Myfox TA4007
Contents
1. light measurement the sensor must be placed far from any light source that could affect the readings such as television sets computer screens night lights etc 4 Wall mounting plate or standing on a surface The sensor can be secured to its wall mounting plate or can stand on a flat surface The face with the sensor s reading eye must be the most exposed to light nw In the wall mounted position the sensor is clipped to its plate when the plate is properly mounted Check that it is properly fastened by listening for a click when it snaps into place The plate and sensor must be kept away from any risk of contact with water and electricity 2 Connection to the main unit Go into learning mode on your main unit Remove the battery protection tab located behind the sensor The main unit emits an audible signal to confirm successful connection 3 Battery replacement and wall mounting Batteries Use a screwdriver to open the battery hatch at Installing the sensor on the wall use SN OEEO double sided adhesive strip to secure the 2z ica plate to the wall or use screws as follows l drill a hole in the wall install the wall plug t o Ti PEA WA and insert the screw supplied leaving a 5 mm seem ie correct CN gap between the screw head and the wall Cat No TA 4007 Note Replacing the batteries with the wrong type of battery will Place the slot on the head of the screw The orientation polarit2. EN TEMPERATURE AND IT PT GR ES NL PL LIGHT SENSOR Internet user interface User Instructions 1 Description and functionality 1 Battery protection tab Remove the tab to power the sensor and trigger the connection to the main unit The sensor operates with two AA LR6 alkaline batteries It detects when the batteries are low and alerts the user 2 Temperature sensor function The sensor measures the ambient temperature to within one tenth of a degree and sends it to the main unit Home automation scenarios can therefore be linked to reaching or exceeding a temperature threshold Warning for optimum temperature measurement the sensor must be placed far from any heat source that could affect the readings 3 Light sensor function The sensor measures the ambient light and sends the reading to the main unit The user is invited to select a reference threshold from five possible choices configurable in the user interface from full brightness to total darkness This threshold can be adjusted at any time and home automation scenarios can therefore be linked to reaching or exceeding the chosen threshold Full brightness strong luminosity from direct exposure to the sun or a strong light fixture Daylight ambient brightness in the middle of the day Low light ambient brightness which might not be sufficient for comfortable reading Twilight light level requiring the use of light fixtures Darkness absence of light Warning for optimum
3. y sensor and plate cannot be flush mounted 4 Technical characteristics cause a risk of explosion Dispose of used batteries in Frequency Radio 433 92 MHz accordance with instructions Range 150 m in free field See ew UREO ANE alot A MEAE TAG Technologies declares that this product complies with the main unit C E essential requirements of R amp TTE Directive 1999 5 EC A full Perang vempearaiure 10 C to 50 C version of the declaration of compliance is available from Maximum operating altitude 2000 m www myfox fr certificats Impact protection factor IP 33 Batteries Two AA LR6 alkaline batteries i When sorting your waste please observe the disposal Battery life 2 years regulations in force Please place waste in the facilities provided Dimensions L 100 mm x W 50 mm x D 25 mm for that purpose and with all due respect for the environment Weight 125 g TAG Technologies S A S EMAIL contact tag technologies com Regent Park Il Bat 1 Rue du Lac HOTLINE 33 0 5 61 00 07 11 31670 Lab ge France 33 0 TAG Technologies All rights reserved 121105 V1 1
Download Pdf Manuals
Related Search