Chief FSB4236B mounting kit
Contents
1. INSTALLATION INSTRUCTIONS FSB 4236 FLAT PANEL DISPLAY ADAPTER PLATE For SONY KLV S15G10 Prior to assembly unpack carton completely and verify contents If you are missing any of the following components please contact Customer Service at 1 800 582 6480 0 Figure 1 ve 1 Base Adapter Bracket 4 10 24 x 1 2 Button Head Cap Screws 1 VESA Interface Bracket 4 14 20 x 3 8 Button Head Cap Screws 4 Mounting Buttons 4 M4 Flat Washers 4 M4 x 6mm Phillips Pan Head Screws 1 5 32 Hex Key 1 1 8 Hex Key BEFORE PROCEEDING READ INSTALLATION INSTRUCTIONS COMPLETELY CAUTION FLAT PANEL DISPLAYS ARE EXTREMELY FRAGILE 1 Using a Phillips head screwdriver remove Sony s table stand from display Tmportant Keep the four Phillips pan head screws removed with the table stand They will be used in the interface assembly 2 Assemble Brackets Attach base adapter bracket to VESA interface bracket using four 44 20 x 3 8 Phillips pan head screws see Figure 2 NOTE If installing screen onto a VESA 100mm X 100mm mount skip to step 4 mounting button installation is not required 3 Mounting Button Installation Install four Mounting Buttons using four 10 24 x 1 2 Phillips pan head screws see Figure 3 4 Assemble bracket to display Attach assembled bracket to display using four M4 washers and the four M4 screws removed earlier from the display see Figure 4 4 10 24 X 1 2 BUTTON HEAD CAP SCRE2. W 1 BASE ADAPTER BRACKET 4 MOUNTING BUTTONS a 4 1 4 20 x 3 8 BUTTON HEAD SCREWS I 1 VESA INTERFACE BRACKET Figure 2 Figure 3 8804 000300 Rev B 10 16 06 CHIEF MANUFACTURING INC 1 800 582 6480 Fax 1 877 894 6918 Email chief chiefmfg com 4 M4 FASTENERS INCLUDED WITH DISPLAY 4 M4 FLAT WASHERS Figure 4 5 For Chief Q2 mounts with 5 X 5 Mounting System With the aid of another person lift the display up to the mount align the mounting buttons on the display with the slots in the mount and set the display into place 6 Lower safety latch on the Chief Mount to secure your display making sure latch is completely engaged 7 For VESA 100mm X 100mm Mounting Systems With the aid of another person lift display up to the mount align threaded holes of interface bracket to mounting holes of mount 8 Using four M4 x 6mm Phillips pan head screws attach display to mount per mount instructions Page 2
Download Pdf Manuals
Related Search