Hoover GL71GL01001 vacuum cleaner
Contents
1. Combine accessories depending on use 2 Remove the hose from the foot of the cleaner and insert into the removable handle Crevice tool IMPORTANT When using cleaning tools the cleaner must be kept in the upright position particularly when cleaning stairs CLEANING THE STAIRS HANDLE PARK It is dangerous to place the cleaner above you when For more efficient storage press the handle cleaning stairs Place the cleaner against the bottom release button on the rear of the product and push step downwards ALWAYS work with the cleaner below you IMPORTANT Extra care must be taken when using the hose on the stairs If the hose becomes blocked it can exert a strong pull in the direction of the cleaner gt A MI E NG EMPTYING THE DUST BIN ALLERGY AND ASTHMA SUFFERERS Lift the bin release latch and remove the dust When emptying any vacuum cleaner it is difficult to bin from the cleaner avoid exposure to dust To minimize this risk please follow these instructions Wrap the lower bin in a plastic bag and close the bag tightly around the dust container before emptying e Hold the container using the carry handle over the bin and press the bin empty button The dust container door will automatically open Press the bin empty button to empty the dust into the plastic bag Close the bag quickly and dispose of it immediately Once emptied gently tap2. with a unique steering at the rear of the cleaner with your foot Ensure that the cleaner is in the upright parked function that allows you to easily manoeuvre the position and move the selector to the required machine Particularly beneficial for cleaning in setting for the carpet type or floor covering awkward or confined spaces To obtain the best performance and energy Twist the cleaner in the direction you wish to efficiency it is recommended that the adjustment turn setting position 1 is used for the main cleaning operations The other adjustment settings are for ease of use use on longer pile carpets or for specialist cleaning tasks After use return the cleaner to the upright lock position You will hear an audible click once locked in place Settings 1 Best performance and energy efficiency short to POWER SWITCH medium pile carpets hard wooden floors wooden floor boards with crevices ceramic tiles To switch the cleaner on or off press the power switch 2 Medium pile carpets delicate floor coverings on the main body of the cleaner such as vinyl or linoleum parquet flooring i 3 For longer pile carpets the motion resistance may increase Use these intermediate settings to reduce the force required to push the vacuum cleaner 4 Luxury carpet and Tool mode IMPORTANT Using this cleaner for loop pile carpets with pile greater than 30mm is not recommended Please consult the floorcare carpet CORD STORAGE m
3. HOOVER GENERATION FUTURE USER MANUAL IMPORTANT SAFETY REMINDERS This appliance should only be used for domestic cleaning as described in this user guide Please ensure that this guide is fully understood before operating the appliance Do not leave the appliance plugged in Always switch off and remove the plug from the socket after use or before cleaning the appliance or any maintenance task This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance Cleaning and user maintenance shall not be made by children without supervision If the power cord is damaged stop using the appliance immediately To avoid a safety hazard an authorised Hoover service engineer must replace the power cord Keep hands feet loose clothing and hair away from rotating brushes Use only attachments consumables or spares recommended or supplied by Hoover When using cleaning tools ensure that the appliance is kept in the upright parked position This will avoid possible damage to the carpet or floor covering When cleaning stairs do not position the appliance above you Static electricity some carpets can cause a small build up of static electricity Any s
4. anufacturer s recommended cleaning instruction before vacuuming N DON IMPORTANT When cleaning delicate hard floors Turn the cleaner off and remove the plug Wind the CARPET CARE CONTROL SELECTOR such as vinyl or linoleum the selector switch must cord around the cord storage hooks be moved to position 2 Failure to do so may cause The carpet care control selector raises and lowers damage to the floor surface the height of the nozzle Rotate the storage hooks to quickly release the full length of the power cord This vacuum cleaner is supplied with an Energy Label as required by European Regulation EU 665 2013 If the label shows a red prohibition circle on the right covering the hard floor symbol then this indicates that the vacuum cleaner is not suitable for use on hard floors INOTE Dust pick up ability carpet dust pickup ability hard floor and energy efficiency in accord with Commission Regulations EU 665 2013 and EU 666 2013 HANDLE RELEASE CLEANING TOOLS To clean with accessories release the handle The following accessories are available with the product from the main body of the cleaner by pressing Dusting Brush the handle release button on the rear of the Pet Hair Remover Turbo Brush cleaner and pull upwards Parquet Nozzle amp Tube Multi Function Tool certain models only All accessories can fit directly onto the removable handle crevice tool or on to the hose
5. ckage see the instruction on P12 5 Are the filters blocked To clean filters see the instruction on P10 6 Are the brushes rotating correctly To check the brushes see the instructions on p12 7 Has the cleaner overheated If so it will take about 30 minutes to reset working order has not been assembled in accordance with these instructions or has been used incorrectly WARNING A thermal cut out switches off the cleaner to prevent overheating if it is used when full or there is a blockage or dirty filters If this should happen switch off unplug and correct the fault It will take about 45 minutes for the cut out to automatically reset IMPORTANT Do not run cleaner over the supply cord as this could damage the supply cord insulation 12 IMPORTANT INFORMATION Hoover Service Should you require service at any time please contact your local Hoover Service Office Hoover spares and Consumables Always replace parts with genuine Hoover spares These are available from your local Hoover dealer or direct from Hoover When ordering parts always quote your model number Quality Hoover s factories have been independently assessed for quality Our products are made using a quality system which meets the requirements of ISO 9001 GUARANTEE STATEMENT The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold Details regarding these conditions can be obtained fr
6. fit filter only when completely dry DO NOT USE HOT WATER OR DETERGENTS IMPORTANT For optimum performance always keep your filters clean We recommend that the exhaust filter should be washed every 3 MONTHS IMPORTANT For optimum performance CLEANING THE SEPARATION SYSTEM always keep your separation system clean Lift the bin release latch and Place the bin on a flat surface Remove the BLUE filter pack Unscrew the retaining lock to remove the dust bin from the and lift latch to access the filter containing the flexible HEPA release the separation system cleaner filter pad Remove the turbo tool from the top cover of the cleaner Press the bin empty button to Pull the separation system out Clean the separation system open the bin flap of the bin with a dry cloth or dusting brush Once clean reassemble and refit to the cleaner 10 CHANGING THE AGITATOR AND BELT If your cleaner is not picking up efficiently the belt or brushes or both may need replacing but first please make sure you have lt Emptied the dust container IMPORTANT Switch the cleaner off and remove the plug from e Cleaned the filters e Checked for blockages o Remove the carpet care control knob Turn the cleaner over and remove the retaining screws attaching the brush guard to the base Remove brush assembly and check for wear on the belt Loop the new belt around the motor and brush assembly the electr
7. icity supply before dismantling cleaner Hold the brush assembly and stretch the belt until the brush can be slotted back into the cleaner housing Refit the hood ensuring the lugs along the front are located in the slots on the front edge of the baseplate Secure the hood with the retaining screws Refit the carpet care control knob CLEARING A BLOCKAGE IMPORTANT Switch the cleaner off and remove the plug from the electricity supply before dismantling cleaner Check the hose by removing it from the handle stretching it to full length Turn the cleaner over and rotate the brushes until they are free to rotate If debris can be seen under the hood remove the indicated retaining screws and clear the debris Check for a blockage in the lower hose socket To remove the hose pull the finger tab and pull the hose upwards Use a flexible rod to remove any obstruction Open the pet hair or allergen remover by removing the retaining screws Lift the cover and remove the blockage User checklist If your cleaner is not working properly run through the following checklist 1 Is there a working electricity supply to the cleaner Check with another electrical product 2 Is the dust bin full or choked with fine dust To empty the dust container see instructions on P9 3 Is the hose blocked To clear a blockage see instructions on P12 4 ls there a blockage in the cleaner base To clear a blo
8. ing of electrical and electronic equipment Disposal must be carried out in accordance with local ms environmental regulations for waste disposal For more detailed information about treatment recovery and recycling of this appliance please contact your local city office your household and waste disposal service or the shop where you purchased the appliance C HOOVER Limited Pentrebach Merthyr Tydfil Mid Glamorgan CF48 4TU UK This appliance complies with the European Directives 2006 95 EC 2004 108 EC and 2011 65 EU GETTING TO KNOW YOUR CLEANER The ultra agile way to clean all surfaces This vacuum cleaner is supplied with an Energy Label as required by European Regulation EU 665 2013 Certain models only PARQUET NOZZLE TURBO BRUSH STORED ON BOARD CARRY HANDLE BIN RELEASE HANDLE DUST BIN EXHAUST FILTER MULTI FUNCTION PET HAIR REMOVER TURBO BRUSH TOOL REMOVABLE HANDLE CREVICE TOOL HANDLE RELEASE BUTTON a uy ON OFF BUTTON CORD STORAGE AN HOOKS A PRE MOTOR FILTER ACCESS BUTTON DUSTING BRUSH a mA VIZII FLEXIBLE HOSE ZT N D L 3 N Eo SA ES Y y UPRIGHT LOCK E RELEASE PEDAL N Y Dy XY NG CARPET CARE CONTROL SELECTOR PREPARING YOUR CLEANER Remove the accessories from the Take the foot of the cleaner and press Insert the internal powe
9. om the dealer from whom the appliance was purchased The bill of sale or receipt must be produced when making any claim under the terms of this guarantee Subject to change without notice Y GENERATION FUTURE Hoover Limited Pentrebach Merthyr Tydfil Mid Glamorgan CF48 4TU HOOVER CUSTOMER HELPINE 08444 995 599 2014 48011581
10. or shake the container to release any excess dust E IMPORTANT Do not fill above the max level mark shown on the bin MAX CLEANING THE EXHAUST FILTER ED Lift the tab on the exhaust filter cover grille and remove from the cleaner CLEANING THE PRE MOTOR FILTERS IMPORTANT For optimum performance e always keep your filters clean Lift the bin release latch and Place the bin on a flat surface Remove the BLUE filter pack remove the dust bin from the and lift latch to access the filter containing the flexible HEPA cleaner filter pad Remove the turbo tool from the top cover of the cleaner Separate the flexible HEPA filter pad from the filter frame by pulling the tab or pushing from underneath Gently tap the flexible HEPA filter pad against the side ofa bin to release excess dust Wash the flexible HEPA filter pad thoroughly under hand warm water gently squeezing the pad until the water runs clean Remove excess water by squeezing and leave to dry for 24 hours DO NOT USE HOT WATER OR DETERGENTS When completely dry reassemble and refit filters to cleaner uu e IMPORTANT For optimum performance shake off excess dust from the filters regularly We recommend that the flexible HEPA filter pad is washed every 3 MONTHS gt 0 Wash the exhaust filter under hand warm water until the water runs clean Remove excess water by shaking and leave to dry for 24 hours Re
11. r plug on the main main packaging You should find the the upright lock release pedal Lower body into the YELLOW socket located in following the neck to the floor the neck of the cleaner Removable Handle Crevice Tool Dusting Brush Hose Pet Hair Remover Turbo Nozzle Parquet Nozzle amp Tube Multi Function Tool Certain Models only Ensuring the cable is not trapped Ensure both halves of the neck are Attach the connector hose to the foot of assemble the main body to the foot of 6 pushed together and the locking clips the cleaner the cleaner are fully engaged PREPARING YOUR CLEANER Position the cleaner in the upright position Then attach the other end of the connector hose to the main body of the cleaner Secure the dusting brush onto the dusting brush post Position the hose in the hose cradle and clip it in place Secure the turbo brush onto the U separator lid Certain models only D A Position the handle at the top of the main body Depress the handle release button and slide the handle down until it clicks into place IMPORTANT If you need to access the internal electric power connector press the upright lock release pedal and lower the main body to the floor Release the locking clips for access Mies UPRIGHT LOCK RELEASE CARPET CARE CONTROL SELECTOR ACTIVE STEERING Unlock the cleaner by pressing the upright lock pedal The cleaner comes
12. tatic discharge is not hazardous to health Do not use your appliance out of doors or on any wet surface or for wet pick up Do not pick up hard or sharp objects matches hot ashes cigarette ends or other similar items Do not spray with or pick up flammable liquids cleaning fluids aerosols or their vapours Do not run over the power cord when using your appliance or remove the plug by pulling on the power cord Do not continue to use your appliance if it appears faulty Hoover service To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised Hoover service engineer Do not stand on or wrap the cord around arms or legs when using your appliance Do not use the appliance to clean animals or people When using the cleaning tools ensure to always steady the appliance with your other hand This will ensure that the appliance does not fall while in use WARNING A thermal cut out switches off the appliance to prevent overheating if it is used when full or there is a blockage or dirty filters If this should happen then switch off unplug and correct the fault It will take approximately 45 minutes for the cut out to automatically reset The Environment The symbol on this appliance indicates that this appliance may not be treated as household waste Instead it must be handed over to the E applicable collection point for the recycl
Download Pdf Manuals
Related Search