Powerplus POWX0440 power sander
Contents
1. 1 x sander paper 1 x dust box 6 If any parts are missing or damaged please contact your dealer Copyright 2013 VARO Page 3 www varo com POWERPLUS POWX0440 EN 4 SYMBOLS In this manual and or on the machine the following symbols are used Denotes risk of personal FR injury or damage to the tool V Read manual before use Wear eye protection In accordance with essential requirements of the European directive s Wear noise protection Wear a mask In dusty conditions Class II The machine is double insulated Earthing wire is therefore not necessary 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions Failure to heed warnings and follow instructions may result in electric shock fire and or serious injury Keep safety warnings and instructions for future reference The term power tool in the safety warnings refers to your mains operated corded power tool or battery operated cordless power tool 5 1 Working area Keep working area clean and well lit Untidy and dark areas can lead to accidents Do not operate power tools in potentially explosive surroundings for example in the presence of inflammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep children and bystanders at a distance when operating a power tool Distractions can cause you to lose control of it 5 2 Electrical safety Always check that the po2. a power tool may result in serious personal injury Use safety equipment Always wear eye protection Using safety equipment such as a dust mask non skid safety shoes a hard hat or hearing protection whenever it is needed will reduce the risk of personal injury Avoid accidental starts Ensure the switch is in the off position before inserting the plug Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely Remove any adjusting keys or spanners before turning on the power tool A spanner or key left attached to a rotating part of the power tool may result in personal injury Do not reach out too far Keep your feet firmly on the ground at all times This will enable you retain control over the power tool in unexpected situations Dress properly Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from the power tool Loose clothes jewellery or long hair can become entangled in the moving parts If there are devices for connecting dust extraction and collection facilities please ensure that they are attached and used correctly Using such devices can reduce dust related hazards 5 4 Power tool use and care Do not expect the power tool to do more than it can Use the correct power tool for what you want to do A power tool will achieve better results and be safer if used in the context for which it was designe
3. POWERPLUS POWX0440 EN 1 o 3 2 DESCRIPTION FIG A 3 3 ENDE EM 3 4 0 m M O m 4 5 GENERAL POWER TOOL SAFETY WARNINGS 4 5 1 Los regi e 4 5 2 Electrical safely AOP ESO OR ERO O anaia P O SO eee 4 5 3 Personal safety E 5 5 4 Power tool use and Care iei iieri e Eno dense rn ind 5 5 5 NO o E 5 6 MACHINE SPECIFIC SAFETY WARNINGS 5 7 o 6 7 1 Fitting the sanding sheeis rsnnnonnnnnnn nn REBRE EE REER HRE RE En nn EE 6 7 1 1 Hook and loop system Fig 1 ooronsrnnonnnrnn iii r r rr 6 Z 8 1 SWITCH ON and OP 6 8 2 Speed regulation 6 nnrssrrrrrrnnanssnnnennnnnnennenennnanennneennnnnnenneenes 6 8 3 GUIDO Handie ER RER E EE REEE REEERE AE RTG 7 8 4 Using the dust collection box 3 t roe pn naa oRcha Miu RRkXR IER RRRR MUR E Re RR KANADA 7 8 4 1 O STN o n o r te 7 8 4 2 Noe L O 7 8 4 3 RO stosia a oa ods an o ono 7 8 4 4 OS E A A A T A EA AE 7 9 CLEANING AND MAINTENANCE 7 9 1 CICAINIAG corssier MM P E E 7 10 E T ee non nn nane nn nn ESS EEE nn 7 11 O i ion m ns i ini li i in ns ska 8 12 0 cc lt c
4. d Definitely excluded from the warranty is damage resulting from fluid permeation excessive dust penetration intentional damage on purpose or by gross carelessness inappropriate usage use for purposes for which the device is not suitable incompetent usage e g not following the instructions given in the manual inexpert assembly lightning strike erroneus net voltage This list is not exhaustive Acceptance of claims under warranty can never lead to the prolongation of the warranty period nor commencement of a new warranty period in case of a device replacement Devices or parts which are replaced under the warranty therefore remain the property of Varo NV We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained Clean ventilation slots carbon brushes serviced regularly etc Your purchase receipt must be kept as proof of date of purchase Your appliance must be returned undismantled to your dealer in an acceptably clean state in its original blow moulded case if applicable to the unit accompanied by proof of purchase 13 ENVIRONMENT SI Should your appliance need replacement after extended use do not dispose of it E DS with the household refuse but in an environmentally safe way ES Waste produced by electrical machine items should not be handled like normal household rubbish Please recycle where recycle facilitie
5. d Do not use the power tool if the switch cannot turn it on and off A power tool with a broken switch is dangerous and must be repaired Disconnect the plug from the power source before making adjustments changing accessories or storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally Store power tools when not in use out of the reach of children and do not allow people who are not familiar with the power tool or these instructions to operate it Power tools are potentially dangerous in the hands of untrained users Maintain power tools Check for misalignment or jammed moving parts breakages or any other feature that might affect the operation of the power tool If it is damaged the power tool must be repaired Many accidents are caused by using poorly maintained power tools Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control Use the power tool accessories and cutting tools etc in accordance with these instructions and in the manner intended for the particular type of power tool taking into account the working conditions and the work which needs to be done Using a power tool in ways for which it was not intended can lead to potentially hazardous situations 5 5 Service Your power tool should be serviced by a qualified specialist using only standard spare parts This will ensu
6. lt cc 8 13 R rau aae 8 Copyright 2013 VARO Page 1 www varo com PO WERPLUS HIGH QUALITY TOOLS POWX0440 14 DECLARATION OF CONFORMITY Copyright 2013 VARO Page 2 WWW Varo com POWER US HIGH QUALITY TOOLS POWX0440 EN FINISHING SANDER 330W POWX0440 1 APPLICATION The sander is used to sand and buff wood plastic and similar materials It is very important to use the correct sandpaper It is not designed for commercial use before using the appliance for your own safety Your power tool should WARNING Read this manual and general safety instructions carefully only be passed on together with these instructions N DESCRIPTION FIG A Guide handle ON OFF Switch button Dust collection box Paper clamp Hook and loop sanding plate Speed control dial Sanding paper Dust extraction port Front cover Rear cover Release button PACKAGE CONTENT LIST Remove all packaging materials Remove remaining packing and package inserts if included Check that the package contents are complete Check the appliance the power cord the power plug and all accessories for transportation damage Keep the packing materials as far as possible till the end of the warranty period Dispose it into your local waste disposal system afterwards 1 JOE m a z WARNING Packaging materials are not toys Children must not play with plastic bags Danger of suffocation 1 x machine 1 x manual
7. m Cable length 3m Copyright 2013 VARO Page 7 www varo com POWERPLUS HIGH QUALITY TOOLS POW X0440 EN 11 NOISE Noise emission values measured according to relevant standard K 3 Acoustic pressure level LpA 89 dB A Acoustic power level LwA 100 dB A ATTENTION Wear hearing protection when sound pressure is over 85 i N dB A aw Vibration 10 9 m s K 1 5 m s ae WARRANTY This product is warranted for a 36 month period effective from the date of purchase by the first user This warranty covers all material or production flaws excluding batteries chargers defective parts subject to normal wear amp tear such as bearings brushes cables and plugs or accessories such as drills drill bits saw blades etc damage or defects resulting from maltreatment accidents or alterations nor the cost of transportation Damage and or defects resulting from inappropriate use also do not fall under the warranty provisions We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool Repairs may only be carried out by an authorised customer service centre for Powerplus tools You can always obtain more information at the number 00 32 3 292 92 90 Any transportation costs shall always be borne by the customer unless agreed otherwise in writing Atthe same time no claim can be made on the warranty if the damage of the device is the result of negligent maintenance or overloa
8. nd left of the dust collection box 3 are into place and they are secured before beginning operation 8 4 2 To remove When removing the dust collection box follow the above procedure in reverse order See Fig 6 If the dust collection box is full you can remove it from this tool and open the cover of box empty dust wood bust etc in the body finally clean the dust collection box 8 4 3 To remove Hold the front cover with one hand and the rear cover with the other There are release buttons on the sides of the rear cover Using your thumb and fingers press the release button in and pull the rear cover off 8 4 4 To install When assembling the dust collection box follow the above procedure in reverse order 9 CLEANING AND MAINTENANCE A Attention Before performing any work on the equipment pull the power plug 1 Cleaning Keep the ventilation slots of the machine clean to prevent overheating of the engine Regularly clean the machine housing with a soft cloth preferably after each use Keep the ventilation slots free from dust and dirt If the dirt does not come off use a soft cloth moistened with soapy water Li u m Oo Never use solvents such as petrol alcohol ammonia water etc These solvents may damage the plastic parts 10 TECHNICAL DETAILS Rated Voltage 230 240V Rated Freguency 50Hz Rated Power 330W Rotation speed 6000 11000min Oscillating freguency 12000 22000min Sanding plate size 115x230m
9. paper clamps 4 Open the paper clamps 4 on both sides of the sanding plate 5 as the direction of arrow shows on the Fig 2 and remove the worn out sand paper Place a new sand paper on the sanding plate observing the holes in the sand paper fit to the holes of the sanding plate Bend the paper to the sanding plate and fasten one clamp 4 first Press the sand paper against the sanding plate bend the other end and fasten second clamp Attention This finishing sander is not suitable for wet sanding jobs WARNING The sand paper must be fitted firmly on sanding plate and should not come loose 8 OPERATION 8 1 Switch on and off Connect the plug to the power supply Switch the power tool on push the ON OFF switch button 2 forwards onto the I position Switch the power tool off pull the ON OFF switch button backwards to the O position WARNING Never use the machine for sanding magnesium work piece 8 2 Speed regulation 6 Turn to the speed adjusting dial to regulate the vibration speed The number of vibration varies of 6000 to 11000 per minute Copyright 2013 VARO Page 6 www varo com POWERPLUS POWX0440 EN 8 3 Guide handle This tool has a guide handle 1 on the front of this tool which should be used only with both handles 8 4 Using the dust collection box 3 8 4 1 To install pull and slide dust collection box 3 into the dust extraction port 8 make sure the latches on the right a
10. re that it meets the required safety standards MACHINE SPECIFIC SAFETY WARNINGS Always wear safety goggles and a dust mask during your work with the finishing sander Always secure the workpiece by clamps to avoid slipping away Always keep the holes in the baseplate clean from dust Observe the applicable regulations when sanding painted surfaces Whenever possible use a vacuum extractor for dust collection n n u m GO Copyright 2013 VARO Page 5 www varo com POWERPLUS POWX0440 EN Remove dust and other waste matter in an environmentally safe way Take special care when sanding lead based paint All persons entering the work area must wear a mask specially designed for protection against lead paint dust and fumes Children and pregnant women must not enter the work area Do not eat drink or smoke in the work area 7 ASSEMBLY 7 1 Fitting the sanding sheets 7 1 1 Hook and loop system Fig 1 To attach sand paper 7 first remove all dirt or foreign matter from the sanding plate 5 Then attach the sand paper to the sanding plate using the hook and loop system of the sand paper and the sanding plate Make sure the perforations in the paper coincide with those on the sanding plate to ensure optimal dust collection The sand paper should rest flush on the sanding plate and must not come loose WARNING When removing the sanding paper follow the above procedure in reverse order 7 1 2 With
11. s exist Check with your Local Authority or retailer for recycling advice Copyright 2013 VARO Page 8 www varo com POWERPLUS POWX0440 EN 14 DECLARATION OF CONFORMITY VARO N V Joseph Van Instraat 9 BE2500 Lier BELGIUM declares that Product Finishing Sander 330W Trade mark POWERplus Model POW X0440 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives based on the application of European harmonized standards Any unauthorized modification of the apparatus voids this declaration European Directives including if applicable their amendments up to the date of signature 2011 65 EU 2006 42 EC 2004 108 EC European harmonized standards including if applicable their amendments up to the date of signature EN60745 1 2009 EN60745 2 4 2009 EN55014 1 2006 EN55014 2 1997 EN61000 3 2 2006 EN61000 3 3 2008 Keeper of the Technical Documentation Philippe Vankerkhove VARO Vic Van Rompuy N V The undersigned acts on behalf of the company CEO A gt Philippe Vankerkhove Regulatory Affairs Compliance Manager 06 06 13 Copyright 2013 VARO Page 9 www varo com
12. wer supply corresponds to the voltage on the rating plate Power tool plugs must match the outlet Never modify the plug in any way Do not use adapter plugs with earthed power tools Unmodified plugs and matching outlets will reduce the risk of an electric shock Avoid body contact with earthed surfaces such as pipes radiators kitchen ranges and refrigerators There is an increased risk of an electric shock if your body is earthed Do not expose power tools to rain or wet conditions If water gets inside a power tool it will increase the risk of an electric shock Do not damage the cord Never use the cord for carrying pulling or unplugging the power tool Keep the cord away from heat oil sharp edges or moving parts Damaged or entangled cords increase the risk of an electric shock When operating a power tool outdoors use an extension cable suitable for outdoor use Using a cord suitable for outdoor use reduces the risk of an electric shock f operating a power tool in a damp location is unavoidable use a power supply protected by a residual current device RCD Using an RCD reduces the risk of an electric shock Copyright 2013 VARO Page 4 www varo com POWERPLUS POWX0440 EN 5 3 Personal safety Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool when you are tired or under the influence of drugs alcohol or medication A moment of inattention when operating
Download Pdf Manuals
Related Search