ueiriestetel lette vi serebeteed pee leo ehe biete eer brote bet 11 s Chartonstoring food in the freezer icti ctt titel vraha 12 Uii cd c onen ne 13 PART 7 REGULAR MAINTENANCE ee eene enean RR Ross s snake 14 s cleaning the freezer oerte pute rani ertet eA UII E e Pepe TENIA 14 PART 8 WHAT SHOULD I
8. NS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product its accessory or packaging indicates that this product shall not be treated as household waste Please dispose of this product at your applicable collection point for the recycling of electrical amp electronic equipment waste Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health which could be caused as a result of improper liquidation of waste Please ask your local authorities or the nearest waste collection centre for further details The improper disposal of this type of waste may fall subject to national regulations for fines For business entities in the European Union If you wish to dispose of an electrical or electronic device request the necessary information from your seller or supplier Disposal in other countries outside the European Union If you wish to dispose of this product request the necessary information about the correct disposal method from local government departments or from your seller C This product meets a
9. a s Revision 07 2011 explosive contaminating or volatile substances There is a danger of explosion Do not store liquids inside bottles and cans especially beverages containing carbon dioxide inside A Do not place food inside the freezer containing flammable propulsion gases e g sprays and no PPP the freezer compartment The bottles and cans could crack Store liguors only with a firmly tightened cap and in a vertical position Do not use the base drawers doors of the appliance etc as a step or as a support There is a danger of injury to persons or damage to the appliance Ensure that the plastic parts of the appliance and the door seals are not soiled with oil or grease with oil or grease The plastic parts and the seals would then become porous Do not consume frozen food immediately after taking them out of the freezer compartment There is a danger of frost bite Avoid prolonged hand contact with frozen food ice or evaporating pipes There is a danger of frost bite and freezing to these objects We do not recommend placing hot liquids or food inside the freezer and filling containers all the way to the rim Do not put fragile heavy or unstable objects on the freezer Children in the household Never leave packaging and its parts with the children There is a danger of poisoning or suffocation by the cardboard boxes and plastic sheets This appliance is in no way a toy for children For appliances with door lo
10. ance has been tested in accordance with the directives in force in the European Union The tightness of the cooling circuit has been verified This appliance conforms to the relevant safety provisions for electrical appliances in force in the European Union EN 3 Copyright 2011 Fast CR a s Revision 07 2011 Technical safety The appliance contains a cooling gas ISOBUTHAN R600a Only transport or move the appliance A with the utmost care prevent excessive impacts and shaking to prevent damaging the appliance If the cooling circuit becomes damaged and the cooling gas may be escaping there is a risk of an explosion which may be ignited by a spark or flame If the appliance shows signs of damage it must not be putinto operation In such a case contact the service centre ventilate the room where the appliance is located and prevent the spreading of flames or other interference with the appliance Safety instructions for gas R600a Measures in case of an unexpected release If ventilation is possible allow the material to evaporate Characteristics of the gas The gas is highly flammable it is necessary to completely prevent contact with an open flame and hot surfaces Because the R600a gas is heavier than air it may become very concentrated at the level of the ground where ventilation is weak First aid Inhalation Take the affected person from the contaminated area to a warm well ventilated location Staying in a co
11. as the temperature rises Contact the service department only when after analysing all possible factors of the malfunction you cannot find any cause for the malfunction or you are unable to remedy the malfunction yourself So first focus on What should I do when EN 15 Copyright 2011 Fast CR a s Revision 07 2011 PART 8 WHAT SHOULD I DO WHEN a The appliance is not working Please check the following Is the power plug in good condition and properly plugged into the power socket Is there electricity flowing into the power cord Check this possibility by connecting a small appliance like a hand mixer or hair fan etc Is the appliance turned on Is the mains fuse circuit breaker in the home turned on or screwed in b The appliance does not freeze sufficiently The compressor turns on too frequently Please check the following c Did you allow the freezer stand for at least 12 hours before turning it on If not Pull out the power plug with the doors closed tilt the appliance to one side and hold it or place it in a tilted position and then back to the even position After a period of 12 hours has passed turn it on again for this period of time do not open the doors If the doors close properly the seal on the doors sits firmly and evenly on the frame Test Place a sheet of paper between the seal and the frame then close the door It should be difficult to pull out this sheet of paper on a
12. cause yourself food poisoning Chart on storing food in the freezer Food Storage method Zone Durability Storing frozen food ice cubes and ice creams Original packaging well sealed Top part of the freezer Depends on expiry date Frozen food meat and fish Original packaging well sealed Food containers suitable for low temperatures hermetically sealed Best in the bottom part of the freezer Beef 12 months Pork 12 months Minced pork 6 months Rabbit 6 months Veal 9 months Mutton 9 months Poultry 6 months Fish 6 months Frozen food pasta dishes fruit vegetables confectionery EN 12 Copyright 2011 Fast R a s Food containers suitable for low temperatures hermetically sealed Top part of the freezer 6 12 months Revision 07 2011 PART 6 DEFROSTING Disconnect the power cord from the power socket Open the doors and take out all the food and place it in a cool place Using the plastic scraper remove the ice from the walls of the freezer or allow the ice to naturally melt away Then wipe out the remaining ice and water wipe dry and connect the power cord to the power socket A NOTE Do not use sharp objects for the removal of frozen food or ice the wall of the freezer could be scratched When defrosting a freezer never use electric appliances such as hair fans hot air fans steam cleaners de icing sprays or open flames e g candle
13. cks do not leave keys within the reach of children If you will no longer be using the freezer remove the door seals and store it in a safe place In this way you will prevent the danger of children becoming trapped inside the freezer Maintenance and cleaning A Before you begin with regular or exceptional maintenance disconnect the appliance s power cord or turn off the fuse or circuit breaker Never pull the electric power cord only pull on the power plug Do not use mechanical or any other devices except for devices recommended by the manufacturer for the purpose of accelerating the defrosting process Do not defrost or clean the appliance using a steam cleaning device The steam may come into contact with the electric components inside the appliance where a short circuit could occur There is a danger of electric shock Do not remove the frozen ice layer and frozen on food using a knife or a sharp object This could damage the cooling medium pipes The escape of the cooling medium may cause eye injuries or may catch on fire General instructions This appliance must not be used by persons including children with physical sensory or psychological impairments or by inexperienced persons unless properly trained or schooled in the safe use of the appliance or unless they have been properly supervised by a person who will be responsible for their safety Children should be supervised so as not to play with the appliance This appli
14. e When installing the appliance in its place or when moving the appliance the power cord could be penetrated or damaged Check that the power cord is not interfering anywhere e Before connecting the appliance to the electricity power source check that the capacity of the system corresponds to the specifications on the appliance s rating label e Any kinds of home electric wiring necessary for the connection of the appliance must only be carried out by a qualified electrician N If you move the appliance from its usual position it is necessary to understand that although you have disconnected the power cord the components on the rear side of the appliance may remain very hot for some time e This appliance is not designed to be built in Do not cover or block the air inflow or outflow openings Insufficient ventilation will cause bad operation and damage to the appliance Operating the appliance e Use the appliance only for the purposes for which it has been designed This appliance is designed only for household use for storing or freezing food and for preparing ice e Temperature inside the freezer may rise or fall slightly and so these appliances are not suitable for storing e products e g medicines which require a stable temperature Do not use any other electric appliances e g heating elements electric ice cream machines etc inside the appliance There is a danger of explosion EN 2 Copyright 2011 Fast CR
15. hannel From time to time clean out the drainage opening using a cotton bud e Cleaning water should not run through the drainage channel for defrosted water This causes the evaporation bowl to overflow and cleaning water flows on to the floor Taking out of operation for an extended period If you are not going to use the freezer for an extended period of time do the following Disconnect the freezer from the power source by pulling it out of the power socket Clean out and dry the interior as described in the section about cleaning the freezer Leave the door open to prevent an unpleasant odour forming inside EN 14 Copyright 2011 Fast CR a s Revision 07 2011 A Please be aware Compressor The compressor is controlled by the thermostat which is set by the temperature dial and turns itself on automatically when temperatures inside the appliance is exceeded and then turns itself off as soon as it again reaches this temperature When any compressor cooling system is turned on noise can be heard These sounds are made when the motor in the compressor is working and they are also made by the coolant circulating in the circuit of the cooling system These noises are normal and do not indicate any malfunction in the operation of the appliance In unheated rooms or in cold weather conditions condensate may form on the exterior walls of the appliance This does not indicate a malfunction and this condensate will disappear as soon
16. ive cleaning products Wash the freezer well and wipe dry Do not use cleaning waxes concentrated cleaning agents bleaches or cleaning products containing kerosene on the plastic or rubber parts Never use paper towels or window cleaners on the plastic parts Clean the inside of the appliance at regular intervals e Werecommend that the freezer is cleaned every time it is defrosted e Take out all the food and place them in a cool place e Remove all removable parts from the appliance e Various parts inside the freezer are generally not suitable for washing in a dishwasher These parts should be washed in warm water with dish washing detergent Never use an undiluted cleaning detergent and under no circumstances use abrasive or acidic i e chemical cleaning agents We recommend a general purpose detergent with a neutral pH The use of steam cleaning appliances is extremely dangerous and so is strictly forbidden e Wipe the inside area and the accessories with clean water and dry everything using a dry cloth Then allow the appliance to ventilate for 3 4 minutes e Donotdamage or remove the rating label on the rear side of the appliance it is important for connection repairs and subsequent disposal of the appliance e Ensure that water does not come into contact with parts inside the appliance that are under live electric current e Ensure that the water from the defrosting process can flow away freely through the drainage c
17. ll sides Call an authorised service centre if it is possible to pull out the paper without resistance at one or more points Formation of larger ice layers on the inside walls of the freezer Is the appliance exposed to direct sunlight or is it located too close to a heat source stove heater etc Protect the appliance against direct sunlight check the distance from the heat source place a sheet of insulation between the appliance and the heat source See Placement Has the appliance been filled with too much fresh food Is the air circulation and ventilation in order Check that the ventilation grill is not covered or that the heat exchanger condenser on the rear side is not covered in dust Frozen food is defrosting because the temperature in the freezer is too high Has the room temperature fallen below the temperature for which the appliance is designed If the room temperature is too low the freezer unit runs less frequently For this reason the temperature in the freezer section may be higher Increase the room temperature d A strong layer of ice formed in the freezer Check that the freezer section is properly closed If the frozen food has frozen on to the freezer pry them away using a dull object e g with a spoon handle Allow the freezer to defrost and then clean it out see chapter Defrosting An excessively thick layer of ice reduces cooling capacity which increases power consumption EN 16 Copyright
18. ll the basic EU regulation reguirements that relate to it Changes to the text design and technical specifications may occur without prior notice and we reserve the right to make these changes EN 19 Copyright 2011 Fast CR a s Revision 07 2011 NOTES EN 20 Copyright 2011 Fast R a s Revision 07 2011 NOTES EN 21 Copyright 2011 Fast CR a s Revision 07 2011 EN 22 Copyright 2011 Fast CR a s Revision 07 2011
19. nd turn the bottom hinge 2 around Then with the help of two screws 8 fasten the bottom hinge 2 on the left hand side in the bottom part of the frame Insert the screw pin 9 into the bottom hinge 2 Seat the door in location and ensure that it is seated on the bottom hinge 2 Hold the door in the closed position and with two screws 1 attach the top hinge 5 at the top of the frame on the left hand side Remember not to tighten the two screws 1 until the top side of the door is level with the opposite side Place the cover 6 over the top hinge PICTURE 1 PICTURE 2 PICTURE 1 SHOWS THE POSITION OF THE PICTURE 2 SHOWS THE POSITION OF THE COMPONENTS BEFORE THE DOOR IS SWITCHED COMPONENTS AFTER THE DOOR IS SWITCHED NOTE We recommend that the door change procedure is performed by at least two people EN 9 Copyright 2011 Fast R a s Revision 07 2011 PART 4 SETTING THETEMPERATURE Set the temperature in the freezer using the temperature control knob The thermostat control module is connected to the compressor Turn the temperature control knob upwards or downwards and set the temperature inside the freezer Temperature set to the lowest value is the warmest and the temperature set to the highest value is the coldest NORMAL MIN e MAX L SUPER Position Min cold Position Normal colder The standard setting is in this position Position Max coldest Position Super
20. ntaminated location for a long time may cause suffocation or potentially loss of consciousness If necessary provide mouth to mouth resuscitation and in exceptionally serious situations under expert medical supervision give oxygen Contact with the skin Random contact with the skin will not endanger health it is better to thoroughly wash the affected area The liquid spray or dispersed liquid may cause frost bite wash the affected area with large amounts of water and contact a medical doctor Contact with the eyes If eyes have been affected wash out with large amounts of water while trying to keep the eyes open and call a specialised doctor as soon as possible If contact or inhalation of the R600a gas occurs contact your medical doctor EN 4 Copyright 2011 Fast CR a s Revision 07 2011 PART 2 PRODUCT DESCRIPTION 2 3 1 Shelf 2 Temperature thermostat at the rear side of the freezer 3 Levelling feet 4 Hinge cover 5 Seal EN 5 Copyright 2011 Fast R a s Revision 07 2011 PART 3 INSTALLATION Transport and unpacking If the appliance is transported in a horizontal position the oil from the compressor may leak into the cooling circuit For this reason allow the appliance to rest in a vertical position for 12 hours before turning it on so that the oil flows back into the compressor Remove the external packaging remove the protective plastic film from the surface of the appliance if
21. s The plastic interior could melt and the resulting foam gas could be ignited from a spark or an open flame Never use a steam cleaner to melt a layer of ice in the appliance high risk of injury by electrical shock Remove the frozen food and wrap into several newspaper layers Place the frozen food in a cold place in a container until it is possible to use the freezer again Leave the freezer door open Ice deposit layers form in the freezer during the normal course of operation After exceeding a certain thickness they function as insulation and interrupt heat transfer Do not scratch the ice deposit layer because you could damage the evaporation surface Perform the defrosting process as fast as possible to prevent the removed food from defrosting Constantly remove water using a sponge You can speed up the defrosting process by placing a bowl with hot water not boiling into the freezer In this case close the freezer door As soon as the freezer has been fully defrosted empty the water accumulated in the bowl into a kitchen sink Wipe the freezer area until dry and return the food Connect the appliance to the power socket EN 13 Copyright 2011 Fast CR a s Revision 07 2011 PART 7 REGULAR MAINTENANCE Cleaning the freezer Before starting to clean the freezer disconnect it from the power source Use a clean sponge or a soft cloth and a gentle washing detergent dissolved in warm water Do not use coarse or abras
22. the home system is not grounded in accordance with the current legal regulations connect the appliance after consulting a specialised technician to the grounding lead itself The manufacturer takes no responsibility for injuries caused as a result of not following these instructions gt gt If you do not correctly level the freezer during the installation the door may not close shut and seal A properly which may cause problems with the cooling ice build up or moisture Levelling the freezer is very important Level the freezer using the adjustable feet turn them clockwise to lift the freezer and turn them anticlockwise to lower the freezer EN 8 Copyright 2011 Fast CR a s Revision 07 2011 Procedure for switching the door opening direction The freezer is assembled with the door hinges on the right hand side If you wish to change the door opening direction follow the instructions below 1 DV Gi D o w First remove the top hinge cover 6 Remove two screws 1 fastening the top hinge 5 on the right hand side to the frame Remove the top hinge 5 Lift the door and place it on a soft underlay so that it does not get scratched Remove two screws 8 fastening the bottom hinge 2 and remove the bottom hinge 2 Remove the front left foot 4 and move it to the right hand side Remove the opening cover plate 7 on the right hand side Before attaching the bottom hinge 2 remove the screw pin 9 a
23. used and clean the external parts of the appliance with an agent designed for this purpose Do not use steel wool or any coarse agents which could irreparably damage the surface of the appliance Carefully remove all papers and adhesive tape from the appliance doors and other parts packed in polystyrene Remove documents and accessories from inside the appliance The packaging material is recyclable and is marked with a recycling symbol For disposal follow the local regulations Packaging materials plastic bags polystyrene parts etc must be kept out of the reach of children because they present a possible source of danger Carefully inspect the appliance If you discover any faults stop the installation and contact the vendor Operating conditions The proper operation of the appliance the freezing temperatures are guaranteed only when the following conditions are met e The temperature in the room where the appliance is located conforms to the climate class stated on the appliance s rating label e Maximum ambient relative humidity 90 The appliance must be placed at a sufficient distance from heat sources e g baking ovens central heating direct sunlight etc The appliance must be located in such a place that it is protected against weather effects Regular maintenance is performed according to the instructions in this user s manual The ventilation openings in the cover of the appliance must not be covered by anything
24. utting food into the freezer All frozen food must be put into the freezer as soon as possible after being purchased so that it does not defrost and cause potential contamination Store frozen products according to the manufacturer s instructions on the packaging Pay increased attention to handling the drawer so that you do not damage the cooling circuit Placing fresh food into a freezer Ensure that the freezer is clean as the freezing process itself does not sterilise food We recommend freezing food in the original packaging or in various containers suitable for freezing or in special freezer bags Never place hot or warm dishes into the freezer Allow dishes to fully cool down before placing them into the freezer wrap them in a plastic bag aluminium foil or put them in a jar Check the label on the freezer to check how many kilos of fresh food at a room temperature of 25 C the freezer is able to freeze in 24 hours Never insert more food than the permitted amount A Never place bottles with fizzy drinks into the freezer or any other bottles For better freezing results give the food sufficient room for air circulation We recommend a setting between the medium and maximum value for standard use and for long term storage of food in the freezer A ATTENTION e Do not store cans and bottles with beverages containing carbon dioxide in the freezer The contents expand during the freezing process which may rip the bottle or can apart
25. well ventilated and dry room e Do not locate the appliance in direct sunlight or in a room with a high temperature in the vicinity of any sources of direct heat such as heating an oven a stove etc this would mean that the compressor would need to work a lot harder resulting a substantially higher power consumption level If itis not possible to prevent the installation in the vicinity of a heat source we recommend the insertion of an appropriate insulating board do not use asbestos between the appliance and the heat source or at least to maintain the following minimum distances e From a gas or electric stove 3 cm e From a heater or oven etc 30 cm e From another cooling appliance 2 cm Do not place any appliances on the appliance which release heat on to the appliance such as microwave Ovens toasters etc Never cover the ventilation grill Pull out the power plug by pulling on the plug itself never pull on the cord when disconnecting the appliance Before turning on the appliance allow it to stand in its final location for 12 hours the coolant circuit A will stabilise in this way and no operating problems will occur Before connecting the appliance to the power grid check that it is perfectly dry inside especially in the corners Warning against danger The coolant may be highly flammable depending on its composition The coolant circuit was hermetically closed and sealed and was tested many times for possible leaks
Download Pdf Manuals
Related Search