Seagate Enterprise ST3000VN0001-20PK hard disk drive
Contents
1. 23 4 3 2 Set Features command 26 4 3 3 S M A R T 2 27 Seagate Enterprise NAS SRS HDD Product Manual Rev 2 Figures Figure 1 Attaching SATA 0 2 4 18 Figure 2 Mounting dimensions 2 3 4 amp BTB 15 19 Figure 3 Mounting dimensions 6TB 19 Seagate Enterprise NAS SRS HDD Product Manual Rev A 3 Seagate Technology Support Services For information regarding online support and services visit http www seagate com about contact us technical support Available services include Presales amp Technical support Global Support Services telephone numbers amp business hours Authorized Service Centers For information regarding Warranty Support visit http www seagate com support warranty and replacements For information regarding data recovery services visit http www seagate com services software data recovery services For Seagate OEM and Distribution partner portal visit http www seagate com partners For Seagate reseller portal visit http www seagate com partners my spp dashboard Seagate Enterprise NAS SRS HDD Product Manual Rev A 4 1 0 Introduction This manual describes the functional2. 50H Identify Device ECy Idle E34 Idle Immediate Ely Initialize Device Parameters 91H Read Buffer E44 Read DMA Read DMA Extended 25 Read DMA Without Retries C94 Read Log Ext 2Fy Read Multiple Read Multiple Extended 294 Read Native Max Address F84 Read Native Max Address Extended 274 Read Sectors 204 Read Sectors Extended 244 Read Sectors Without Retries 214 Read Verify Sectors 40H Read Verify Sectors Extended 424 Read Verify Sectors Without Retries 41H Recalibrate 104 Security Disable Password F64 Security Erase Prepare F3y Security Erase Unit F44 Security Freeze F54 Security Set Password Fly Security Unlock F2y Seek 704 Set Features EFy Set Max Address 9 Seagate Enterprise NAS SRS HDD Product Manual Rev 21 www seagate com SATA Interface Table 8 SATA standard commands continued Command name Command code in hex Note Individual Set Max Address Address 001 commands are identified by the value Password O14 placed in the Set Max Features register Lock 02 as defined to the right Unlock 03 Freeze Lock 04H Set Max Address Extended 374 Set Multiple Mode C6y Sleep E6y S M A R T Disable Operations D9y S M A R T Enable Disable Autosave D24 S M A R T Enable Operations D8y S M A R T Execute Offline D4y S M A R T Read Attribute Thresholds Diy
3. 16 2 14 1 Safety certification 295 Rede eee ae owe ed 16 2 14 2 Electromagnetic 16 2 14 9 EGG veriflCalOnm i uses rebrand dha bas aed 16 2 15 Environmental 1 17 2 15 1 European Union Restriction of Hazardous Substances RoHS Directive 17 2 15 2 China Restriction of Hazardous Substances RoHS Directive 17 2 16 Corrosive 4 17 3 0 Configuring and Mounting the Drive 18 3 1 Handling and static discharge precautions 18 3 2 Configuring the 1 18 3 3 SATA cables and connectors 18 3 4 Drive MOUNUING hens eee 18 4 0 SATA Interfa e ie i cece ieee E eee eee M RS ae ee we eye 20 4 1 Hot Plug compatibility sssi sridi eee hee eee eed bode ee eka ve pem es 20 4 2 SATA device plug connector pin definitions 20 4 3 Supported ATA 21 4 3 1 Identify Device
4. 9 2 8 Power Specificatioris sce RERO abaci RR wate 9 2 8 1 Power 9 2 8 2 Gonducted NOISE 22 22 25 eda x Re ea Rae Baca 10 2 8 3 Voltage toleranCe ees ove es ew re eG oe Reta ER x 10 2 8 4 Power management 11 2 9 Environmental 5 0 11 2 9 1 Ambient Temperature drive case temperature 11 2 9 2 Temperature gradient 0 000 eee 11 2 9 3 lu nates dada Roem 12 2 9 4 AIMUGC 20242 PT 12 2 9 5 ETE 12 2 9 6 Non operating vibration 1 12 240 AGOUSIICSIC eda eus data ann aed acer tee A T M cM 13 2 10 1 Test for Prominent Discrete Tones 5 13 2 11 Electromagnetic 13 2 12 MTBF and Warranty 2 05 Geos aes Peed Meee exu pex ou eed ead tee ake 13 2 13 Seagate Rescue Data Recovery Service 3 year coverage concurrent with bare drive 14 2 14 Agency
5. seacare Product Manual Seagate Enterprise NAS SRS HDD T Hescue DATA RECOVERY SERVICES ST6000VNO0011 5 5000 0011 5 4000 0011 5 3000 0011 5 2000 0011 2 100771866 Rev January 2015 Document Revision History Revision Date Description of Change Rev 01 21 2015 Initial release 2015 Seagate Technology LLC All rights reserved Publication number 100771866 Rev A January 2015 Seagate Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and or other countries Enterprise NAS SRS HDD v2 and SeaTools are either trademarks or registered trade marks of Seagate Technology LLC or one of its affiliated companies in the United States and or other countries All other trademarks or registered trademarks are the property of their respective owners No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC Call 877 PUB TEK1 877 782 8351 to request permission When referring to drive capacity one gigabyte or GB equals one billion bytes and one terabyte or TB equals one trillion bytes Your computer s operating system may use a different standard of measurement and report a lower capacity In addition some of the listed capacity is used for formatting and other functions and thus will not be available for data storage Actual quantities will vary based on vari
6. These drives use the industry standard Serial ATA SATA interface that supports FIS data transfers It supports ATA programmed input output PIO modes 0 to 4 multiword DMA modes 0 to 2 and Ultra DMA modes 0 to 6 For detailed information about the SATA interface refer to the Serial ATA High Speed Serialized AT Attachment specification 41 Hot Plug compatibility Enterprise NAS SRS HDD v2 drives incorporate connectors which enable users to hot plug these drives in accordance with the SATA Revision 3 0 specification This specification can be downloaded from www serialata org 4 22 SATA device plug connector pin definitions Table 7 summarizes the signals on the SATA interface and power connectors Table 7 SATA connector pin definitions Segment Pin Function Definition Signal 51 Ground 2nd mate 52 Differential signal pair from Phy 53 54 Ground 2nd mate 55 Differential signal pair from Phy 56 B S7 Ground 2nd mate Key and spacing separate signal and power segments Power P1 V33 3 3V power P2 V33 3 3V power P3 V33 3 3V power pre charge 2nd mate P4 Ground 151 mate 5 Ground 2nd mate P6 Ground 2nd mate P7 V5 power pre charge 2nd mate P8 V5 5V power P9 V5 5V power P10 Ground 2nd mate P11 Ground or LED signal If grounded drive does not use deferred spin P12 Ground 1st mate P13 Vio 12V power pre charge 2nd mate P14 Vie 12V power P15 12V power
7. 3 70W 0 18A 0 23A Operating 5 30W 0 355A 0 297A Standby 0 60W 0 12A 0 01A Sleep 0 60W 0 12A 0 01A During periods of drive idle some offline activity may occur according to the S M A R T specification which may increase acoustic and power to operational levels 5W IDLE with DIPLM Enabled 2 8 2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80 ohm resistive load on the 12 volt line or an equivalent 15 ohm resistive load on the 5 volt line Using 12 volt power the drive is expected to operate with a maximum of 120 mV peak to peak square wave injected noise at up to 10 2 Using 5 volt power the drive is expected to operate with a maximum of 100 mV peak to peak square wave injected noise at up to 10 2 Noe Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read write current 2 8 3 Voltage tolerance Voltage tolerance including noise e 5V 5 e 12V 10 7 5 Seagate Enterprise NAS SRS HDD Product Manual Rev A 10 www seagate com Drive Specifications 2 8 4 modes The drive provides programmable power management to provide greater energy efficiency most systems users control power management through the system setup program The drive features the following power management modes Power modes Heads Spindle Buffer Active Tracking Rota
8. S M A R T Read Data S M A R T Read Log Sector D54 S M A R T Return Status DAy S M A R T Save Attribute Values D3y S M A R T Write Log Sector Standby E2u Standby Immediate Write Buffer E84 Write DMA Write DMA Extended 35H Write DMA FUA Extended Write DMA Without Retries CBy Write Log Extended 3Fy Write Multiple C5y Write Multiple Extended 394 Write Multiple FUA Extended Write Sectors 304 Write Sectors Without Retries 31H Write Sectors Extended 344 Write Uncorrectable 45H Seagate Enterprise NAS SRS HDD Product Manual Rev A 22 www seagate com SATA Interface 4 3 1 Identify Device command The Identify Device command command code transfers information about the drive to the host following power up The data is organized as a single 512 byte block of data whose contents are shown in on page 21 All reserved bits or words should be set to zero Parameters listed with an x are drive specific or vary with the state of the drive The following commands contain drive specific features that may not be included in the SATA specification Table9 Identify Device commands Word Description Value Configuration information Bit 15 0 ATA 1 0 Bit 7 removable media 0C5A Bit 6 removable controller Bit 0 reserved 1 Numbe
9. Notes 1 All pins a single row with a 1 27 mm 0 050 in pitch 2 The comments on the mating sequence apply to the case of backplane blindmate connector only In this case the mating sequences are the ground pins P4 and P12 the pre charge power pins and the other ground pins the signal pins and the rest of the power pins 3 There are three power pins for each voltage One pin from each voltage is used for pre charge when installed in a blind mate back plane configuration All used voltage pins must be terminated Seagate Enterprise NAS SRS HDD Product Manual Rev 20 www seagate com SATA Interface 4 3 Supported ATA commands The following table lists SATA standard commands that the drive supports For a detailed description of the ATA commands refer to the Serial ATA International Organization Serial ATA Revision 3 0 http www sata io org See S M A R T commands on page 27 for details and subcommands used in the S M A R T implementation Table8 SATA standard commands Command name Command code in hex Check Power Mode E5y Device Configuration Freeze Lock B1y Device Configuration Identify C24 Device Configuration Restore Device Configuration Set Device Reset 08H Download Microcode 924 Execute Device Diagnostics 90H Flush Cache E7y Flush Cache Extended
10. humidity Supports hotplug operation per the Serial ATA Revision 3 0 specification Yes All specifications above are based on native configurations One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity Accessible capacity may vary depending on operating environment and formatting During periods of drive idle some offline activity may occur according to the S M A R T specification which may increase acoustic and power to operational levels 2 2 Formatted capacity Model Formatted capacity Guaranteed sectors Bytes per sector 5 6000 0011 6000GB 11 721 045 168 5 5000 0011 5000GB 9 767 541 168 5 4000 0011 4000GB 7 814 037 168 4K ST3000VN0011 3000GB 5 860 533 168 ST2000VN0011 2000GB 3 907 029 168 One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity Accessible capacity may vary depending on operating environment and formatting Seagate Enterprise NAS SRS HDD Product Manual Rev 7 www seagate com 2 2 1 LBA mode When addressing these drives in LBA mode all blocks sectors are consecutively numbered from 0 to n 7 where nis the number of guaranteed sectors as defined above See Section 4 3 1 Identify Device command words 60 61 and 100 103 for additional information about 48 bit addressing support of drives with capacities over 137GB 2
11. statutes ordinances and regulations relating to the Program You acknowledge that violations of these Program Terms could subject you to criminal or civil penalties The goods licensed or provided or services provided through the Program which may include technology and software are subject to the customs and export control laws and regulations of the U S and may also be subject to the customs and export laws and regulations of the country in which the products are manufactured or received Further under U S law such goods may not be sold leased or otherwise transferred to restricted countries or used by a restricted end user or an end user engaged in activities related to weapons of mass destruction including without limitation activities related to designing developing producing or using nuclear weapons materials or facilities missiles or Supporting missile projects or chemical or biological weapons You acknowledge you are not a restricted end user or involved in any of the restricted activities above and that you will comply with and abide by these laws and regulations Seagate reserves the right to refuse service to or the return of any storage devices that have been determined to violate these regulations Cancellation You may cancel the Program at any time by contacting SRS at 1 800 SEAGATE 1 800 475 0143 in the US or at such other number available at http services seagate com contact aspx or you simply may refrain from subm
12. 3 Default logical geometry Cylinders 16 383 Read write heads 16 Sectors per track 63 LBA mode When addressing these drives in LBA mode all blocks sectors are consecutively numbered from 0 to n 7 where n is the number of guaranteed sectors as defined above 2 4 Recording and interface technology Drive Specifications Interface SATA Recording method TGMR Recording density 1941 Track density ktracks inch avg 340 Areal density Gb in 642 Internal data transfer rate Mb s max 2347 Maximum sustained data transfer rate OD read MB s 216 Average data rate read write MB s 154 I O data transfer rate MB s max 600 2 5 Physical characteristics Maximum height 26 11mm 1 028 in Maximum width 101 6mm 4 0 in 0 010 in Maximum length 146 99mm 5 787 in Typical weight Seagate Enterprise NAS SRS HDD Product Manual Rev 6TB 780g 1 72 Ib 5TB 700g 1 54 Ib 4TB 620g 1 372 Ib 3TB 2TB 540g 1 19 Ib Cache buffer 128MB www seagate com Drive Specifications 2 6 Seek time Seek measurements are taken with nominal power at 25 C ambient temperature All times are measured using drive diagnostics The specifications in the table below are defined as follows e Track to track seek time is an average of all possible single track seeks in both directions e Average seek time is a true statistic
13. HDD Product Manual Rev A 6 Table 1 Drive specifications summary Drive Specification 5 6000 0011 5 5000 0011 5 4000 0011 5 3000 0011 5 2000 0011 37 7 C max operating Wet bulb temperature max 40 0 C max nonoperating 304 to 3048m Altitude operating 1000 ft to 10 000 ft Altitude non operating 304 to12 192m below mean sea level max 1000ft to 40 000 ft 70 Gs at 2ms read Operational shock max 40 Gs at 2ms write Non operational shock max 300 Gs at 2ms 2Hz to 22Hz 0 25 Gs Limited displacement Vibration operating 22Hz to 350Hz 0 50 Gs 350Hz to 500 2 0 25 Gs 5Hz to 22Hz 3 0 Gs Vibration non operating 22Hz to 350 2 3 0 e 350Hz to 500Hz 3 0 Gs Drive acoustics sound power Idle 2 5 bels typical 2 6 bels max 2 6 bels typical Seek 2 7 bels max Non recoverable read errors 1 per 1015 pits read Mean Time Between Failure MTBF 1 000 000 hrs To determine the warranty for a specific drive use a web browser to access the following web page http www seagate com support warranty and replacements Warranty From this page click on Check to see if the drive is under Warranty Users will be asked to provide the drive serial number model number or part number and country of purchase The system will display the warranty information for the drive ee Bove rel humidity 600 000 at 25 C 50 rel
14. Thinner and more flexible cabling for improved enclosure airflow and ease of installation e Scalability to higher performance levels In addition SATA makes the transition from parallel ATA easy by providing legacy software support SATA was designed to allow users to install a SATA host adapter and SATA disk drive in the current system and expect all of the existing applications to work as normal The SATA interface connects each disk drive in a point to point configuration with the SATA host adapter There is no master slave relationship with SATA devices like there is with parallel ATA If two drives are attached on one SATA host adapter the host operating system views the two devices as if they were both masters on two separate ports This essentially means both drives behave as if they are Device 0 master devices The SATA host adapter and drive share the function of emulating parallel ATA device behavior to provide backward compatibility with existing host systems and software The Command and Control Block registers PIO and DMA data transfers resets and interrupts are all emulated The SATA host adapter contains a set of registers that shadow the contents of the traditional device registers referred to as the Shadow Register Block All SATA devices behave like Device 0 devices For additional information about how SATA emulates parallel ATA refer to the Serial ATA International Organization Serial ATA Revision 3 0 The speci
15. attributes that are susceptible to degradation over time If self monitoring determines that a failure is likely 5 makes a status report available to the host Not all failures are predictable S M A R T predictability is limited to the attributes the drive can monitor For more information on S M A R T commands and implementation see the Draft ATA 5 Standard SeaTools diagnostic software activates a built in drive self test DST S M A R T command for D44 that eliminates unnecessary drive returns The diagnostic software ships with all new drives and is also available at http seatools seagate com This drive is shipped with S M A R T features disabled Users must have a recent BIOS or software package that supports S M A R T to enable this feature The table below shows the S M A R T command codes that the drive uses Table 11 S M A R T commands Code in features register S M A R T command S M A R T Read Data D24 S M A R T Enable Disable Attribute Autosave D34 S M A R T Save Attribute Values S M A R T Execute Off line Immediate runs DST D54 S M A R T Read Log Sector S M A R T Write Log Sector D84 S M A R T Enable Operations D94 S M A R T Disable Operations S M A R T Return Status If an appropriate code is not written to the Features Register the command is aborted and 0x04 abort is written to the Error register Seagat
16. mechanical and interface specifications for the following Seagate Enterprise NAS SRS HDD model drives SRS models 5 6000 0011 5 5000 0011 ST4000VN0011 ST3000VNO011 ST2000VNO0011 These drives provide the following key features Off the shelf compatibility Rated for 1M hours MTBF 24x7 capability Performance tuned for RAID applications Balance technology to support multiple drives in a system Quiet acoustic performance Low activity and idle power Supports ATA8 streaming commands TGMR recording technology provides the drives with increased areal density State of the art cache and on the fly error correction algorithms Native Command Queuing with command ordering to increase performance in demanding applications Full track multiple sector transfer capability without local processor intervention Compliant with RoHS requirements in China and Europe SeaTools diagnostic software performs a drive self test that eliminates unnecessary drive returns Support for S M A R T drive monitoring and reporting Supports latching SATA cables and connectors Worldwide Name WWN capability uniquely identifies the drive 1 1 About the SATA interface The Serial ATA SATA interface provides several advantages over the traditional parallel ATA interface The primary advantages include ied installation and configuration with true plug and play connectivity It is not necessary to set any jumpers or other configuration options
17. operating speed Read write power and current Read write power is measured with the heads on track based on a 16 sector write followed by a 32 ms delay then a 16 sector read followed by a 32 ms delay Operating power and current Operating power is measured using 40 percent random seeks 40 percent read write mode 1 write for each 10 reads and 20 per cent drive idle mode Idle mode power Idle mode power is measured with the drive up to speed with servo electronics active and with the heads in a random track loca tion Standby mode During Standby mode the drive accepts commands but the drive is not spinning and the servo and read write electronics are in power down mode Seagate Enterprise NAS SRS HDD Product Manual Rev 9 www seagate com Table 2 DC power requirements Drive Specifications Power dissipation 6 5TB models Avg 25 C Avg 5V typ Avg 12V typ Spinup lt 1 8 Idle T 7 20W 0 20A 0 52A Operating 9 00W 0 24A 0 65A Standby 0 60W 0 12A 0 01A Sleep 0 60W 0 12A 0 01A Table 3 DC power requirements Power dissipation 4 3TB models Avg 25 Avg 5V typ Avg 12V typ Spinup lt 1 8 Idle 1 5 90W 0 30A 0 36A Operating 6 70W 0 357A 0 41A Standby 0 60W 0 12A 0 01A Sleep 0 60W 0 12A 0 01A Table 4 DC power requirements Power dissipation 2TB models Avg 25 Avg 5V typ Avg 12V typ Spinup lt 1 8 Idle
18. stop cycles per year Operations at nominal voltages Temperatures outside the specifications in page 11 may reduce the product reliability Operation at excessive I O duty cycle may degrade product reliability The NAS environment of power on hours temperature and I O duty cycle affect the product MTBF The MTBF will be degraded if used in an enterprise application Seagate Enterprise NAS SRS HDD Product Manual Rev 13 www seagate com Drive Specifications 2 13 Seagate Rescue Data Recovery Service 3 year coverage concurrent with bare drive warranty If you suffer a data loss event within the three year Seagate Rescue Data Recovery warranty period and you are eligible to participate in and submit a case under the Rescue program contact SRS at 1 800 723 1183 in the US or if you are please visit our website for numbers in your local language http www seagate com contacts contact numbers In addition you may visit http rescueandreplace seagate com contact jsp to obtain information regarding how to contact a recovery expert online or by telephone from your location An SRS representative will review your case to confirm your eligibility and to assess whether your data may be recoverable by remote recovery services or whether you will need to send your device to SRS for in lab servicing Rescue General Terms These Rescue General Terms together with the Rescue FAQ s make up the Rescue Program Te
19. C Tick marking they comply with the Australia New Zealand Standard AS NZ CISPR22 and meet the Electromagnetic Compatibility EMC Framework requirements of the Australian Communication Authority ACA 2 14 3 FCC verification These drives are intended to be contained solely within a personal computer or similar enclosure not attached as an external device As such each drive is considered to be a subassembly even when it is individually marketed to the customer As a subassembly no Federal Communications Commission verification or certification of the device is required Seagate has tested this device in enclosures as described above to ensure that the total assembly enclosure disk drive motherboard power supply etc does comply with the limits for a Class B computing device pursuant to Subpart J Part 15 of the FCC rules Operation with non certified assemblies is likely to result in interference to radio and television reception Radio and television interference This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturer s instructions may cause interference to radio and television reception This equipment is designed to provide reasonable protection against such interference in a residential installation However there is no guarantee that interference will not occur in a particular installation If this equipment does cause interference to radio or television whi
20. RM INTENTIONALLY WITHOUT LIMITING THE GENERALITY OF THE FOREGOING WE WILL NOT BE LIABLE FOR THE CONDITION EXISTENCE OR LOSS OF THE DATA YOU SEND US OR THE DATA WE RECOVER IF ANY ANY LOSS OF REVENUE OR LOSS OF PROFITS OR ANY INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES HOWEVER CAUSED TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW THIS LIMITATION SHALL APPLY TO ANY AND ALL DAMAGES REGARDLESS OF THE LEGAL THEORY ON WHICH THEY ARE ASSERTED INCLUDING WITHOUT LIMITATION CONTRACT BREACH OF CONTRACT AND TORT AND REGARDLESS OF WHETHER WE HAVE BEEN ADVISED OF THE POSSIBILITY OF LOSS OR DAMAGES UNLESS YOU PROVE THAT SRS CAUSED DAMAGES TO YOU INTENTIONALLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW THE AMOUNT OF OUR LIABILITY WILL NOT EXCEED THE TOTAL PRICE YOU ACTUALLY PAY FOR THE DEVICE THE ESSENTIAL PURPOSE OF WHICH IS TO LIMIT OUR LIABILITY ARISING FROM OR RELATED TO THE PROGRAM AND ANY DATA RECOVERY SERVICES THIS ALLOCATION OF RISK IS REFLECTED IN THE PRICE CHARGED FOR THIS PROGRAM OR SERVICES IF ANY YOU ACKNOWLEDGE THAT THE PRICE OF THIS PROGRAM WOULD BE MUCH GREATER IF WE UNDERTOOK MORE EXTENSIVE LIABILITY THIS PARAGRAPH WILL APPLY NOTWITHSTANDING ANY OTHER PROVISIONS IN THESE TERMS OR THE FAILURE OF ANY REMEDY Seagate Enterprise NAS SRS HDD Product Manual Rev A 14 www seagate com Drive Specifications Compliance with Laws You agree to comply with all such laws and regulations and all other applicable laws
21. al random average of at least 5000 measurements of seeks between random tracks less overhead Typical seek times ms Read Write Track to track 1 0 1 2 Average 8 5 9 5 Average latency 4 0 These drives are designed to consistently meet the seek times represented in this manual Physical seeks regardless of mode such as track to track and average are expected to meet the noted values However due to the manner in which these drives are formatted benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications 2 7 Start stop times The start stop times listed below Power on to ready 15 typical in seconds 26 max Standby to ready 15 typical in seconds 20 max Ready to spindle stop 10 typical in seconds 11 max Time to ready may be longer than normal if the drive power is removed without going through normal OS powerdown procedures 2 8 Power specifications The drive receives DC power 5V or 12V through a native SATA power connector Refer to Figure 1 on page 18 2 8 1 Power consumption Power requirements for the drives are listed in Table 2 Typical power measurements are based on an average of drives tested under nominal conditions using 5 0V and 12 0V input voltage at 25 C ambient temperature Spinup power Spinup power is measured from the time of power on to the time that the drive spindle reaches
22. ch can be determined by turning the equipment on and off users are encouraged to try one or more of the following corrective measures Reorient the receiving antenna Move the device to one side or the other of the radio or TV Move the device farther away from the radio or TV Plug the computer into a different outlet so that the receiver and computer are on different branch outlets If necessary users should consult the dealer or an experienced radio television technician for additional suggestions Users may find helpful the following booklet prepared by the Federal Communications Commission How to Identify and Resolve Radio Television Interference Problems This booklet is available from the Superintendent of Documents U S Government Printing Office Washington DC 20402 Refer to publication number 004 000 00345 4 Seagate Enterprise NAS SRS HDD Product Manual Rev 16 2 15 Environmental protection Seagate designs its products to meet environmental protection requirements worldwide including regulations restricting certain chemical substances 2 15 1 European Union Restriction of Hazardous Substances RoHS Directive The European Union Restriction of Hazardous Substances RoHS Directive restricts the presence of chemical substances including Lead Cadmium Mercury Hexavalent Chromium PBB and PBDE in electronic products effective July 2006 This drive is manufactured with components and materials that comply with th
23. cifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws Shock may be applied in the X Y or Z axis 2 9 5 1 Operating shock These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 70 Gs based on half sine shock pulses of 2ms during read operations Shocks should not be repeated more than two times per second 2 9 5 2 Non operating shock The non operating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 300 Gs based on a non repetitive half sine shock pulse of 2ms duration 2 9 5 3 Operating vibration The maximum vibration levels that the drive may experience while meeting the performance standards specified in this document are specified below 2Hz to 22Hz 0 25 Gs Limited displacement 22Hz to 350Hz 0 50 Gs 350Hz to 500Hz 0 25 Gs All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws Vibration may be applied in the X Y or Z axis Throughput may vary if improperly mounted 2 9 6 Non operating vibration The maximum non operating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below 5Hz to 22Hz 3 0 Gs Limited displacemen
24. e Enterprise NAS SRS HDD Product Manual Rev A 27 SEAGATE Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard Cupertino California 95014 United States 408 658 1000 ASIA PACIFIC Seagate Singapore International Headquarters Pte Ltd 7000 Ang Mo Kio Avenue 5 Singapore 569877 65 6485 3888 EUROPE MIDDLE EAST AND AFRICA Seagate Technology SAS 16 18 rue du D me 92100 Boulogne Billancourt France 33 1 4186 10 00 Publication Number 100771866 Rev A January 2015
25. e RoHS Directive 2 15 2 China Restriction of Hazardous Substances RoHS Directive 38 4 This product has an Environmental Protection Use Period EPUP of 20 years The following table contains information mandated by China s Marking Requirements for Control of Pollution Caused by Electronic Information Products 6m Standard 12 mR ADER RP FREST PR HARS sk HEERES Toxic or Hazardous Substances or Elements sti Sh Matiz Hexavalent Polybrominated Polybrominated Diphenyl Diphenyl Ether Atita ERRE LR AH CrB PBDE O indicates the hazardous and toxic substance content of the part at the homogeneous material level is lower than the threshold defined by the China RoHS Standard O RRA FARMER ME eke Ae RTF BRoHS MCV brite Fite X indicates the hazardous and toxic substance content of the part at the homogeneous material level is over the threshold defined by the China RoHS MCV Standard CX RAITT FRR LE eA eS E h P BIRoHS MCV faite FE 2 16 Corrosive environment Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to light industrial environments containing sulfurous gases chlorine and nitric oxide classes G and H per ASTM B845 However this accelerated testing cannot duplicate every potential application environment Users should use caution exposing any electronic componen
26. e SATA interface cable consists of four conductors in two differential pairs plus three ground connections The cable size may be 30 to 26 AWG with a maximum length of one meter 39 37 inches See Table 7 for connector pin definitions Either end of the SATA signal cable can be attached to the drive or host For direct backplane connection the drive connectors are inserted directly into the host receptacle The drive and the host receptacle incorporate features that enable the direct connection to be hot pluggable and blind mateable For installations which require cables users can connect the drive as illustrated in Figure 1 Figure 1 Attaching SATA cabling connector NN Power connector Power cable Each cable is keyed to ensure correct orientation Enterprise NAS SRS HDD v2 drives support latching SATA connectors 3 4 Drive mounting Users can mount the drive in any orientation using four screws in the side mounting holes or four screws in the bottom mounting holes Refer to Figure 2 for drive mounting dimensions Follow these important mounting precautions when mounting the drive Allow a minimum clearance of 0 030 inches 0 76mm around the entire perimeter of the drive for cooling Use only 6 32 UNC mounting screws The screws should be inserted no more than 0 150 inch 3 81mm into the bottom or side mounting holes Do not overtighten the mounting screws maximum torque 6 inch Ib Seagate Enterprise NAS SRS HDD Pr
27. ent mode see note following this table XX7Fy 89 Security erase time 0039 90 Enhanced security erase time 0039 92 Master password revision code FFFE 93 Hardware reset value XXXXy 94 Automatic acoustic management 8080 95 99 ATA reserved 0000H Total number of user addressable LBA sectors available see Section 2 522 S5 T 100 103 2 2 for related information These words are required for drives that ST4000VNO011 781 4 037 168 support the 48 bit addressing feature Maximum value ST3000VN0011 5 860 533 168 0000FFFFFFFFFFFFR opes ST2000VN0011 3 907 029 168 104 107 ATA reserved 0000 1 111 NOTE This fold is valic WWN support 112 127 ATA reserved 00004 128 Security status 0001 129 159 Seagate reserved 160 254 ATA reserved 00004 255 Integrity word XxA5y 24 www seagate com SATA Interface Description if bit is set to 1 Bit 0 10 Bit 9 10 11 12 13 15 Bit 99 Word 63 Multiword DMA mode 0 is supported Multiword DMA mode 1 is supported Multiword DMA mode 2 is supported Multiword DMA mode 0 is currently active Multiword DMA mode 1 is currently active Multiword DMA mode 2 is currently active Word 84 SMART error login is supported SMART self test is supported Media serial number is supported Media Card Pass Through Command feature set is supported Streaming feature set is supported GPL feature set is s
28. fication can be downloaded from www sata io org The host adapter may optionally emulate a master slave environment to host software where two devices on separate SATA ports are represented to host software as a Device 0 master and Device 1 slave accessed at the same set of host bus addresses A host adapter that emulates a master slave environment manages two sets of shadow registers This is not a typical SATA environment Seagate Enterprise NAS SRS HDD Product Manual Rev 5 www seagate com Drive Specifications 2 0 Drive Specifications Unless otherwise noted all specifications are measured under ambient conditions at 25 and nominal power For convenience the phrases the drive and this drive are used throughout this manual to indicate the following drive models SRS models 5 6000 0011 5 5000 0011 ST4000VNOO11 ST3000VNO011 ST2000VNO0011 2 1 Specification summary tables The specifications listed in Table 1 are for quick reference For details on specification measurement or definition refer to the appropriate section of this manual Table 1 Drive specifications summary Drive Specification 5 6000 0011 5 5000 0011 5 4000 0011 5 3000 0011 5 2000 0011 Formatted capacity 512 bytes sector 6000GB 6TB 5000GB 5TB 4000GB 4TB 3000GB 3TB 2000GB 2TB Guaranteed sector
29. itting a request for Rescue services These Program Terms remain applicable to your and SRS s rights obligations with respect to any services requested by you under this Program Assignment You may not assign your rights or obligations under these Program Terms without SRS express written consent Dispute Resolution The parties will attempt to resolve any dispute arising out of or related to these Program Terms or any data recovery services requested or attempted hereunder through good faith negotiation To the extent permitted by applicable law if the parties are unable to resolve the dispute through good faith negotiation then the dispute will be submitted to final and binding arbitration with the Judicial Arbitration and Mediation Services Each party will bear its own costs in arbitration provided that Seagate reserves the right in its discretion to pre pay certain fees you may incur in connection with the arbitration subject to refund if you do not prevail Both parties waive their rights to a jury trial All proceedings will take place in Santa Clara County California USA The laws of the State of California will exclusively govern these Program Terms and our provision of any data recovery services without regard to California s conflicts of laws rules You consent to the exclusive jurisdiction of the courts located in Santa Clara County California USA Severability If any provision of these Program Terms is held invalid illegal
30. lugged into a grounded outlet Wear a grounded wrist strap throughout the entire installation procedure Handle the drive by its edges or frame only The drive is extremely fragile handle it with care Do not press down on the drive top cover Always rest the drive a padded antistatic surface until mounting it in the computer Do not touch the connector pins or the printed circuit board Do not remove the factory installed labels from the drive or cover them with additional labels Removal voids the warranty Some factory installed labels contain information needed to service the drive Other labels are used to seal out dirt and contamination 3 2 Configuring the drive Each drive on the SATA interface connects point to point with the SATA host adapter There is no master slave relationship because each drive is considered a master in a point to point relationship If two drives are attached on one SATA host adapter the host operating system views the two devices as if they were both masters on two separate ports Both drives behave as if they are Device 0 master devices SATA drives are designed for easy installation It is usually not necessary to set any jumpers on the drive for proper operation however if users connect the drive and receive a drive not detected error the SATA equipped motherboard or host adapter may use a chipset that does not support SATA speed autonegotiation 3 3 SATA cables and connectors Th
31. munity When properly installed in a representative host system the drive operates without errors or degradation in performance when subjected to the radio frequency RF environments defined in Table 6 Table 6 Radio frequency environments Performance Reference Test Description level standard Electrostatic discharge Contact HCP VCP 4 kV Air 8 kV B EN61000 4 2 95 Radiated RF immunity 80MHz to 1 000MHz V m A EN61000 4 3 96 8096 AM with 1kHz sine ENV50204 95 900MHz V m 50 pulse modulation 200Hz Electrical fast transient 1 on AC mains 0 5 kV on external I O EN61000 4 4 95 Surge immunity 1 kV differential 2 common EN61000 4 5 95 AC mains Conducted RF immunity 150kHz to 80 2 Vrms 80 AM with 1kHz EN61000 4 6 97 sine Voltage dips interrupts 0 open 5 seconds EN61000 4 11 94 096 short 5 seconds 4096 0 10 seconds 70 0 01 seconds 2 12 MTBF and Warranty The product will achieve a Mean Time Between Failure Rate MTBF of 1 000 000 hours when operated in an environment of ambient air temperatures of 25 Operation at temperatures outside the specifications shown in Section 2 9 Environmental specifications may increase the product MTBF MTBF is a population statistic that is not relevant to individual units MTBF specifications are based on the following assumptions for NAS environments 8760 power on hours per year 10 000 average motor start
32. oduct Manual Rev 18 Figure 2 Mounting dimensions 2 3 4 amp 5TB models 5 787 max 146 99 mm 4 010 in 101 85 1 140 050 28 96 1 27 4 00 101 60 1 638 41 61 1 22 020 30 99 51 3X 6 32 UNC 2B 3 MIN THREAD DEPTH 0 15 MAX FASTENER PENETRATION MOUNTING HOLES BOTH SIDES Figure 3 Mounting dimensions 6TB model 4X 6 32 UNC 2B 3 MIN THREAD DEPTH 15 MAX FASTENER PENETRATION MOUNTING HOLE MAX TORQUE 6 IN LBS 2X 3 000 010 2X 1 625 020 1 432 019 2 OF DRIVE OF CONN 814 020 2 3 750 010 4 000 010 1 028 MAX 26 11 MM 142 015 2 1 OF DRIVE Seagate Enterprise NAS SRS HDD Product Manual Rev A TYP Temperature Check Point 7 TOP OF LABEL 0 680 050 17 27 1 27 mm 1 028 in max 26 11 mm 0 250 010 in 6 35 25 BOTH SIDES 0 138 in 3 51 mm OF CONNECTOR DATUM B T 0 814 in 20 68 mm ah OF DRIVE 2X 4 000 010 2X 1 122 020 5 787 MAX 146 99 lt lt 2X 6 32 UNC 2B 3 MIN THREAD DEPTH 15 MAX FASTENER PENETRATION MOUNTING HOLES BOTH SIDES MAX TORQUE 6 IN LBS www seagate com SATA Interface 4 0 SATA Interface
33. ompatibility Directive 2004 108 EC as put into place 20 July 2007 Testing is performed to the levels specified by the product standards for Information Technology Equipment ITE Emission levels are defined by EN 55022 Class B and the immunity levels are defined by EN 55024 Drives are tested in representative end user systems Although CE marked Seagate drives comply with the directives when used in the test systems we cannot guarantee that all systems will comply with the directives The drive is designed for operation inside a properly designed enclosure with properly shielded cable if necessary and terminators on all unused I O ports Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products Korean RRL If these drives have the Korean Communications Commission KCC logo they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility EMC Framework requirements of the Radio Research Laboratory RRL Communications Commission Republic of Korea These drives have been tested and comply with the Electromagnetic Interference Electromagnetic Susceptibility EMI EMS for Class B products Drives are tested in a representative end user system by a Korean recognized lab Family name Enterprise NAS SRS HDD v2 Certificate number In process Australian C Tick N176 If these models have the
34. or unenforceable such provision shall be enforced to the fullest extent permitted by applicable law and the validity legality and enforceability of the remaining provisions shall not be affected thereby Legal Effect These Program Terms describe certain legal rights You may have other rights under applicable law These Program Terms do not change your rights under applicable law if such laws do not permit these Program Terms to do So Also the Program and these Program Terms are in addition and unrelated to any rights you may have under a Seagate warranty statement SRS Companies The following SRS companies may provide the services described in these Program Terms a Seagate Technology LLC with offices at 3101 Jay Street Suite 110 Santa Clara California 95054 b Seagate Technology Canada Inc with offices at 2421 Bristol Circle Suite A100 Oakville Ontario Canada L6H 5S9 and or c Seagate Technology Netherlands B V with offices at Koolhovenlaan 1 1119 PA Schiphol Rijk The Netherlands Seagate Enterprise NAS SRS HDD Product Manual Rev 15 www seagate com Drive Specifications 2 14 Agency certification 2 14 1 Safety certification These products are certified to meet the requirements of UL60950 1 CSA60950 1 and EN60950 and so marked as to the certify agency 2 14 2 Electromagnetic compatibility Hard drives that display the CE mark comply with the European Union EU requirements specified in the Electromagnetic C
35. ort the 48 bit addressing feature 62 Retired 00001 Multiword DMA active and modes supported 63 see note following this table 64 Advanced modes supported modes 3 4 supported 0003 Seagate Enterprise NAS SRS HDD Product Manual Rev A 23 www seagate com Table 9 Identify Device commands continued SATA Interface Advanced Power Management APM and Automatic Acoustic Management AAM features are not supported See the bit descriptions below for words 63 84 and 88 of the Identify Drive data Seagate Enterprise NAS SRS HDD Product Manual Rev A Word Description Value 65 Minimum multiword DMA transfer cycle time per word 120 nsec 0078 66 Goong multiword DMA transfer cycle time per word 0078 67 Minimum PIO cycle time without IORDY flow control 240 nsec 0078 68 Minimum PIO cycle time with IORDY flow control 120 nsec 00784 69 74 ATA reserved 00004 75 Queue depth 001Fy 76 SATA capabilities XXXXY 77 Reserved for future SATA definition XXXXH 78 SATA features supported XXXXH 79 SATA features enabled XXXXH 80 Major version number 01 0 81 Minor version number 00284 82 Command sets supported 364By 83 Command sets supported 7 09 84 see nole following this table 4163 85 Command sets enabled 0 86 Command sets enabled BE09y 87 Command sets enable extension 4163 88 Ultra DMA support and curr
36. ous factors including file size file format features and application software Actual data rates may vary depending on operating environment and other factors The export or re export of hardware or software containing encryption may be regulated by the U S Department of Commerce Bureau of Industry and Security for more information visit www bis doc gov and controlled for import and use outside of the U S Seagate reserves the right to change without notice product offerings or specifications Contents Seagate Technology Support Services 4 1 0 niger PR TT 5 1 1 About the SATA interface e Re ass 5 2 0 Drive 5 454444 lt rr 6 2 1 Specification summary tables 6 2 2 Forimatted Capacltyy 223m eade atado os UR spei eor 7 2 2 1 LBA mod6e n dU RR ep Sena 8 2 3 Default logical geometry 1 8 2 4 Recording and interface technology 8 2 5 Physical characteristlGS 2 22 e dede dace E ROD e dod 8 2 6 CCP as 9 2 7 Start stop MeS ss oeskx Reds
37. r of logical cylinders 16 383 2 ATA reserved 00004 3 Number of logical heads 16 4 Retired 0000 5 Retired 0000 6 Number of logical sectors per logical track 63 003Fy 7 9 Retired 0000H 10 19 Serial number 20 ASCII characters 00004 none ASCII 20 Retired 0000H 21 Retired 04004 22 Obsolete 0000H Firmware revision 23 26 8 ASCII character string padded with blanks to end of string nee 27 46 Drive model number 40 ASCII characters padded with blanks to end of string Bits 7 0 Maximum sectors per interrupt on Read multiple and Write ar multiple 16 80104 48 Reserved 00004 49 Standard Standby timer IORDY supported and may be disabled 2 00 50 ATA reserved 0000 51 PIO data transfer cycle timing mode 02004 52 Retired 02004 53 Words 54 58 64 70 and 88 are valid 00074 54 Number of current logical cylinders XXXXy 55 Number of current logical heads XXXXy 56 Number of current logical sectors per logical track XXXXy 57 58 Current capacity in sectors XXXXy Number of sectors transferred during a Read Multiple 59 or Write Multiple command Total number of user addressable LBA sectors available see Section 2 2 for related information Note The maximum value allowed in this field is OFFFFFFFh 60 61 268 435 455 sectors 137GB Drives with capacities over 137GB will OFFFFFFFh have OFFFFFFFh in this field and the actual number of user addressable LBAs specified in words 100 103 This is required for drives that supp
38. rms By submitting a case under the Rescue program Program you agree to be bound by the Program Terms including these General Terms and the FAQ You must be a legal resident of the US to participate in the Program Communications All communications relating to your request will be available on our web site in your account and sent via e mail to the address you provide to us unless you request in writing to receive such communications via regular mail Personal Data You must provide true accurate and complete information about yourself as prompted by the request form including without limitation your name address e mail address and telephone number as applicable collectively Personal Data You must maintain and promptly update your Personal Data You acknowledge that we may send you important information and notices regarding your requests by e mail and that we shall have no liability associated with or arising from your failure to maintain accurate Personal Data Capacity Legal Rights Indemnity You represent to SRS that you are of the legal age of majority in your state or country of residence with the full capacity to agree to these Program Terms You warrant that you are the legal owner or the authorized representative of the legal owner of the device you submit to SRS the Device and data You warrant that the data on the Device is legal and that you have the unrestricted legal right to a give us remote acce
39. s 11 721 045 168 9 767 541 168 7 814 037 168 5 860 533 168 3 907 029 168 Heads 12 10 8 4 Disks 6 5 4 2 Bytes per sector 4096 4K physical emulated at 512 byte sectors Default sectors per track 63 Default read write heads 16 Default cylinders 16 383 Recording density max 1941 Track density avg 340ktracks in Areal density avg 642Gb in Internal data transfer rate max 2347Mb s Average data rate read write MB s 154MB s Bie sustained data rate OD read 216MB s PIO modes 0 to 4 ATA data transfer modes supported Multiword DMA modes 0 to 2 Ultra DMA modes 0 to 6 data transfer rate max 600MB s Cache buffer 128MB Height max 26 1mm 1 028 Width max 101 6mm 4 0 in 0 010 in Length max 146 99mm 5 787 in Weight typical 780g 1 72 lb 700g 1 54 Ib 620g 1 37 Ib 540g 1 19 Ib Average latency 4 0ms Power on to ready max 26 0s Standby to ready max 20 0s Average seek read typical 8 5ms typical Average seek write typical 9 5ms typical Startup current typical 12V lt 1 8 Voltage tolerance including noise 12V sooo gt Ambient temperature 0 to 70 C operating drive case temperature 40 to 70 C non operating 20 C per hour max operating Temperature gradient 30 C per hour max nonoperating 5 to 90 operating Relative humidity 5 to 95 nonoperating Relative humidity gradient max 30 per hour Seagate Enterprise NAS SRS
40. ss to the data b have the data recovered and reproduced on a backup medium c receive the recovered data and d agree to these Program Terms You will defend and indemnify us including our directors officers employees agents delegates and contractors from any claims or actions relating to the Device or data or your rights or lack of rights thereto Confidentiality We will protect the confidentiality of your data against unauthorized disclosure using the same degree of care as we use to protect our own confidential information Disclaimer of Warranties Representations and Guarantees WE PROVIDE THE PROGRAM AND ANY SERVICES PROVIDED OR ATTEMPTED HEREUNDER AS IS WITH ALL FAULTS AT YOUR SOLE RISK WE DO NOT EXTEND ANY EXPRESS WARRANTIES REPRESENTATIONS CONDITIONS OR GUARANTEES REGARDING OUR RESCUE SERVICES OR ANY RESULTS THEREOF TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW AND SUBJECT TO ANY STATUTORY WARRANTIES THAT CANNOT BE EXCLUDED WE EXPRESSLY DISCLAIM ALL IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR WARRANTY OF ACCURACY OR COMPLETENESS WITH RESPECT TO THIS PROGRAM AND SERVICES This Program and Disclaimer is unrelated to and does not affect any warranties relating to your Device that we or the seller may have extended to you Limitation of Liability WE WILL NOT BE LIABLE FOR ANY HARM CAUSED UNLESS YOU PROVE THAT WE CAUSED SUCH HA
41. t 22Hz to 350Hz 3 0 Gs 3 0 Gs 350Hz to 500Hz Seagate Enterprise NAS SRS HDD Product Manual Rev A 12 www seagate com Drive Specifications 2 10 Acoustics Drive acoustics are measured as overall A weighted acoustic sound power levels no pure tones All measurements are consistent with ISO document 7779 Sound power measurements are taken under essentially free field conditions over a reflecting plane For all tests the drive is oriented with the cover facing upward For seek mode tests the drive is placed in seek mode only The number of seeks per second is defined by the following equation Number of seeks per second 0 4 average latency average access time Table 5 Fluid Dynamic Bearing FDB motor acoustics Idle Seek 2 5 bels typical 2 6 bels typical 2 6 bels max 2 7 bels max During periods of drive idle some offline activity may occur according to the S M A R T specification which may increase acoustic and power to operational levels 2 10 1 Test for Prominent Discrete Tones PDTs Seagate follows the ECMA 74 standards for measurement and identification of PDTs An exception to this process is the use of the absolute threshold of hearing Seagate uses this threshold curve originated in ISO 389 7 to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA 74 standards 2 11 Electromagnetic im
42. ter are defined as follows Table 10 Set Features command 02y Enable write cache default 034 Set transfer mode based on value in Sector Count register Sector Count register values 004 Set PIO mode to default PIO mode 2 014 Set PIO mode to default and disable IORDY PIO mode 2 08 PIO mode 0 094 PIO mode 1 PIO mode 2 OB PIO mode PIO mode 4 default 20 Multiword DMA mode 0 21 Multiword DMA mode 1 224 Multiword DMA mode 2 404 Ultra DMA mode 0 414 Ultra DMA mode 1 424 Ultra DMA mode 2 434 Ultra DMA mode 444 Ultra DMA mode 4 45 Ultra DMA mode 5 46 Ultra DMA mode 6 064 Enable the PUIS feature set 074 PUIS feature set device spin up 104 Enable use of SATA features 554 Disable read look ahead read cache feature 824 Disable write cache 86H Disable the PUIS feature set 904 Disable use of SATA features AAy Enable read look ahead read cache feature default Report full capacity available Noe At power on or after a hardware or software reset the default values of the features are as indicated above Seagate Enterprise NAS SRS HDD Product Manual Rev 26 www seagate com SATA Interface 4 3 3 S M A R T commands S M A R T provides near term failure prediction for disk drives When S M A R T is enabled the drive monitors predetermined drive
43. ting Enabled Idle Tracking Rotating Enabled Standby Parked Stopped Enabled Sleep Parked Stopped Disabled Active mode The drive is in Active mode during the read write and seek operations Idle mode The buffer remains enabled and the drive accepts all commands and returns to Active mode any time disk access is necessary Standby mode The drive enters Standby mode when the host sends a Standby Immediate command If the host has set the standby timer the drive can also enter Standby mode automatically after the drive has been inactive for a specifiable length of time The standby timer delay is established using a Standby or Idle command In Standby mode the drive buffer is enabled the heads are parked and the spindle is at rest The drive accepts all commands and returns to Active mode any time disk access is necessary Sleep mode The drive enters Sleep mode after receiving a Sleep command from the host In Sleep mode the drive buffer is disabled the heads are parked and the spindle is at rest The drive leaves Sleep mode after it receives a Hard Reset or Soft Reset from the host After receiving a reset the drive exits Sleep mode and enters Standby mode with all current translation parameters intact Idle and Standby timers Each time the drive performs an Active function read write or seek the standby timer is reinitialized and begins counting down from its specified delay times to zero If the standby timer reaches
44. ts to uncontrolled chemical pollutants and corrosive chemicals as electronic drive component reliability can be affected by the installation environment The silver copper nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide chloride and nitrate contaminants Sulfur is found to be the most damaging In addition electronic components should never be exposed to condensing water on the surface of the printed circuit board assembly PCBA or exposed to an ambient relative humidity greater than 95 Materials used in cabinet fabrication such as vulcanized rubber that can outgas corrosive compounds should be minimized or eliminated The useful life of any electronic equipment may be extended by replacing materials near circuitry with sulfide free alternatives Seagate Enterprise NAS SRS HDD Product Manual Rev A 17 www seagate com Configuring and Mounting the Drive 3 0 Configuring and Mounting the Drive This section contains the specifications and instructions for configuring and mounting the drive 31 Handling and static discharge precautions After unpacking and before installation the drive may be exposed to potential handling and electrostatic discharge ESD hazards Observe the following standard handling and static discharge precautions Caution Before handling the drive put on a grounded wrist strap or ground oneself frequently by touching the metal chassis of a computer that is p
45. upported WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT commands are supported WRITE DMA QUEUED FUA EXT command is supported 64 bit World Wide Name is supported Obsolete Reserved for TLC IDLE IMMEDIATE command with IUNLOAD feature is supported Shall be set to 1 Shall be cleared to 0 Word 88 0 Ultra mode 0 is supported 1 Ultra DMA mode 1 is supported 2 Ultra DMA mode 2 is supported 3 Ultra DMA mode 3 is supported 4 Ultra DMA mode 4 is supported 5 Ultra DMA mode 5 is supported 6 Ultra DMA mode 6 is supported 8 Ultra mode 0 is currently active Ultra DMA mode 1 is currently active 10 Ultra DMA mode 2 is currently active 11 Ultra DMA mode 3 is currently active 12 Ultra DMA mode 4 is currently active 13 Ultra DMA mode 5 is currently active 14 Ultra DMA mode 6 is currently active Seagate Enterprise NAS SRS HDD Product Manual Rev 25 www seagate com SATA Interface 4 3 2 Set Features command This command controls the implementation of various features that the drive supports When the drive receives this command it sets BSY checks the contents of the Features register clears BSY and generates an interrupt If the value in the register does not represent a feature that the drive supports the command is aborted Power on default has the read look ahead and write caching features enabled The acceptable values for the Features regis
46. zero before any drive activity is required the drive makes a tran sition to Standby mode In both Idle and Standby mode the drive accepts all commands and returns to Active mode when disk access is necessary 2 9 Environmental specifications This section provides the temperature humidity shock and vibration specifications for Desktop HDDs Ambient temperature is defined as the temperature of the environment immediately surrounding the drive Above 1000ft 305 meters the maximum temperature is derated linearly by 1 C every 1000 ft Refer to Section 3 4 on page 18 for base plate measurement location 2 9 1 Ambient Temperature drive case temperature Operating 0910 70 C 32 to 158 F Non operating 40 to 70 40 to 158 F 2 9 2 Temperature gradient Operating 20 per hour 68 per hour max without condensation Non operating 30 per hour 86 F per hour max Seagate Enterprise NAS SRS HDD Product Manual Rev 11 www seagate com Drive Specifications 2 9 3 Humidity 2 9 3 1 Relative humidity Operating 5 to 90 non condensing 30 per hour max Nonoperating 5 to 95 non condensing 30 per hour max 2 9 8 2 Wet bulb temperature Operating 37 7 99 9 F max 40 104 F max Non operating 2 9 4 Altitude Operating 304 to 3048m 1000 ft to 10 000 ft Non operating 304 to 12 192m 1000 ft to 40 000 ft 2 9 5 Shock All shock spe
Download Pdf Manuals
Related Search