Home

Samsung BD-J5900

1. Troubleshooting Before requesting service please try the following solutions PROBLEM No operation can be performed with the remote control SOLUTION Check the batteries in the remote control They may need replacing Operate the remote control at a distance of no more than 20 feet from the player Remove the batteries and then hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it Reinstall the batteries and try to operate the remote control again The disc does not play Ensure that the disc is installed with the label side facing up Check the region number of the Blu ray Disc DVD The Disc Menu does not appear Ensure that the disc has disc menus The prohibition message appears on the screen This message appears when an invalid button is pressed The Blu ray Disc DVD s software doesn t support the feature e g angles You ve requested a title or chapter number or search time that is out of range Play mode differs from the Setup Menu selection Some of the functions selected in the Setup Menu may not work properly if those functions are not encoded on the disc You cannot change the screen aspect ratio screen size The Screen Ratio on your Blu ray Disc DVD Disc is fixed and cannot be changed This is not a problem with the player No audio Make sure you have selected the correct Digital Output in the Audio Op
2. 5 Go o Step 6 of The Setup Procedure in the first column amp NOTES The Home screen will not appear if you do not configure the player s settings during Setup except as noted below if you press the BLUE D button during network setup you can access the Home screen even if the network setup is not completed yet if you do not complete network set up during the initial Setup you can do it later See page 14 When you return to the Home screen the full screen mode is cancelled automatically If you want to display the Setup screen again to make changes press the amp button on the front panel of the player for more than 5 seconds with no disc inserted This resets the player to its default settings a After the Setup process is complete you can operate the HDMI CEC function If you want to use an Anynet HDMI CEC function to aid in the initial set up process please follow the instructions below Connect the player to an Anynet HDMI CEC compliant Samsung TV using an HDMI Cable 2 Set the Anynet HDMI CEC feature o On in both the TV and the player 3 Set the TV to the Setup Procedure if you leave the player in the stop mode for more than 5 minutes without using it a screen saver will appear on your TV If the player is eft in the screen saver mode for more than 25 minutes the power will automatically turn off Menu Navigation 3 2 4 o HOME
3. Causing Equipment Regulations Note to CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the National Electrical Code Section 54 of Canadian Electrical Code Part that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Complies with 21CFR 1040 10 except for deviations pursuant to Laser Notice No 50 dated June 24 2007 DANGER e VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM FDA 21 CFR CAUTION CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO THE BEAM IEC 60825 1 e THIS PRODUCT UTILIZES A LASER USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL CLASS 1 KLASSE 1 LUOKAN 1 LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LASER CLASE 1 KLASS 1 PRODUCTO amp NOTES if the Region number of a Blu ra
4. OPEN SHARED Security WPA PSK TKIP AES WPA2 PSK TKIP AES WPS PBC Supported Network speeds equal to or below 10Mbps are not supported Design and specifications are subject to change without prior notice Weight and dimensions are approximate Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www samsung com recyclingdirect or call 877 278 0799 28 including the Disc Type and Characteristics section of this user manual disc types that can be played are pre recorded commercial BD ROM DVD VIDEO and Audio CD CD DA discs BD RE R DVD RW R discs and CD RW R discs Discs other than those listed above cannot be and are not intended to be played by this player Some of the discs listed above may not play due to one or more reasons provided below Samsung cannot guarantee that this player will play every disc bearing the BD ROM BD RE R DVD VIDEO DVD RW R DVD RW R and CD RW R logos and this player may not respond to all operating commands or operate all features of every disc These and other disc compatibility and player operation issues with new and existing format discs are possible because Blu ray is a new and evolving format This player may not operate all Blu ray features because 1 some features may be optional 2 additional features may have been added to the Blu ray Disc format after the production of this player and 3
5. AK68 02560A AK59 00149A Remote Control Remote Control ns Tour ofthe Remote Control Connecting to a TV Turn the TV on and off Connect an HDMI cable not supplied from the HDMI OUT jack on the back This button is only available for Samsung TVs After setup allows you to set the input of the product to the HDMI IN jack on your TV source on your TV 5 eb xl are tor Smaing Ts Do not connect the power cord to the wall outlet until you have made all This button is only available for Samsung TVs the other connections When you change the connections turn off all devices before you start Turn the player on and off Press to open and close the disc tray Press the number buttons to operate options Use to enter the disc menu Use to enter the popup menu title menu Press to search a disc backwards or forwards Press to pause a disc Press to move to the Home menu Use to access various audio functions on Press to switch the Blu ray Disc DVD s a disc Blu ray Disc DVD 7 subtitle language Press to skip backwards or forwards Press to stop a disc Press to play a disc Press to use the Tools menu Use to display the playback information when playing a Blu ray Disc DVDs Use to select menu items and change menu values Return to the previous menu Press to exit the menu These buttons are used both for menus on the player and also several Blu ray Disc functions Press to use the bo
6. ASSUMES ALL RISK AND LIABILITY FOR LOSS DAMAGE OR INJURY TO PURCHASER AND PURCHASER S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state To obtain warranty service please contact the SAMSUNG customer care center The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung reseller THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE PROHIBITED For a list of Samsung authorized retailers please go to http www samsung com us peaceofmind authorized_resellers html QUESTIONS OR COMMENTS COUNTRY CALL OR VISIT US ONLINE AT WRITE Sonn Samsung Electronics America Inc IN THE US 1 eae www samsung com us support 85 Challenger Road Ridgefield Park NJ 07660 ENERGY S
7. Button Press to move to the Home menu e RETURN Button Return to the previous menu Enter DIRECTION Button Move the cursor or select an item Activate the currently selected item Confirm a setting o EXIT Button Press to exit the current menu e Home Menu 11 Access and play VIDEOS Access and play MUSIC Access and change SETTINGS Change the Source Device Access SCREEN MIRRORING Access and view PHOTOS Play a DISC Access and use APPLICATIONS Access MORE APPLICATIONS amp NOTE The Videos Photos and Music options require that you have an appropriate disc in the player or a USB flash device attached to the player Accessing the Settings Menu To access the Settings menu and sub menus follow these steps 1 Press the POWER button The Home Menu appears 2 Press the AW d buttons to select Settings and then press the button 3 Press the AY buttons to select he desired submenu and then press the EJ button 4 Press the amp W buttons to select he desired item and then press he button 5 Press the EXIT button to exit the menu 12 amp NOTES The access steps may differ depending on the menu you selected The OSD On Screen Display may change in this player after you upgrade the software version Picture Settings You can configure various display options such as the TV Aspect Ratio Resolution etc 3D Settings S
8. Do not use the 3D function or 3D Active Glasses while walking or moving around Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects trip and or all and cause serious injury e If you want to enjoy 3D content connect a 3D device 3D compliant AV receiver or TV to the player s HDMI OUT port using a high speed HDMI cable Put on 3D glasses before playing the 3D content The player outputs 3D signals only through HDMI cable connected to the HDMI OUT port The video resolution in 3D play mode is limited to the resolution of the original 3D video You cannot change the resolution to your preference Some functions such as BD Wise screen size adjustment and resolution adjustment may not operate properly in 3D play mode You must use a high speed HDMI cable or proper output of the 3D signal Stay at least three times the width of the screen from the TV when watching 3D images For example if you have a 46 inch screen stay 138 inches 11 5 feet rom the screen Place the 3D video screen at eye level for he best 3D picture When the player is connected to some 3D devices the 3D effect may not unction properly his player does not convert 2D content into 3D Blu ray 3D and Blu ray 3D logo are trademarks of the Blu ray Disc Association SAFETY INFORMATION Warning 2 Precautions Using the 3D functions GETTING STARTED Before using
9. USB storage media containing MP3 or BD RE R WMA contents CD RW R Photos recorded on CD RW R DVD RW R BD PHOTO DVD RW R RE R or a USB storage media containing JPEG BD RE R contents amp NOTES The player may no recording conditions play certain CD RW R and DVD R because of the disc type or faDVD RW R has not been recorded properly in DVD video format it will not be playable Your player will no that exceeds 10 Mbps Your player will no at a bitrate that exceeds 25 Mbps Playback may not work for some types of discs or when you use specific functions such as angle change and aspect ratio adjustment Information about the discs is written in detail on the disc box Please refer to this if necessary When you play a BD J title loading may take longer than a normal title or some functions may perform slowly Disc types your player cannot play e HD DVD e DVD ROM PD MV etc e DVD RAM e Super Audio CD except CD layer e DVD RW VR mode 3 for Authoring e CVD CD ROM CDV CD G CD4 LD CD Gs play audio only not graphics play content that has been recorded on a DVD R at a bit rate play content that has been recorded on a BD R or USB device 9 GB DVD R Region Code Both players and discs are coded by region These regional codes must match for a disc to play if the codes do not match the disc will not play The Region Code for this player is displayed
10. a new software version available the player notifies you with a popup message 13 4 To upgrade the firmware remove any discs from the player Select Yes in the Pop up The player turns off automatically then restarts and begins the download Never turn the player on or off manually during an upgrade The update progress popup appears When the update is complete the player will restart automatically amp NOTES The upgrade is complete when the player turns off and then turns on again by itself Never turn the player off or on manually during the update process Samsung Electronics takes no legal responsibility for player malfunction caused by an unstable Internet connection or consumer negligence during software upgrade 20 Contact Samsung Provides contact information for assistance with your player Terms of Service Agreement Lets you view the general disclaimer regarding third party contents and services Reset Returns all settings to their factory defaults except for the network settings Play Playing a Commercially Recorded Disc 1 Press the amp button to open the disc tray 2 Place a disc gently into the disc tray with the disc s label facing up 3 Press the button to close the disc tray Playback starts automatically Playing Files on a USB Device There are two methods you can use to play or view multimedia files located on a USB d
11. front two speakers with Digital Output set to PCM Router Je Dem Lam e Broadband modem Method 2 al a amp NOTES Internet access to Samsung s software update server may not be allowed depending on the router you use or your ISP s policy For more information contact your ISP Internet Service Provider Method 1 DIGITAL AUDIO IN DSL users please use a router to make a network connection COAXIAL Wireless Network Wireless Router Broadband service NOTES 10 If your wireless router supports DHCP this player can use a DHCP or static IP address to connect to the wireless network Set your wireless router to Infrastructure mode Ad hoc mode is not supported The player supports only the following wireless security key protocols WEP OPEN SHARED WPA PSK TKIP AES WPA2 PSK TKIP AES Select a channel on the wireless router that is not currently being used If the channel set for the wireless router is currently being used by another device nearby it will result in interference and communication failure In compliance with the newest Wi Fi certification specifications Samsung Blu ray players do not support WEP TKIP or TKIP AES WPS2 Mixed security encryption in networks running in the 802 11n mode Wireless LAN by its nature may cause interference depending on the operating conditions router performance distance obstacles interference by other radio de
12. the User Manual Logos of Discs the player can play Accessories Front Panel ee 7 Rear Panel Remote Control CONNECTIONS Connecting to a TV Connecting to an Audio System Connecting to a Network Router SETTINGS The Setup Procedure Wired Network Wireless Network Menu Navigation Accessing the Settings Menu Picture Settings css Sound Settings Network Settings a System Settings Language Settings Security Settings General Settings x Support SEttiNGS 2 0cssseesasssisssienne MEDIA PLAY Playing a Commercially Recorded DISG namens 20 Playing Files on a USB Device 20 Playing a Disc with User Recorded aa iE pi ra re Using DLNA Controlling Video Playback Controlling Music Playback a Playing Photo Contents Using Netflix Using Pandora an Using YouTube APPENDIX Troubleshooting 27 Specifications Getting Started Before using the User Manual Disc Types and Contents your player can play Media Disc Type Details Blu ray Disc P ie 3D Blu ray Disc BD ROM or BD RE R recorded in the BD RE format VIDEO DVD VIDEO DVD VIDEO recorded DVD RW DVD RW V DVD DVD R R R that have been recorded and finalized or DVD RW a USB storage media containing MKV or MP4 DVD R contents CD RW R Music recorded on CD RW R DVD RW R BD MUSIC DVD RW R RE R or a
13. type of battery Replace only with the same or equivalent type e WARNING TO PREVENT THE SPREAD OF FIRE KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES e WARNING This product contains chemicals known o the State of California to cause cancer and reproductive toxicity To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture FCC NOTE for U S A This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio or television reception which can be determined by turning the equipment off and on The user is encouraged to try to correct the interference by one or more of the following measures e Reorienting or relocating the receiving antenna e Increasing the separation between the equipment and receiver e Connecting this equipment to an outlet that is on a different circuit than the one the receiver is connected to e Consulting the dealer or an experienced radio TV technician for help This class B digital product meets all requirements of the Canadian Interference
14. your computer Buttons on the Remote Control used for Music Playback NUMBER buttons Audio CD CD o DA only During Playlist playback press the desired track number The selected track is played Skip During playback press the Wor amp button to move to the previous or next file of the playlist O button Stops a track Fast Play Audio CD CD DA only During playback press the or o o button Each time you press the or amp button the playback speed will change Pause Pauses a track O button Plays the currently selected track Repeat an Audio CD CD DA MP3 1 During Playlist playback press the TOOLS button Playlist 1 To move to the Music List press the or RETURN button The Music List screen appears an Rip 1 2 Page SEJ Music TRACK 001 2 Press the 4b buttons to select Track All Shuffle or Off 3 Press the J button Songs are played in Off the order in which they were recorded The current song is CN Track repeated CD All All songs are repeated Shuffle plays songs in 3G Shuffle random order move to a desired track and then press the YELLOW C button A check appears on the track Repeat this procedure to select additional tracks 3 To remove a track from the list move to the track and then press the YELLOW C button again The check on the tr
15. 80 H 264 BP MP HP prs 1920x1080 File Extension Type Resolution jpg jpeg JPEG 15360x8640 jpe png PNG 15360x8640 AVCHD Advanced Video Codec High Definition Front Panel e This player can play back AVCHD format discs These discs are normally recorded and used in camcorders REMOTE CONTROL SENSOR e The AVCHD format is a high definition digital video camera format e The MPEG 4 AVC H 264 format compresses images with greater efficiency than the conventional image compressing format e Some AVCHD discs use the x v Color format This player can play back AVCHD discs that use the x v Color format e x v Color is a trademark of Sony Corporation e AVCHD and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co POWER BUTTON Ltd and Sony Corporation DISC TRAY USB HOST OPEN CLOSE BUTTON NOTE f di d h d diti Nor re cei RA cA fepending en tne recording condition You can perform software upgrades using the USB Host jack with a USB flash memory stick only Please open and pull out the USB cover before inserting USB device T x v Color offers a wider color range than normal DVD camcorder discs Rear Panel The following accessories are included with your Blu ray player DD Q COAXIAL Batteries for Remote i l Control AAA Size User Manua Remote Control HDMIOUT LAN DIGITAL AUDIO OUT 4301 000115
16. BD J5900 the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register ENGLISH CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER ALL SERVICING TO QUALIFIED PERSONNEL This symbol indicates that high voltage is present inside It is dangerous to make any kind of contact with any internal part of this product This symbol indicates that important literature concerning operation and maintenance has been included with this product The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation To ensure reliable operation of this apparatus and to protect it from overheating these slots and openings must never be blocked or covered Do not place this apparatus in a confined space such as a bookcase or built in cabinet unless proper ventilation is provided Do not place this apparatus near or over a radiator or heat register or where it is exposed to direct sunlight Do not place vessels vases etc containing water on this apparatus A water spill can cause a fire or electric shock e Do not expose this apparatus to rain or place it near water near a bathtub washbowl kitchen sink or pool etc if this apparatus accidentally gets wet unplug
17. LY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE IN CASE OF PROGRESSIVE SCAN PICTURE PROBLEMS IT IS RECOMMENDED THAT THE USER SWITCH HE CONNECTION TO THE STANDARD DEFINITION OUTPUT IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS PRODUCT PLEASE CONTACT OUR CUSTOMER SERVICE CENTER Copy Protection Because AACS Advanced Access Content System is approved as the content protection system for the Blu ray Disc format similar to use of CSS Content Scramble System for the DVD format certain restrictions are imposed on playback analog signal output etc of AACS protected contents The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and or changed by AACS after the production of this product Furthermore BD ROM Mark and BD are additionally used as content protection systems for the Blu ray Disc format which imposes certain restrictions including playback restrictions for BD ROM Mark and or BD protected contents To obtain additional information on AACS BD ROM Mark BD or this product please contact SAMSUNG customer care center e Many Blu ray Disc DVDs are encoded with copy protection Because of this you should only connect your Player directly to your TV not to a VCR Connecting to a VCR results in a distorted picture from copy protected Blu ray Disc DVDs e Under
18. MI device AV receiver TV is not compatible with compressed formats Dolby Digital DTS the audio signal outputs as PCM Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects Some Blu ray Discs do not have BONUSVIEW audio and Navigation Sound Effects f you play MPEG audio soundtracks the audio signal outputs as PCM regardless of your Digital Output selections PCM or Bitstream f your TV is not compatible with compressed multi channel formats Dolby Digital DTS the player may output PCM 2ch downmixed audio even though you selected Bitstream either Re encoded or Unprocessed in the setup menu fyour TV is not compatible with PCM sampling rates over 48kHz the product will output at 48kHz downsampled PCM audio even though you set PCM Downsampling to Off 14 PCM Downsampling Lets you choose to have 96KHz PCM signals downsampled to 48KHz before they are outputted to an amplifier Choose On if your amplifier or receiver is not compatible with a 96KHz signal Dynamic Range Control Lets you apply dynamic range control to Dolby Digital Dolby Digital Plus and Dolby TrueHD audio e Auto Automatically controls the dynamic range of Dolby TrueHD audio based on information in the Dolby TrueHD soundtrack Also turns dynamic range control on for Dolby Digital and Dolby Digital Plus Off Leaves the dynamic range uncompressed letting you hear the original sound On Turns dyn
19. PCM 2ch PCM 2ch the Movie Frame 24Fs mode output format that is suitable for your gon Movie Frame 24Fs TV or AV Receiver For more details pyp Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital D please refer to the Digital Output DTS PCM2ch PCM2ch DTS DTS Setting the Movie Frame 24Fs feature Selection table to the right to Auto allows you to adjust the Outputs only main players HDMI output to 24 frames per Decodes main feature audio stream second for improved picture quality Definition ea Auen de You can enjoy the Movie Frame 24Fs for Any stream together the audio bitstream feature only on a TV supporting this into PCM audio and You will not hear frame rate You can select Movie Frame only when the player is in the HDMI 1080p output resolution mode If Source Stream is 2ch Re encoded Dolby D Settings are not applied adds Navigation Sound Effects BONUSVIEW audio and Navigation Sound Effects 13 Blu ray Discs may include three audio streams Main Feature Audio The audio soundtrack of the main feature BONUSVIEW audio An additional soundtrack such as the director or actor s commentary Navigation Sound Effects When you choose a menu navigation selection a Navigation Sound Effect may sound Navigation Sound Effects are different on each Blu ray Disc amp NOTES Be sure to select the correct Digital Output or you will hear no sound or just loud noise If the HD
20. TAR 2014 Samsung Electronics Co Ltd All rights reserved
21. ack is cancelled 4 When done press the button The tracks you selected are displayed on the right side of the screen The player plays the first track 5 To change the play list press the button or RETURN button to return to the Music List Repeat Steps 2 3 and 4 6 To cancel the play list and return to the Home screen press the RETURN or EXIT button amp NOTES You can create a playlist with up to 99 tracks on Audio CDs CD DA Ifyou remove all the tracks from a play list and then press the button the player lists and plays all the tracks on the disc Ripping Lets you copy audio files from an Audio CD CD DA to a USB HDD device 1 Open the disc tray Place the audio CD DA disc on the tray and close the tray Insert a USB device into the USB jack on the front of the product 2 In Stop mode press the AY dP buttons to move to a desired rack and then press the YELLOW C button A check appears on he track Repeat this procedure to select additional tracks 3 To remove a track from the list move to the track and then press he YELLOW C button again The check on the track is cancelled 4 When done press the TOOLS button and then select Rip using he 4 buttons and then press he button The Rip pop up appears 5 Use the amp buttons to select the device to store the ripped files to and then press the button amp NOTE Do not disconnect the device while r
22. amic range control on for all three Dolby formats Quieter sounds are made louder and the volume of loud sounds is reduced Downmixing Mode Lets you select the multi channel downmix method that is compatible with your stereo system You can choose to have the player downmix to normal stereo or to surround compatible stereo Network Settings When you connect this player to a network you can use network based applications and functions such as BD LIVE see page 17 Netflix Pandora and YouTube see pages 24 26 You can also use the network connection to upgrade the player s software see page 19 Instructions for configuring the network connection start below Configuring Your Network Connection Before you begin contact your ISP to find out if your IP address is static or dynamic If itis dynamic and you have a wired or wireless network we recommend using the Automatic configuration procedures described below If you are connecting to a wired network connect the player to your router using a LAN cable before you start the configuration procedure If you are connecting to a wireless network disconnect any wired network connections before you begin To begin configuring your network connection follow the steps beginning in the next column Wired Network Q Wired Automatic 1 Inthe Home screen select Settings and then press the EJ button 2 Select Network and then press the button 3 Select N
23. arks of their respective owners lt Java POWERED e Open Source License Notice In the case of using open source software Open Source Licenses are available on the product menu e Blu ray Disc Blu ray and the logos are trademarks of the Blu ray Disc Association e DLNA the DLNA Logo and DLNA CERTIFIED are trademarks dl Pi service marks or certification marks of the Digital Living Network na Alliance CERTIFIED LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product as supplied and distributed by SAMSUNG and delivered new in the original carton to the original consumer purchaser is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of One 1 Year Parts and Labor 90 Days Parts and Labor for Commercial Use This limited warranty begins on the original date of purchase and is valid only on products purchased and used in the United States To receive warranty service the purchaser must contact SAMSUNG for problem determination and service procedures Warranty service can only be performed by a SAMSUNG authorized service center The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG s authorized service center Transportation of the product to and from the service center is the responsibility of the purchaser SAMSUNG will repair or replace this product at our option and at no charge as stip
24. ast 1GB of free space to accommodate the BD LIVE service You can check the available size in BD Data Management m When the factory default settings are restored all stored user BD data is deleted Repairs If you contact us to repair your player an administration fee may be charged if either 1 An engineer is called out to your home at your request and there is no defect in the product 2 You bring the unit to a repair center and there is no defect in the product We will provide you with the amount of the administration fee before we make a home visit or begin any work on your player We recommend you read this manual thoroughly search for a solution on line at www samsung com or contact Samsung Customer Care at 1 800 SAMSUNG 726 7864 before seeking to repair your player 27 Specifications Compliance and Compatibility Notice NOT ALL discs are compatible e Subject to the restrictions described below and those noted throughout this Manual Power Requirements AC110 120V 50 60Hz Power Consumption 10 8W Weight 2 2 Ibs General Dimensions 11 4 W X 8 7 D X 1 5 H inches Operating Temperature Range 41 F to 95 F Operating Humidity Range 10 to 75 ype A USB 2 0 USB DC output 5V 0 5A Max i 2D 1080p 1080i 720p 480p Vidi HDMI 3D 1080p 720p Audio PCM Bitstream Audio Output Digital Audio Output Coaxial Ethernet 100BASE TX Terminal Wireless LAN Built In Network WEP
25. certain features may be subject to delayed availability notall new and existing disc format versions are supported by this player new and existing disc formats may be revised changed updated improved and or supplemented some discs are produced in a manner that allows specific or limited operation or restricts features during playback some discs bearing the BD ROM BD RE R DVD VIDEO DVD RW R DVD RW R and CD RW R logos may still be non standardized discs some discs may not be played depending on their physical state or recording conditions problems and errors can occur during the creation of Blu ray Disc or DVD software and or the manufacture of discs this player operates differently than a standard DVD player or other AV equipment and or for reasons noted throughout this user manual and for other reason s discovered and posted by SAMSUNG customer care center you encounter disc compatibility or player operation problems please contact the SAMSUNG customer care center You may also contact the SAMSUNG customer care center for possible updates to this player For additional information on playback restrictions and disc compatibility refer to the ollowing sections of this users manual Precautions Before reading the user manual Disc ypes and Characteristics and Before Playing For Blu ray Disc Player progressive scan output CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FUL
26. close the tray 2 Use the db buttons to select the type of content you want to view or play VIDEOS PHOTOS or MUSIC and then press the button amp NOTE Even though the player will display folders for all content types it will only display files of the Content Type you selected in Step 2 For example if you selected music you will only be able to see music files You can change this selection by returning to the Home screen and repeating Step 2 3 A screen appears listing the contents of the disc Depending on how the contents are arranged you will see either folders individual files or both 4 If necessary use the AW lt gt buttons to select a folder and then press the button 5 Use the amp 4 buttons to select a file to view or play and then press the button 6 Press the RETURN button one or more times to exit a current screen exit a folder or to return to the Home screen Press the EXIT button to return directly to the Home Screen 7 Go to pages 22 24 for instructions that explain how to control playback of videos music and pictures on a disc Using DLNA PC Blu ray Disc Player Play back PC s files DLNA Connection 1 Connect the Blu ray Disc Player your PC and or your DLNA compatible device to the same wireless network 2 Follow the directions in the DLNA software Installation Instruction manual to set up devices and files for playing or viewing 3 Se
27. e You can check the available size in BD Data Management Check whether the BD LIVE Internet Connection menu is set to Allow Alll If all above fails contact the content provider or update the player to the latest firmware The screen is blank If the HDMI output is set to a resolution your TV cannot support for example 1080p you may not see a picture on your TV Press the amp button on the front panel for more than 5 seconds with no disc inside All settings will revert to the factory settings Al the factory default settings are restored all stored user BD data is eted Forgot password Press the amp button on the front panel for more than 5 seconds with no disc inside All settings including the password will revert to the factory settings Don t use this unless absolutely necessary When the factory default settings are restored all stored user BD data is deleted The picture is noisy or distorted Make sure that the disc is not dirty or scratched Clean the disc No HDMI output Check the connection between the TV and the HDMI jack of the player Check if your TV supports 480p 720p 1080i or 1080p HDMI input resolutions Abnormal HDMI output screen If random noise appears on the screen it means that TV does not support HDCP High bandwidth Digital Content Protection When using the BD LIVE service an error occurs amp NOTES The memory device must have at le
28. e and then press the 4 W button to select USB Press the E button 3 Use the AW 4 buttons to select PHOTOS VIDEOS or MUSIC on the Home screen and then press the button The Photos Videos amp Music screen appears listing the content of the device Depending on how the contents are arranged you will see either folders individual files or both amp NOTE Even though the player will display folders for all content types it will only display files of the Content Type you selected in Step 3 For example if you selected music you will only be able to see music files You can change this selection by returning to the Photos Videos amp Music screen and repeating Step 3 4 If necessary use the AW 4 gt buttons to select a folder and hen press the E button 5 Use the AW lt p buttons to select a file to view or play and then press the EJ button 6 Press the RETURN button to exit a older or the EXIT button to return o Home screen 7 Go to pages 22 24 for instructions that explain how to control playback of videos music and pictures on a USB device amp NOTE fyou insert a disc when playing a USB device the device mode changes to Disc automatically Playing a Disc with User Recorded Content You can play multimedia files you have recorded on Blu ray DVD or CD discs 1 Place a user recorded disc into the disc tray with the disc s label facing up and then
29. e function For the proper operation of BD Wise set the BD Wise menu of both the player and the TV to On Resolution Lets you set the output resolution of the HDMI video signal to Auto 1080p 1080i 720p or 480p The number indicates the number of lines of video per frame The i and p indicate interlaced and progressive scan respectively The more lines the higher the quality Resolution according to the output mode e Blu ray Disc E contents Digital Contents playback HDMI connected HDMI Mode Blu ray en Disc iorta contents Resolution of BD Wise Blu ray Disc 1080p Max Max Auto Resolution of Resolution of TV input TV input 1080p 60F Movie Frame 1080p 60F 1080p 60F off Movie Frame O80p 24F 1080p 24F Auto 24Fs p P 1080i 1080i 1080i 720p 720p 720p 480p 480p 480p DVD playback Output HDMI connected Setup HDMI Mode BD Wise 480i NG Max oe of TV 1080p 1080p 10801 10801 720p 720p 480p 480p amp NOTES HDMI Color Format Digital Output Selection If the TV you connected to the player a does not support Movie Frame or Lets you set the color space format j the resolution you selected the for HDMI output to match the Setup PCM an message If no pictures areshown Capabilities of the connected device after selecting Yes please wait for TV it to 15 seconds to return
30. elect whether to play a Blu ray Disc with 3D content in 3D Mode amp NOTES To stop a movie during 3D playback of some 3D discs press the amp button once The movie stops and the 3D mode option is de activated To change a 3D option selection when you are playing a 3D movie press the J button once The Blu ray menu appears Press the button again then select 3D Settings in the Blu ray menu Depending on the content and the position of the picture on your TV screen you may see vertical black bars on the left side right side or both sides TV Aspect Ratio Depending on the type of television you have you may want to adjust the screen size setting amp NOTES Depending on the disc type some aspect ratios may not be available f you select an aspect ratio and option which is different than the aspect ratio of your TV screen the picture might appear to be distorted BD Wise Samsung TVs only BD Wise is Samsung s latest inter connectivity feature When you connect a Samsung player and a Samsung TV with BD Wise to each other via HDMI and BD Wise is on in both the player and TV the player outputs video at the video resolution and frame rate of the Blu ray Disc DVD amp NOTES When BD Wise is on the Resolution setting automatically defaults to BD Wise and BD Wise appears in the Resolution menu aif the player is connected to a device that does not support BD Wise you cannot use the BD Wis
31. en connected to this product using the Anynet function will when you turn them on display a warning popup message saying no connection has been found Never the less the Anynet connection is properly established and available to use BD Data Management Enables you to manage the downloaded contents you accessed through a Blu ray disc that supports the BD LIVE service and stored on a flash drive You can check the device s information including the storage size delete the BD data or change the Flash memory device amp NOTES Inthe external memory mode disc playback may be stopped if you disconnect the USB device in the middle of playback Your player supports the FAT16 FAT32 and NTFS file systems We recommend you use USB devices that support the USB 2 0 protocol with 4 MB sec or faster read write speed The Resume Play function may not work after you format the storage device The total memory available to BD Data Management may differ depending on the conditions Language Settings You can select the language you prefer for the On Screen menu disc menu audio and subtitles amp NOTE The selected language will only appear if it is supported on the disc Security Settings When you access this function for the first time the PIN screen appears Enter the default PIN 0000 using the number buttons To change the PIN use the Change PIN function Each time you access the Securit
32. etwork Settings and then press the B button 4 Select Wired in the Network Settings screen and then press the button 5 Select the Connect button and then press the button The product detects the wired connection verifies the network connection and then connects to the network Q Wired Manual If you have a static IP address or the Automatic procedure does not work you ll need to set the Network Settings values manually Follow Steps 1 and 2 in Wired Automatic and then follow these steps 1 Select Network Status The player searches for a network and then displays the connection failed message 2 On the bottom of the screen select IP Settings and then press the amp button The IP Settings screen appears 3 Select the IP Setting field and then press the J button 4 Select Enter manually in the IP Setting field and then press the button 5 Select a parameter to enter IP Address for example and then press the EJ button Use the number keypad on your remote control to enter the numbers for the parameter Use the d buttons on the remote control to move from entry field to entry field within a parameter When done with one parameter press the EJ button 6 Press the a or button to move to another parameter and then enter the numbers for that parameter following the instructions in Step 5 7 Repeat Steps 5 and 6 until you have filled in all parameters NOTE You ca
33. evice Method 1 1 Turn the player on 2 Connect the USB device to the USB port on the front panel of the player The New Device Connected pop up appears 123 Photos Videos Music Move Enter D Return amp NOTE Ifthe pop up does not appear go to Method 2 3 Use the amp W buttons to select Photos Videos or Music and then press the EJ button The Photos Videos amp Music screen appears listing the content of the device Depending on how the contents are arranged you will see either folders individual files or both NOTE Even though the player will display folders for all content types it will only display files of the Content Type you selected in Step 3 For example if you selected music you will only be able to see music files You can change this selection by returning to the Photos Videos amp Music screen and going to Step 3 in Method 2 below lf necessary use the AW 4 gt buttons to select a folder and then press the amp button Select a file to view or play and then press the E button Press the RETURN button to exit a folder or the EXIT button to return to the Home screen Go to pages 22 24 for instructions that explain how to control playback of videos music and pictures on a USB device Method 2 1 Turn the player on 2 Connect the USB device to the USB port on the front panel of the player Select Change Devic
34. follow these steps 1 Visit www samsung com Select Owners amp Support gt Manual amp Downloads Then follow the directions on the screen Download the latest USB software upgrade zip archive to your computer Unzip the zip archive to your computer You should have a single RUF file with the same name as the zip file gt T Copy the RUF file to a USB flash drive Make sure there is no disc in the player and then insert the USB flash drive into the USB port of the player In the player s menu go to Settings gt Support gt Software Upgrade Select By USB amp NOTES No disc should be in the product when you upgrade the software using the USB Host jack When the software upgrade is done check the software details in the software Upgrade menu Do not turn off the player during the software upgrade It may cause the player to malfunction Software upgrades using the USB Host jack must be performed with a USB flash memory stick only Auto Upgrade Notification If you have connected the player to your network and then set Auto Upgrade Notification on the player automatically notifies you when a new software version is available for the player To set Auto Upgrade Notification on follow these steps 1 Select Auto Upgrade Notification and then press the E button 19 2 Use the AW buttons to select On and then press the button If there is
35. gs will revert to their factory settings amp NOTE When the factory default settings are restored all the user stored BD data is deleted General Settings 5 Time Zone Lets you specify the time zone that is applicable to your area Support Settings Software Upgrade The Software Upgrade menu allows you to upgrade the player s software for performance improvements or additional services By Online To upgrade By Online follow these steps 1 Remove any discs from the player In the players menu go to Settings gt Support gt Software Upgrade 3 Select By Online and then press the amp button The Connecting to Server message appears 4 A popup message will appear if an update is available gt 6 When the update is complete the amp NOTES If a download is available select Yes The download and upgrade process starts Important Never turn the player off or on manually during an upgrade player will restart automatically The upgrade is complete when the player turns off and then turns on again by itself Never turn the player off or back on manually during the update process Samsung Electronics takes no legal responsibility for any product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade No disc should be in the product when you upgrade the software By Online By USB To upgrade by USB
36. he Security screen enter your network s Security Code or Pass Phrase Enter numbers directly using the number buttons on your remote control Enter letters by selecting a letter with the a Y 4 buttons and then pressing the button 15 11 When finished select Done at the right of the screen and then press the B button The player verifies the network connection and then connects to the network 12 After the player verifies the network select OK and then press the button WPS PBC 1 Inthe Home screen select Settings and then press the EJ button 2 Select Network and then press the B button 3 Select Network Settings and then press the E button 4 Select Wireless in the Network Settings screen and then press the S button 5 Press the aY button on your remote and then press the d button to select WPS PBC 6 Press the button on your remote The Press the PBC button message appears 7 Press the WPS PBC button on your router within two minutes Your player automatically acquires all the network settings values it needs and connects to your network The Network Status screen appears The player connects to the network after the network connection is verified D 16 Q WPS PIN Before you begin open the router s setup menu on your PC and access the screen with the WPS PIN entry field 1 In the Home screen select Settings and then press the button 2 Select Network and t
37. he manufacturer s web site When you are using the Screen Mirroring function video stuttering or audio dropouts may occur depending on your environment Bluetooth transmissions can interfere with the Screen Mirroring signal Before using the Screen Q NOTES What is a valid certificate When the player uses BD LIVE to send the disc data and a request to the server to certify the disc the server uses the transmitted data to check if the disc is valid and sends the certificate back to the player The Internet connection may be restricted while you are using BD LIVE contents Using BD LIVE button The Screen Mirroring pop up appears Launch DLNA Cast on your device On your device find the name of the Blu ray player in the list of available devices and then select it The TV will display a PIN Enter he PIN into your device The TV displays a connecting message for example Connecting o Android_92gb and then displays the connected message na few moments the screen of your device appears on the TV screen To stop Screen Mirroring press he EXIT or RETURN button on he remote control or shut off he Screen Mirroring function on your smart phone Mirroring function we strongly recommend that you turn off the Bluetooth function on your smart phone or smart device tablet etc Device Name The Device Name function allows you to change the player s name by selecting from a device
38. he power cord s plug Never unplug by pulling on the power cord Do not touch the power cord with wet hands f this apparatus does not operate normally in particular if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service center Maintenance of Cabinet Before connecting other components to his product be sure to turn them off Ifyou move your product suddenly rom a cold place to a warm place condensation may occur on the operating parts and lens and cause abnormal disc playback if this occurs unplug the product wait for two hours and then connect the plug to the power outlet Then insert the disc and try to play back again Be sure to pull the power plug out of the outlet if the product is to remain unused or if you are leaving the house for an extended period of time especially when children elderly or disabled people will be left alone in the house Accumulated dust can cause an electric shock an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate Contact an authorized service center for information if you intend to install your product in a location with heavy dust high or low temperatures high humidity chemical substances or where it will operate 24 hours a day such as in an airport a train station etc Failing to do so may lead to serious damage to y
39. hen press the S button 3 Select Network Settings and then press the button 4 Select Wireless in the Network Settings screen and then press the S button The player searches for and then displays a list of the available networks 5 Select the desired network and then press the button 6 Select the WPS PIN and then press the button The PIN pop up appears 7 Enter the PIN into the WPS PIN entry field in the router s Set Up screen and then save the the screen amp NOTES Contact the manufacturer of the router for instructions explaining how to access the router s Set Up screens or refer to the router s user s manual For WPS connection set your wireless router s security encryption to AES WPS does not support WEP security encryption Network Test Use this menu item to check whether your network connection is working or not Network Status Use to check whether a connection to a network and the Internet has been established Wi Fi Direct The Wi Fi Direct function allows you to connect Wi Fi Direct devices to the player and each other using a peer to peer network without a wireless router NOTES Some Wi Fi Direct devices may not support the DLNA function if connected via Wi Fi Direct If this is the case we recommend that you change the network connection method you used to connect the devices Bluetooth transmissions can interfere with the Wi Fi Direct signal Before
40. il address and password 5 When done select Sign In at the bottom of the screen and then press the button 6 If you do not have a Pandora account follow the directions on the Pandora screen to create a Pandora account Using YouTube You can use your Blu ray player to stream video content from YouTube To stream content from YouTube you must connect your Blu ray player to your network See pages 9 10 Starting YouTube for the First Time 1 On the Home screen select YouTube and then press the button NOTE lf this is the first time you start any of the apps at the bottom of the screen Netflix Pandora or YouTube you will be asked to read and agree to the Terms of Service Agreement and the Samsung Service Privacy Policy You must agree to both to continue After you have agreed to both go to Step 2 2 On the YouTube screen use the AY buttons to select Popular on YouTube Search or Sign In amp Settings and then press the button Popular on YouTube displays the currently Popular on YouTube videos by category and lets you select a category Search lets you search for videos using key words or names 25 Sign In amp Settings lets you access your YouTube account and send videos from your tablet or smart phone to your TV Playing and Controlling Videos 1 To begin select either Popular on YouTube and then press the button 2 Use the lt P buttons to select a category you
41. in 2 minutes The Connecting pop up appears followed by the Connected pop up When it closes you should see the device listed on the Wi Fi Direct screen as connected Through the Player Using a PIN 1 Select the WI Fi Direct device you want to connect to this player and then press the J button The PBC PIN pop up appears Select PIN and then press the button The PIN pop up appears Note the PIN code in the pop up and then enter it into the appropriate field in the Wi Fi Direct device you want to connect The Connecting pop up appears followed by the Connected pop up When it closes you should see the device listed on the Wi Fi Direct screen as connected amp NOTES The current wired or wireless network connection will be disconnected when you use the Wi Fi Direct function Text files such as files with a TXT or DOC extension do not display when you are using the Wi Fi Direct function Screen Mirroring The Screen Mirroring function lets you view the screen of your smart phone or android tablet on the TV that you have connected to the Blu ray player 1 In the Home menu press the AW gt buttons to select Screen Mirroring and then press the amp NOTES You can connect tyour player to a device that supports DLNA Cast Note that connecting to such a device may not be fully supported depending on the manufacturer For further information on mobile connection support refer to t
42. ipping is in progress 6 Ifyou want to cancel ripping press the button and then select Yes Select No to continue ripping 7 When ripping is complete the Ripping is completed message appears Press the button to go back to the Playback screen NOTES This function may not be supported by some discs On the Ripping screen you can also choose Select All and Deselect All Use Select All to select all tracks This cancels your individual track selections Use Deselect All to deselect all selected tracks at once 23 Disc Copy to USB Lets you copy video photo music contents from a data disc to a USB HDD device 1 Open the disc tray Place the data disc on the tray and close the tray Insert a USB device into the USB jack on the front of the product The new device pop up appears 2 Press the amp button and then press the lt to select Blu ray DVD or CD 3 Use the amp W buttons to select Photos Videos or Music and then press the EJ button The Photos Videos amp Music screen appears listing the content of the device Depending on how the contents are arranged you will see either folders individual files or both amp NOTE Even though the player will display folders for all content types it will only display files of the Content Type you selected in Step 3 For example if you selected music you will only be able to see music files You can change this selection by ret
43. it and contact an authorized dealer immediately 2 his apparatus uses batteries In your community there might be environmental regulations that require you to dispose of hese batteries properly Please contact your local authorities for disposal or recycling information Do not overload wall outlets extension cords or adaptors beyond their capacity since this can result in fire or electric shock Route power supply cords so that they are not likely to be walked on or pinched by items placed on or against them Pay particular attention to cords at the plug end at wall outlets and the point where hey exit from the apparatus o protect this apparatus from a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the set due to lightning and power line surges Before connecting the AC power cord to the DC adaptor outlet make sure the voltage designation of the DC adaptor corresponds to the local electrical supply Never insert anything metallic into the open parts of this apparatus Doing so may create a danger of electric shock o avoid electric shock never touch the inside of this apparatus Only a qualified echnician should open this apparatus Make sure to plug the power cord in until it is firmly seated When unplugging he power cord from a wall outlet always pull on t
44. lect Change Device on the player s Home screen and then press the BJ button In the list of DLNA connected devices that appears select your PC or other DLNA compatible device and then press the E button 4 Use the 4 buttons to select the type of content you want to view or play VIDEOS PHOTOS or MUSIC and then press the button NOTE Even though the player will display folders for all content types it will only display files of the Content Type you selected in Step 4 For example if you selected music you will only be able to see music files You can change this selection by returning to the Home screen and repeating Step 4 21 A screen appears listing the contents of the PC or DLNA device Depending on how the contents are arranged you will see either folders individual files or both If necessary use the AV 4 gt buttons to select a folder and hen press the J button Use the aY 4 buttons to select a file to view or play and then press the J button Press the RETURN button one or more times to exit a current screen exit a folder or to return o the Home screen Press the EXIT button to return directly to he Home Screen Go to pages 22 24 for instructions that explain how to control playback of videos music and pictures on a disc 22 Controlling Video Playback You can control the playback of video content located on a Blu ray disc DVD CD USB device or your com
45. lect more letters or numbers 4 As you add more letters Netflix will start to display matches in the ield on the right 5 To move to the list of matches press he button one or more times 6 To select a movie or video highlight it and then press the button amp NOTE Select the Delete button with an X at the top of the screen to delete the last character you entered Using Pandora You can use your Blu ray player to stream music from Pandora free of charge To stream music from Pandora you must connect your Blu ray player to your network See pages 9 10 Starting Pandora for the First Time 1 On the Home screen select Pandora and then press the button amp NOTE lf this is the first time you start any of the apps at the bottom of the screen etflix Pandora or YouTube you will be asked to read and agree to the Terms of Service Agreement and the Samsung Service Privacy Policy You must agree to both to continue After you have agreed to both go to Step 2 2 On the Pandora welcome screen if you have a Pandora account select I have a Pandora account and then press the GJ button Go to Step 3 If you do not have a Pandora Account select am new to Pandora and then press the button Go to Step 6 3 Enter your e mail address and password Use the AY 4p buttons to select a character and then press the J button 4 Repeat Step 3 to enter all the characters in your e ma
46. n get the Network parameters from your Internet provider 8 When finished entering all the parameters press the RETURN or EXIT button The player verifies the network connection and then connects to the network Wireless Network You can setup a wireless network connection in four ways Wireless Automatic Wireless Manual WPS PBC WPS PIN When you configure the wireless network connection any wireless network devices currently connected through the player or if applicable the player s current wired connection will be disconnected Q Wireless Automatic 1 In the Home screen select Settings and then press the button 2 Select Network and then press the S button 3 Select Network Settings and then press the button 4 Select Wireless in the Network Settings screen and then press the button The player searches for and then displays a list of the available networks 3 Networ cS 5 Select the desired network and hen press the button 6 On the Security screen enter your network s Security Code or Pass Phrase Enter numbers directly using the number buttons on your remote control Enter letters by selecting a letter with an arrow button and hen pressing button 7 When finished select Done and then press the J button The player verifies the network connection and hen connects to the network 8 When verification is complete select OK and then press
47. name list BD Live Internet Connection Set to allow or prohibit an Internet connection when you use the BD LIVE service Allow All The Internet connection is allowed for all BD LIVE contents Allow Valid Only The Internet connection is allowed only for BD LIVE contents containing a valid certificate allowed for any BD LIVE content Prohibit No Internet connection is Once the player is connected to the network you can enjoy various movie related service content using a BD LIVE compliant disc 1 Attach a USB memory stick to he USB jack on the front of he player and then check its remaining memory The memory device must have at least 1GB of ree space to accommodate the BD LIVE services 2 Insert a Blu ray Disc that supports BD LIVE 3 Select an item from various BD LIVE service contents provided by he disc manufacturer NOTE The way you use BD LIVE and the provided contents may differ depending on the disc manufacturer 17 The DLNA Function DLNA lets you play music video and photo files stored in your PC through your Blu ray player To use DLNA you must install DLNA software or already have DLNA software installed on your PC and connect the Blu ray player to your PC via your network see pages 14 15 amp NOTE PCs running Windows 7 and Windows 8 have DLNA software Play To built in For instructions explaining how to play content located on your PC
48. nated or interrupted at any time and Samsung makes no representation or warranty that any content or service will remain available for any period of time Content and services are transmitted by third parties by means of networks and transmission facilities over which Samsung has no control Without limiting the generality of this disclaimer Samsung expressly disclaims any responsibility or liability for any interruption or suspension of any content or service made available through this device Samsung is neither responsible nor liable for customer service related to the content and services Any question or request for service relating to the content or services should be made directly to the respective content and service providers License e Manufactured under license from Dolby Laboratories Dolby and the DOLBY double D symbol are trademarks of Dolby Laboratories TRUEHD e For DTS patents see http patents dts com Manufactured under license from DTS Licensing Limited DTS the Symbol amp DTS and the Symbol 2 0 Digital Out together are registered trademarks and DTS 2 0 Digital Out is a trademark of DTS Inc DTS Inc All Rights Reserved e The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Homi e Oracle and Java are registered trademarks of Oracle and or its affiliates Other names may be tradem
49. nusview function Press to see the full screen on a TV During Blu ray Disc DVD playback the Full Screen button does not operate Allows you to play selected portions of a Allows you to repeat a title chapter disc repeatedly track or disc amp NOTES SSS If you use an HDMI to DVI cable to connect to your display device you must also connect the Digital Audio Out on the player to an audio system to hear audio Installing batteries N en An HDMI cable outputs digital video and audio so you don t need to connect an audio cable een pei e remote sensor ls rocked by Depending on your TV certain HDMI output resolutions may not work Please refer u s e Check if there is any fluorescent lighting to the user manual of your TV nearby When you connect the player to your TV using an HDMI cable or to a new TV and 1 CAUTION then turn it on for the first time the player automatically sets the HDMI output a Sa Diboe of batenesadii ding to local resolution to the highest supported by the TV environmental regulations Do not put them N cable may cause screen noise If this occurs set HDMI Deep Color to A Fi in the household trash in the menu Q nen a Do not dispose of batteries in a fire To view video in the HDMI 720p 1080i or 1080p output mode you must use a amp NOTES Do not short circuit disassemble or high speed HDMI cable i overheat the batteries HDMI outputs only a pure digital signal to the TV if the remo
50. oblems e Inserting more than one memory device into a multi card reader may cause the reader to operate improperly e The player does not support the PTP protocol e Do not disconnect a USB device while it is transferring playing or recording files 5 e The bigger the image resolution the longer the image takes to display e This player cannot play MP3 files with DRM Digital Rights Management downloaded from commercial sites e Your player only supports video with a frame rate under 30fps frames per second e Your player only supports USB Mass Storage Class MSC devices such as thumb drives and USB HDD HUB is not supported e Certain USB HDD Devices multi card readers and thumb drives may not be compatible with this player If some USB devices require excessive power they may be limited by the circuit safety device e if playback from a USB HDD is unstable provide additional power by plugging the HDD into a wall socket If the problem continues contact the USB HDD manufacturer e SAMSUNG is not responsible for any data file damage or data loss e Your player does not support NTFS compressed files sparse files or encrypted files e You can repair or format a USB device on your Desktop PC MS Windows OS only Supported Video File Formats e Limitations Even when a file is encoded by a supported codec listed above the file might not be played if its content has a problem Normal playback i
51. on the rear panel of the player Region Code Disc Type Area North America Central America South America Korea Japan Taiwan Hong Kong and South East Asia Europe Greenland French territories Middle East Africa Australia and New Zealand Blu ray Disc India China Russia Central and South Asia N The U S U S territories and Canada Europe Japan the Middle East Egypt South Africa Greenland Taiwan Korea the Philippines Indonesia Hong Kong DVD Mexico South America Central America H Australia New Zealand Pacific Islands Caribbean VIDEO Russia Easter Europe india most of Africa North Korea Mongolia China Logos of Discs the player can play ae un Ehre Blu ray Disc BD LIVE Blu ra 33 NTSC NTSC broadcast 3D Blu ray Disc system in U S A Canada Korea Japan Supported File Formats Notes on the USB connection e Your player supports USB storage media MP3 players digital cameras and USB card readers e The player does not support folder or file names longer than 128 characters e Some USB External HDD digital camera devices may not be compatible with the player e Your player supports the FAT16 FAT32 and NTFS file systems e Connect USB devices directly to the players USB port Connecting through a USB cable may cause compatibility pr
52. ou have connected a LAN cable to the Blu ray player Initial Setup defaults to Wired Network Go to the Wired Network section below If you have not connected a LAN cable Initial Setup defaults to Wireless Network Go to the Wireless Network section in the second column amp NOTE Wired Network 1 fyou have no network select Skip by pressing the BLUE D button and then go to Step 6 The Setup Complete window appears and remains on the screen for a few moments Then the Home screen appears The Blu ray player automatically verifies your wired network FE OOO z Select your network type ee Skip lt gt Move Select After the player verifies the network press the J button Go to Step 6 of The Setup Procedure above Wireless Network 1 The Blu ray player automatically searches for and then lists all wireless networks that are within range Setup Netware OOO Select your network type Select a network and then press the button The keyboard appears Security Key Bios Move Select If your network has a password use the keyboard to enter it Press the number buttons on your remote to enter numbers Use the keyboard to enter letters When finished use the AY 4p buttons to select Done and then press the button If you have no password go to Step 4 After the player verifies the network press the E9 button
53. our product Use only a properly grounded plug and wall outlet An improper ground may cause electric shock or equipment damage Class Equipment only o turn this apparatus off completely you must disconnect it from the wall outlet Consequently the wall outlet and power plug must be readily accessible at all times Do not allow children to hang on the product Store the accessories battery etc in a location safely out of the reach o children Do not install the product in an unstable location such as a shaky self a slanted loor or a location exposed to vibration Do not drop or strike the product if the product is damaged disconnect the power cord and contact a service center fo clean this apparatus unplug the power cord from the wall outlet and wipe the product using a soft dry cloth Do no use any chemicals such as wax benzene alcohol thinners insecticide air fresheners lubricants or detergent These chemicals can damage the appearance of the product or erase the printing on the product e Do not expose this apparatus to dripping or splashing Do not put objects filled with liquids such as vases on the apparatus e Do not dispose of batteries in a fire e Do not plug multiple electric devices into the same wall socket Overloading a socket can cause it to overheat resulting ina fire e There is danger of an explosion if you replace the batteries used in the remote with the wrong
54. puter Depending on the media some of the functions described in this manual may not be available During Blu ray or DVD disc playback the Full screen button does not operate Buttons on the Remote Control used for Video Playback FE Jle l EB Playback related buttons The player does not play sound in Search Slow or Step mode e To return to normal speed playback press the E button O button Starts playback D button Stops playback 0 button Pauses playback During playback press the x or G button Ka Motion Each time you press the 89 or amp button the playback speed will change In pause mode press the O button Each time aay Motion you press the Q button the playback speed will change In pause mode press the N D button Hey Motion Each time you press the O button a new frame appears During playback press the amp or G button Skip Motion Each time you press the Play amp or amp button the disc moves to the previous or next chapter or file B Using the disc menu title menu popup menu and title list During playback press en this button to display the Disc menu During playback press hee this button to display the Title menu During playback press POPUP MENU q Baker this button to display the Pop up menu Controlling Music Playback You can control the playback of music located on a Blu ray disc DVD CD USB device or
55. r or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as when the power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 3 Using the 3D function IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES Read and understand the following safety information before using the 3D function e Some viewers may experience discomfort while viewing 3D TV such as dizziness nausea and headaches If you experience any such symptom stop viewing 3D TV remove the 3D Active Glasses and rest e Watching 3D images for an extended period of time may cause eye strain If you feel eye strain stop viewing 3D TV remove your 3D Active Glasses and rest e A responsible adult should frequently check on children who are using the 3D unction f there are any reports of tired eyes headaches dizziness or nausea have the child stop viewing 3D TV and rest Do not use the 3D Active Glasses or other purposes Such as general eyeglasses sunglasses protective goggles etc e
56. r other intellectual property laws Such content and services are provided solely for your personal noncommercial use You may not use any content or services in a manner that has not been authorized by the content owner or service provider Without limiting the foregoing unless expressly authorized by the applicable content owner or service provider you may not modify copy republish upload post transmit translate sell create derivative works exploit or distribute in any manner or medium any content or services displayed through this device THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS SAMSUNG DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED EITHER EXPRESSLY OR IMPLIEDLY FOR ANY PURPOSE SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SAMSUNG DOES NOT GUARANTEE THE ACCURACY VALIDITY TIMELINESS LEGALITY OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE SHALL SAMSUNG BE LIABLE WHETHER IN CONTRACT OR TORT FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES ATTORNEY FEES EXPENSES OR ANY OTHER DAMAGES ARISING OUT OF OR IN CONNECTION WITH ANY INFORMATION CONTAINED IN OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Third party services may be termi
57. ress the TOOLS button Start Slide Show Select to start or stop Stop Slide Show the slide show Slide Show Select to set a slide Speed show s speed Select to listen to music Ba Kanne while viewing a slide show Select to enlarge Zoom the current picture Enlarge up to 4 times Select to rotate the picture This will rotate Rotate the picture either clockwise or counter clockwise Shows the picture Information information amp NOTES Depending on the disc or storage device the Tools menu may differ To enable the background music function the photo file must be in the same storage media as the music file However the sound quality can be affected by the bit rate of the MP3 file the size of the photos and the encoding method You can t enlarge the subtitle and PG graphic in the full screen mode Using Netflix You can use your Blu ray player to stream movies TV shows and other video content from Netflix To stream content from Netflix you must connect your Blu ray player to your network See pages 9 10 Starting Netflix for the First Time 1 On the Home screen select Netflix and then press the J button amp NOTE If this is the first time you start any of the apps at the bottom of the screen Netflix Pandora or YouTube you will be asked to read and agree to the Terms of Service Agreement and the Samsung Service Privacy Policy You must agree
58. s and the video you selected plays 5 lf you do not find a video you want press the Return or amp button to return to previous screens Using Search 1 On the YouTube Home screen select Search and then press the button 2 On the Search screen use the 4P buttons to select a character and then press the EJ button The character you selected appears in the field at the top 3 Repeat Step 2 to select more letters or numbers 4 As you add more characters YouTube will start to display matches in the field on the right This may take some time 5 To move to the list of matches press the button one or more times 6 To select a video use the AW db buttons to highlight it and then press the button YouTube plays the video amp NOTES Select Clear at the top of the screen to clear all entered characters Select the Delete button with an at the top of the screen to delete the last character you entered Sign In amp Settings Sign In amp Settings lets you access your YouTube account and send videos from your tablet or smart phone to your TV Using Sign In amp Settings To use Sign In amp Settings follow these steps 1 On the YouTube Home page select Sign In amp Settings and then press the B button 2 On the Sign In amp Settings page use the lt P buttons to select either Sign In or Pair and then press the button 3 Follow the directions on the screen
59. s not guaranteed if the file s container information is wrong or the file itself is corrupted Files having a higher Bit rate frame rate than standard may stutter during sound video playback The Seek skip function is not available if the file s index table is damaged e Video decoder Supports up to H 264 Level 4 1 and AVCHD Does not support H 264 FMO ASO RS and VC1 SP MP AP L4 MPEG4 SP ASP Below 1280 x 720 60 frames max Above 1280 x 720 30 frames max Does not support GMC 2 or higher e Audio decoder Supports WMA 7 8 9 and STD Does not support WMA sampling rate of 22050Hz mono AAC Max sampling rate 96Khz 8 11 12 16 22 24 32 44 1 48 64 88 2 96 Max bitrate 320kbps Supported Music File Formats File 6 Audio Extension Container Codec Support Range mp3 MP3 MP3 Sampling rates in kHz 8 11 16 22 32 wma WMA WMA 44 1 48 Bit rates All bit rates from Skbps to 355kbps Supported Picture File Formats File A a 3 Evenson Container Video Codec Audio Codec Resolution MP3 MP4v3 Dolby Digital 1920x1080 avi AVI DTS H 264 BP MP HP WMA 1920x1080 PCM VC 1 AP MP3 1920x1080 mkv MKV Dolby Digital H 264 BP MP HP DTS 4920x1080 VC 1 AP 1920x1080 wmv WMV wmv9 WMA _ VC 1 SM 1920x1080 MP4 mp4v 1920x1080 mp4 MP4 AAC nn H 264 BP MP HP 1920x1080 nr MPEGI MP1 2 1920x1080 Bi MPEG MPEG2 Dolby Digital 1920x10
60. see pages 21 24 System Settings Setup By using the Setup function you can set the language Network Settings etc For more information about the Setup function refer to the Setup section of this user manual See pages 10 11 Quick Start When set to On Quick Start lets the player start up more quickly by decreasing the boot time NOTE If this function is set to On Standby power consumption will be increased 18 Anynet HDMI CEC Anynet is a convenient function that offers linked operations with other Samsung products that have the Anynet feature To operate this function connect this player to an Anynet Samsung TV with an HDMI cable With Anynet on you can operate his player using a Samsung TV remote control and start disc playback simply by pressing the PLAY EBD button on he TV s remote control For more information please see the TV user manual amp NOTES This function is not available if the HDMI cable does not support CEC If your Samsung TV has an Anynet logo then it supports the Anynet function Depending on your TV certain HDMi output resolutions may not work Please refer to the user manual of your TV If you have Anynet turned on when you turn off the product or disconnect and then reconnect the power cable the product turns on automatically to re establish the Anynet connection After about 15 seconds it turns off again automatically Some Samsung TVs wh
61. sult in service problems incorrect electrical line voltage fluctuations and surges customer adjustments and failure to follow operating instructions cleaning maintenance and environmental instructions that are covered and prescribed in the instruction book product removal or reinstallation reception problems and distortion related to noise echo interference or other signal transmission and delivery problems SAMSUNG does not warrant uninterrupted or error free operation of the product THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS OR ANY OTHER SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE MISUSE OR INABILITY TO USE THIS PRODUCT REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE WITHOUT LIMITING THE FOREGOING PURCHASER
62. te does not operate properly Danger of explosion if batteries are If your TV does not support HDCP High bandwidth Digital Content Protection Check the polarity of the batteries incorrectly replaced Replace only with the random noise appears on the screen e Check if the batteries are drained same or equivalent type pp f Connecting to an Audio System Connecting to a Network Router You can connect the Blu ray player to an audio system using one of the You can connect your player to your network router using one ofthe methods methods illustrated below illustrated below Do not connect the power cord to the wall outlet until you have made all To use DLNA network functionality you must connect your PC to your network the other connections as shown in the illustrations When you change the connections turn off all devices before you start The connection can be wired or wireless Mema Connecting to an HDMI compatible AV receiver Wired Network e Connect an HDMI cable not supplied from the HDMI OUT jack on the back of the product to the HDMI IN jack on your receiver e Best quality Recommended Med Connecting to an AV receiver with a Digital Coaxial Cable En with integrated router e Using a digital Coaxial cable not supplied connect the Coaxial Digital I Broadband Audio Out jack on the product to the Digital Coaxial In jack of the receiver gt service e Good quality e You will hear sound only through the
63. the button amp NOTE You should be able to find the Security Code or Pass Phrase on one of the set up screens you used o set up your router or modem Q Wireless Manual If you have a static IP address or the Automatic procedure does not work you ll need to set the Network Settings values manually 1 Follow the directions in Wireless Automatic through Step 5 2 The player tries to connect to the network and then displays the connection failed message 3 On the bottom of the screen select IP Settings and then press the B button The IP Settings screen appears 4 Select the IP Setting field and then press the BJ button 5 Select Enter manually in the IP Setting field and then press the button 6 Select a parameter to enter IP Address for example and then press amp button Use the number keypad on your remote control to enter the numbers for the parameter Use the 4 buttons on the remote control to move from entry field to entry field within a parameter When done with one parameter press the E button 7 Press the 4 or Y button to move to another parameter and then enter the numbers for that parameter following the instructions in Step 6 8 Repeat Steps 6 and 7 until you have filled in all parameters amp NOTE You can get the Network parameters from your Internet provider 9 When finished press the RETURN or EXIT button The Security Screen appears 10 On t
64. the U S Copyright laws and Copyright laws of other countries unauthorized recording use display distribution or revision of television programs videotapes Blu ray Discs DVDs and other materials may subject you to civil and or criminal liability e Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commercially produced film and videos and their soundtracks When a prohibited use of an unauthorized copy is detected a message will be displayed and playback or copying will be interrupted More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http www cinavia com To request additional information about Cinavia by mail send a postcard with your mailing address to Cinavia Consumer Information Center P O Box 86851 San Diego CA 92138 USA This product incorporates proprietary technology under licence from Verance Corporation and is protected by U S Patent 7 369 677 and other U S and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology Cinavia is a trademark of Verance Corporation Copyright 2004 2013 Verance Corporation All rights reserved by Verance Reverse engineering or disassembly is prohibited Network Service Disclaimer All content and services accessible through this device belong to third parties and are protected by copyright patent trademark and o
65. tions Menu PROBLEM SOLUTION If you experience other Go to the table of contents and find the section of the user problems manual that contains information about the feature you are having the problem with and then follow the procedure again e If you still cannot resolve the problem please contact Samsung Customer Support at the phone number listed on the last page of this manual DLNA function I can see folders shared through e DLNA only shows Video Photo and Music files Other types of DLNA but I cannot see the files files are not displayed Video is played intermittently Check if the network is stable Check if the network cable is properly connected and if the network is overloaded The wireless connection between the DLNA compatible device and the player is unstable Check the connection The DLNA connection between the Player and PC is unstable IP addresses within the same subnetwork should be unique If they are not IP interference can cause this phenomenon Check if you have a firewall enabled If so disable the firewall function BD LIVE I cannot connect to the BD LIVE server Check whether the network connection is working or not by accessing Network Status in Network Settings Settings gt Network Settings gt Network Status Check whether the USB memory device is connected to the player The memory device must have at least 1GB of free space to accommodate the BD LIVE servic
66. to both to continue After you have agreed to both go to Step 2 2 Ifyou already have a Netflix account select Sign In press the amp J button and then go to Step 6 If not go to Step 3 3 Enter your e mail address by selecting character number or symbol keys on the screen using the AY lt P buttons and then pressing the BJ button 4 When done move the cursor to Next at the bottom of the screen and then press the J button 5 Repeat the same process for the Password field 6 After you have entered your password select Next at the bottom of the screen and then press the 9 button amp NOTES To return to the previous page press the Return button on your remote To exit Netflix press the Exit button on your remote Selecting a Movie or Video Movies and videos on Netflix are displayed in rows by category To scroll through a row use the lt gt buttons To move up or down from one row to another use the AW buttons To select a movie or video highlight it and then press the button You can also search for movies and videos by keywords title director s name actors name etc To search follow these steps 1 Select the Search field at the top of the movie video list screen and then press the J button 2 Using the AWdb buttons select a letter or number and then press he button The character you selected appears at the top of the ield on the right 3 Repeat Step 2 to se
67. to the previous MONItOT Etc Connection HDMI coaxial HDMI Coaxial resolution appears If you select Receiver Receiver Yes the TV s screen will go blank for HDMI Deep Color 15 seconds and then the resolution PCM h PCM2ch PCM PCM2ch will revert to the previous resolution Lets you output video from the Ad automatically HDMI OUT jack with Deep Color Dolby pem 2ch pcm ach Dolby Dolby If the screen stays blank after you Deep Color provides more accurate Digital Digital Digital have changed the resolution remove color reproduction with greater color Dolby pem 2ch pem zen Dolby Dolby all discs and then press and hold the depth Digital Plus Digital Plus Digital button on the front of the player Audio Dolby Dolby Dolby for more than 5 seconds All settings Progressive Mode Stream on TrueHD PCM 2ch PCM 2ch ET iipiagea are restored to the factory default Blu ray Access the Resolution function and Lets you improve picture quality when Disc DTS PCM 2ch PCM 2ch DTS DTS reset the output resolution to a iewi resolution tha is compatible with viewing DyDs DTS HD High DTS HD High your TV a PCM 2ch PCM 2ch in p H Audio When the factory default settings Sound Settings are restored all stored user BD data Ea A beer Ree i ee aster is deleted Digital Output Audio Rs The Blu ray Disc must have the 24 frame feature for the player to use Lets you select the digital audio PCM PCM ach PCM 2ch
68. ulated herein with new or reconditioned parts or products if found to be defective during the limited warranty period specified above All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG Replacement parts and products assume the remaining original warranty or ninety 90 days whichever is longer SAMSUNG s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement Non SAMSUNG hardware and software products if provided are on an AS IS basis Non SAMSUNG manufacturers suppliers publishers and service providers may provide their own warranties This limited warranty covers manufacturing defects in materials and workmanship encountered in normal and except to the extent otherwise expressly provided for in this statement noncommercial use of this product and shall not apply to the following including but not limited to damage which occurs in shipment delivery and installation applications and uses for which this product was not intended altered product or serial numbers cosmetic damage or exterior finish accidents abuse neglect fire water lightning or other acts of nature use of products equipment systems utilities services parts supplies accessories applications installations repairs external wiring or connectors not supplied and authorized by SAMSUNG or which damage this product or re
69. urning to the Photos Videos amp Music screen and repeating Step 3 4 In Stop mode use the AY db buttons to select a file you want to copy and then press the YELLOW C button A check appears to the left of the file 24 5 Repeat Step 4 to select and check additional files 6 To remove a file from the list move to the file and then press the YELLOW C button again The check on the file is removed 7 When done press the TOOLS button Select Copy to USB using the aY buttons and then press the J button The Copy to USB pop up appears 8 Use the AY buttons to select the device to store the copied files on and then press the J button amp NOTE Do not disconnect the device while copying is in progress 9 If you want to cancel copying press the EJ button and then select Yes Select No to continue copying 10 When copying is complete the Copying is completed message appears Press the E button to go back to the Playback screen amp NOTES This function may not be supported by some discs On the Copying screen you can also choose Select All and Deselect All Use Select All to select all item This cancels your individual item selections Use Deselect All to deselect all selected item at once Playing Photo Contents You can control the playback of photo content located on a Blu ray disc DVD CD USB device or your computer Using the Tools Menu During playback p
70. vices etc Settings The Home screen will not appear if you do not configure the Setup The OSD On Screen Display may change in this player after you upgrade the software version The access steps may differ depending on the menu you selected After the Setup process is complete you can then operate the panel buttons and remote control After you have connected the player o your TV turn on the TV and player When you turn on the player he first time the player s Setup screen appears on the TV The Setup procedure lets you set the On Screen Display OSD and menu languages he aspect ratio screen size the network type and connect the player o your network To run the Setup procedure follow hese steps 1 Plug in the Blu ray player turn on your TV and then turn on the Blu Select a language for the on screen displays Me or 2 Select the desired language and then press the button The Start screen appears Press the button The TV Aspect screen appears On the TV Aspect screen select the desired TV Aspect Ratio and then press the J button The Network screen appears ray player by pressing the POWER amp NOTE button on the remote The Setup Language screen appears An explanation of each Aspect Ratio appears on the screen Highlight each choice to see each explanation If you have an HDTV we suggest you choose 16 9 original If y
71. want and then press the EJ button YouTube automatically starts the first video in that category 3 After the video starts press the button The Control Panel appears On the Control Panel you can Pause Rewind Fast Forward and perform other operations on the running video by using the db buttons on your remote to select the appropriate button on the Control Panel and then pressing the button on the remote 26 Finding and Selecting Other Videos Related Videos 1 With a video running and the Control Panel displayed press the button once The Information screen appears 2 In the Information screen press he W button once The Related Videos category appears displaying individual related videos 3 Use the lt P buttons to select a video and then press the button The first video stops and he video you selected plays 4 Ifyou do not find a video you want press the Return or amp button to return to previous screens Current Play List Videos 1 With a video running and the Control Panel displayed press the button once The Information screen appears 2 In the Information screen press the Y button once The Related Videos category appears displaying individual related videos 3 Press the Y button again The Current Play List appears displaying individual videos in the Current Play List 4 Use the dP buttons to select a video and then press the button The first video stop
72. y Disc DVDs does not correspond to the Region number of this player the player cannot play the disc Precautions Important Safety Instructions Read these operating instructions carefully before using the unit Follow all the safety instructions listed below Keep these operating instructions handy for future reference 1 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth supwn Use only with the Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including AV receivers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where it exits the apparatus Only use attachments accessories specified by the manufacturer cart stand tripod bracket or table specified by the manufacture
73. y Settings hereafter you must enter that four digit PIN If you don t change the PIN continue using the default PIN BD Parental Rating Prevents playback of Blu ray Discs with specific age ratings unless the 4 digit PIN is entered DVD Parental Rating This function works in conjunction with DVDs that have been assigned an age rating or numeric rating that indicates the maturity level of the content These numbers help you control the types of DVDs that your family can watch Select the rating level you want to set For example if you select Level 6 discs rated above 6 Level 7 and 8 will not play A larger number indicates more mature content When the DVD Parental Rating function is on you must enter the 4 digit PIN to play discs with restricted rating levels Change PIN Change the 4 digit password used to access security functions To change the PIN follow these steps 1 Select Change PIN and then press the amp button The Enter old PIN screen appears Enter the old PIN If you never changed the PIN enter the default PIN 0000 The Enter new PIN screen appears Enter the new PIN in the Enter new PIN field Re enter the new PIN in the Confirm new PIN field The PIN is changed successfully message appears 5 Press the button If you forget your password 1 2 Remove any discs Press and hold the amp button on the front panel for 5 seconds or more All settin
74. you use the Wi Fi Direct function we strongly recommend that you turn off the Bluetooth function of any active mobile device 1 Turn on the Wi Fi direct device and activate its WI Fi Direct function 2 Inthe Home screen select Settings and then press the button 3 Select Network and then press he button 4 Select Wi Fi Direct and then press he B button The Wi Fi Direct devices that you can connect to the player appear 5 You have three ways to complete he Wi Fi connection e Through the Wi Fi device e Through the player using PBC e Through the player using a PIN Each is covered below Through the Wi Fi Device 1 Onthe Wi Fi device follow the procedure on the device for connecting to another Wi Fi Direct device See the device s user manual for instructions 2 When you have completed the procedure you should see a pop up on your TV screen saying that a device that supports Wi Fi Direct has requested to connect Select OK and then press the button to accept 3 The Connecting pop up appears followed by the Connected pop up When it closes you should see the device listed on the Wi Fi Direct screen as connected Through the Player Using PBC 1 Select the Wi Fi Direct device you want to connect to this player and then press the button The PBC PIN pop up appears Select PBC and then press the button The PBC pop up appears Press the PBC button on the Wi Fi Direct device with

Samsung BD-J5900

Contents

Download Pdf Manuals

Related Search

Related Contents