Sencor SHW 3001 high-pressure cleaner
Contents
1. To clean the outer parts of the product use a soft cloth dipped in lukewarm water Do not use aggressive cleaning products and solvents as this could damage the surface of the product We recommend you regularly clean especially the nozzle of the working attachment To clean the nozzle use the included cleaning pin Nozzles with regulation it is necessary to first turn the nozzle until it is fully open Copyright 2010 Fast CR a s Revision 08 2010 High Pressure Cleaner SHW 3001 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION The product cannot be turned on The power plug is not inserted Faulty power socket Faulty extension cord Incorrect input voltage Power for the product is not turned on A grounding protection device is turned off if used The product is overheating due to insufficient water supply The pump keeps stopping Insert the power plug into the power socket Try using a different power socket Try using a different extension cord Check that the mains voltage corresponds to the product s specifications Turn on the product Reset the grounding protection device Check the amount of water supplied the hose should fill a 10 litre bucket in 1 minute Significant pressure fluctuations The nozzle is partially clogged Clean out the nozzle using a pin and flush it out from the front Blocked worn out nozzle Inappropriate water supply The product does not reach operating pressur2. High Pressure Cleaner User s manual SENCOR SHW 3001 Before first use please read all instructions contained in this user s manual carefully even if you are already familiar with using similar products Only use this product in accordance with the instructions described in the user s manual Keep the user s manual in a safe place where it can be easily retrieved for future use Save the original packaging including the internal packing material warranty card and proof of purchase receipt at least for the duration of the warranty If you need to ship this product pack it in the original cardboard box to ensure maximum protection during shipping or transport e g when moving or when you need to send this product for repair EN 1 Copyright 2010 Fast R a s Revision 08 2010 High Pressure Cleaner SHW 3001 CONTENTS IMPORTANT SAFETY NOTICE 3 INTRODUCTION r e iesin an Ceia TEE Ea O EAEE Aa AGTA r a TEO E S ASROR a 4 PRODUCT ceo ner wipe se eat E E naire ences 5 ASSEMBLING THE PRODUCT 6 INSTRUCTIONS FOR USE he ce cca elated 8 CLEANING AND MIAINIFEINAING Be 9 TROUBLESHOOTING a e 10 INCLUDED CONTENTS ioiii 10 TECHNICAC DETAILS 11 DISPOSAL OF USED ELECTRICAL A
3. ND ELECTRONIC 12 INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS 12 EN 2 Copyright 2010 Fast R a s Revision 08 2010 High Pressure Cleaner SHW 3001 IMPORTANT SAFETY NOTICE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Carefully unpack the product and take care not to throw away any part of the packaging before you find all the parts of the product This product must not be used by persons including children with physical or mental impairments or by inexperienced persons unless properly trained or schooled in the safe use of the product or unless they have been properly supervised by a qualified person who will be responsible for their safety Never use accessories that have not been delivered with this product or are not intended for it Under no circumstances should you try to repair or amend the product on your own danger of electric shock Entrust all repairs and adjustments to a specialised company service Tampering with the product during the warranty period may void the warranty Never use the product if you have wet hands or feet Only store and use the product away from flammable or volatile materials and solutions Keep the product away from extreme temperatures direct sunlight and excessive humidity Do not use in a du
4. aner A high pressure cleaner is in effect a powerful electric motor driving a set of pistons which force water to spray through a small nozzle This creates pressurised water current The pressure cleaner can be used for many kinds of work around the house and in the garden It is an effective work saving cleaning method for various types of surfaces This high pressure cleaner is designed so that the supplied cold water is sufficient for it Possible applications The main applications of this product are for cleaning work in the house 1 2 3 4 5 Washing cars motorcycles boats and bicycles Cleaning of terraces fences garden walls footpaths driveways and house fa ades Removal of algae and moss from roofs brickwork and gutters Cleaning of garden machines and equipment garden furniture and meat grills Hygienic cleaning of animal enclosures and surrounding areas Copyright 2010 Fast CR a s Revision 08 2010 High Pressure Cleaner SHW 3001 PRODUCT DESCRIPTION 2 A Main power switch Inlet valve with hosed adapter Pistol Pistol opening for attachment Bayonet of the working attachment Working attachment Spray diffuser Outlet valve START STOP trigger Pistol arrest High pressure hose High pressure hose end Copyright 2010 Fast CR 5 Revision 08 2010 High Pressure Cleaner SHW 3001 Warning A e Never use this hig
5. e Inlet hose is pressed down Blocked water filter Inlet hose is blocked Clean replace the nozzle Check the amount of water supplied Straighten the hose Clean the filter Check whether the hose is leaking or blocked The pistol trigger does not work The arrest is activated Deactivate the arrest INCLUDED CONTENTS 1 High pressure cleaner 2 High pressure hose 3 Pistol 4 Working attachment 5 Parking position holder 6 Inlet valve adapter 7 Cleaning needle EN 10 Copyright 2010 Fast CR 5 Revision 08 2010 High Pressure Cleaner SHW 3001 2 Parking position groove Inlet valve adapter 3 Cleaning needle TECHNICAL SPECIFICATIONS Nominal voltage rre AAAA EA AE KERERE ERARE FERE 220 240 V AC alternate current Nominal 50 Hz Rated power 1100 power WA 1300 W Maximum csore EEEN TE EEE E EEEE E 110 bar 11 MPa FOW rat ae Teea Un Ei 320 Maximum temperature of supplied water 40 C Length r 3 5 Operational range 9 5 length of water current NOISE E lt 85dB IPX5 Le
6. h pressure cleaner without first turning on the water supply the product can be damaged e When the high pressure cleaner is turned on the high pressure water jet coming out of the attachment can cause recoil Before turning on the high pressure cleaner hold the pistol firmly in your hand e Keep the high pressure hose attached to the high pressure cleaner for the entire time of operation because it is under pressure Disconnecting the high pressure hose while it is under pressure is dangerous e Never use the pistol without the attachment being attached e Always store the high pressure cleaner in a place where it will not freeze Frost may cause irreversible damage to the cleaner It is recommended to remove all water from the cleaner and all accessories including the inlet hoses before storage The warranty does not cover frost damage ASSEMBLING THE PRODUCT Method for connecting the high pressure hose to the pistol 1 Open the lock in the back part of the pistol by moving it in the downward direction 2 Insert the end of the high pressure hose into the pistol opening Make sure that it is fully inserted otherwise it is not possible to lock it in place Note e Due to pressure created the hose during operation and the perfect seal it is necessary to exert a greater force when inserting the hose ends into the pistol and if necessary fully insert the end using a rocking motion 3 Lock the end into position by moving the l
7. i ce your household waste disposal service or the shop where you purchased the product INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of used packaging material in a location determined by the municipality for the disposal of wastes C This product meets all the basic EU regulation requirements that relate it 12 Copyright 2010 Fast CR 5 Revision 08 2010
8. keep the product out of the reach of children Children must be supervised to ensure that they do not play with the product For increased safety we recommend you install a protective device against residual voltage with a sensitivity up to 30 mA talk to your electrician about installation options Pulling the power cord from the wall power outlet by force may cause damage In order to avoid damage to the hose do not step on it or forcefully bend it Do not use the product if the hose is bent or damaged in any way Do not move over the power cord with the product This product is equipped with a thermal fuse if the motor or the pump overheat then the thermal fuse will turn the product off As soon as the motor or pump cool down it will be possible to turn the product on again High pressure current can be dangerous if used incorrectly It is forbidden to direct the current at other people one s self animals electric devices or the high pressure cleaner itself Neither the pistol nor the attachment may be placed near ears or eyes If it is necessary to use an extension cord to the power mains the extension cord must be waterproof The manufacturer takes no responsibility for damages caused by the incorrect use of this product and its accessories injuries burns scalding fire food spoilage etc Copyright 2010 Fast CR a s Revision 08 2010 High Pressure Cleaner SHW 3001 INTRODUCTION What is a high pressure cle
9. ngth of power CONG seein inn RAEE E A Aaa AREE EREA EaR ARAE EEA EE A EEEE EARRA HERRER EA 5m Dimensions width x depth x height 216 x 195 x 432 mm Weight without attached accessories 4 8kg Weight with the accessories 5 7kg Amendments to text and technical parameters are reserved EN 11 Copyright 2010 Fast R a s Revision 08 2010 High Pressure Cleaner SHW 3001 DISPOSAL OF USED ELECTRICAL amp ELECTRONIC EQUIPMENT The meaning of the symbol on the product its accessory or packaging indicates that this product shall not be treated as household waste Please dispose of this equipment at your applicable collection point for the recycling of electrical amp electronic equipments waste In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product By ensuring the correct disposal of this product you will help prevent potentially hazardous to the environment and to human health which could otherwise be caused by unsuitable waste handling of this product The recycling of materials will help conserve natural resources Please do not therefore dispose of your old electrical and electronic equipment with your household waste For more detailed information about recycling of this product please contact your local city off
10. ock downwards 4 Move the high pressure hose guard all the way up to the pistol opening and turn clockwise so that it is arrested Opening for the end High pressure hose guard High pressure hose end Lock Method for connecting the attachment to the pistol 1 Insert the working attachment into the pistol so that the lugs fit inside the openings inside the pistol 2 Now gently press the working attachment into the pistol and turn it 90 3 The working attachment will be arrested the pistol Warning e Before operation ensure that the attachment is safely arrested the pistol Copyright 2010 Fast CR a s Revision 08 2010 High Pressure Cleaner SHW 3001 Spray diffuser Working attachment Bayonet Opening in the pistol for the attachment of the working attachment Pistol Connecting the hoses 1 Screw the end of the high pressure hose pic D on to the inlet valve of the high pressure cleaner pic A 2 Now connect the inlet valve of the garden hose to the appropriate screw end or quick release coupling In the case of the quick release coupling you can use a screw adapter which is included with this product Warning e Before connecting check that the inlet hose is not under pressure and that the water tap is turned off High pressure hose end Copyright 2010 Fast CR a s Revision 08 2010 High Pressure Cleaner SHW 3001 INSTRUCTIONS FOR USE 1 Ensure that the main swi
11. sty environment Do not place the product near heaters open fires or other appliances or equipment that are sources of heat Do not use the product for purposes other than those intended Before connecting the product to the power outlet ensure that the voltage on the label is the same as that in the power outlet Do not place the power cord near hot places or sharp objects Do not place heavy objects on the power cable Position the cord so that it will not be stepped on or tripped over Make sure the power cord is not touching a hot surface If the power cord of the product is damaged have it repaired by an authorised service technician to prevent causing a dangerous situation It is forbidden to use a product with a damaged power cord or plug Do not disconnect the power cord from the wall outlet by pulling the cord Do not spray the product with water or any other liquid Do not pour water or any other liquids into the product Do not submerge the product in water or any other liquid Never use the product near a bathtub wash basin or any other container filled with water If you are not using the product or if you know that you will not be using it soon turn it off and disconnect the power cord from the wall socket Prior to cleaning proceed in the same manner Never leave the product switched on without supervision Before storing always allow the product to fully cool down Use extra care if the product is used near children Always
12. tch is in position 0 2 Connect to power cord to the power socket 3 Hold the pistol with the attached working attachment in your hand 4 Fully open the water tap on the water supply Warning e Do not yet turn the main switch on the high pressure cleaner 5 Now press the pistol trigger 6 After pushing all air out of the hoses water will start to flow from the nozzle 7 Only now move the main switch to position 1 8 Hold the pistol together with the working attachment in your hand point at the desired location press the trigger and you can start working The recommended distance between the nozzle and the surface being cleaned is at least 30 cm vi Q If you need to arrest the operation of the cleaner full press the pistol trigger and at the same time press the arrest lock pic Using the parking positions This cleaner lets you store park your accessories 1 To store the work attachment you can use one of the two grooves of the parking positions pic E 3 2 To store the pistol itself without the attached working attachment you can use the parking position holder Copyright 2010 Fast R a s Revision 08 2010 High Pressure Cleaner SHW 3001 Working attachment 4 Parking position holder Pistol 5 Parking position pocket Parking position groove CLEANING AND MAINTENANCE Warning e Before cleaning disconnect this product from the power source
Download Pdf Manuals
Related Search