Bosch WAK24260GB washing machine
Contents
1. Register your new Bosch now www bosch home com welcome Washer WAK24260GB en Instruction Manual and Installation Instructions Your new washing machine You have selected a washing machine from Bosch Please take a couple of minutes to read and become familiar with the advantages of your washing machine To meet the high quality demands of the Bosch brand each washing machine that leaves our factory is inspected thoroughly to ensure that it functions properly and is in perfect condition Additional information about our products accessories spare parts and services can be found at www bosch home com or contact our customer service centers lf the instructions for use and assembly describe various models reference is made to the differences at the appropriate places L Do not start up the washing machine until you have read these instructions for use and the installation instructions Explanation of symbols A Warning This combination of symbol and signal word indicates a possibly dangerous situation Not heeding the warning can cause death or injuries Caution This signal word indicates a possibly dangerous situation Not heeding the caution can cause property and or environmental damage Note Tip Instructions on how to best use the appliance as well as other useful information 1 2 3 a b Action steps are indicated using numbers or letters a2. 30 Positioning and connecting 31 Included with the appliance 31 Safety instructions 31 Installation Surface 0 GA Installation on a base or a wooden joist ee E ses eee Boe on ene 32 Installing the appliance ina an Removing the transport locks 32 Hose and cable lengths 33 Water inlet 000 oO Water outlet 0008 34 Levelling 0c cee ee eee 35 Electrical connection 35 Before washing for the first time 36 Transportation 0005 36 Intended use For private domestic use only m he washing machine is suitable for washing machine washable fabrics and hand washable wool in detergent solution m o be operated with cold mains water and standard detergents and care products which are suitable for use in washing machines m When measuring the amount of all detergents additives care products and cleaning agents always check the manufacturer s instructions m he washing machine may be used by children over the age of 8 years old and by persons with reduced physical sensory or mental capacity or by persons with a lack of experience or knowledge if they are supervised or have been instructed by a responsible person Children must not perform cleaning or maintenance work unsupervised m Keep pets away from the washing machine Read the Instruction Manual and Installation Instructions and all other information
3. Machine housing control panel m Wipe the housing and the control panel with a soft damp cloth m Remove the detergent residue immediately Do not clean with a water jet Drum Use chlorine free cleaning agents and not steel wool Descaling Descaling should not be necessary if the detergent is measured out correctly However if it is required follow the manufacturer s instructions for the Cleaning and maintenance en descaling agent Suitable descalers can be obtained via our website or from our after sales service Detergent drawer and housing If the washing machine contains detergent or fabric softener residues 1 Pull out the detergent drawer Press down the insert and fully remove the drawer 2 To remove the insert Push the insert upwards from below with your finger 3 Clean the detergent dispenser tray and insert with water and a brush and dry it Clean the inside of the housing as well 4 Fit the insert and lock it in place push the cylinder onto the guide pin 5 Push in the detergent drawer Note Leave the detergent drawer open so that any residual water can evaporate Detergent solution pump blocked Warning Risk of scalding When you wash at high temperatures the water gets very hot If you come into contact with the hot water you may be scalded Allow the water to cool down 1 Turn off the water tap so that no more water can flow in and has to be draine
4. Efficiency test programmes for cotton fabrics The following programmes standard programmes indicated by lt _ are Suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption 29 en Technical data Standard Programs for Cotton under EU Regulation 1015 Programme du 2010 ration Programme Cottons button lt _ EcoPerfect 8 kg svah Programme Cottons button lt _ EcoPerfect 4 kg Sy Il Programme Cottons button L EcoPerfect 4 kg N Programme setting for testing and energy labelling in accordance with Directive 2010 30 EU with cold water 15 C The programme temperature information is based on the temperature stated on the care label for the fabrics The actual washing temperature may deviate from the stated programme temperature for energy saving reasons Technical data Dimensions 850 x 600 x 590 mm Height x width x depth Weight 63 83 kg depending on model Mains connection Mains voltage 220 240 V 50 Hz Nominal current 10 A Nominal output 2300 W Water pressure 100 1000 kPa 1 10 bar Power consumption when switched off 0 14 W Power consumption when ready for use left on mode 1 38 W 30 Positioning and connecting Included with the appliance Note Check the machine for transport damage Never use a damaged machine If you have a complaint please contact the retailer from whom you purchased the a
5. Not a fault the unbalanced load detection system is adjusting the imbalance m Nota fault the unbalanced load detection system is adjusting the imbal ance by repeatedly distributing the laundry m Nota fault the foam detection system active adds an additional rinse cycle Not a fault the programme sequence is optimised for the particular washing changes during the wash process This may lead to changes in the programme duration in the display cycle Residual water in the panel m Nota fault the effect of the care product is not affected compartment amp for care m Clean the insert if necessary products Odours in the washing machine Run Cottons 90 C programme without laundry Use standard detergent The symbol flashes in Too much detergent used the display panel Foam may escape from the detergent drawer Intense noise vibrations and wandering during spinning Display panel indicator Mix one tablespoon of fabric softener with 1 2 litre water and pour into com partment II not for outdoor fabrics sportswear fabrics or those made with down Reduce the detergent dosage for the next wash cycle m Isthe appliance levelled Level the appliance m Are the appliance feet fixed Secure the appliance feet m Transport locks removed Remove the transport locks m Power cut lamps do not function dur m Circuit breakers tripped Switch the circuit breakers back on or replace ing operat
6. it contains an electric valve Observe the following when connecting the machine Notes m Only operate the washing machine using cold mains water m Do not connect the machine to the mixer tap of an unpressurised hot water boiler Do not use a used supply hose Only use the supply hose supplied or one that was purchased from an authorised specialist retailer Do not bend squash modify or cut through the water supply hose otherwise its strength is no longer guaranteed 33 en Positioning and connecting m Only tighten the screw connections by hand If the screw connections are tightened too much with a tool pliers the thread may be damaged Optimum water pressure in the supply network At least 100 kPa 1 bar Maximum 1000 kPa 10 bar When the tap is open the water flow is at least 8 min lf the water pressure is higher than this a pressure reducing valve must be installed Connection Connect the water supply hose to the water tap 26 4 mm and to the appliance not necessary for Aqua Stop models as this is permanently installed Model Standard 34 Note Open the water tap carefully checking the leak tightness of the connection points The screw connection is under mains water oressure Water outlet Caution Water damage If the drain hose slips out of the wash basin or the connection point during draining due to high water pressure an
7. Select additional programme settings18 Placing laundry into the drum 18 Measure and add detergent and care DrOQLGIS rotend saneta mi are Go ee 18 Start the programme 19 Childproof OCK 22 2682 e2e0 e088 2 20 Adding laundry 00005 20 Changing the programme 20 Cancel the programme 20 Programme end during rinse hold 20 Programme end 000 21 Removing laundry switching off the sTo eIn O r E ee i Rs 21 D Sensors c0eceeecaces 21 Automatic load sensing 21 Unbalanced load detection system 21 E Setting the signal 22 Cleaning and maintenance 23 Machine housing control panel 23 OA soet gs dente ae ie pats es ae tea eee a eae 23 Descaling 2 d554 2c ud adhe bared nace ees 23 Detergent drawer and housing 23 Detergent solution pump blocked 23 The drain hose at the siphon is blocked 24 Filter in the water supply blocked 24 Faults and what to do about them Mowe eee oe eee eee 25 Emergency release 0 4 25 Information on the display panel 26 Faults and what to do about them 26 en Intended use After sales service 28 a Consumption rates 29 Energy and water consumption programme duration and residual moisture for the main washing ProgrammeS 0000 ee eee 29 Efficiency test programmes for cotton TADOS 2 oc bus oo es Bac He oe BS ee a 29 Technical data
8. and remove the laundry Select additional settings if necessary Set the programme selector to Start the programme Turn off the water tap for models without Aqua Stop Getting to Know the appliance en Getting to know the appliance Washing machine Detergent drawer gt Page 18 Washing machine door with window handle Controls display elements Open the washing machine door Close the door Service flap en Getting to Know the appliance Control panel Start Easy Care Dark lt Cottons ei Shirts Bl g P h irts Blouses Bd Prewas a SaN E ae Speed Eco lt Aqua Allergy y Easy Care o Perfect Perfect Plus Gc E Outdoor Prewash ag Sportswear U J Mixed Load Super Quick 15 30 Lf Delicate Silk Spin Drain Wool Rinse C temperature Temp C spin speed 4 Programme selector for selecting a rom Ready in time for changing the programme and for switching the machine on programme default settings and off Speed Perfect Eco Perfect CI Display panel for settings and information amp Water Plus Aqua Plus Additional programme settings Start Reload for starting interrupting adding laundry and cancelling a programme Display panel Settings for the selected programme Cold 90 C Temperature Cold 1200 Spin speed max speed depends In rom rotations per minute on the model Rinse hold wit
9. prevent it from being inadvertently adjusted you can select the childproof lock as follows 19 en Operating the appliance Childproof lock You can lock the washing machine to prevent the functions you have set from being changed inadvertently To do this activate the childproof lock after starting the programme To activate deactivate the childproof lock press and hold Start Reload for approx five seconds The symbol appears in the display panel lights up The childproof lock is active m flashes The childproof lock is active and the programme selector was adjusted To prevent the programme from stopping turn the programme selector back to the Original programme The symbol lights up again Note The childproof lock can remain activated until you wish to start the next programme even after switching off the machine You must then deactivate the childproot lock before starting the programme and activate it again as necessary once the programme has started Adding laundry After starting the programme you can add or remove laundry as required To do this press the Start Reload button The Start Reload Dll indicator lamp flashes and the machine checks whether it is possible to add laundry Note Do not leave the washing machine door open for too long when adding laundry as water from the laundry may leak out If the display panel shows Both the YES and symbols lit up it is possi
10. supplied with the washing machine and use the machine accordingly Retain the documents for subsequent use Safety instructions Electrical safety Z Warning Danger of death There is a risk of electric shock if you touch live components Never touch or hold the mains plug with wet hands a Only pull out the mains cable by the plug and never by the cable as this could damage it Risk of injury A Warning Risk of injury a When the washing machine is lifted by its protruding parts e g the washing machine door the components may break off and cause injuries Do not lift the washing machine by protruding parts a lf you climb on the washing machine the worktop may break and cause injuries Do not climb onto the washing machine a lf you lean on the washing machine door when it is open the washing machine may tip over and cause injuries Do not lean on the washing machine door when it is open Safety instructions en a Reaching into the drum when it is turning can cause injuries to hands Do not reach into the drum when it is turning Wait until the drum has stopped turning Z Warning Risk of scalding When you are washing at high temperatures there is a risk of scalding if you come into contact with hot water e g if hot water is being drained into a wash basin Do not reach into the hot detergent solution Safety for children Z Warning Danger of death If child
11. washing machine immediately after the programme has ended 16 The maximum speed that can be set depends on the model and programme that have been selected Overview of programmes Page 13 Ready in time Ready in When you select the programme the relevant programme duration is displayed The programme duration is automatically adjusted when the programme is running Changes to the programme default settings or programme settings also change the programme duration Before starting the programme the programme end Ready in time can be preselected in increments of one hour h hours up to a maximum of 24 hours To do this repeatedly select the corresponding button until the required setting is displayed Note The programme duration is included in the selected Ready in time After the start the preselected time e g 8 h is displayed and the time counts down to the start of the wash programme The programme duration is then displayed e g 2 30 hours minutes Changing the preselected time You can change the preselected time after the start of the programme as follows 1 Press Start Reload 2 Press the Ready in button repeatedly until the required number of hours is displayed 3 Press the Start Reload button Adding laundry while the preselected time continues running 1 Press Start Reload 2 The symbols YES and light up on the display panel The washing machine door can be ope
12. Lists are indicated by a box or a bullet point Contents Intended use 4 Safety instructions 5 Electrical safety nannaa aana aa 5 Risk of INnjUTY n on annaa aaa 5 Safety for children aaaaaa aaa 5 Environmental protection 7 Packaging used appliance 7 Tips on economical use T7 Main points in brief 8 Getting to know the appliance 9 Washing machine 05 9 Control panel 0000 10 Display PANE saad a eawea hewa a 10 Laundry iaaa ce o heen oe oe 11 Prepare the laundry 11 Sorting laundry tod Bee toe 11 Detergent 00000e eens 12 Correct selection of detergent 12 Saving energy and detergent 12 Overview of programmes 13 Programmes on the programme selector hui eke oc hve 5k ye Hoe ad 13 SENO aac ae race we Gre are dre E E 15 Dyeing bleaching 4 15 SOAKING ce ee 15 Programme default settings 16 Temperature Temp C 16 Spin speed rom 0 0 200048 16 Ready in time Ready in 16 Additional programme settings 17 O SpeedPerfect 17 ECOF CMCC se ene G5cse hbo be be 17 amp Water Plus Aqua Plus 17 en BS l l lt 4 Operating the appliance 17 Preparing the washing machine 17 Select programme switch on the appliance noana aa 17 Change the programme default settings Pe ow Be ora a och Behe ak a es 8
13. ad Allow the programme to run for approximately 40 seconds 4 Set the programme selector to Off Disconnect the mains plug 5 Clean the filter on the water tap Remove the hose from the water tap Clean the filter with a small brush PS PSS 6 For standard and Aqua Secure models clean the filter on the rear of the appliance Remove the hose from the rear of the appliance Remove the filter using pliers and clean the filter 7 Connect the hose and check for leaks Faults and what to do about them Emergency release e g in the event of a power cut The programme will continue running when the power supply has been restored However if the laundry has to be removed the washing machine door can be opened as follows Faults and what to do about them en Z Warning Risk of scalding When you are washing at high temperatures there is a risk of scalding if you come into contact with detergent solution and laundry If possible leave it to cool down Z Warning Risk of injury You may injure your hands if you reach into the drum while it is turning Do not reach into the drum when it is turning Wait until the drum has stopped turning Caution Water damage Any escaping water may cause water damage Do not open the washing machine door if water can be seen through the glass 1 Switch off the appliance Disconnect the mains plug 2 Drai
14. ashing result and promotes creasing h a Place presorted items of laundry unfolded in the washing drum 2 Make sure that no items of laundry are trapped between the washing machine door and the rubber seal and close the door The Start button indicator lamp flashes and the programme settings continue to be displayed on the display panel one after another It is possible to change the settings Measure and add detergent and care products Caution Damage to the appliance Cleaning agents and agents for pretreating laundry e g stain removers porewash sprays etc may cause damage if they come into contact with the surfaces of the washing machine Do not allow these agents to come into contact with the surfaces of the washing machine If necessary immediately wipe away spray residue and other residues droplets with a damp cloth Measuring Measure the detergent and care products according to m Water hardness ask your water Supply company m Ihe manufacturer s instructions on the packaging Ihe amount of laundry m soiling Page 12 Filling Z Warning Eye skin irritation Detergent and care products may spray out if the detergent drawer is opened while the machine is in operation Open the drawer carefully Rinse eyes or skin thoroughly if they come into contact with detergent care oroducts lf swallowed accidentally seek medical advice Note Dilute viscous fabric softener and fabr
15. ays this symbol is used KX Only this symbol guarantees compliance with the currently applicable regulations m Ihe mains plug can be accessed at all times m he mains cable is not bent squashed modified cut through or in contact with heat sources Before washing for the first time The washing machine was thoroughly tested before leaving the factory In order to remove any water which may be left over from the test run the first washing cycle without any laundry Notes m The washing machine must be correctly installed and connected From Page 31 m Never use a damaged machine Inform your after sales service Check the machine Remove the protective film from the control panel Connect the mains plug Turn on the water tap Close the washing machine door do not load any laundry Select theCottons programme and set the temperature to 90 C Open the detergent drawer Pour approx 1 litre of water into compartment Il Pour standard detergent into compartment Il 0 PN MSS Dm 36 Note To prevent foaming only use half of the amount of detergent recommended by the detergent manufacturer Do not use detergent for wool or delicates 10 Close the detergent drawer 11 Press Start 12 Switch off the appliance at the end of the programme Your washing machine is now ready to use Transportation e g when moving home Preparatory work 1 Turn off the water tap 2 Reduce the wate
16. ble to add laundry 20 a A flashing NO symbol wait until YES and light up Do not open the door until both the YES and the symbols are lit m A flashing NO symbol it is not possible to add laundry For safety reasons the washing machine door remains locked when the water level or temperature is high or while the drum is rotating and it is not possible to add laundry To continue the programme press the Start Reload button The programme continues automatically Changing the programme If you have started the wrong programme by mistake you can change the programme as follows 1 Press Start Reload 2 Select the other programme 3 Press Start Reload The new programme starts from the beginning Cancel the programme Programmes at high temperatures 1 Press Start Reload 2 To cool the laundry Select Rinse 3 Press Start Reload For programmes at low temperatures 1 Press Start Reload 2 Select Spin or Drain 3 Press Start Reload Programme end during rinse hold appears on the display panel and the Start Reload button indicator lamp flashes To end the programme set the programme selector to Spin Drain or select a spin speed Then press the Start Reload button Programme end End appears on the display panel and the Start Reload button indicator lamp is Off If the amp symbol appears on the display panel the washing machine has detected too much foam during th
17. call the after sales service Faults and what to do about them Faults Cause remedial action Water is leaking out Attach replace the drainage hose correctly Tighten the screw connection of the supply hose No water supply Start Reload not selected Detergent not dispensed Tap not turned on Filter blocked Clean the filter supply hose kinked or trapped safety function active Programme stopped Rinse hold without final spin selected Can be opened by emergency release only Start Reload or Ready in time selected Washing machine door closed c Childproof lock activated Deactivate Washing machine door cannot be opened Programme does not Start 26 Faults Faults and what to do about them en Cause remedial action Detergent solution is not emptied Water not visible in the drum Spin result not satisfac tory Laundry wet too damp Spin cycle started and stopped several times The programme duration is longer than usual The programme duration m Rinse hold without final spin selected m Clean detergent solution pump m Clean the waste pipe and or drainage hose Not a fault water below the visible area m Nota fault the unbalanced load detection system has interrupted the spin because the laundry is unevenly distributed Distribute small and large items of laundry evenly in the drum Easy Iron depending on the model selected m Speed selected too low
18. d via the drain pump 23 en Cleaning and maintenance 2 Switch off the appliance Disconnect the mains plug 3 Open and remove the service flap 4 Take the drain hose out of the retainer Remove the sealing cap allow the detergent solution to flow out into a Suitable container Replace the sealing cap and place the drainage hose in the retainer 5 Carefully unscrew the pump cover residual water may leak out Clean the interior pump cover thread and pump housing The impeller in the detergent solution pump must be able to rotate Refit the pump cover and screw it on tightly The handle must be ina vertical position 6 Place the service flap back on lock it into place and close it 24 Note To prevent unused detergent from flowing straight into the drain during the next wash Pour 1 litre of water into compartment Il and start the Drain programme The drain hose at the siphon is blocked 1 Switch off the appliance Disconnect the mains plug 2 Loosen the hose clamp Carefully remove the drain hose residual water may leak out 3 Clean the drainage hose and siphon connecting piece 4 Reattach the drainage hose and secure the connection using the hose clamp Filter in the water supply blocked For this first reduce the water pressure in the supply hose 1 Turn off the water tap 2 Select any programme except Rinse Spin Drain 3 Press Start Relo
19. dry information Settings Wool Max 2 kg Hand or machine washable fabrics made of wool or that contain wool Particularly gentle wash programme to prevent shrinkage of laundry with longer programme breaks fabrics rest in the detergent solu tion Notes Wool is of animal origin e g Angora alpaca llama sheep m Use a detergent which is suitable for machine washing wool Rinse Extra rinse with spin Spin Drain Cold 40 C 800 rpm Max 8 kg 1200 rom amp Max 8 kg Extra spin with speed that can be selected If only the Drain cycle is required set the spin speed to Super Quick 157 30 Extra short programme of approx 15 30 minutes suitable for small items of lightly soiled laundry Sportswear For fabrics made of microfibres for sports and leisure Notes m Ihe laundry must not be treated with fabric softener Before washing clean the detergent drawer thoroughly all com partments to remove fabric softener residue Outdoor Weatherproof and outdoor clothing with a membrane coating and water repellent fabrics Notes m Use special detergent suitable for machine washing add the correct dosage to compartment Il in accordance with the manu facturer s instructions m Ihe laundry must not be treated with fabric softener Before washing clean the detergent drawer thoroughly all com partments to remove fabric softener residue 14 1200 rom a
20. e wash programme and automatically switched on a rinse cycle to remove the foam Note Add less detergent for the next washing cycle with the same load Removing laundry switching off the appliance 1 Open the washing machine door and remove the laundry 2 Set the programme selector to Off The appliance is switched off 3 Turn off the water tap Note Not required for Aqua Stop models Notes Do not leave any items of laundry in the drum They may shrink in the next wash or discolour another item m Remove any foreign objects from the drum and the rubber seal risk of rusting m Leave the washing machine door and detergent drawer open so that any residual water can dry away Always wait for the end of the programme otherwise the appliance may still be locked Then switch on the appliance and wait for it to unlock Sensors en lf the display panel goes off at the end of a programme energy saving mode is active To activate the panel press any button Sensors Automatic load sensing The automatic load sensing function adapts the water consumption ideally to each programme depending on the type of fabric and the load Unbalanced load detection system The automatic unbalanced load detection system detects imbalances and ensures even distribution of the laundry by repeatedly starting and stopping drum spinning If the laundry is extremely unevenly distributed the speed is reduced or
21. entally responsible manner This appliance is labelled in accordance with European Directive 2012 19 EU concerning used electrical and electronic appliances waste electrical and electronic equipment WEEE The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU Tips on economical use m Always fill the appliance with the maximum amount of laundry for the relevant programme Overview of programmes Page 13 Environmental protection en Wash normally soiled laundry without a prewash Save energy and detergent when washing lightly and normally soiled laundry gt Page 12 Energy saving mode The display panel lighting goes out after a few minutes and Start flashes To activate the lighting press any button Energy saving mode is not activated if a programme is running If the laundry is subsequently dried in a tumble dryer select the spin speed according to the tumble dryer manufacturer s instructions en Main points in brief Main points in brief t Connect the mains ay Turn on the water plug le select a programme Observe the e g Cottons maximum load on the display panel sort the laundry Load the laundry Open the door Close the washing machine door Add detergent Change the programme default settings if necessary Programme end Open the washing machine door
22. hout final spin 1 30 Programme duration Depends on the programme selection in h min hours minutes 1 24h Ready in Programmes ends after h h hours 8 0 kg Max load Status indicators for the programme progress programme sequence 4 wy End Wash rinse spin programme duration or end Open the washing machine door add laundry Childproof lock 10 Laundry Prepare the laundry Caution Damage to the appliance fabrics Foreign objects e g coins paper clips needles nails may damage the laundry or components in the washing machine Therefore note the following tips when preparing your laundry m Empty pockets m Look out for metal items paperclips etc and remove them m Wash delicates in a laundry bag tights underwired bras etc m Close any zips button up any cover buttons m Brush sand out of pockets and collars m Remove curtain fittings or place Curtains in a laundry bag Sorting laundry sort your laundry according to the care instructions and manufacturer s information on the care labels Type of fabric fibre Colour Note Laundry can discolour or not be cleaned correctly Wash white and coloured laundry separately Wash new bright fabrics separately the first time you wash them m Soiling Wash laundry with the same level of soiling together Laundry en You can find examples of levels of soiling on Page 12 Light Do not prewash
23. ic conditioner with water this prevents blockages Pour the detergent and care products into the appropriate compartments Measuring aid A For liquid detergent Compartment Il Detergent for the main wash water softener bleach stain remover Compartment amp Fabric softener starch Do not exceed the max Compartment Detergent for prewash 1 Pull out the detergent drawer as far as possible 2 Add detergent and or care products Operating the appliance en 3 Close the detergent drawer Measuring aid for liquid detergent depending on the model Position the measuring aid for measuring the correct amount of liquid detergent 1 Pull out the detergent drawer Press down the insert and fully remove the drawer 2 Slide the measuring aid forwards fold it down and click it into place 3 Reinsert the drawer Note Do not use the measuring aid for gel detergents and washing powder or for programmes with prewash or when Ready in time is selected For models without a measuring aid pour the liquid detergent into the appropriate dispenser and place it in the drum Start the programme Select the Start Reload button The indicator lamp lights up and the programme starts During the programme the display panel shows the Ready in time or after starting the wash programme the programme duration and the symbols for the programme progress Page 10 Note If you want to lock the programme to
24. ion them m Ifthe fault occurs repeatedly call the after sales service Detergentresiduesonthe m Occasionally phosphate free detergents contain water insoluble residues laundry m Select Rinse or brush the laundry after washing NO appears onthe m Water level too high Not possible to add laundry Close the washing display in reload mode machine door immediately if open m Select Start Reload to continue the programme 27 en After sales service Faults Cause remedial action YES appears on the dis The washing machine door is unlocked It is possible to add laundry play in reload mode If you cannot correct a fault yourself after switching off on or a repair is required m Turn the programme selector to Off Appliance is switched off m Unplug the mains plug from the socket m urn off the tap and call the after sales service After sales service If you cannot correct the fault yourself see section Faults and what to do about them gt Page 25 please contact our after sales service gt Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers Please give the after sales service the product number E no and the oroduction number FD of the appliance E N FD Product number Production number You can find this information depending on the model On the inside of the washing machine door in the opened ser
25. m he maximum load 17 en Operating the appliance Change the programme default settings You can use the default settings or change them To do this repeatedly select the corresponding button until the required setting is displayed The settings are activated without needing to be confirmed They are not saved when the appliance is switched off Programme default settings Page 16 Overview of programmes from Page 13 Select additional programme settings By selecting additional settings you can better adapt the washing process to your items of laundry The settings can be selected or deselected depending on the programme progress The indicator lamp for the button lights up if a setting is active The settings are not saved when the appliance is switched off Additional settings gt Page 17 Overview of programmes from Page 13 Placing laundry into the drum Z Warning Danger of death Items of laundry pretreated with cleaning agents that contain solvents e g stain remover cleaning solvent may cause an explosion after being loaded into the washing machine Hand rinse items of laundry thoroughly beforehand 18 Notes Mix items of laundry of varying sizes Laundry items of different sizes distribute themselves better during the spin cycle Individual items of laundry may lead to imbalances m Observe the specified maximum load Overfilling has a negative impact on the w
26. mp Max 2 kg 3 5 kg Cold 40 C 1200 rpm Max 2 kg Cold 40 C 800 rpm 0 amp Max 2 kg Cold 40 C 800rpm 0 amp Overview of programmes en Programme type of laundry information Settings Allergy Max 7 9 kg 5 kg Hard wearing fabrics Cold 60 C Note Longer washing and rinsing at a higher water level for particu ___ 49QqQ rom larly sensitive skin S Shirts Blouses Max 2 kg For non iron shirts or blouses made of cotton linen synthetic fibres Cold 60 C or blended fabrics 800 rpm Note Use the Delicates Silk programme to wash shirts blouses made of silk delicate fabrics OTe Easy Care Dark Max 3 9 kg Dark fabrics made of cotton and dark easy care fabrics Call O E Turn laundry inside out before washing e TOO 0 Starching 4 After approx ten minutes press start Reload Note Laundry must not be treated with 5 After the required soaking time fabric softener press Start Reload again to a continue or change the programme Starching is possible in all wash programmes if liquid starch is used Notes Measure starch into compartment amp in m Load laundry of the same colour accordance with the manufacturer s m No additional detergent is required instructions clean first if necessary the soaking solution is used for washing Dyeing bleaching Dye should only be used in normal household quantities Salt may damage Stainle
27. n the detergent solution 3 Pull the emergency release downwards with a tool and release The washing machine door can then be opened 25 en Faults and what to do about them Information on the display panel Display Cause remedial action NES The washing machine door is unlocked It is possible to add laundry NO m lemperature too high Wait until the temperature drops m Water level too high Not possible to add laundry Close the washing machine door immediately if open Select Start Reload to continue the programme flashes m Laundry may be caught Please open and close the washing machine door again and select Start Reload m f necessary push the washing machine door closed or remove the laundry and push it closed again m lf required switch appliance off and on again set the programme and make individual settings start the programme ele m urn the water tap on fully m supply hose kinked or trapped m water pressure too low Clean the filter E 18 m Detergent solution pump blocked Clean detergent solution pump m he drain hose waste pipe is blocked Clean the drain hose on the siphon EZ Water in the base tub appliance leaking Turn off the tap Call the after sales ser vice C Childproof lock activated deactivate it 4 flashes Too much foam detected a rinse cycle has been switched on Other displays switch off appliance wait five seconds and switch on again If the display is indi cated again
28. ned and laundry can be added 3 Close the washing machine door 4 Press the Start Reload button The oreselected time continues to run ad Additional programme settings U SpeedPerfect For washing in a shorter time with a washing result comparable to that of the standard programme Note Do not exceed the maximum load Overview of programmes gt Page 13 EcoPerfect For saving energy with a washing result comparable to that of the standard programme amp Water Plus Aqua Plus Increased water level and additional rinse cycle extended washing time For areas with very soft water or for further enhancing the spin result Additional programme settings en Operating the appliance Preparing the washing machine Note The washing machine must be correctly installed and connected From Page 37 Connect the mains plug Turn on the water tap Open the door Check that the drum is completely drained Drain if necessary ee Select programme switch on the appliance Note If you have activated the childproof lock you must first deactivate it before you can set a programme Page 20 Use the programme selector to select the required programme Can be turned in either direction The machine is switched on The display panel shows the following information consecutively for the selected programme m Ihe programme duration Ihe preset temperature m he preset spin speed and
29. onnection points for the water supply hose and water drain hose are 31 en Positioning and connecting under high water pressure To prevent leaks and water damage you must follow the instructions in this section Notes In addition to the safety information listed here the local water and electricity supplier may have special requirements m lf in doubt have the appliance connected by a specialist Installation surface Note The washing machine be stable so that it does not move around The installation surface must be firm and level m soft floors floor coverings are not Suitable Installation on a base ora wooden joist floor Caution Damage to the appliance The washing machine may wander and tip topple from the base when spinning The feet of the appliance must be secured with holding brackets Order no WMZ 2200 WX 9756 CZ 110600 Z 7080X0 Note On wooden joist floors install the washing machine m In a corner if possible On a water resistant wooden board min 30 mm thick which is screwed tightly to the floor Installing the appliance in a kitchenette Z Warning Danger of death There is a risk of electric shock if you touch live components 32 Do not remove the appliance covering olate Notes m Recess width of 60 cm required Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets Removing the transpo
30. ppliance or our after sales service Mains cable Bag m Installation and operating instructions m After sales service location directory m Warranty m Cover caps for openings left after removing the transport locks m Wrench Water supply hose on Aqua Stop models Water drain hose Positioning and connecting en Elbow for securing the water drain hose L 6 Water supply hose on standard Aqua secure models depending on the model In addition a hose clamp 24 40 mm diameter available from specialist dealers is required to connect the water drain hose to a siphon Useful tools m Spirit level for levelling m Wrench with WAF 13 for loosening the transport locks and WAF 17 for aligning the appliance feet Safety instructions Warning Risk of injury m Ihe washing machine is very heavy Be careful when lifting transporting the washing machine m When the washing machine is lifted by its protruding parts e g the washing machine door the components may break off and Cause injuries Do not lift the washing machine by protruding parts Ifthe hose and mains cables are not routed properly there is a risk of tripping and injury Lay hoses and cables in such a way that there is no risk of tripping Caution Damage to the appliance Frozen hoses may rip burst Do not install the washing machine in areas exposed to frost or outdoors Caution Water damage The c
31. r pressure in the supply hose Maintenance filter in the water supply Page 24 3 Drain the remaining detergent solution Maintenance detergent solution pump blocked Page 23 4 Disconnect the washing machine from the mains 5 Remove the hoses Installing the transport locks 1 Remove the covers and keep them in a safe place Use a screwdriver if necessary 2 Insert all four sleeves Clip the mains cable securely in the holders Insert and tighten the screws Positioning and connecting en Before initial use Notes m Ihe transport locks must be removed m lo prevent unused detergent from flowing straight into the drain during the next wash Pour approximately 1 litre of water into compartment II and select and start the Drain programme or Aquastop guarantee only for appliances with Aquastop In addition to warranty claims against the seller from the purchase agreement and in addition to our appliance warranty we provide replacement under the following conditions 1 If damage is caused by water due to a malfunction of our Aquastop system we make good the damage suffered by private customers 2 This liability warranty is valid for the service life of the appliance 3 Aclaim can only be made under the warranty if the appliance and Aquastop have been correctly installed and connected according to our instructions this also includes a correctly installed Aquastop extension original accessor
32. ren play with the washing machine they may get into life threatening situations or injure themselves Do not leave children unattended near the washing machine Do not let children play with the washing machine Z Warning Danger of death Children may lock themselves in appliances putting their lives at risk For appliances that have the end of their service life a Disconnect the mains plug en Safety instructions a Cut through the mains cable and remove it along with plug Destroy the lock on the washing machine door Z Warning Risk of suffocation Children may become wrapped in packaging film or packing parts if allowed to play with them or they may pull them over their heads and suffocate Keep packaging film and packaging parts out of the reach of children Z Warning Risk of poisoning Detergents and care products may be poisonous if consumed Keep detergents and care oroducts out of the reach of children Z Warning Eye skin irritation Detergents and care products may cause Irritation if they come into contact with the eyes or skin Keep detergents and care products out of the reach of children Z Warning Risk of injury When you wash at high temperatures the glass in the a machine door gets ot Do not let children touch the hot washing machine door Environmental protection Packaging used appliance x Dispose of packaging in an environm
33. rt locks Caution Damage to the appliance m Ihe machine is secured for transportation using transport locks If the transport locks are not removed the drum for example may become damaged when the machine is operated Before using the appliance for the first time make sure that you completely remove all four transport locks Keep the locks in a safe place m To prevent transport damage from occurring if the appliance is moved at a later date you must refit the transport locks before transporting the appliance Note Keep the screws and sleeves in a safe place 2 Unscrew and remove all four transport brace screws Remove the sleeves To do this remove the mains cable from the holders 3 Fit the covers Lock the covers firmly in place by applying pressure to the Snap in hooks Hose and cable lengths m Left hand connection O So gt lt oO oO m Right hand connection Positioning and connecting en Jt O 2D gt lt Tip The following are available from specialist dealers the after sales Service m An extension for Agua Stop or cold water supply hose approx 2 50 m order no WMZ2380 WZ10130 CZ11350 Z7070X0 A longer supply hose approx 2 20 m for standard model Water inlet Warning Danger of death There is a risk of electric shock if you touch live components Do not immerse the Aqua Stop safety valve in water
34. s cold max 60 C Detergent for colours delicates without optical brighteners Suitable for coloured laundry made from easy care fibres synthetic fibres Programme Easy Care cold max 60 C Detergent for delicates Suitable for delicate fine fabrics silk or viscose Programme Delicate Silk cold max 40 C Detergent for woollens Suitable for wool Wool programme cold max 40 C Saving energy and detergent For light and normal soiling you can save energy lower washing temperature and detergent 12 Saving Soiling note Reduced temper Light ature and deter No visible dirt or stains Cloth gent quantity as ing has taken on some body per the recom Odour g mended dosage Light summer sports clothing worn for a few hours m shirts shirts blouses worn for up to one day m Guest bed linen and hand towels used for one day Normal Visible dirt or a few light stains g m shirts shirts blouses sweat soaked worn a few times m Towels bedding used for up to one week Temperatureas Heavy per the care label Dirt and or stains clearly visi and detergent ble e g tea towels baby quantity as per items work clothing the recom mended dosage for heavy soiling Note When measuring the amount of all detergents additives care products and cleaning agents please always check the manufacturer s instructions and information gt Page 18 Over
35. sary Change the height by turning the appliance feet All four appliance feet must stand firmly on the ground Tighten the lock nut against the housing Positioning and connecting en In doing so hold the foot tight and do not adjust its height The lock nuts on all four appliance feet must be screwed tightly against the housing Electrical connection Warning Danger of death There is a risk of electric shock if you touch live components m Never touch or hold the mains plug with wet hands m Only pull out the mains cable by the plug and never by the cable as this could damage it m Never unplug the mains plug during operation Observe the following information and ensure that Notes m Ihe mains voltage and voltage indicated on the washing machine rating plate are the same The connected load and fuse required are specified on the rating plate m he washing machine is only connected to an alternating current via a properly installed earthed socket The mains plug fits the socket The cable cross section is adequate m he earthing system is properly installed 35 en Positioning and connecting m Ihe mains cable is only replaced by a qualified electrician if this is necessary Replacement mains cables are available from the after sales service No multiple plugs couplings or extension cables are used m lf an earth leakage circuit breaker is used only a type which displ
36. select the Speed Perfect setting if necessary Normal Heavy Load less laundry select a programme with prewash Stains Remove pretreat stains while they are fresh First dab the stain with soapy water do not rub Then wash the items of laundry with the appropriate programme Stubborn dried in stains can sometimes only be removed with several washes Symbols on the care labels The numbers in the symbols indicate the maximum washing temperature which may be used 7 Suitable for a normal washing process e g Cottons programme A gentle washing process is required e g Easy Care programme W Anespecially gentle washing process is required e g Delicate Silk programme yw Suitable for washing by hand e g Wool programme Do not wash the laundry in the machine 11 en Detergent Detergent Correct selection of detergent The care label is crucial for selecting the correct detergent temperature and treatment of the laundry gt See also www sartex ch If you visit www cleanright eu you will find further information on detergents care products and cleaning agents for domestic use Standard detergent with optical brighteners Suitable for boil washable white laundry made from linen or cotton Programme Cottons cold max 90 C Detergent for colours without bleach or optical brighteners Suitable for coloured laundry made from linen or cotton Programme Cotton
37. ss steel Always follow the dye manufacturer s Instructions Do not use the washing machine to bleach clothes Soaking 1 Pour soaking agent detergent into compartment Il in accordance with the manufacturer s instructions 2 Turn the programme selector to Cottons 30 C programme 3 Press Start Reload 15 en Programme default settings Programme default settings The temperature spin soeed and programme duration Ready in time for all programmes are preset at the factory These are displayed in the display panel after selecting the programme You can change the default settings as follows Temperature Temp C Depending on the programme progress you can change the preset temperature in C before and during the programme To do this repeatedly select the corresponding button until the required setting is displayed The maximum temperature that can be set depends on the programme which has been selected Overview of programmes Page 13 Spin speed rpm Depending on the programme progress you can change the spin speed in rom rotations per minute before and during the programme To do this repeatedly select the corresponding button until the required setting is displayed Setting Rinse hold without final spin the laundry remains in the water after the final rinse You can select Rinse hold to prevent creasing if the laundry will not be taken out of the
38. the spin cycle is not performed for safety reasons Note Place large and small items of laundry evenly in the drum gt Page 26 21 en Setting the signal Ed Setting the signal 1 Activate the setting mode for the signal volume Set to Press and hold the rom button and turn Press and hold the button for approx one position to the right five seconds until the display elements light up Setting mode is activated 2 Set the volume for the button signals depending on the model Press the button repeatedly until the desired Goto point Setto to exit the setting mode for the sig volume is reached 3 Or nal volume nf _ 01234 3 Set the volume for the information signals Turn the dial one position Press the button repeatedly Set to to exit the setting mode for the signal to the right until the desired volume is volume reached 22 Cleaning and maintenance Z Warning Danger of death There is a risk of electric shock if you touch live components Switch off the appliance and unplug the mains plug Z Warning Risk of poisoning Toxic vapours can be produced by cleaning agents that contain solvents e g cleaning solvent Do not use cleaning agents that contain solvents Caution Damage to the appliance Cleaning agents that contain solvents e g cleaning solvent can damage Surfaces and components in the machine Do not use cleaning agents that contain solvents
39. vice flap and on the rear of the appliance Trust the expertise of the manufacturer Contact us for assistance By doing so you will ensure that the repairs are carried out by trained service personnel using genuine spare parts 28 Consumption rates en Consumption rates Energy and water consumption programme duration and residual moisture for the main washing programmes approximate information Programme Energy consumption Water Programme duration Cottons 20 C 8 kg 0 40 kWh fy 2 3 4h Cottons 40 C 8 kg 1 10 kWh ain 2 3 4 h Cottons 60 C 8 kg 1 91 kWh i 23 4h Cottons 90 C 8 kg 2 39 kWh 82 AoA Easy Care 40 C 4kg 0 79 kWh Oe 2h Mix ed Load 40 C 3 0 kg 0 51 kWh 45 11 4h Delicate Silk 30 C 2 kg 0 21 kWh 36 3 4 h Wool 30 C 2 kg 0 22 kWh A 3 4 h Programme Approximate information on the residual moisture WAK28 WAK24 WAK20 WM14K WM12K WM10K max 1400 rpm max 1200 rpm max 1000 rpm Cottons 48 03 62 Easy Care 40 40 40 Delicate Silk 30 30 30 Wool A5 45 A5 The values may deviate from the stated values depending on the following factors water pressure and hardness water inlet temperature ambient temperature type amount and soiling of laundry type of detergent used fluctuations in the power supply and additional functions selected Information on residual moisture based on programme dependent spin speed limits and maximum loads
40. view of programmes en Overview of programmes Programmes on the programme selector Programme type of laundry information Settings Name of programme Brief explanation of the programme and for which fabrics it is suita ble Cottons Hard wearing fabrics heat resistant fabrics made of cotton or linen Cottons Prewash Programme with pre wash divide the detergent between compartments and Il Note The Speed Perfect setting is suitable as a short pro gramme for lightly soiled laundry Easy Care Fabrics made from synthetic or blended fabrics Easy Care Prewash Programme with pre wash divide the deter gent between compartments I and Il Mixed Load A mixed load of fabrics made of cotton and synthetic fabrics Delicate Silk For delicate washable fabrics e g made of silk satin synthetic fibres or blended fabrics e g silk blouses silk scarves Note Use a detergent which is suitable for machine washing deli cates or silk Max load reduced load at Speed Per fect setting Temperature that can be selected spin speed that can be selected Max spin speed depending on the model Possible programme settings Max 8 kg 5 kg Cold 90 C 1200 rom 0 Max 4 kg Cold 60 C 1200 rom or ory Max 3 5 kg Cold 40 C 1200 rom 0 Max 2 kg Cold 40 C 800 rpm 0 a 13 en Overview of programmes Programme type of laun
41. y Our warranty does not cover defective supply lines or fittings up to the Aquastop connection on the tap 4 In principle it is not necessary to monitor an appliance with Aquastop during operation or to secure it afterwards by turning off the tap You should only turn off the tap if you are away from home for a prolonged period e g on vacation for several weeks OIRD TS Repair order and advice on faults US 800 944 2904 toll free Contact information for all countries can be found on the enclosed customer service list Robert Bosch Hausgerate GmbH Carl Wery StraBe 34 81739 Munchen DEUTSCHLAND 9001008747 9407
42. y escaping water may cause water damage Secure the drain hose so that it cannot Slip out Note Do not kink the water drain hose or put strain on it lengthways You can lay the water drain hose as follows Outlet ina sink Warning Risk of scalding When you are washing at high temperatures there is a risk of scalding if you come into contact with hot detergent solution e g if hot detergent solution is being drained into a wash basin Do not reach into the hot detergent solution Caution Damage to the appliance fabrics If the end of the drain hose is immersed in the drained water water may be sucked back into the appliance and may damage the appliance fabrics Make sure that The plug does not block drainage from the sink The end of the drain hose is not immersed in the drained water The water drains away quickly enough Drainage into a siphon The connection point must be secured using a hose clamp with a diameter of 24 40 mm available from specialist dealers Outlet into a plastic pipe with rubber bushing or into a drainage pit Levelling Level the appliance using a spirit level Incorrect levelling may result in intense noise vibrations and wandering 1 Loosen the lock nuts using a wrench by turning it in a clockwise direction Check the alignment of the washing machine with a spirit level and adjust it if neces
Download Pdf Manuals
Related Search