Ematic EMW1021 flat panel floorstand
Contents
1. Screen level adjustment 3 3 Run the cable through the columns using cable management holes Maintenance Check that the bracket is secure and safe to use at regular intervals at least every three months Please contact your dealer if you have any questions INSTALLATION MANUAL Flat Panel Mobile Cart 200x200 300x300 400x200 400x400 600x400 CAUTION DO NOT EXCEED RATED LISTED WEIGHT CAPACITY SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR ISSUED JAN 2013 144 NOTE Read the entire instruction manual before you start installation and assembly Z WARNING e Do not begin the installation until you have read and understood the instructions and warnings contained in this installation sheet If you have any question regarding any of the instructions or warnings please contact your local distributor e This mounting bracket was designed to be installed and utilised ONLY as specified in this manual Improper installation of this product may cause damage or serious injury e Always use an assistant or mechanical lifting equipment to safely lift and position the equipment e Tighten screws firmly but do not over tighten Over tightening can cause damage to the items this greatly reduces their holding power e This product is intended for indoor use only Using this product outdoors could lead to product failure and personal injury IMPORTA2. NT Ensure you have received all parts according to the component checklist prior to installation If any parts are missing or faulty telephone your local distributor for a replacement universal plate x1 fix plate x1 B Cc Se column x2 base x1 F Cy top sail x2 Package M M5x14 x4 M6x14 x4 M8x20 x4 ir aa M A M B M C i M8x30 x4 washer x4 small spacer x8 big spacer x4 M E M F M G M H Package Y Ct CO M8x15 x4 M8x20 x4 M10x35 x2 M5x15 x1 plastic bush x1 P A P B P C 5 i J J D8 washer x8 5mmAllen key x1 8mmAllen key x1 P F D10 washer x2 P G P H P I 2 1 Attaching the Base to the Column 2 Installing the Shelf Bracket and the Universal Plate Re attach the shelf bracket to the columns at the desired position and secure it using just removed screws Attach the base to the bottom of columns using appropriate screws and washers tighten screws with Allen key E eae Cea Attach the fixed plate to the columns at the desired position and secure it using appropriate screws and washers 34 Attach the universal plate to the fixed plate using appropriate screws washers and nuts 4 3 Installin
3. g the Glass Shelf 4 2 For Recessed Back Screen or to Access A V Inputs Attach the glass shelf to the shelf bracket using the screw and the plastic bush Tighten the screw with a proper phillips screwdriver Note Choose appropriate screws washers and spacers if necessary according to the type of screen 4 Installing the Adapter Brackets Position the adapter brackets as close as possible to the center of the display Screw the adapter brackets onto the display 4 1 For Flat Back Screen N tighten all screws but do not over tighten V i Lea Mey MA 5 Hang the Display onto the Top Plate w X B Tv j tighten Tighten the bottom screws to secure the bracket to the universal plate 54 6
Download Pdf Manuals
Related Search