Hisense LTDN50D36TUK 50" Full HD Black LED TV
Contents
1. 8 English 2 4 Using the Screen Menu Screen Horizontal Pos 50 Vertical Pos 50 Horizontal size 50 Vertical size 50 P Picture positioning and PC settings Horizontal Pos Adjusts the horizontal position of image Vertical Pos Adjusts the vertical position of image Horizontal size Adjusts the horizontal size of image Vertical size Adjusts the vertical size of image Z NOTE Depending on the input source or signal the Screen Menu items will vary English 9 2 5 Using the Option Menu Option English Deutsch Menu Language Audio Language Subtitle Language Deutsch OSD Timeout 30S Installation Guide Off Use Mode Home Mode HDMI_CEC Off TIME Security Blue Screen System settings Menu Language Select a preset Menu Language mode Audio Language Allows you to select your desired audio language Press the lt gt buttons to select the Primary Secondary Audio Language Press the Y button and then press the A V lt b buttons to select your desired audio language Subtitle Language Allows you to select your desired subtitle language Press the lt gt buttons to select the Primary Secondary subtitle language Press the W button and then press the A V lt gt buttons to select your desired subtitle language OSD Timeout Allows you to select the display time of the on screen menu Off 10S 15S 60S Install2. e Take care not to subject the surfaces to insect repellent solvent thinner or other volatile substances This may degrade the surface quality e Do not expose your ears to excessive volume from headphones Irreversible damage can be caused e The wrong power supply can cause damage to the TV This TV shall be operated only from the power source indicated on the marking label and only with the power cables supplied with the TV e Power supply cords shall be routed so that they are not likely to be walked on pinched or cut by items placed upon or against them Also the contact with chemicals should be avoided e Do not use a damaged power cord e A power cord with damaged isolation might result in electric shock and fire e Unplug the TV from power supply and from antenna only for aerial and satellite antennas during thunderstorms or longer periods of not using it to avoid damages e The main plug is used as the disconnect device which shall remain readily operable e The ventilation slots on the back of the TV have to remain free Please don t cover the TV don t place anything on it and don t attach any equipment to it that is not authorized by the manufacturer e There is a gap of at least 10cm on both sides and a gap of 20cm at the top to ensure proper ventilation No matter if the TV is placed in a cupboard or shelf or mounted to the wall 20cm 10cm 10cm 10cm 10cm 10cm 10cm 2 English Important Safety Inst
3. 1 Turn on your TV then press the SOURCE button on the remote the list of Source appears 2 Press the A F buttons to select the input source 3 Press the OK button to confirm your selection 1 3 Selecting the aspect ratio You can set various display modes which are shown as follows Pressing the SIZE button you can achieve 4 3 116 9 Zoom 1 Zoom 2 Smart Zoom Auto 1 1 There are two kinds of input signal One is 4 3 the other is 16 9 When you press the SIZE button he can get different picture in different format The recommended format for original 4 3 is 4 3 option or Auto and the preferable format for original 16 9 signal is 16 9 option or Auto SIZE Input Signal 4 3 Input Signal 16 9 This selection will allow This selection will allow you to view a picture with O O you to adjust the picture O O 4 3 an original 4 3 aspect ratio C horizontally in linear ad Black bars will appear on proportion Black bars will both the left and right of O O appear on both the left O O the screen and right of the screen This selection will allow you to adjust the picture O OJ This selection will allow O O 16 9 horizontally in linear C Sa e o iell C proportion to fill the entire O O g p O O screen ratio English 5 This selection will allow you to zoom in the picture without any alteration However the top and bottom of the picture will be cropped And it allow you to adjust
4. EXIT button to exit the menu BI NOTE The menus in the user manual may vary slightly from the actual screen Backlight 50 _ _e Noise Reduction Middle Colour Temperature Standard Auto Light off 2 2 Using the Picture Menu The picture setting allows the user to optimize the output quality picture of the TV Picture Picture Mode Standard Contrast Colour Sharpness Tint _ _ 5o _ _ _ 0 _ 0 _ Tr w Brightness 50 a Adjust the picture settings Backlight Cv Noise Reduction Middle Colour Temperature Standard Auto Light off Picture Mode For setting up the picture mode and improving the TV picture quality Press the MENU button and then select Picture Mode Based on the environment and the requirement select the correct picture mode from the following options Standard Soft Natural User Dynamic Brightness Adjust the overall luminance of the picture Contrast Adjust the luminance ratio between black and white Colour Adjust the colour saturation within the picture Sharpness Adjust to achieve the optimum sharpness of edges and details within the picture Ti Adjust flesh tones so that they appear natural Only available when receiving systems int is NTSC Backlight Change the backlight level Noise Reduce the noise level of the connected devices You could select one of the following Reduction opti
5. Screen Menu cccecceceeeeeeeeteeeeeeeeees 9 Using the Option Menu cccceeeeeceeeeeetteeeereeeaes 10 Using the Channels Menu c cceeeeeeeeteees 12 Digital Media Player DMP ssassn 15 3 1 1 Enjoy Video Files sassen 15 3 1 2 Enjoy Music Files eeeeeeeeeeeereeeeees 17 3 1 3 Enjoy Picture Files eies 17 TroubleShooting eeeeeeeeeeeeeeeeeeteneeeeeeeeeteeeeeeaees 19 Servic CONMACE wecieca estietieehicesittieshstelieexaeteientes 22 4 English You can use shortcuts on the remote control for fast operation Refer to the Quick Setup Guide for more information 1 1 Turning your TV on or off To turn your TV on or off standby mode 1 Plug the AC power cord into a socket outlet of AC power supply 2 Switch on the I O Power switch at the bottom of the TV to turn on off your TV 3 When the TV is powered on press the POWER button on the remote control it goes into standby mode Press the POWER button again to turn on your TV BI NOTES When your TV is in standby mode it is still consuming power To completely disconnect power please remove the mains plug from the mains socket or switch off the I O Power switch If your TV does not receive an input signal for several minutes it automatically goes into standby mode 1 2 Selecting the Input Source Select the Input Source depending on the video device you have connected to your TV To select the input source
6. TV The TV will turn off automatically after 10 15 minutes if there is no signal There is no picture video Check cable connections remove and reconnect all cables connected to the TV and external devices Set your external devices Cable Set top Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI it should be connected to an HDMI input on the TV Make sure your connected devices are powered on Be sure to select the TV s correct source by pressing the SOURCE button on the TV remote The TV is not receiving all channels Make sure the Antenna Cable Satellite cable is connected securely Automatic scan TV channel through the CHANNELS menu setting The picture is distorted macroblock error small block dots pixelization If you are receiving the signal through Aerial or Satellite make sure the antenna is positioned correctly and the signal strength is good Compression of video contents may cause picture distortion especially on fast moving pictures such as sports and action movies A low signal can cause picture distortion This is not a TV issue The USB device is not recognized or a Device Format Checking Device or device Performance Test See the manual for the USB device to check that the USB device supports recording If the USB device has a lock ensure it is off Check that the
7. are flexible enough for long term use There are recurrent picture sound issues Check and change the signal source A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture To prevent this use felt pads on any surface of the TV that comes in direct contact with furniture P NOTES This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product English 21 Other Information 4 2 Service Contact Austria 43 0820420411 www eseco at Belgium 32 0 11 281780 www servilux be Denmark 45 44503039 www elektronik centret dk France 33 0800 835 897 www nse group com Germany 49 0 0800 9000169 www elesco europa com Hungary 36 614772070 www aagservice hu Ireland 44 28 3832 6119 www craigavon tv Italy 39 800 321 999 www hisenseitalia it Norway 47 815 81 333 www infocare no Spain 34 902027419 www hisense es Sweden 46 911 21 14 50 www assistkedjan se Switzerland 41 0 900782400 www stagicp ch The Nethelands 31 0 77 3060708 www technorep nl UK 44 0345 6104199 www hisense co uk www hisense europe com www hisense com en For more information please contact the service company of Hisense in your country 22 English
8. Hisense LED Backlight TV USER MANUAL Read the manual carefully and ensure you have fully understood its contents before operating this device for the first time ES J141510 English NO 1 Thank you for purchasing a Hisense TV This device lives up to the highest quality innovative technology and high user comfort Digital tuners Everything works with one remote control now Connect your TV directly to your terrestrial or satellite antenna or to cable and enjoy the contents in high quality without any loss Homi DOLBY WEEE Waste Electronic Electric Equipment European Directive 2002 96 EC The meaning of the symbol on the product its accessory or packaging indicates that this product shall not be treated as household waste Please dispose of this equipment at your applicable collection point for the recycling of electrical amp electronic equipments waste In the European Union and Other European countries in which there are separate collection systems for used electrical and electronic product By ensuring the correct disposal of this product you will help prevent potentially hazardous to the environment and to human health which could otherwise be caused by unsuitable waste handling of this product The recycling of materials will help conserve natural resources Please do not therefore dispose of your old electrical and electronic equipment with your household waste For more detailed information about recycling of
9. R The exclamation point within an BACK NO USER SERVICEABLE PARTS equilateral triangle is intended to INSIDE REFER SERVICING TO QUALIFIED alert the user to the presence of SERVICE PERSONNEL important operating and maintenance servicing instructions in the literature accompanying the appliance For your own safety and to prevent any damage to you or your TV please read and comply with the following safety instruction e This TV is meant to used only in home and office environments Protect it from high humidity high dust concentration heat moisture and wet conditions e Do not place any items on top of the television e Take care not to subject the television s surface to water and detergent e To prevent the spread of fire keep candles or other open flames away from this product e Always place the TV on an even stable non skip surface which can safely support the TV against overturn e Do not expose the television to direct sunlight and other sources of heat Place the TV in an upright position when transporting it If you have to briefly lay the TV down during transportation lay it front side down on an even and soft surface e Do not apply strong force or impact to the display panel This may cause damage resulting in injury e Do not move the television with the power cord plugged into a socket outlet This may cause electrical shock e Do not touch the the mains plug with wet hands This may cause electric shock
10. USB device can be formatted when connected to the PC Connect the USB to the TV and format it falls Ifa Device Performance Test or formatting failed it means that there is a problem with USB hardware or the performance of the USB hardware is too low Check that a USB device is connected Check that the channel is a recordable digital channel The recording function does A 3 A not work Ifthe signal is weak or does not exist the recording function will automatically be closed The TV will not record if the USB device has no free memory space Check that this is not the case Timeshift Mode does not work Check that a USB device is connected Radio channels and analogue broadcasts are not supported Data broadcast channels are not supported If the signal is weak or does not exist the Timeshift Mode function will automatically be closed Timeshift Mode can t be performed if the USB device has no free memory space Check that this is not the case 20 English Other Information The picture will not display in full screen Channels will have black bars on either side of the screen when displaying up scaled SD 4 3 contents Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV Adjust the picture size options on your external device or press the SIZE button to 16 9 that will display the whole scre
11. a USB device Allows you to make manual fine tuning of channels in ATV mode 1 Insert a USB storage device to the USB jack 2 Select the Export To USB mode A pop up menu appears press the lt 4 gt button to select whether to start copying the programme list Only DTV channels will be copied 3 If the Figure 1 shows it means that the exporting was successful Figure 1 Clone is successful Figure 2 Clone is failed If the figure 2 shows the export was not successful please check the following Check if the USB storage is inserted and working properly This function is only available for DTV channels Clone the channel list from a USB device to TV 1 Insert the USB storage on which you saved the edited channel list to your TV 2 Select the Import from USB mode If the channel list import is successful TV will restart automatically If the figure Clone is failed shows the importing was not successful Import from USB confirmation box will pop up the user selects the button Yes right No please check the following Check if the USB storage is inserted and working properly This function is only available for DTV channels Allows you to view the Cl Information Allows you to view the signal information Only available in DTV mode 14 English 3 1 Digital Media Player DMP Please note that manufacturer does not assume any responsibility for any lost data and cannot guarantee perf
12. ation Guide Press the lt gt buttons to turn on or turn off the Installation Guide effect by selecting On or Off Select your Mode Setting Home Mode Shop Mode or Premium Mode ested Home Mode Recommended mode for the home use and low power consumption se Mode Shop Mode Optimizes the picture for store environments Premium Mode Ideal picture and sound with higher power consumption Users can control HDMI CEC compatible device connected to the HDMI Jacks on TV according the remote control that came with TV To use CEC function you must set the HDMI _ CEC on WW NOTE HDMI Cables must be used to connect HDMI CEC compatible devices to your TV The connected device s HDMI CEC function must be tuned on f a connect One HDMI devcice that is not a HDMI CEC compatible all the CEC Control function may not work HDMI_CEC Depending on the connected HDMI device the CEC control function may not work Device List Display list of HDMI CEC devices that are connected to TV and select the source you want HDMI_CEC Turn CEC function on or off Auto Standby HDMI CEC device auto standby when you turn off TV When CEC is tuned on and you have connected an audio receiver HDMI ARC to your TV turning on Audio Receiver lets you use your TV s remode control to control the volume on the audio receiver You can set time manually or select automatic if the TV is connected to an antenna or cable sou
13. ct the color system from the following options Auto PAL PAL M SECAM PAL N NTSC SECAM Select the Sound system from the following options DK L M se alas BG L only for SECAM pene 4 Displays the current channel number Search Select the Search to start the manual tuning Fine Tune Press the lt gt buttons to make manual fine tuning adjustments 12 English Clone the channel list from TV to a USB device Allows you to make manual fine tuning of channels in ATV mode 1 Insert a USB storage device to the USB jack 2 Select the Export To USB mode A pop up menu appears press the lt 4 gt button to select whether to start copying the programme list Only DTV channels will be copied 3 If the Figure 1 shows it means that the exporting was successful Figure 1 Clone is successful Figure 2 Clone is failed If the figure 2 shows the export was not successful please check the following Check if the USB storage is inserted and working properly This function is only available for DTV channels Clone the channel list from a USB device to TV 1 Insert the USB storage on which you saved the edited channel list to your TV 2 Select the Import from USB mode If the channel list import is successful TV will restart automatically If the figure Clone is failed shows the importing was not successful please check the following Check if the USB storage is inserted and working properly This
14. ect compatibility with all mass storage devices Be sure to insert the USB disk mobile hard disk with standard USB2 0 port Press the DMP button to enter the DMP source eal You can press the EXIT button exit DMP source f RENN i Name 3 Movies Music la Picture 3 1 1 Enjoy Video Files 00 00 32 00 05 00 OKO 2 eo 00000 0eo0o00 1 Press the A W lt P buttons to select the video you want to view 2 Press the OK button to play the video 3 Press the m EXIT buttons to exit the video and return to the previous directory 4 Press the lt gt button to select the function icon and then press the OK to confirm Tool Bar D The progress bar when playing 2 Play Pause You can press the P Il button directly to play pause when there is no control bar on the screen 3 Play the previous video You can press the lt 4 button directly to achieve the function when no control bar display on the screen 4 Play the next video You can press the gt gt I button to achieve the function when no control bar display on the screen English 15 Advanced Features Fast backward Then press the OK button to select the backward speed You can press the lt lt button to achieve the function Fast forward Then press the OK button to select the forward speed You can press the gt gt button to achieve the function Select time to play 1 Press the lt g
15. en The remote control does not work Replace the remote control batteries with the poles in the right direction Clean the transmission window located on the top of the remote control Pairing the Remote Control with TV Not for TV models which use infrared remote control Try pointing the remote directly at the TV from 5 6 feet away A Not Supported message appears Check the supported resolution of the TV and adjust the external device s output resolution accordingly Refer to resolution settings in this manual There is a plastic smell from the TV This smell is normal and will dissipate over time TV is tilted to the right or left side front or back side Remove the stand base from the TV and reassemble it There are difficulties assembling the stand base Make sure the TV is placed on a flat surface It is necessary to use magnetized screw driver if you cannot remove the screws from the TV The Channel menu can not be selected The Channel menu is only available when the TV source is TV Your settings are lost after every time the TV is turned off If the TV is in the Shop Mode your settings will not be saved You should select the Home Mode or Premium Mode You have intermittent loss of audio or video Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables
16. function is only available for DTV channels 2 6 2 When the Reception Type is set to Cable Select a preset reception type Cable Select the Country you are in Use this to automatically find and store all available channels In the Channel search menu you can select DTV Scan ATV Scan or DTV ATV Scan and then press OK to search the channel Allows you to make manual fine tuning adjustments of the channel under DTV mode Frequency KHz Input the frequency value using the numeric buttons Symbol Input the symbol rate using the numeric buttons Press the lt P gt buttons to select Modulation type For a Modulation universal it should be Auto Search Select Search and press Ok to start the manual tuning Strength Display the Strength of the current signal Quality Display the quality of the current signal Allows you to make manual fine tuning adjustments if the channel reception is poor under ATV mode Store to 1 Displays the current store to channel Select the color system Auto PAL PAL M PAL N NTSC Colour System SECAM Svetem Select the sound system I DK L M BG L only for y SECAM Current Channel 4 Displays the current channel number Search Select the Search to start the manual tuning Fine Tune Press the lt gt buttons to make manual fine tuning adjustments English 13 Clone the channel list from TV to
17. hem Show Speed Allows you to browse the picture at different speed i Show Style Allows you to set how the picture appears on the screen Bechoround Allows you to enjoy the music when browsing the pictures if it is set On Picture info Allows you to view the picture information When the BGD Music is open and you are enjoying the music and browsing the pictures Press the RED button to play the previous music in the current directory Press the GREEN button to play the next music in the current directory English 17 d Features Most of the hard disks U disks are supported by the USB port of the set If the disks can not be identified it is the problem of the devices drivers but nothing with the TV set The USB port supports the voltage of 5V and the maximum current of 500mA Some storage devices are different from standard USB protocols so it will affect the correct identification for the digital multimedia player which is normal The time digital media player spends to read the information is different from the devices and the storage capacity It is normal that there may be a temporary slow speed to read the information Do not plug in or pull out the USB devices during reading the files or this may damage your system files Don t press other buttons repeatedly when the system is processing your last operation otherwise it will affect the processing speed Muti system works on this set As the diffe
18. ons Off Low Middle High and Auto Colour Adjust the colour components independently to achieve the desired warm or cool feeling Temperature by selecting one of the following options Standard Warm and Cool Auto Light Select Auto light On or Off English 7 23 Using te sound Men The sound setting allows the user to optimize the Sound output audio sounds of the TV Sound Mode Standard Balance o aa a Equalizer Auto Volume AD Switch SPDIF Output Adjust the sound settings Audio Delay Select the Sound Mode options based on the personal requirement Standard Music pounamode Movie Sport User Balance Adjust the relative volume of the speakers between the left and right speakers Allow the users preset with the 5 band Equalizer controller Press the lt gt buttons to Equalizer select the different audio frequency band between 120 Hz 500 Hz 1 5 KHz 5 KHz and 10 KHz Press the A buttons to adjust each of frequency band level individually Auto Volume Select the Auto Volume you can select On or Off AD Switch Select the AD Switch you can select On or Off Send digital audio to an external audio system You can select PCM Auto SPDIF Output pcm PCM outputs two channel audio regardless of the input format Auto Select digital audio output format Auto Audio Delay Select the Audio Delay you can select 1 2 10 or off
19. put this password you can continue to the next operation You can change password in the Change PIN submenu The Lock System is designed to prevent accidental retuning of the TV losing channels and prevent children watching unsuitable programmes The Lock System must be set to On for this function to operate If the Lock System is set to On you need to enter the password menu Reception Type Automatic Scan Digital TV Manual Scan Analogue Lock System TV Manual Scan Edit Programmes Export to USB Import from USB Restore oe Default To access the Lock System menu you must press the lt P buttons to select On and enter the password Enter the default password 0000 for first time use Enter a new password and then enter it again to confirm it The new PIN Change PIN will be activated This function can let you block some programs according to Block Programme contents This function allows you to set up blocking schemes to block specific channels and ratings You can set the lock channels watched by young people of different ages from 4 18 It operates according to information from the broadcasting station therefore if the signal has incorrect information this function will not operate Parental Guidance This TV is programmed to remember which option it was last set to even if you switch the TV off When a programme is locked or rated with delayed state a valid password must be entered Press
20. rce Auto Sync Allows to adjust the date and time manual when it is set to Off TIME y Select On to output the time information from digital signal DTV Clock The clock is set automatically when receiving a digital signal Off Time Allows you to set the off time that the TV will switch off automatically On Time Allows you to set the on time that the TV will switch on automatically 10 English The sleep timer automatically switches the TV to standby after the preset time has elapsed The clock will be set automatically when receiving a digital signal Time must be set before using Sleep Timer function Press the lt gt buttons to select a period of time after which the TV automatically switches to standby mode OFF 10 20 180 240 min The timer begins to count down from the number of minutes selected If you turn the TV off after setting the sleep timer the sleep timer setting will be erased Sleep Timer Select the Auto Sleep options based on the personal requirement Auto Sleep Off 3H 4H When you select a Time Zone city the TV time is set by the time offset information based on Time Zone and GMT Greenwich Mean Time which is received with the broadcast signal and the time is set automatically by a digital signal Time Zone Prevent unauthorized users such as children from watching unsuitable programme When you first use this function the default password is 0000 Once you in
21. rence of the devices compatibility and stability the picture may freeze or the function may not work during reading the files As the system is constantly upgraded there may be some difference between the real and the instruction without notice When the system can not work for a long time or there is a prompt for the abnormal system the current system may be in a abnormal operation condition You d better retry the current operation or restart the TV If the hard disk can t be identified Try to supply the disk with external power or replace with the standard USB2 0 cable shorter than 65 centimeters 10 When user uses USB devices we recommend that the total partition number of all devices does not exceed 11 otherwise the information on partition is possibly not to display 18 English Other Information 4 1 TroubleShooting If you have any questions about the TV first refer to this list If none of these troubleshooting tips apply please visit Germany www hisense de Italy www hisenseitalia it Spain www hisense es UK www hisense co uk Then click on Support or contact the call centre listed of this manual Make sure that you are using a digital signal Choose TV from the SOURCE list or use The TV image does not look digital Spier bar as good as it did in the store Check if the channels you are watching are also available in HD Make sure you are sitting a minimum of three times
22. ructions e If the circulation is not ensured there is a danger of fire e Make sure no small or bigger items are falling into ventilation slots This causes short circuits that may lead to fire e If something fell into the TV immediately unplug it from power and call the customer service e Before cleaning remove the mains plug from the wall socket This might result in electric shock or fire For stubborn dirt 1 Dampen a soft cloth with clean water 2 Wire the cloth 3 Gently wipe the surface 4 Wipe away all the moisture e Don t use any detergent This may result in damage to the display panel e Gently wipe the surface of the display panel and the stand by using a soth clean cloth to clean the dirt or fingerprints e To insure the safe operation only the stand or wall mount brackets provided by the manufacturer or local importer is applicable e Be sure to unplug the AC power cord from power supply before installing a stand or wall mount brackets English 3 Contents 1 1 1 2 1 3 1 4 2 3 2 4 2 5 2 6 Turning your TV On Of Off eeeseeeeeeeeteeeeeeeseeees 5 Selecting the Input Source 0 0 eee ceeeteeeeeesteeees 5 Selecting the aspect ratio 0 0 eeeeeeeeeeeeeeeees 5 AUdiO FUNCTION gripis isato 6 How to use the Menu cc eeeeeeseeeteseeeteneeeerneeees 7 Using the Picture Menu ccceesseeeeeeesteeeeeeeeaes 7 Using the Sound Menu ccccccceeeeesessssestteees 8 Using the
23. s correct or not There is no sound or the Please check the volume of the external device connected to your TV sound is too low at maximum volume lf you are using an external device make sure the audio cables are connected to the The picture is good but there is no sound correct audio input jacks on the TV lf you are using an external device check the device s audio output option ex you may need to change your cable box s audio option to HDMI when you have a HDMI connected to your TV If you are using DVI or VGA cable a separate audio cable is required If your TV has a headphone jack make sure there is nothing plugged into it The speakers are making an inappropriate noise Check the cable connections Make sure a video cable is not connected to an audio input For antenna or cable connections check the signal strength Low signal level may cause sound distortion English 19 Other Information The TV will not turn on Make sure the AC power cord is securely plugged in to the wall outlet and the TV Make sure the wall outlet is working Try pressing the POWER button on the TV to make sure the problem is not the remote The TV turns off automatically Ensure the Sleep Timer is set to Off in the Time menu If your PC is connected to the TV check your PC power settings Make sure the AC power cord is plugged in securely to the wall outlet and the
24. t button to select the position you want to set 2 Press 0 9 to set the time and press the A W lt P button to adjust it 3 Press the OK button to confirm and the video will to play at the time you have set Options 1 Press the A F buttons to select the options in the menu 2 Press the lt P gt buttons to select the settings 3 Press the OK button to confirm Play list 1 Press the A V buttons to select the video 2 Press the OK button to confirm And press the EXIT button to exit the menu Program info It allows you to view the program information Stop playback Playable format list This unit has USB digital multimedia player It can identify such standard USB1 1 and USB2 0 devices as hardware USB disk etc At the same time you can browse the images listen to music and enjoy various files such as MPEG1 MPEG2 MPEG4 DAT etc Picture JPEG BMP PNG Music MP3 LPCM Video MPEG1 dat MPEG2 mpg MPEG4 mpg H 264 You can press the SIZE button to change the aspect ratio Fit Full Screen Original while playing the video Manufacurer will not assume any responsibility for any lost data and cannot guarantee perfect compatibility with all mass storage devices 16 English 3 1 2 Enjoy Music Files 1 Press the A W lt gt buttons to select the music you want to view 2 Press the OK button to play the music 3 All the music is listed on the left Press
25. tereo Dual Sound Reception ATV Mode When a programme is selected press the LANGUAGE I II button to display the sound information for the selected station On Screen Display MONO NICAM STEREO NICAM DUAL I NICAM DUAL II NICAM DUAL I II Mono sound selection If the stereo signal is weak in stereo reception you can switch to mono by pressing the I II button In mono reception the clarity of sound is improved To switch back to stereo press the I II button again Language selection for dual language broadcast If a programme permits in two languages dual language you can switch to NICAM DUAL I NICAM DUAL II NICAM DUAL I II or MONO by pressing the I II button repeatedly Sends the primary broadcast language to the loudspeakers Sends the secondary broadcast language to the loudspeakers Sends the primary and secondary broadcast languages to the loudspeakers 6 English 2 1 Howto use the Menu 1 Press the MENU button to open the main menu Picture 2 Press the A V buttons to select a menu option ee o_o z ata then press the gt OK buttons to enter the menu Contrast 50 e ____ Colou e 3 In each menu you can Sape a Adjust the picture Tint 50 s Press the A F buttons to select an item Press the gt OK buttons to enter the submenu Press the RETURN buttons to return to the previous menu 4 Press the MENU
26. the lt P gt buttons to select On or Off To prevent Child Lock unauthorized users such as children from changing TV s settings Allows the blue screen to turn On Off during no signal conditions Only available in ATV mode Set the PVR file system English 11 Software Upgrade the software of the TV Update Restore Factory Restore all settings to the factory defaults Settings Version Display the software version information 2 6 1 2 6 Using the Channel Menu When the Reception Type is set to Air TV Channel Reception Type Country Automatic Scan Digital TV Manual Scan Analogue TV Manual Scan Air TV Germany Tune in local television services Edit Programmes Export to USB Import from USB CI Information Signal Information Reception Type Select a preset reception type Air TV Country Select the Country you are in Automatic Scan Digital TV Manual Scan Use this to automatically find and store all available channels In the Channel search menu you can select DTV Scan ATV Scan or DTV ATV Scan and then press OK to search the channels Allow you to make manual fine tuning adjustments of the channel under DTV mode Analogue TV Manual Scan Allow you to make manual fine tuning adjustments if the channel reception is poor under ATV mode Store to 1 Displays the current store to channel Colour System Sele
27. the A F buttons to select the music and press the P button to mark it You can press the CH A V buttons to turn to the previous next page Press the GREEN button to select the Mode All Mark One 4 Press the EXIT button to exit the music playback interface 3 1 3 Enjoy Picture Files 1 Press the A W lt b gt buttons to select the picture you want to view 2 Press the m EXIT buttons to exit the picture and return to the previous directory Tool Bar cee Le OJORO cir T T f oo 00 60 0O OO Press the MENU button to display exit the picture control bar and press the lt gt buttons to select the function icon and then press the OK button to confirm Browse the previous picture You can press the I lt button directly to achieve the function when no control bar displays on the screen Browse the next picture You can press the gt button directly to achieve the function when no control bar displays on the screen Allows the picture to rotate 90 degrees clockwise Allows the picture to rotate 90 degrees anti clockwise Play pause You can press the P II button directly when no control bar on the screen Stop browsing the picture You can press the m button directly when no control bar on the screen Zoom in the picture Zoom out the picture Option Set Press the A F buttons to select the options and press the lt P gt buttons to set t
28. the diagonal of the TV away Compression of video contents may cause picture distortion especially in fast moving The picture is distorted pictures such as sports and action movies macroblock error small Low signal level or bad quality can cause picture distortion This is not a TV issue block dots pixelization Mobile phones used close to the TV less than 1m may cause noise in picture on analogue and digital TV If you re using a component connection make sure the component cables are Colour is wrong or missing connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen There is poor colour or Adjust the Brightness Sharpness Backlight in the Picture menu brightness Press the SIZE button on the TV remote to change the picture zoom to 16 9 There is a dotted line on the Adjust the picture screen display in the PC RGB Settings menu Press the MENU edge of the screen button and select System gt PC RGB Settings Change the set top box resolution Verify if the antenna is connected properly Non earthed audio devices neon lights high buildings or mountains can influence the When the picture is distorted picture quality Try to improve the picture by changing the antenna direction or place or poor devices away from the TV Image may be abnormal when the TV system is changed as a result of the manual search If so please check whether TV system i
29. the picture horizontally in linear proportion Black bars will appear on both the left and right of the screen This selection will allow you to zoom in the picture without any alteration while filling the entire screen However the border of the picture will be cropped This selection will allow you to zoom in the picture without any alteration However the top and bottom of the picture will be cropped And it allow you to adjust the picture horizontally in linear proportion Black bars will appear on both the left and right of the screen This selection will allow you to zoom in the picture without any alteration while filling the entire screen However the border of the picture will be cropped This selection is similar to 16 9 mode but the picture slightly stretches horizontally side and clips off a little from the top and bottom This selection is similar to 16 9 mode but the picture slightly stretches O O horizontally side and clips off a little from the top and bottom O This selection will display the picture according to the aspect ratio of the input the aspect ratio of the This selection will display O O the picture according to C source input source O O p a Pelon will detect the resolution of the signal and display an image with the same number of pixels The signal is optional in some source eg the HDMI sourse 1 4 Audio function I II S
30. this product please contact your local city office your household waste disposal service or the shop where you purchased the product ROHS Restriction of Hazardous Substance European Directive 2002 95 EC This European directive limits the use of dangerous and hazardous substances which are difficult to recycle This allows recycling easily the EEE and contributes to the safeguard of the environment Substances included in this product match to the RoHS directive Battery To protect your environment do not throw away battery with common domestic waste Throw the battery in a collecting point indicated Danger of explosion do not throw the battery into fire or expose the battery to high tem perature The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries DIGITAL PLUS Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories English 1 Safety instructions The lightning flash with arrowhead CAUTION symbol within an equilateral triangle is intended to alert the user to the RISK OF ELECTRIC SHOCK presence of uninsulated dangerous DO NOT OPEN voltage within the product s enclosure that may be of sufficient magnitude to CAUTION TO REDUCE THE RISK OF ELECTRIC constitute a risk of electric shock SHOCK DO NOT REMOVE COVER O
Download Pdf Manuals
Related Search