Elite Screens Evanesce Tab-Tension 114"
Contents
1. Rev 12 2 2014 EA info elitescreens com 11 Below ceiling installation instructions Please make sure all parts listed below are included before proceeding with the installation Hardware Parts List for below ceiling installation A End Flange x 2 B Hanging bracket x 2 C Threaded rod x 4 D Socket wrench x 1 Ny E M8x16mmx1 5mm F M8 nut x 20 G M8 Top expanding bolt x 4 H M8x40mm hex screw x 4 S 2 S 1 Measure and cut the ceiling installation slot The width should not exceed 100mm and not less than the width of the screen s housing Measure the length of your screen to determine the length Note The length of the installation space is not greater than the screen size table C3 and the width is not less than the screen size table A4 Consult the dimensions table C in regards to accommodating the screen casing Ceiling Truss 100 Ceiling Screen installation slot 2 Drill 4 holes in the ceiling that correspond with the attachments on the various casing sizes The width should be 120mm The length of A4 in the diagram below depicts the distance between the holes located on each ear end of the screen s case O10 120 L A4 i D Install screw holes The ceiling wall 3 The M8 expanding bolts G mount into thick wood beams ston2. hw ew Seon Oe oe ee R In Ceiling Electric Motorized Front Projection Screen Evanesce Tab Tension Series User s Guide Rev 12 2 2014 EA info elitescreens com Important Safety amp Warning Precautions Make sure to read this user s guide and follow the procedure below Caution The screen s Black Top Drop is already set to its maximum drop distance There is NO extra Black Top Drop in the roller Please be aware of this as it will void your warranty with Elite Screens Unapproved changes or modifications except for cutting the power cord for hardwire installations to this unit are prohibited and will void your warranty For more information please contact our Technical Support Department at 877 511 1211 Ext 604 e Please retain this user s guide for future reference e To avoid damaging the unit do not use with any unauthorized accessories not recommended by the manufacturer e Handle the unit carefully during transportation to avoid any damages e To ensure safe and reliable operation direct connection to a properly grounded power source is advised e The power outlet supplying power to the unit should be close to the unit and easily accessible e Do not install the unit on uneven or inclined surfaces e Donot place any heavy objects over the power cord e Position the power cord properly to avoid creating a trip obstacle e To avoid an electrical shock or fire due to a loose contact or short circuit do n
3. Blue Down Yellow Common Local Wall Switch In Wall UP DOWN Switch Module ZIW Module Elite Electric Motorized Screen Steps to attach Elite Screens Motorized Screen to your local wall switch 1 Attach Elite Screens ZIW Module in wall switch module to your local wall switch as shown in diagram above 2 Attach an RJ 45 Ethernet cable not included to the ZIW Module and the other end to the RJ 45 input on your Elite electric screen 3 After testing the connection place the in wall switch module in or on the wall and wire the Ethernet cable to complete the set up NOTE Please be aware that Ethernet cables have length limitations so please make test before concealing the cable into the wall Rev 12 2 2014 EA info elitescreens com 6 Hardware Parts List for Evanesce Tab Tension Series Please make sure all parts listed below are included before proceeding with the installation R j usa l W i _ N Pe cem P si Hardware Parts List QTY A Case Rail Nut tt 46 B Hex Screw O 46 COL D Suspension Bar qa E Washer O J810 F HexNut O 46 Installation Instructions Please consult a professional installer Elite Screens is not liable for faulty installations Power 1 The Evanesce Series includes a 3 Prong Power Cord for use in a non concealed power outlet If your installation will be entirely concealed including power outlet Elite Screens strongly recommends a hardwire connection Pl
4. WA M v WW il v SSH 1 e D iii PM UM NI IN ZA Il Y UY EN y Lom IE la 1 A IY AJ 7 oe E E HH N N E Lil E iii HH LI BET a l Go D 1 RR el UR to IA JJA FLU ee ASE Je pr o gt Qi a B i a a g Ed e Jo Rev 12 2 2014 EA info elitescreens com Optional Installation parts amp hardware not included A Screw bolt X 4 Washer X 8 Nut X 8 1 Place the Hanging Bracket C in the desired location on the screen s housing and measure the distance as shown below L Distance 2 Mark the location of where the screen will be installed according to the distance L and then secure the bolt to the ceiling 3 Install the screen to the screw bolt as shown in the figure below Rev 12 2 2014 EA info elitescreens com 10 Evanesce Tab Tension Series Dimensions Table Unit mm View Case View Top c Overall Case Width A1 Length A3 A4 A5 Height Border B2 O Height B5 Width C1 C2 CG C4 A A2 B B1 83 Ba C ITEIOOVW2 E8 os 2347 2407 1947 2342 1524 203 1827 118 1945 100 os 50 _925 145 180 rrexzovw2 e8 12043 2438 os 2770 2830 2370 2765 1828 203 2131 118 2249 100 os sof 925 14s 180 TELOOHW2 E8 100 169 2214 os 2530 2590 2130 252
5. device s receiver Y Connect the equipment into a different power outlet other than the device Pre Installation 1 Carefully unpack the screen 2 Always handle the screen in a leveled position on a clean surface 3 In order to protect the screen from exposure to stains keep the screen out of contact with foreign particles such as dust sawdust and or liquids Regardless of the mounting method the screen should be securely supported so that the vibration or pulling on the viewing surface will not cause the casing to become loose or fall The installer must insure that the fasteners used are of adequate strength and suitable for the installation location Rev 12 2 2014 EA info elitescreens com 3 Accessories for Evanesce Tab Tension Series IR Remote Red Green E 12V Trigger Rev 12 2 2014 EA Please make sure all accessories listed below are included before proceeding B C RF Remote 3 Way Wall Switch AAA Batteries F H In Wall RJ 45 Module Bubble Level info elitescreens com 4 Control System for Evanesce Tab Tension Series RJ 45 INPUT FOR 5 12V TRIGGER 1 5 12V Trigger The built in 5 12V trigger input Ke allows your screen to synchronize its drop amp rise jj sea f with the projector s power cycle The screen o deploys when the projector powers up and will retract when the projector powers down The 5 12 volt adaptor connects to your projector s trigger output
6. via a separate cable that may or may not be provided by the manufacturer of the projector The trigger feature will not work To Projector without an output cable from the projector but it can be tested by connecting the Red and Green cable to a 9 volt battery Red DC12V Green OV j 5 12 VOLT TRIGGER CABLE 2 3 Way Wall Switch The 3 way wall 3 IR Eye Receiver plugs directly into the switch is a wall mount control box with screen s RJ 45 input to present a low profile an up stop down button and plugs line of sight control option for your IR remote directly into the screen s RJ 45 input control even in a recessed ceiling installation P ndo a pr ata _ E o SS Wall mounted Receiver Extension Sensor ams Transmitter 4 IR Remote Control The Infrared 5 RF Remote Control The radio functions by direct line of sight contact waves eliminate the need for a direct with a beam range of 30 feet line of sight with a range of 150 feet Rev 12 2 2014 EA info elitescreens com 5 6 In Wall RJ 45 Module The RJ 45 Module connects to a local wall switch for UP Down control of your screen Please follow the picture diagram below for instructions on how to connect the accessory Elite Screens In Wall Switch Module ZIW Module Ethernet RJ45 network a cable not included p are o Gray Up q J EEA
7. 5 1245 203 548 118 1666 100 os sof 925 145 180 ITELOGHW2 E8 1061629 2260 2655 1320 203 1623 118 1741 100 98 sof o2s 145 180 TE120HW2 E8 2572 2967 1494 203 1797 118 1915 100 98 50 925 145 180 TE135HW2 E8 o 145 180 TE114XW2 E8 2370 276 180 ITE126xW2 8 2630 3025 1696 203 1999 118 2117 180 Unit inch View Case View Top Overall Case Case H 5 B3 Height B5 Width C1 ey C3 C4 A A2 C B1 B4 C ITELOOVW2 8 600 sof 719 46 766 39 39 20 364 57 74 ITE120VW2 EB 120143 960 37 720 so 839 46 885 39 39 20 364 57 74 ITELOOHW2 8 490 so 609 46 esel 39 39 20 364 57 74 ITELOGHW2 E8 106 1659 52o soj 639 46 685 39 39 20 364 57 74 ITE120HW2 E8 120 169 119 4 1013 1168 588 sof 707 46 754 39 39 20 364 57 71 The listed measurements are for general reference only Please contact Elite Screens to verify product design and dimensions before attempting to integrate its products with any structural or furniture modification Although a manufacturer may offer product advice it may be taken or disregarded at the integrator s discretion Elite Screens will not be held responsible or be otherwise liable for faulty installations Note Data error 1 Nominal Diagonal Nominal Model Diagonal Width A1 Length A3 A4 A5 Height Border B2
8. XCEPT AS PROVIDED IN THIS WRITTEN WARRANTY ELITE SCREENS INC SHALL NOT BE LIABLE FOR ANY LOSS INCONVENIENCE OR DAMAGE INCLUDING DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR INABILITY TO USE THE ELITE SCREENS PRODUCT OR FOR LOST DATA OR LOST SOFTWARE WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION MAY NOT APPLY In Canada warranties include both warranties and conditions Some jurisdictions do not allow limitations on how long an implied warranty lasts and some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages so the above limitations and exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from jurisdiction to jurisdiction International Warranty Elite Screens Inc does not provide warranty coverage outside of the United States or Canada For more information on the warranty coverage terms and conditions in your region contact your Elite Screens International Distributor directly Rev 12 2 2014 EA info elitescreens com 14
9. as loss of time loss of use or installation costs of defective repaired or replaced product This warranty does not cover product that has been damaged or rendered defective as a result of a neglect abuse or misuse b modification of the original product c improper use or installation of products not manufactured by Elite Screens d service provided by anybody other than Elite Screens e abnormal mechanical or environmental conditions f unusual physical or electrical stress including failure or fluctuation of electrical power lighting static electricity fire tornadoes or other natural disasters Elite Screens does not warrant against freight damage concealed or otherwise unless product is shipped directly from an Elite Screens facility You must contact the vendor and the delivering carrier to report freight damage within 7 days of receipt Failure to report freight damages within the carrier s guidelines may result in you bearing all costs THIS LIMITED WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES ELITE SCREENS INC DISCLAIMS ALL OTHER WARRANTIES WHETHER EXPRESS IMPLIED OR STATUTORY INCLUDING ANY WARRANTY OF MERCHANTABILITY ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTIES ARISING FROM A COURSE OF DEALING OR USAGE OF TRADE THIS LIMITED WARRANTY GIVES THE END USER SPECIFIC LEGAL RIGHTS AND THE END USER MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE E
10. e or concrete and will support the screen Use the Socket wrench D to attach the M8x40mm hexagonal screws The expanding bolts should be firmly tightened and tested to make sure that they will hold the weight of the screen Rev 12 2 2014 EA info elitescreens com 4 Insert the threaded rods C through the M8 expanding bolts and then attach the M8x40mm hexagonal screws with the washer E Last put the Hanging Bracket B through the threaded rod equal to the height of the screen s housing Once they are firmly in place as shown below make sure that they will hold the weight of the screen E and F Ceiling 5 Push the screen up into the space Use the threaded rods C to attach the screen assembly to the ceiling The hexagonal screws E will connect the screen to the rest of the assembly Once firmly in place use the nuts F to ensure a firm connection Use the socket wrench D to make sure that the bolts are firmly tightened Use the Socket wrench to attach the washer and the outside hex screws and then adjust the bottom of the screen to make it parallel with the ceiling and then fasten the screw a Ceiling Socket wrench H 6 Install end flange cover panel A between the gap and the screen to complete the installation Push the screen to the hole of the ceiling the screw across the hole of the end cap For Complete Dimensions Please Visit http www elitescreens com images pdf Dimension
11. ease refer to the image below for both 110v amp 220v wiring information Green Ground Z White Hot NS ji r Black Common Yellow Green Em i pa RA i Ground W 2 2 0 V Se Common a Gray HOT Rev 12 2 2014 EA info elitescreens com Assembly 2 Insert the Hex Screw B through the Hanging Bracket s C screw hole and secure with the Case Rail Nut A Slide the Hanging Bracket C through the railing on top of the case 3 Place the Suspension Bar D on the Hanging Bracket C and align with the hole as shown below Secure the Suspension Bar D with the Hex Screw B Washer E and the Hex Nut F Install the Suspension Bars D to your ceiling according to their distance D Ga Gus jo mse SS ee lj D C G eUl P Rev 12 2 2014 EA info elitescreens com Optional Suspension Bar J Hook G 1 Attach the Suspension Bar J Hook G to the bottom of the Suspension Bar D and secure with the Hex Screw B Washer E and Hex Nut F 2 Attach the Suspension Bar J Hook G to the Hanging Bracket C as shown in figure below Install the Suspension Bars D to your ceiling according to their distance RR lt V U 1 4 Lo Mn i gt VN o P IA SS RB IA 1 E WAN Wo iv WW
12. lite Screens is not liable for any faulty installations For limit adjustment instructions please contact our Technical Support Department at 877 511 1211 Ext 604 The Screen s Top Black Drop is already set to its maximum drop distance There is NO extra top black drop in the roller Please be aware of this as it will void the limitation of your warranty Individual modifications to this product are prohibited and will void the warranty with the manufacturer Please contact Elite Screens Customer Service for any questions NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that the interference will not occur on a particular installation If this equipment causes harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures v Reorient or relocate the receiving antenna of the device which may be casing the interference v Increase the separation between the screen and the
13. ot overload the power cord e The internal amp external parts of this unit are not end user serviceable Do not attempt to disassemble this unit by yourself No one except authorized technicians can open and make repairs to this unit e Make sure the power source that this unit is connected to has a continuous power flow e If there is need to use an extension cord make sure the cord has an equal rating as the appliance to avoid over heat e Do not handle the power plug when your hands are wet or your feet are in contact with water Do not use this unit under the following circumstances e Disconnect the power cord under the conditions of heavy rain wind thunder or lightning e Avoid direct sun light rain shower and moisture e Keep away from fire sources and high temperature to prevent this device from overheating e Cut off the power supply first before transportation or maintenance e To avoid possible injury and or an electric shock do not attempt to use this screen if there is obvious damage or if there are any evident broken parts Rev 12 2 2014 EA info elitescreens com 2 Installation Warning Due to various installation environments the instructions provided in this user s guide are for reference only Please consult a professional installation company for further installation and safety advice The installer must insure that proper mounting hardware is used to provide adequate strength suitable for the installation E
14. our claim after 7 days of receipt but within 30 days of receipt Elite Screens will at its option replace the part without charge but you will bear the cost of shipping and handling If you report your claim after 30 days of receipt you will bear all costs to replace the part Returns and Exchanges Ifa return is needed Elite Screens will issue you a Return Merchandise Authorization RMA Number This number is valid for 45 days from the date of issue and is required to process any returns A returned item sent to Elite Screens without a visible or valid RMA Number is subject to refusal by Elite Screens You are responsible for the cost of returning the item and ensuring the product is properly packaged to prevent damage in transit Once a returned product is received Elite Screens will at its option replace the product or part without charge including ground service freight The replacement product or part may be new or refurbished to the Elite Screens standard of quality and is subject to stock availability Elite Screens liability for replacement of the covered product will not exceed the original retail selling price of the covered product Exchange products and parts assume the remaining warranty period of the original product covered by this limited warranty What is Not Covered This warranty is not transferable and does not cover product purchased by another end user This warranty does not cover incidental damages such
15. sTable evanesce tension below dims pdf Rev 12 2 2014 EA info elitescreens com 13 Limited Warranty Policy What is Covered Elite Screens Inc Elite Screens warrants its products to the first retail purchaser if purchased new and operated in the United States or Canada to be free from defects in workmanship and materials except as provided below for a period of 2 years from the date of original purchase and 3 years for products purchased directly by educational non profit religious or government organizations Refurbished products purchased directly from Elite Screens are warranted for a period of 90 days from the date of original purchase For warranty service you must provide proof of purchase and the serial number of your product How to Get Service Should this product prove defective during the warranty period please visit www elitescreens com rmaform and submit a warranty claim form You must provide your proof of purchase the serial number of your product and describe the problem you are experiencing with your screen An Elite Screens representative will determine whether the product requires service and provide you with further instructions on how to proceed with your warranty claim Missing Parts If your product is missing parts Elite Screens will at its option replace the part without any charge including shipping and handling provided that that you report your claim within 7 days of receipt If you report y
Download Pdf Manuals
Related Search